journal article·2020-04-10Open access

The Role of Poly(Methyl Methacrylate) in Management of Bone Loss and Infection in Revision Total Knee Arthroplasty: A Review

Leyla Hasandoost, Omar Rodriguez, Adel Alhalawani, Paul Zalzal, Emil H. Schemitsch, Stephen D. Waldman, Marcello Papini, Mark R. Towler

Abstract

Poly(methyl methacrylate) (PMMA) is widely used in joint arthroplasty to secure an implant to the host bone. Complications including fracture, bone loss and infection might cause failure of total knee arthroplasty (TKA), resulting in the need for revision total knee arthroplasty (rTKA). The goals of this paper are: (1) to identify the most common complications, outside of sepsis, arising from the application of PMMA following rTKA, (2) to discuss the current applications and drawbacks of employing PMMA in managing bone loss, (3) to review the role of PMMA in addressing bone infection following complications in rTKA. Papers published between 1970 to 2018 have been considered through searching in Springer, Google Scholar, IEEE Xplore, Engineering village, PubMed and weblinks. This review considers the use of PMMA as both a bone void filler and as a spacer material in two-stage revision. To manage bone loss, PMMA is widely used to fill peripheral bone defects whose depth is less than 5 mm and covers less than 50% of the bone surface. Treatment of bone infections with PMMA is mainly for two-stage rTKA where antibiotic-loaded PMMA is inserted as a spacer. This review also shows that using antibiotic-loaded PMMA might cause complications such as toxicity to surrounding tissue, incomplete antibiotic agent release from the PMMA, roughness and bacterial colonization on the surface of PMMA. Although PMMA is the only commercial bone cement used in rTKA, there are concerns associated with using PMMA following rTKA. More research and clinical studies are needed to address these complications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopedic Infections and Treatments · Total Knee Arthroplasty Outcomes · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering and Architectural Science, Biomedical Engineering Program, Ryerson University, Toronto, ON M5B 2K3, Canada

Li Ka Shing Knowledge Institute, St. Michael’s Hospital, Toronto, ON M5B 1W8, Canada

Department of Mechanical & Industrial Engineering, Ryerson University, Toronto, ON M5B 2K3, Canada

Faculty of Health Sciences, Department of Surgery, McMaster University, Hamilton, ON L8S 4L8, Canada

Oakville Trafalgar Memorial Hospital, Oakville, ON L6J 3L7, Canada

Department of Surgery, University of Western Ontario, London, ON N6A 4V2, Canada

Department of Chemical Engineering, Ryerson University, Toronto, ON M5B 2K3, Canada

Funding

CIHR/NSERC - Collaborative Health Research Projects (356780-DAN). Synthesis of Bioactive Augments for use in Revision Knee Joint Replacement.

References (100+)

