The Application of 29Si NMR Spectroscopy to the Analysis of Calcium Silicate-Based Cement using Biodentine™ as an Example
Source abstract
Abstract
Biodentine is one of the most successful and widely studied among the second generation of calcium silicate-based endodontic cements. Despite its popularity, the setting reactions of this cement system are not currently well understood. In particular, very little is known about the formation and structure of the major calcium silicate hydrate (C-S-H) gel phase, as it is difficult to obtain information on this poorly crystalline material by the traditional techniques of powder X-ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FTIR). In this study, the hydration reactions of Biodentine are monitored by XRD, FTIR, isothermal conduction calorimetry and, for the first time, 29Si magic angle spinning nuclear magnetic resonance spectroscopy (29Si MAS NMR) is used to investigate the structures of the anhydrous calcium silicate phases and the early C-S-H gel product. XRD analysis indicated that the anhydrous powder comprises 73.8 wt% triclinic tricalcium silicate, 4.45 wt% monoclinic β-dicalcium silicate, 16.6 wt% calcite and 5.15 wt% zirconium oxide. Calorimetry confirmed that the induction period for hydration is short, and that the setting reactions are rapid with a maximum heat evolution of 28.4 mW g−1 at 42 min. A progressive shift in the FTIR peak maximum from 905 to 995 cm−1 for the O-Si-O stretching vibrations accompanies the formation of the C-S-H gel during 1 week. The extent of hydration was determined by 29Si MAS NMR to be 87.0%, 88.8% and 93.7% at 6 h, 1 day and 1 week, respectively, which is significantly higher than that of MTA. The mean silicate chain length (MCL) of the C-S-H gel was also estimated by this technique to be 3.7 at 6 h and 1 day, and to have increased to 4.1 after 1 week. The rapid hydration kinetics of Biodentine, arising from the predominance of the tricalcium silicate phase, small particle size, and ‘filler effect’ of calcite and zirconium oxide, is a favorable characteristic of an endodontic cement, and the high values of MCL are thought to promote the durability of the cement matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Endodontics and Root Canal Treatments · Dental materials and restorations · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Lab of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China
Faculty of Engineering and Science, University of Greenwich, Chatham Maritime, Kent ME4 4TB, UK
References (67)
Show source-provided references
1. Calcium silicate-based cements: Composition, properties, and clinical applications10.1111/jicd.12195 ↗
2. Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview—Part I: vital pulp therapy10.1111/iej.12841 ↗
3. Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview—Part II: other clinical applications and complications10.1111/iej.12843 ↗
4. Calcium silicate bioactive cements: Biological perspectives and clinical applications10.1016/j.dental.2015.01.004 ↗
5. The hydration chemistry of ProRoot MTA10.4012/dmj.2014-309 ↗
6. The induction of heme oxygenase-1 modulates bismuth oxide-induced cytotoxicity in human dental pulp cells10.1016/j.joen.2007.07.012 ↗
7. Effect of bismuth oxide radioopacifier content on the material properties of an endodontic Portland cement-based (MTA-like) system10.1016/j.joen.2006.11.018 ↗
8. In vitro bioactivity and setting times of white Portland cement combined with different radio pacifying agents10.1051/matecconf/201710903003 ↗
9. Biodentine material characteristics and clinical applications: A 3 year literature review and update10.1007/s40368-018-0328-x ↗
10. Malkondu, Ö., Kazandağ, M.K., and Kazazoğlu, E. (2014). A review on Biodentine, a contemporary dentine replacement and repair material. BioMed. Res. Int.
11. Biodentine: From biochemical and bioactive properties to clinical applications10.1016/j.gien.2016.09.002 ↗
12. (2010). Active Biosilicate Technology™, Septodont. Biodentine Scientific file.
