journal article·2025-09-04Open access

Advancing Scaffold Architecture for Bone Tissue Engineering: A Comparative Study of 3D-Printed β-TCP Constructs in Dynamic Culture with pBMSC

Yannick M. Sillmann, Ana M. P. Baggio, Pascal Eber, Benjamin R. Freedman, Cynthia Liu, Youssef Jounaidi, Alexander Schramm, Frank Wilde, Fernando P. S. Guastaldi

Abstract

Scaffold architecture is a key determinant of cell behavior and tissue regeneration in bone tissue engineering, yet the influence of pore size under dynamic culture conditions remains incompletely understood. This study aimed to evaluate the effects of scaffold pore size on osteogenic differentiation of porcine bone marrow-derived mesenchymal stem cells (pBMSCs) cultured in a rotational oxygen-permeable bioreactor system (ROBS). Three-dimensionally (3D) printed beta-tricalcium phosphate (β-TCP) scaffolds with pore sizes of 500 µm and 1000 µm were seeded with pBMSC and cultured for 7 and 14 days under dynamic perfusion conditions. Gene expression analysis revealed significantly higher levels of osteogenic markers (Runx2, BMP-2, ALP, Osx, Col1A1) in the 1000 µm group, particularly at the early time point, with the later-stage marker Osteocalcin (Ocl) rising faster and higher in the 1000 µm group, after a lower expression at 7 days. ALP activity assays corroborated these findings. Despite having lower mechanical strength, the 1000 µm scaffolds supported a homogeneous cell distribution and high viability across all regions. These results suggest that larger pore sizes enhance early osteogenic commitment by improving nutrient transport and fluid flow in dynamic culture. These findings also support the use of larger-pore scaffolds in bioreactor-based preconditioning strategies and underscore the clinical importance of promoting early osteogenic differentiation to reduce in vitro culture time, an essential consideration for the timely preparation of implantable grafts in bone tissue engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Oral and Maxillofacial Surgery, Department of Surgery, Massachusetts General Hospital, Boston, MA 02114, USA

Harvard School of Dental Medicine, Boston, MA 02115, USA

Department of Oral and Plastic Maxillofacial Surgery, University Hospital Ulm, 89081 Ulm, Germany

John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02134, USA

Wyss Institute for Biologically Inspired Engineering at Harvard University, Boston, MA 02215, USA

Department of Anesthesia, Critical Care and Pain Medicine, Massachusetts General Hospital, Harvard Medical School, Boston, MA 02114, USA

Department of Oral and Plastic Maxillofacial Surgery, Military Hospital Ulm (Academic Hospital of the University of Ulm), 89081 Ulm, Germany

Funding

Massachusetts General Hospital, Department of Oral and Maxillofacial Surgery Education Research Fund · Biomedical Education Program (BMEP), DAAD

References (94)

