Fabrication and Characterization of Nanoporous Niobia, and Nanotubular Tantala, Titania and Zirconia via Anodization
Source abstract
Abstract
Valve metals such as titanium (Ti), zirconium (Zr), niobium (Nb) and tantalum (Ta) that confer a stable oxide layer on their surfaces are commonly used as implant materials or alloying elements for titanium-based implants, due to their exceptional high corrosion resistance and excellent biocompatibility. The aim of this study was to investigate the bioactivity of the nanostructures of tantala (Ta2O5), niobia (Nb2O5), zirconia (ZrO2) and titania (TiO2) in accordance to their roughness and wettability. Therefore, four kinds of metal oxide nanoporous and nanotubular Ta2O5, Nb2O5, ZrO2 and TiO2 were fabricated via anodization. The nanosize distribution, morphology and the physical and chemical properties of the nanolayers and their surface energies and bioactivities were investigated using SEM-EDS, X-ray diffraction (XRD) analysis and 3D profilometer. It was found that the nanoporous Ta2O5 exhibited an irregular porous structure, high roughness and high surface energy as compared to bare tantalum metal; and exhibited the most superior bioactivity after annealing among the four kinds of nanoporous structures. The nanoporous Nb2O5 showed a uniform porous structure and low roughness, but no bioactivity before annealing. Overall, the nanoporous and nanotubular layers of Ta2O5, Nb2O5, ZrO2 and TiO2 demonstrated promising potential for enhanced bioactivity to improve their biomedical application alone or to improve the usage in other biocompatible metal implants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia
Department of Materials Science and Engineering, Stony Brook University, Stony Brook, New York, NY 11794, USA
School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Bundoora, Victoria 3083, Australia
Funding
Department of Industry, Innovation, Science, Research and Tertiary Education (DIISRTE), Australia, through the Australia - India Strategic Research Fund
References (57)
Show source-provided references
1. Multiple layer protective coating composed of Ta2O5, Cr2O3 and Al2O3 produced by the MO-CVD technique10.3323/jcorr1974.38.11_579 ↗
2. Corrigendum to “Multifunctional hybrid coating on titanium towards hydroxyapatite growth: Electrodeposition of tantalum and its molecular functionalization with organophosphonic acids films”10.1016/j.electacta.2008.09.016 ↗
3. Multifunctional hybrid coating on titanium towards hydroxyapatite growth: Electrodeposition of tantalum and its molecular functionalization with organophosphonic acids films10.1016/j.electacta.2008.03.003 ↗
4. Titanium modified with layer-by-layer sol-gel tantalum oxide and an organodiphosphonic acid: A coating for hydroxyapatite growth10.1016/j.jcis.2009.03.092 ↗
5. Enhancement of the dielectric-constant of Ta2O5 through substitution with TiO210.1038/377215a0 ↗
6. Experimental and clinical performance of porous tantalum in orthopedic surgery10.1016/j.biomaterials.2006.04.041 ↗
7. Self-assembled porous tantalum oxide prepared in H2SO4/HF electrolytes10.1149/1.1859676 ↗
8. Initiation of tantalum oxide pores grown on tantalum by potentiodynamic anodic oxidation10.1007/s10832-006-4351-7 ↗
9. Porous tantalum oxide prepared by electrochemical anodic oxidation10.1149/1.1997153 ↗
10. Thick self-ordered nanoporous Ta2O5 films with long-range lateral order10.1149/1.3116243 ↗
11. High aspect ratio ordered nanoporous Ta2O5 films by anodization of Ta10.1016/j.elecom.2008.01.004 ↗
12. Optical waveguide characteristics of reactive DC-sputtered niobium pentoxide films10.1063/1.88304 ↗
13. Biocompatible Nb2O5 thin films prepared by means of the sol-gel process10.1023/B:JMSM.0000021120.86985.f7 ↗
14. Nucleation and growth of the nanostructured anodic oxides on tantalum and niobium under the porous alumina film10.1016/S0013-4686(03)00345-1 ↗
15. Formation of self-organized niobium porous oxide on niobium10.1016/j.elecom.2004.11.012 ↗
16. Nanoporous anodic niobium oxide formed in phosphate/glycerol electrolyte10.1149/1.1883865 ↗
17. Investigation, for NH3 gas sensing applications, of the Nb2O5 semiconducting oxide in the presence of interferent species such as oxygen and humidity10.1016/S0925-4005(97)00281-5 ↗
18. Various reactions catalyzed by niobium compounds and materials10.1016/0926-860X(95)00205-7 ↗