13. 1-year in vitro evaluation of tooth discoloration induced by 2 calcium silicate-based cements10.1016/j.joen.2016.06.012 ↗
14. Kahler, B., Chugal, N., and Lin, L.M. (2017). Alkaline materials and regenerative endodontics: A review. Materials, 10.10.3390/ma10121389 ↗
15. The impact of zirconium oxide radiopacifier on the early hydration behaviour of white Portland cement10.1016/j.msec.2012.09.009 ↗
16. Reinforcing effect of glass fiber-incorporated ProRoot MTA and Biodentine as intraorifice barriers10.1016/j.joen.2016.08.002 ↗
17. Effect of titanium tetrafluoride addition on the physicochemical and antibacterial properties of Biodentine as intraorfice barrier10.1016/j.dental.2018.11.019 ↗
18. Addition of zirconium oxide to Biodentine increases radiopacity and does not alter its physicochemical and biological properties10.1590/1678-7757-2018-0429 ↗
19. The physical properties and ion release of CPP-ACP-modified calcium silicate-based cements10.1111/adj.12255 ↗
20. Push-out bond strength of CPP-ACP-modified calcium silicate-based cements10.4012/dmj.2015-017 ↗
21. Enhanced bioactive properties of Biodentine modified with bioactive glass nanoparticles10.1590/1678-77572016-0209 ↗
22. Bioactivity and fluoride release of strontium and fluoride modified Biodentine10.1016/j.dental.2017.10.005 ↗
23. Multiscale understanding of tricalcium silicate hydration reactions10.1038/s41598-018-26943-y ↗
24. Bensted, J., and Barnes, P. (2002). Hydration of Portland cement. Structure and Performance of Cements, Spon Press. [2nd ed.].
25. Ouyang, X., Koleva, D.A., Ye, G., and van Breugel, K. (2017). Insights into the mechanisms of nucleation and growth of C-S-H on fillers. Mater. Struct., 50.10.1617/s11527-017-1082-y ↗
26. Hydration kinetics, ion-release and antimicrobial properties of white Portland cement blended with zirconium oxide nanoparticles10.4012/dmj.2014-174 ↗
27. D90: The strongest contributor to setting time in Mineral trioxide aggregate and Portland cement10.1016/j.joen.2015.02.033 ↗
28. Microstructure and chemical analysis of four calcium silicate-based cements in different environmental conditions10.1007/s00784-018-2394-1 ↗
29. Sequeira, D.B., Seabra, C.M., Palma, P.J., Cardoso, A.L., Peça, J., and Santos, J.M. (2018). Effects of a new bioceramic material on human apical papilla cells. J. Funct. Biomater., 9.10.3390/jfb9040074 ↗
30. Characterization of set Intermediate Restorative Material, Biodentine, Bioaggregate and a prototype calcium silicate cement for use as root-end filling materials10.1111/iej.12039 ↗
31. A novel sol-gel-derived calcium silicate cement with short setting time for application in endodontic repair of perforations10.2147/IJN.S150198 ↗
32. Calcium silicate and calcium hydroxide materials for pulp capping: Biointeractivity, porosity, solubility and bioactivity of current formulations
33. Influence of composition on setting kinetics of new injectable and/or fast setting tricalcium silicate cements10.1016/j.dental.2014.09.005 ↗
34. Nanoscale chemical surface characterization of four different types of dental pulp-capping materials10.1016/j.jdent.2016.12.009 ↗
35. FTIR characterization of the setting reaction of Biodentine10.1016/j.dental.2018.08.294 ↗
36. Crystalline phases involved in the hydration of calcium silicate based cements: Semi-quantitative Rietveld X-ray diffraction analysis10.1111/aej.12226 ↗
37. Overview about the use of Fourier transform infrared spectroscopy to study cementitious materials
38. Bensted, J., and Barnes, P. (2002). X-ray powder diffraction analysis of cements. Structure and Performance of Cements, Spon Press. [2nd ed.].
39. Stutzman, P.E., Feng, P., and Bullard, J.W. (2016). Phase analysis of Portland cements by combined quantitative X-ray powder diffraction and scanning electron microscopy. J. Res. Natl. Inst. Stan., 121.10.6028/jres.121.004 ↗
40. The impact of zirconium oxide nanoparticles on the hydration chemistry and biocompatibility of white Portland cement10.4012/dmj.2013-113 ↗
41. The impact of iodoform on the hydration, bioactivity and antimicrobial properties of white Portland cement10.1051/matecconf/201710904002 ↗
42. Bensted, J., and Barnes, P. (2002). Nuclear magnetic resonance spectroscopy and magnetic resonance imaging of cements and cement-based materials. Structure and Performance of Cements, Spon Press. [2nd ed.].