Show source-provided references
1. Marginal or Segmental Mandibulectomy: Treatment Modality Selection for Oral Cancer: A Systematic Review and Meta-Analysis10.1016/j.ijom.2017.07.019 ↗
2. Mandibular Reconstruction in Head and Neck Cancer: Which Is the Gold Standard?10.1007/s00405-023-08050-5 ↗
3. Cranial Bone Defects: Current and Future Strategies10.3171/2010.9.FOCUS10201 ↗
4. Restoration of Facial Bone Defect Using Patient-Specific Implant10.1097/SCS.0000000000008551 ↗
5. Increased Osteogenic Activity of Dynamic Cultured Composite Bone Scaffolds: Characterization and In Vitro Study10.1016/j.joms.2021.10.011 ↗
6. Risk Factors for Post-Operative Complications after Procedures for Autologous Bone Augmentation from Different Donor Sites10.1016/j.jcms.2017.11.016 ↗
7. Autogenous Bone Grafts in Oral Implantology—Is It Still a “Gold Standard”? A Consecutive Review of 279 Patients with 456 Clinical Procedures10.1186/s40729-017-0084-4 ↗
8. Reconstruction of Mandibular Defects with Autologous Tissue-Engineered Bone10.1016/j.joms.2003.11.010 ↗
9. Baggio, A.M.P., Sillmann, Y.M., Eber, P., Michallek, F.R.S., Monteiro, J.L.G.C., Bassi, A.P.F., and Guastaldi, F.P.S. (2025). How Does Ceramic-Based Scaffold Microarchitecture Impact Maxillofacial Bone Regeneration? A Systematic Review of Large Animal Models. Appl. Sci., 15.10.3390/app15126899 ↗
10. Sillmann, Y.M., Eber, P., Orbeta, E., Wilde, F., Gross, A.J., and Guastaldi, F.P.S. (2025). Milestones in Mandibular Bone Tissue Engineering: A Systematic Review of Large Animal Models and Critical-Sized Defects. J. Clin. Med., 14.10.3390/jcm14082717 ↗
11. Recent Update on Craniofacial Tissue Engineering10.1177/20417314211003735 ↗
12. Animal Models for Bone Tissue Engineering and Modelling Disease10.1242/dmm.033084 ↗
13. Deng, Y., Jiang, C., Li, C., Li, T., Peng, M., Wang, J., and Dai, K. (2017). 3D Printed Scaffolds of Calcium Silicate-Doped β-TCP Synergize with Co-Cultured Endothelial and Stromal Cells to Promote Vascularization and Bone Formation. Sci. Rep., 7.10.1038/s41598-017-05196-1 ↗
14. Bouyer, M., Garot, C., Machillot, P., Vollaire, J., Fitzpatrick, V., Morand, S., Boutonnat, J., Josserand, V., Bettega, G., and Picart, C. (2021). 3D-Printed Scaffold Combined to 2D Osteoinductive Coatings to Repair a Critical-Size Mandibular Bone Defect. Mater. Today Bio, 11.10.1016/j.mtbio.2021.100113 ↗
15. The Impact of 3D Printing on Oral and Maxillofacial Surgery10.2217/3dp-2022-0025 ↗
16. Matheus, H.R., Hadad, H., and Guastaldi, F.P.S. (2024). The State of 3D Printing of Bioengineered Customized Maxillofacial Bone Scaffolds: A Narrative Review. Front. Oral Maxillofac. Med., 6.10.21037/fomm-22-11 ↗
17. Applications of 3D Printing on Craniofacial Bone Repair: A Systematic Review10.1016/j.jdent.2018.11.004 ↗
18. Bone Tissue Engineering Scaffolds with HUVECs/hBMSCs Cocultured on 3D-Printed Composite Bioactive Ceramic Scaffolds Promoted Osteogenesis/Angiogenesis
19. Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size10.1089/ten.teb.2012.0437 ↗
20. Bone Tissue Engineering Scaffolds: Function of Multi-Material Hierarchically Structured Scaffolds10.1002/adhm.202202766 ↗
21. Lattice Microarchitecture for Bone Tissue Engineering from Calcium Phosphate Compared to Titanium10.1089/ten.tea.2018.0014 ↗
22. Correlation between Properties and Microstructure of Laser Sintered Porous β-Tricalcium Phosphate Bone Scaffolds10.1088/1468-6996/14/5/055002 ↗
23. Zhang, J., Wehrle, E., Rubert, M., and Müller, R. (2021). 3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors. Int. J. Mol. Sci., 22.10.3390/ijms22083971 ↗
24. Advances in In Vitro and In Vivo Bioreactor-Based Bone Generation for Craniofacial Tissue Engineering10.34133/bmef.0004 ↗
25. Design, Fabrication, and Characterization of a Multimodal Reconfigurable Bioreactor for Bone Tissue Engineering10.1002/bit.28100 ↗
26. Yamada, S., Yassin, M.A., Schwarz, T., Mustafa, K., and Hansmann, J. (2022). Optimization and Validation of a Custom-Designed Perfusion Bioreactor for Bone Tissue Engineering: Flow Assessment and Optimal Culture Environmental Conditions. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.811942 ↗