Show source-provided references
1. Revision total knee arthroplasty: Planning, management, and controversies
2. Revision total knee arthroplasty: The end of the allograft era?10.1007/s00590-015-1615-4 ↗
3. Canadian Institute for Health Information (2018). Hip and Knee Replacements in Canada, 2016–2017: Canadian Jt. Replacement Registry Annual Report, CIHI.
4. Why are total knee arthroplasties failing today--has anything changed after 10 years?10.1016/j.arth.2013.07.024 ↗
5. The management of bone loss in revision total knee replacement10.1302/0301-620X.90B8.19948 ↗
6. Bone loss with revision total knee arthroplasty: Defect classification and alternatives for reconstruction
7. Review article: Treatments for bone loss in revision total knee arthroplasty10.1177/230949901202000116 ↗
8. Bone loss management in total knee revision surgery10.1007/s00264-013-2262-1 ↗
9. Springer, B.D., and Curtin, B.M. (2015). Revision Total Knee Arthroplasty: Management of Bone Loss. Complex Primary and Revision Total Knee Arthroplasty, Springer International Publishing.10.1007/978-3-319-18350-3 ↗
10. Properties of acrylic bone cement: State of the art review10.1002/(SICI)1097-4636(199722)38:2<155::AID-JBM10>3.0.CO;2-C ↗
11. An articulated antibiotic spacer used for infected total knee arthroplasty: A comparative in vitro elution study of Simplex® and Palacos® bone cements10.1016/j.orthres.2004.03.003 ↗
12. Acrylic bone cement: Current concept review10.1007/s12306-013-0293-9 ↗
13. An intraoperatively moulded PMMA prostheses like spacer for two-stage revision of infected total knee arthroplasty10.1016/j.knee.2010.09.002 ↗
14. Long-term elution of antibiotics from bone-cement: An in vivo study using the prosthesis of antibiotic-loaded acrylic cement (PROSTALAC) system10.1016/S0883-5403(98)90179-6 ↗
15. Antibiotic-loaded bone cement for infection prophylaxis in total joint replacement10.2106/JBJS.E.01126 ↗
16. Polymethylmethacrylate bone cements and additives: A review of the literature10.5312/wjo.v4.i2.67 ↗
17. Termination mechanism of the radical polymerization of acrylates10.1002/marc.201500677 ↗
19. Temperature elevation caused by bone cement polymerization during vertebroplasty10.1016/S8756-3282(99)00127-1 ↗
20. Polymerization of acrylic bone cement using differential scanning calorimetry10.1016/S0142-9612(97)00060-4 ↗
21. Mechanical strength of trabecular bone at the knee
22. Biomechanics and Mechanobiology of Trabecular Bone: A Review10.1115/1.4029176 ↗
23. Rodríguez-Merchán, E.C., and Oussedik, S. (2015). Total Knee Arthroplasty: A Comprehensive Guide, Springer.10.1007/978-3-319-17554-6 ↗
24. Causes and Clinical Outcomes of Revision Total Knee Arthroplasty10.5792/ksrr.16.035 ↗
25. Why do revision knee arthroplasties fail?10.1016/j.arth.2008.04.020 ↗
26. Postler, A., Lützner, C., Beyer, F., Tille, E., and Lützner, J. (2018). Analysis of Total Knee Arthroplasty revision causes. BMC Musculoskelet. Disord., 19.10.1186/s12891-018-1977-y ↗
27. What Are the Causes of Revision Total Knee Arthroplasty in Japan?10.1007/s11999-013-2820-2 ↗
28. Failure following revision total knee arthroplasty: Infection is the major cause10.1007/s00264-010-1134-1 ↗
29. Stem Fixation in Revision Total Knee Arthroplasty: Indications, Stem Dimensions, and Fixation Methods10.5792/ksrr.18.019 ↗
30. Management of bone loss: Augments, cones, offset stems10.1097/01.blo.0000214437.57151.41 ↗
31. Trends in bone graft use in the United States10.3928/01477447-20140825-54 ↗
32. The problem in total joint arthroplasty: Aseptic loosening10.2106/00004623-199306000-00001 ↗
33. Fixation and loosening of hip prostheses10.3109/17453679108996658 ↗
34. Aseptic loosening of total joint replacements: Mechanisms underlying osteolysis and potential therapies10.1186/ar2170 ↗
35. Aseptic loosening10.1038/sj.gt.3302202 ↗
36. The basic science of periprosthetic osteolysis
37. The counterface, surface smoothness, tolerances, and coatings in total joint prostheses10.1097/00003086-199912000-00010 ↗
38. Biological response to prosthetic debris10.5312/wjo.v6.i2.172 ↗
