journal article·2020-12-22Open access

Varying the Polishing Protocol Influences the Color Stability and Surface Roughness of Bulk-Fill Resin-Based Composites

Filipa Freitas, Teresa Pinheiro de Melo, António HS Delgado, Paulo Monteiro, João Rua, Luís Proença, Jorge Caldeira, Ana Mano Azul, José João Mendes

Abstract

Surface properties of composites such as roughness and color impact periodontal health and aesthetic outcomes. Novel bulk-fill composites with improved functionality are being introduced and, in light of the existing variety of finishing/polishing procedures, research of their surface properties is warranted. Sixty discs were prepared from bulk-fill composites (Filtek™ Bulk Fill Posterior Restorative and Fill-Up™) and incremental-fill Filtek™ Z250. They were further divided according to different polishing procedures (n = 5): three multi-step polishing procedures or finishing with a bur (control). Surface roughness (Ra) was measured using an atomic force microscope (The AFM Workshop TT-AFM). A spectrophotometer (Spectroshade Micro Optic) was used to determine color stability, after exposure to a coffee solution. Data were analyzed using two-way MANOVA (significance level of 5%). Resin composite type, polishing procedure, and their interaction had a statistically significant effect on surface roughness (p < 0.001) and color change (p < 0.001). Fill-Up™ exhibited the highest surface roughness and greatest color change. Differences in color change were statistically significant (p < 0.001). Filtek™ Bulk Fill registered the lowest surface roughness and color change, after the three-step polishing procedure. Both parameters were significantly correlated (ρ = 0.754, p < 0.001) and found to be material dependent and polishing-procedure dependent. Higher surface roughness relates to greater color changes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Orthodontics and Dentofacial Orthopedics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Clinical Research Unit (CRU), Centro de Investigação Interdisciplinar Egas Moniz (CiiEM), Instituto Universitário Egas Moniz (IUEM), 2829-511 Almada, Portugal

Department of Biomaterials and Tissue Engineering, Royal Free Hospital, UCL Eastman Dental Institute, London NW3 NPF, UK

Quantitative Methods for Health Research (MQIS), CiiEM, Instituto Universitário Egas Moniz (IUEM), 2829-511 Almada, Portugal

UCIBIO and LAQV Requimte, Faculdade de Ciências e Tecnologias, Universidade Nova de Lisboa, 2829-516 Almada, Portugal

References (45)