27. Characterization of Three-dimensional Bone-like Tissue Growth and Organization under Influence of Directional Fluid Flow10.1002/bit.28418 ↗
28. Baino, F., Novajra, G., and Vitale-Brovarone, C. (2015). Bioceramics and Scaffolds: A Winning Combination for Tissue Engineering. Front. Bioeng. Biotechnol., 3.10.3389/fbioe.2015.00202 ↗
29. Personalized Bioceramic Grafts for Craniomaxillofacial Bone Regeneration10.1038/s41368-024-00327-7 ↗
30. Compressive Strength of β-TCP Scaffolds Fabricated via Lithography-Based Manufacturing for Bone Tissue Engineering10.1016/j.ceramint.2022.02.085 ↗
31. Design and 3D Bioprinting of Interconnected Porous Scaffolds for Bone Regeneration. An Additive Manufacturing Approach10.1016/j.jmapro.2021.01.057 ↗
32. Dose-Dependent Effects of Zoledronic Acid on the Osteogenic Differentiation of Human Bone Marrow Stem Cells (hBMSCs)10.1016/j.jormas.2023.101479 ↗
33. In Vitro Engineering of Bone Using a Rotational Oxygen-Permeable Bioreactor System10.1016/S0928-4931(02)00006-1 ↗
34. Tissue-Engineered Bone With 3-Dimensionally Printed β-Tricalcium Phosphate and Polycaprolactone Scaffolds and Early Implantation: An In Vivo Pilot Study in a Porcine Mandible Model10.1016/j.joms.2015.01.021 ↗
35. In Vitro Induction of Alkaline Phosphatase Levels Predicts in Vivo Bone Forming Capacity of Human Bone Marrow Stromal Cells10.1016/j.scr.2013.12.001 ↗
36. Yang, D.-C., Yang, M.-H., Tsai, C.-C., Huang, T.-F., Chen, Y.-H., and Hung, S.-C. (2011). Hypoxia Inhibits Osteogenesis in Human Mesenchymal Stem Cells through Direct Regulation of RUNX2 by TWIST. PLoS ONE, 6.10.1371/journal.pone.0023965 ↗
37. BMP Signaling Is Required for RUNX2-Dependent Induction of the Osteoblast Phenotype10.1359/jbmr.060109 ↗
38. Mitogen-Activated Protein Kinase (MAPK)-Regulated Interactions between Osterix and Runx2 Are Critical for the Transcriptional Osteogenic Program10.1074/jbc.M114.576793 ↗
39. Kim, J., and Adachi, T. (2019). Cell Condensation Triggers the Differentiation of Osteoblast Precursor Cells to Osteocyte-Like Cells. Front. Bioeng. Biotechnol., 7.10.3389/fbioe.2019.00288 ↗
40. Multiple Functions of Osterix Are Required for Bone Growth and Homeostasis in Postnatal Mice10.1073/pnas.0912855107 ↗
41. Runx2: Structure, Function, and Phosphorylation in Osteoblast Differentiation10.1016/j.ijbiomac.2015.04.008 ↗
42. Establishing a Deeper Understanding of the Osteogenic Differentiation of Monolayer Cultured Human Pluripotent Stem Cells Using Novel and Detailed Analyses10.1186/s13287-020-02085-9 ↗
43. Osteogenic Differentiation of Mesenchymal Stromal Cells in Two-Dimensional and Three-Dimensional Cultures without Animal Serum10.1186/s13287-015-0162-6 ↗
44. Huang, W. (2007). Signaling and Transcriptional Regulation in Osteoblast Commitment and Differentiation. Front. Biosci., 12.10.2741/2296 ↗
45. Osterix Induces Col1a1 Gene Expression through Binding to Sp1 Sites in the Bone Enhancer and Proximal Promoter Regions10.1016/j.bone.2012.11.007 ↗
46. Bioreactor Culture Duration of Engineered Constructs Influences Bone Formation by Mesenchymal Stem Cells10.1016/j.biomaterials.2017.08.044 ↗
47. A Perfusion Bioreactor System Efficiently Generates Cell-loaded Bone Substitute Materials for Addressing Critical Size Bone Defects10.1002/biot.201400813 ↗
48. Analysis of Gene Expression Signatures for Osteogenic 3D Perfusion-Bioreactor Cell Cultures Based on a Multifactorial DoE Approach10.3390/pr2030639 ↗
49. Tsao, Y.-T., Huang, Y.-J., Wu, H.-H., Liu, Y.-A., Liu, Y.-S., and Lee, O. (2017). Osteocalcin Mediates Biomineralization during Osteogenic Maturation in Human Mesenchymal Stromal Cells. Int. J. Mol. Sci., 18.10.3390/ijms18010159 ↗
50. Temporal Profiling and Pulsed SILAC Labeling Identify Novel Secreted Proteins During Ex Vivo Osteoblast Differentiation of Human Stromal Stem Cells10.1074/mcp.M111.012138 ↗
51. Biology of Bone Formation, Fracture Healing, and Distraction Osteogenesis10.1097/SCS.0000000000003625 ↗
52. Scaffolds in Tissue Engineering Bone and Cartilage10.1016/S0142-9612(00)00121-6 ↗
53. Sun, J., Chen, C., Zhang, B., Yao, C., and Zhang, Y. (2025). Advances in 3D-Printed Scaffold Technologies for Bone Defect Repair: Materials, Biomechanics, and Clinical Prospects. BioMed. Eng. OnLine, 24.10.1186/s12938-025-01381-w ↗