39. Analysis of third body particles generated during total knee arthroplasty: Is metal debris an issue?10.1016/j.knee.2008.01.002 ↗
40. The biological response to orthopedic implants for joint replacement. II: Polyethylene, ceramics, PMMA, and the foreign body reaction10.1002/jbm.b.33676 ↗
41. How Much Sterile Saline Should be Used for Efficient Lavage During Total Knee Arthroplasty? Effects of Pulse Lavage Irrigation on Removal of Bone and Cement Debris10.1016/j.arth.2006.02.078 ↗
42. Polymethylmethacrylate particles inhibit osteoblastic differentiation of MC3T3-E1 osteoprogenitor cells10.1002/jor.20618 ↗
43. Thermal isotherms in PMMA and cell necrosis during total hip arthroplasty
44. The Effect of PMMA Thickness on Thermal Bone Necrosis around Acetabular Sockets10.1177/095441199420800106 ↗
45. Thermally induced bone necrosis in rabbits. Relation to implant failure in humans10.1097/00003086-198406000-00044 ↗
46. The role of polymethylmethacrylate bone cement in modern orthopaedic surgery10.1302/0301-620X.89B7.19148 ↗
47. Conduction analysis of cement interface temperature in total knee arthroplasty
48. Shrinkage stresses in bone cement10.1016/S0142-9612(03)00055-3 ↗
49. A theoretical and experimental analysis of polymerization shrinkage of bone cement: A potential major source of porosity10.1002/1097-4636(200010)52:1<210::AID-JBM27>3.0.CO;2-R ↗
50. Dimensional behavior of curing bone cement masses
51. The dynamic volume changes of polymerising polymethyl methacrylate bone cement10.3109/17453670209178037 ↗
52. Orr, J.F., and Dunne, N. (2004). Measurement of Shrinkage Stresses in PMMA Bone Cement. Appl. Mech. Mater., 1–2.10.4028/www.scientific.net/AMM.1-2.127 ↗
53. Residual stress due to curing can initiate damage in porous bone cement: Experimental and theoretical evidence10.1016/S0021-9290(01)00216-0 ↗
54. Management of bone defects in revision total knee arthroplasty10.2106/JBJS.L00143 ↗
55. Review Article: Bone Defect Classifications in Revision Total Knee Arthroplasty10.1177/230949901101900223 ↗
56. Classification and Preoperative Radiographic Evaluation: Knee
57. Management of metaphyseal bone loss in revision knee arthroplasty
58. Value of preoperative radiographic evaluations on knee bone defects for revision arthroplasty10.1590/S0102-36162012000600007 ↗
59. Tibial component fixation in deficient tibial bone stock10.1097/00003086-198404000-00049 ↗
60. Bone Loss in Revision Total Knee Arthroplasty: Evaluation and Management10.5435/JAAOS-D-15-00660 ↗
61. Use of screws and cement in revision TKA with primary or revision specific prosthesis with up to 17 years followup10.1016/j.arth.2014.07.027 ↗
62. Tria, A.J., Scuderi, G.R., and Cushner, F.D. (2018). Management of Tibial Bone Loss. Complex Cases Total Knee Arthroplasty Compend, Springer International Publishing.10.1007/978-3-319-69380-4 ↗
63. Repair of defects and containment in revision total knee replacement: A comparative biomechanical analysis10.1302/0301-620X.91B2.21415 ↗
64. Size matters: Defining critical in bone defect size!10.1097/BOT.0000000000000978 ↗
65. Lombardi, A.V., Berend, K.R., and Adams, J.B. (2010). Management of Bone Loss in Revision TKA: It’s a Changing World. Orthopedics, 33.10.3928/01477447-20100722-37 ↗
66. Screw and cement fixation of large defects in total knee arthroplasty10.1016/S0883-5403(86)80050-X ↗
67. Scuderi, G.R., and Tria, A.J. (2006). Surgical Techniques in Total Knee Arthroplasty, Springer Science & Business Media.10.1007/0-387-33531-5 ↗
68. Stemmed Implants Improve Stability in Augmented Constrained Condylar Knees10.1007/s11999-008-0424-z ↗
69. Tibial revision knee arthroplasty: Influence of modular stems on implant fixation and bone flexibility in AORI Type T2a defects10.5301/ijao.5000530 ↗
70. Bone loss in total knee arthroplasty: Graft augment and options11No benefits or funds were received in support of this study10.1016/j.arth.2004.03.002 ↗
71. The Role of Stems and Augments for Bone Loss in Revision Knee Arthroplasty10.1016/j.arth.2007.02.008 ↗