Show source-provided references
1. Degree of conversion and surface hardness of bulk-fill composite versus incremental-fill composite10.1016/j.tdj.2015.01.003 ↗
2. Composite resins and bonded porcelain: The postamalgam era?
3. Color stability of different composite resin materials10.1016/S0022-3913(13)60323-6 ↗
4. Does finishing and polishing of Restorative materials affect bacterial adhesion and biofilm formation? A systematic review10.2341/17-073-L ↗
5. Petersen, R.C., Liu, P.-R., and Reddy, M.S. (2020). An Advanced Fiber-Reinforced Composite Solution for Gingival Inflammation and Bone Loss Related to Restorative Crowns. EC Dent. Sci., 19.
6. Microbial changes in biofilms on composite resins with different surface roughness: An in vitro study with a multispecies biofilm model10.1016/j.prosdent.2019.08.009 ↗
7. Nine prophylactic polishing pastes: Impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite10.1007/s00784-018-2440-z ↗
8. Evaluation of the effects of polishing systems on surface roughness and morphology of dental composite resin10.1038/s41415-020-1370-8 ↗
9. Long-Term Effect of Surface Roughness and Patients’ Factors on Crestal Bone Loss at Dental Implants. A Systematic Review and Meta-Analysis10.1111/cid.12457 ↗
10. Isola, G., Polizzi, A., Alibrandi, A., Williams, R.C., and Leonardi, R. (2020). Independent impact of periodontitis and cardiovascular disease on elevated soluble urokinase-type plasminogen activator receptor (suPAR) levels. J. Periodontol.10.1002/JPER.20-0242 ↗
11. Abrasive Finishing and Polishing in Restorative Dentistry: A State-of-the-Art Review10.1016/j.cden.2006.12.002 ↗
12. Color stability of resin matrix restorative materials as a function of the method of light activation10.1111/j.1600-0722.2004.00125.x ↗
13. Color Stability of a Dental Composite after Immersion in Various Media10.4012/dmj.24.382 ↗
14. Surface roughness and hardness of a composite resin:Influence of finishing and polishing and immersion methods10.1590/S1516-14392010000300021 ↗
15. Shrinkage stresses generated during resin-composite applications: A review10.4061/2010/131630 ↗
16. A randomized controlled three year evaluation of bulk-filled posterior resin restorations based on stress decreasing resin technology10.1016/j.dental.2014.05.028 ↗
17. Color stability, opacity and degree of conversion of pre-heated composites10.1016/j.jdent.2010.12.001 ↗
18. Bulk-filled posterior resin restorations based on stress-decreasing resin technology: A randomized, controlled 6-year evaluation10.1111/eos.12351 ↗
19. Polymerization Shrinkage and Depth of Cure of Bulk-Fill Resin Composites and Highly Filled Flowable Resin10.2341/13-307-L ↗
20. Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals10.1016/j.dental.2013.05.011 ↗
21. A comparative study of bulk-fill composites: Degree of conversion, post-gel shrinkage and cytotoxicity
22. Effect of resin thickness on the microhardness and optical properties of bulk-fill resin composites10.5395/rde.2015.40.2.128 ↗
23. Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material10.1016/j.prosdent.2013.12.007 ↗
24. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites10.1016/j.jdent.2012.07.005 ↗
25. Effects of sports drinks on color stability of nanofilled and microhybrid composites after long-term immersion10.1016/j.jdent.2012.06.002 ↗
26. The Evaluation of Color and Surface Roughness Changes in Resin based Restorative Materials with Different Contents After Waiting in Various Liquids: An SEM and AFM study10.1002/jemt.23104 ↗
27. The effect of polishing protocol on surface gloss of different restorative resin composites
28. Surface Roughness of Novel Resin Composites Polished with One-step Systems10.2341/06-56 ↗
29. Surface roughness and morphology of resin composites polished with two-step polishing systems10.4012/dmj.2013-287 ↗
30. Influence of Polishing System on the Surface Roughness of Flowable and Regular-Viscosity Bulk Fill Composites10.11607/prd.3033 ↗
31. Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins10.1016/S0109-5641(02)00014-3 ↗
32. Shining a light on high volume photocurable materials10.1016/j.dental.2018.02.009 ↗
33. Bulk-fill Resin-based Composites: An In Vitro Assessment of Their Mechanical Performance10.2341/12-395-L ↗
34. Influence of polishing systems on surface roughness of composite resins: Polishability of composite resins10.2341/17-140-L ↗
35. Effects of Different Polishing Protocols and Curing Time on Surface Properties of a Bulk-fill Composite Resin
36. Babina, K., Polyakova, M., Sokhova, I., Doroshina, V., Arakelyan, M., and Novozhilova, N. (2020). The effect of finishing and polishing sequences on the surface roughness of three different nanocomposites and composite/enamel and composite/cementum interfaces. Nanomaterials, 10.10.3390/nano10071339 ↗
37. The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials
38. Roughness Analysis on Composite Materials (Microfilled, Nanofilled and Silorane) After Different Finishing and Polishing Procedures10.2174/1874210601509010357 ↗
39. The effect of different finishing and polishing techniques on surface roughness and gloss of two nanocomposites10.1016/j.sdentj.2018.04.003 ↗
40. Effects of single species versus multispecies periodontal biofilms on the antibacterial efficacy of a novel bioactive Class-V nanocomposite10.1016/j.dental.2019.02.030 ↗
41. Clinical evaluation of combined surgical/ restorative treatment of gingival recession-type defects using different restorative materials: A randomized clinical trial10.1016/j.jds.2017.09.004 ↗
42. Effects of polishing procedures on color stability of composite resins10.1590/S1678-77572009000200007 ↗
43. Color stability and surface roughness of polished anterior restorative materials10.4012/dmj.2014-344 ↗
44. Effect of one-step polishing system on the color stability of nanocomposites10.1016/j.jdent.2012.10.008 ↗
45. Changes in surface characteristics of dental resin composites after polishing10.1007/s10856-005-0634-9 ↗