journal article·2020-02-22Open access

Printing 3D Hydrogel Structures Employing Low-Cost Stereolithography Technology

Leila Samara S. M. Magalhães, Francisco Eroni Paz Santos, Conceição de Maria Vaz Elias, Samson Afewerki, Gustavo F. Sousa, Andre S. A. Furtado, Fernanda Roberta Marciano, Anderson Oliveira Lobo

Abstract

Stereolithography technology associated with the employment of photocrosslinkable, biocompatible, and bioactive hydrogels have been widely used. This method enables 3D microfabrication from images created by computer programs and allows researchers to design various complex models for tissue engineering applications. This study presents a simple and fast home-made stereolithography system developed to print layer-by-layer structures. Polyethylene glycol diacrylate (PEGDA) and gelatin methacryloyl (GelMA) hydrogels were employed as the photocrosslinkable polymers in various concentrations. Three-dimensional (3D) constructions were obtained by using the stereolithography technique assembled from a commercial projector, which emphasizes the low cost and efficiency of the technique. Lithium phenyl-2,4,6-trimethylbenzoyl phosphonate (LAP) was used as a photoinitiator, and a 404 nm laser source was used to promote the crosslinking. Three-dimensional and vascularized structures with more than 5 layers and resolutions between 42 and 83 µm were printed. The 3D printed complex structures highlight the potential of this low-cost stereolithography technique as a great tool in tissue engineering studies, as an alternative to bioprint miniaturized models, simulate vital and pathological functions, and even for analyzing the actions of drugs in the human body.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Anatomy and Medical Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

LIMAV–Interdisciplinary Laboratory for Advanced Materials, BioMatLab, Materials Science and Engineering Graduate Program, UFPI–Federal University of Piauí, Teresina 64049-550, Brazil

Department of Physics, UFPI–Federal University of Piauí, Teresina 64049-550, Brazil

Biomedical Engineering Graduate Program, University of Brazil, São Paulo 08230-030, Brazil

Division of Engineering in Medicine, Department of Medicine, Harvard Medical School, Brigham & Women´s Hospital, Cambridge, MA 02139, USA

Harvard-MIT Division of Health Science and Technology, Massachusetts Institute of Technology, MIT, Cambridge, MA 02139, USA

References (30)

Show source-provided references
1. Murphy, S.V., De Coppi, P., and Atala, A. (2019). Opportunities and challenges of translational 3D bioprinting. Nat. Biomed. Eng.10.1038/s41551-019-0471-7 ↗
2. Bioprinting a Synthetic Smectic Clay for Orthopedic Applications10.1002/adhm.201900158 ↗
3. Recent advances in 3D printing of biomaterials10.1186/s13036-015-0001-4 ↗
4. Visible Light Photoinitiation of Cell-Adhesive Gelatin Methacryloyl Hydrogels for Stereolithography 3D Bioprinting10.1021/acsami.8b06607 ↗
5. Novel photo-curable polyurethane resin for stereolithography10.1039/C6RA05045J ↗
6. Digital micromirror device projection printing system for meniscus tissue engineering10.1016/j.actbio.2013.03.020 ↗
7. 3D printing of biomimetic microstructures for cancer cell migration10.1007/s10544-013-9812-6 ↗
8. Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture10.1016/j.biomaterials.2012.09.048 ↗
9. Micro and nanotechnologies in heart valve tissue engineering10.1016/j.biomaterials.2016.07.001 ↗
10. Zhang, Y.S., and Khademhosseini, A. (2017). Advances in engineering hydrogels. Science, 356.10.1126/science.aaf3627 ↗
11. Spatially and temporally controlled hydrogels for tissue engineering10.1016/j.mser.2017.07.001 ↗
12. A review on stereolithography and its applications in biomedical engineering10.1016/j.biomaterials.2010.04.050 ↗
13. Stereolithography in tissue engineering10.1007/s10856-013-5107-y ↗
14. Fabrication of arbitrary 3D components in cardiac surgery: From macro-, micro-to nanoscale10.1088/1758-5090/aa8113 ↗
15. A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks10.1088/1758-5090/7/4/045009 ↗
16. Recent advances in photo-crosslinkable hydrogels for biomedical applications10.2144/btn-2018-0083 ↗
17. Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs10.1016/j.mtbio.2019.100008 ↗
18. Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing10.1016/j.dental.2017.01.018 ↗
19. Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting10.1002/adma.201800242 ↗
20. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography10.1016/j.biomaterials.2012.01.048 ↗
21. A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds
22. Biomaterials and Tissue Engineering Bulletin
23. Rapid prototyping technologies and their applications in prosthodontics, a review of literature
24. De Paula, M.M.M., Bassous, N.J., Afewerki, S., Harb, S.V., Ghannadian, P., Marciano, F.R., Viana, B.C., Tim, C.R., Webster, T.J., and Lobo, A.O. (2018). Understanding the impact of crosslinked PCL/PEG/GelMA electrospun nanofibers on bactericidal activity. PLoS ONE, 13.10.1101/322321 ↗
25. Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA10.1007/s10529-015-1921-2 ↗
26. Gelatin-polysaccharide composite scaffolds for 3D cell culture and tissue engineering: Towards natural therapeutics10.1002/btm2.10124 ↗
27. Microfluidic bioprinting of heterogeneous 3D tissue constructs using low-viscosity bioink10.1002/adma.201503310 ↗
28. Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels10.1088/1758-5082/6/2/024105 ↗
29. Microfluidics for advanced drug delivery systems10.1016/j.coche.2014.12.001 ↗
30. 3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs10.1088/1758-5090/8/2/025019 ↗