19. Synthesis of multicolor Nb2O5 coatings for electrochromic devices10.1016/S0040-6090(96)09583-1 ↗
20. Porous niobium oxide films prepared by anodization in HF/H3PO410.1016/j.electacta.2006.02.024 ↗
21. Choi, J., Lim, J.H., Lee, J., and Kim, K.J. (2007). Porous niobium oxide films prepared by anodization–annealing–anodization. Nanotechnology, 18.10.1088/0957-4484/18/5/055603 ↗
22. Application of ZrO2 as a catalyst and a catalyst support10.1016/0920-5861(94)80003-0 ↗
23. Metal oxide catalysts for lean NOx reduction10.1016/0920-5861(95)00135-3 ↗
24. Bright visible luminescence of self-organized ZrO2 nanotubes10.1007/s10008-008-0748-3 ↗
25. Thick self-organized porous zirconium oxide formed in H2SO4/NH4F electrolytes10.1016/j.elecom.2004.09.003 ↗
26. Fabrication and characterization of smooth high aspect ratio zirconia nanotubes10.1016/j.cplett.2005.05.065 ↗
27. Formation of self-organized zirconia nanostructure10.1149/1.2215519 ↗
28. Enhanced self-ordering of anodic ZrO2 nanotubes in inorganic and organic electrolytes using two-step anodization10.1002/pssr.200802019 ↗
29. Formation of hexagonally ordered nanoporous anodic zirconia10.1016/j.elecom.2008.10.002 ↗
30. Shin, Y., and Lee, S. (2009). A freestanding membrane of highly ordered anodic ZrO2 nanotube arrays. Nanotechnology, 20.10.1088/0957-4484/20/10/105301 ↗
31. Novel bioactive materials with different mechanical properties10.1016/S0142-9612(03)00044-9 ↗
32. Mechanism of apatite formation on bioactive tantalum metal in simulated body fluid10.4028/www.scientific.net/KEM.240-242.11 ↗
33. Synthesis and electrochemical characterization of porous niobium oxide coated 316l ss for orthopedic applications10.1016/j.matchemphys.2009.10.033 ↗
34. Apatite formation on nano-structured titanium and niobium surface10.4028/www.scientific.net/MSF.614.85 ↗
35. Porous tantalum coatings prepared by vacuum plasma spraying enhance bmscs osteogenic differentiation and bone regeneration in vitro and in vivo10.1371/journal.pone.0066263 ↗
36. Bonelike apatite formation on niobium metal treated in aqueous NaOH10.1023/B:JMSM.0000046388.07961.81 ↗
37. Bioactivity of zirconia nanotube arrays fabricated by electrochemical anodization10.1016/j.msec.2008.10.003 ↗
38. Structure and bioactivity of zirconia nanotube arrays fabricated by anodization10.1111/j.1744-7402.2008.02305.x ↗
39. Enhancement of the capability of hydroxyapatite formation on Zr with anodic ZrO2 nanotubular arrays via an effective dipping pretreatment10.1002/jbm.b.31898 ↗
40. Surface modification of zirconium by anodisation as material for permanent implants: In vitro and in vivo study10.1007/s10856-012-4770-8 ↗
41. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces10.1016/j.actbio.2012.04.005 ↗
42. TiO2 nanotubes: Self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
43. Shackelford, J.F., and Alexander, W. (2000). CRC Materials Science and Engineering Handbook, CRC Press. [3rd ed.].10.1201/9781420038408 ↗
44. Shackelford, J.F., and Alexander, W. (2000). CRC Materials Science and Engineering Handbook, CRC Press. [3rd ed.].10.1201/9781420038408 ↗
45. Fabrication and characterization of TiO2-ZrO2-ZrTiO4 nanotubes on TiZr alloy manufactured via anodization10.1039/C3TB21204A ↗
46. Mechanistic aspects of the self-organization process for oxide nanotube formation on valve metals10.1149/1.2749091 ↗
47. (2005). Guidance on the Measurement of Wettability of Insulator Surfaces, SAI Global.
48. Apatite formation on surfaces of ceramics, metals and polymers in body environment10.1016/S1359-6454(98)80036-0 ↗
49. The mechanism of biomineralization of bone-like apatite on synthetic hydroxyapatite: An in vitro assessment10.1098/rsif.2004.0003 ↗
50. Enhancement of the bioactivity of titanium oxide nanotubes by precalcification10.1016/j.matlet.2008.01.121 ↗
51. Time-dependent growth of biomimetic apatite on anodic TiO2 nanotubes10.1016/j.electacta.2008.01.027 ↗
52. Hubbard, A.T. (2001). Chemical Properties of Material Surfaces, CRC Press.
53. Hubbard, A.T. (2001). Chemical Properties of Material Surfaces, CRC Press.
54. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
55. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
56. Forces involved in the adhesive process. I. Critical surface tensions of polymeric solids as determined with polar liquids10.1016/0021-9797(70)90054-8 ↗
57. Formation and growth of clusters in conventional and new kinds of simulated body fluids10.1002/jbm.a.10426 ↗