72. The influence of stem length and fixation on initial femoral component stability in revision total knee replacement10.1302/2046-3758.111.2000107 ↗
73. Are Cementless Stems More Durable Than Cemented Stems in Two-stage Revisions of Infected Total Knee Arthroplasties?10.1007/s11999-013-3139-8 ↗
74. Revision total knee arthroplasty: Should tibial stems be cemented or uncemented?10.1016/S0968-0160(97)10012-6 ↗
75. Pain at the end of the stem after revision total knee arthroplasty10.1097/00003086-199910000-00027 ↗
76. Stem Fixation in Revision Total Knee Arthroplasty: A Comparative Analysis10.1097/01.blo.0000093032.56370.4b ↗
77. Comparable Stability of Cemented vs Press-Fit Placed Stems in Revision Total Knee Arthroplasty with Mild to Moderate Bone Loss: 6.5-Year Results From a Randomized Controlled Trial with Radiostereometric Analysis10.1016/j.arth.2016.06.003 ↗
78. Effect of Stem Size and Fixation Method on Mechanical Failure After Revision Total Knee Arthroplasty10.1016/j.arth.2017.04.055 ↗
79. Stem length in revision total knee arthroplasty10.1007/s12178-015-9297-4 ↗
80. Revision total knee arthroplasty with cemented components and uncemented intramedullary stems10.1016/S0883-5403(03)00301-2 ↗
81. Managing bone loss in revision total knee arthroplasty
82. Healing potentials of polymethylmethacrylate bone cement combined with platelet gel in the critical-sized radial bone defect of rats10.1371/journal.pone.0194751 ↗
83. Diagnosis and management of infection after total knee arthroplasty
84. Risk Factors for Infection After Knee Arthroplasty: A Register-Based Analysis of 43,149 Cases10.2106/JBJS.G.01686 ↗
85. Revision Total Knee Arthroplasty Infection: Incidence and Predictors10.1007/s11999-010-1308-6 ↗
86. [Revision knee arthroplasty due to aseptic loosening]10.55095/achot2007/001 ↗
87. Revision of Infected Total Knee Arthroplasty: Two-Stage Reimplantation Using an Antibiotic-Impregnated Static Spacer10.4055/cios.2013.5.3.180 ↗
88. Nagra, N., Hamilton, T., Ganatra, S., W Murray, D., and Pandit, H. (2015). One-stage versus two-stage exchange arthroplasty for infected total knee arthroplasty: A systematic review. Knee Surg. Sports Traumatol. Arthrosc. Off. J. ESSKA, 24.10.1007/s00167-015-3780-8 ↗
89. Developing a strategy to treat established infection in total knee replacement10.1302/0301-620X.94B7.28710 ↗
90. Aguas, M., Dannhauser, W., Fox, R., Scalzi, M., and Verdi, S. (2013, January 5–7). A Novel Technique to Remove Bone Cement in Reoperative Revision Knee Arthroplasty. Proceedings of the 2013 39th Annual Northeast Bioengineering Conference, Syracuse, NY, USA.10.1109/NEBEC.2013.43 ↗
91. Single-Stage Hip and Knee Exchange for Periprosthetic Joint Infection10.1016/j.arth.2015.05.047 ↗
92. Is Single-stage Revision Safe Following Infected Total Knee Arthroplasty? A Critical Review
93. Masters, J.P., Smith, N.A., Foguet, P., Reed, M., Parsons, H., and Sprowson, A.P. (2013). A systematic review of the evidence for single stage and two stage revision of infected knee replacement. BMC Musculoskelet. Disord., 14.10.1186/1471-2474-14-222 ↗
94. Single Stage Knee Arthroplasty Revision Surgery: A Systematic Review of the Literature10.2174/1874325001509010504 ↗
95. Patient reported outcome measures after revision of the infected TKR: Comparison of single versus two-stage revision10.1007/s00167-012-2090-7 ↗
96. Kunutsor, S.K., Whitehouse, M.R., Lenguerrand, E., Blom, A.W., Beswick, A.D., and Team, I. (2016). Re-Infection Outcomes Following One- And Two-Stage Surgical Revision of Infected Knee Prosthesis: A Systematic Review and Meta-Analysis. PLoS ONE, 11.10.1371/journal.pone.0151537 ↗
97. Team Approach: The Management of Infection After Total Knee Replacement10.2106/JBJS.RVW.17.00058 ↗
98. The use of spacers (static and mobile) in infection knee arthroplasty10.1007/s12178-015-9293-8 ↗
99. Are Preformed Articulating Spacers Superior To Surgeon-Made Articulating Spacers in the Treatment Of PJI in THA? A Literature Review10.2174/1874325001509010255 ↗
100. Articulating Versus Static Spacers in Revision Total Knee Arthroplasty for Sepsis10.1097/00003086-200011000-00003 ↗