43. Characterisation of cement hydrate phases by TEM, NMR and Raman spectroscopy10.1680/adcr.2010.22.4.233 ↗
44. Wang, J., Han, B., Li, Z., Yu, X., and Dong, X. (2019). Effect investigation of nanofillers on C-S-H gel structure with Si NMR. J. Mater. Civ. Eng., 31.10.1061/(ASCE)MT.1943-5533.0002559 ↗
45. Composition and structure of C-S-H in white Portland cement-20% metakaolin pastes hydrated at 25 °C10.1016/j.cemconres.2006.11.012 ↗
46. Characterization of white Portland cement hydration and the C-S-H structure in the presence of sodium aluminate by 27Al and 29Si MAS NMR spectroscopy10.1016/j.cemconres.2003.10.009 ↗
47. Nuclear magnetic resonance - a powerful tool in cement and concrete research10.1680/adcr.1990.3.11.105 ↗
48. Modification of glass ionomer cement by incorporating hydroxyapatite-silica nano-powder composite: Sol-gel synthesis and characterization10.1016/j.ceramint.2013.09.127 ↗
49. Characterisation of a remineralising glass Carbomer® ionomer cement by MAS-NMR spectroscopy10.1016/j.dental.2012.06.011 ↗
50. Multispectroscopic investigation of silanised glass particles for dental fillers
51. The role of alumina in aluminoborosilicate glasses for use in glass-ionomer cements10.1039/b822285a ↗
52. The role of aluminium and silicon in the setting chemistry of glass ionomer cements10.1007/s10856-007-3251-y ↗
53. The role of Sr2+ on the structure and reactivity of SrO–CaO–ZnO–SiO2 ionomer glasses10.1007/s10856-006-0060-7 ↗
54. Structural and spatially resolved studies on the hardening of a commercial resin-modified glass-ionomer cement10.1007/s10856-006-0010-4 ↗
55. Characterisation of fluorine containing glasses by 19F, 27Al, 29Si and 31P MAS-NMR spectroscopy10.1016/j.jdent.2005.08.005 ↗
56. Early hydration of white Portland cement in the presence of bismuth oxide10.1179/1743676112Y.0000000058 ↗
57. A gel-derived mesoporous silica reference material for surface analysis by gas sorption. 1. Textural features10.1016/S0272-8842(99)00037-1 ↗
58. Investigation of the hydration and bioactivity of radiopacified tricalcium silicate cement, Biodentine and MTA Angelus10.1016/j.dental.2013.03.007 ↗
59. Chang, S.W. (2018). Chemical composition and porosity characteristics of various calcium silicate-based endodontic cements. Bioinorg. Chem. Appl.10.1155/2018/2784632 ↗
60. A fundamental parameters approach to X-ray line-profile fitting10.1107/S0021889891010804 ↗
61. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
62. Engelhardt, G., and Michel, D. (1987). High-Resolution Solid State NMR of Silicates and Zeolites, John Wiley & Sons.
63. 29Si MAS NMR studies of Portland cement component and effects of microsilica on the hydration reaction10.1016/0008-8846(88)90104-4 ↗
64. Pustovgar, E., Sangodkar, R.P., Andreev, A.S., Palacios, M., Chmelka, B.F., Flatt, R.J., and d’Espinose de Lacaillerie, J.-B. (2016). Understanding silicate hydration from quantitative analyses of hydrating tricalcium silicates. Nat. Commun., 7.10.1038/ncomms10952 ↗
65. Composition, silicate anion structure and morphology of calcium silicate hydrates (C-S-H) synthesised by silica-lime reaction and by controlled hydration of tricalcium silicate (C3S)10.1179/1743676115Y.0000000038 ↗
66. Auela, A., Dolado, J.S., Campillo, I., de Miguel, Y.R., Erkizia, E., Sánchez-Portal, D., Rubio, A., Porro, A., and Echenique, P.M. (2007). Silicate chain formation in the nanostructure of cement-based materials. J. Chem. Phys., 127.10.1063/1.2796171 ↗
67. Clinical Manipulation of Mineral Trioxide Aggregate: Lessons from the construction industry and their relevance to clinical practice