54. Coburn, B., and Salary, R.R. (2025). Mechanical Characterization of Porous Bone-like Scaffolds with Complex Microstructures for Bone Regeneration. Bioengineering, 12.10.3390/bioengineering12040416 ↗
55. Toosi, S., Javid-Naderi, M.J., Tamayol, A., Ebrahimzadeh, M.H., Yaghoubian, S., and Mousavi Shaegh, S.A. (2024). Additively Manufactured Porous Scaffolds by Design for Treatment of Bone Defects. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1252636 ↗
56. Wang, M., Xu, Y., Cao, L., Xiong, L., Shang, D., Cong, Y., Zhao, D., Wei, X., Li, J., and Fu, D. (2025). Mechanical and Biological Properties of 3D Printed Bone Tissue Engineering Scaffolds. Front. Bioeng. Biotechnol., 13.10.3389/fbioe.2025.1545693 ↗
57. Bone Mechanical Properties in Healthy and Diseased States10.1146/annurev-bioeng-062117-121139 ↗
58. Mechanical Basis of Bone Strength: Influence of Bone Material, Bone Structure and Muscle Action
59. Review on the Strategies to Improve the Mechanical Strength of Highly Porous Bone Bioceramic Scaffolds10.1016/j.jeurceramsoc.2023.09.003 ↗
60. Biomechanics and Mechanobiology of the Bone Matrix10.1038/s41413-022-00223-y ↗
61. Porosity of 3D Biomaterial Scaffolds and Osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
62. Yang, Y., Wang, G., Liang, H., Gao, C., Peng, S., Shen, L., and Shuai, C. (2018). Additive Manufacturing of Bone Scaffolds. Int. J. Bioprint., 5.10.18063/ijb.v5i1.148 ↗
63. Scaffold Geometry and Computational Fluid Dynamics Simulation Supporting Osteogenic Differentiation in Dynamic Culture10.1080/10255842.2023.2195961 ↗
64. Kazimierczak, P., Kalisz, G., Sroka-Bartnicka, A., and Przekora, A. (2023). Effectiveness of the Production of Tissue-Engineered Living Bone Graft: A Comparative Study Using Perfusion and Rotating Bioreactor Systems. Sci. Rep., 13.10.1038/s41598-023-41003-w ↗
65. Radi, S., EzEldeen, M., Végvári, Á., Coates, D., Jacobs, R., Bostanci, N., and Bao, K. (2025). The Proteome of Osteoblasts in a 3D Culture Perfusion Bioreactor Model Compared with Static Conditions. Sci. Rep., 15.10.1038/s41598-025-96632-0 ↗
66. Bioreactor Systems for Human Bone Tissue Engineering10.3390/pr2020494 ↗
67. Bone Tissue Engineering Bioreactors: Dynamic Culture and the Influence of Shear Stress10.1016/j.bone.2010.09.138 ↗
68. Dupard, S.J., Garcia, A.G., and Bourgine, P.E. (2023). Customizable 3D Printed Perfusion Bioreactor for the Engineering of Stem Cell Microenvironments. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.1081145 ↗
69. Mesenchymal Stem Cell Culture within Perfusion Bioreactors Incorporating 3D-Printed Scaffolds Enables Improved Extracellular Vesicle Yield with Preserved Bioactivity10.1002/adhm.202300584 ↗
70. Enhancement of Viability of Muscle Precursor Cells on 3D Scaffold in a Perfusion Bioreactor10.1177/039139880703000509 ↗
71. Saggioro, M., D’Agostino, S., Veltri, G., Bacchiega, M., Tombolan, L., Zanon, C., Gamba, P., Serafin, V., Muraro, M.G., and Martin, I. (2023). A Perfusion-Based Three-Dimensional Cell Culture System to Model Alveolar Rhabdomyosarcoma Pathological Features. Sci. Rep., 13.10.1038/s41598-023-36210-4 ↗
72. Ribitsch, I., Baptista, P.M., Lange-Consiglio, A., Melotti, L., Patruno, M., Jenner, F., Schnabl-Feichter, E., Dutton, L.C., Connolly, D.J., and Van Steenbeek, F.G. (2020). Large Animal Models in Regenerative Medicine and Tissue Engineering: To Do or Not to Do. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00972 ↗
73. Rise of the Pigs: Utilization of the Porcine Model to Study Musculoskeletal Biomechanics and Tissue Engineering During Skeletal Growth10.1089/ten.tec.2017.0227 ↗
74. Importance of the Pig as a Human Biomedical Model10.1126/scitranslmed.abd5758 ↗
75. Li, S., Siengdee, P., Oster, M., Reyer, H., Wimmers, K., and Ponsuksili, S. (2023). Transcriptome Changes during Osteogenesis of Porcine Mesenchymal Stem Cells Derived from Different Types of Synovial Membranes and Genetic Background. Sci. Rep., 13.10.1038/s41598-023-37260-4 ↗
76. Amarasekara, D.S., Kim, S., and Rho, J. (2021). Regulation of Osteoblast Differentiation by Cytokine Networks. Int. J. Mol. Sci., 22.10.3390/ijms22062851 ↗
77. Cell Signaling and Transcriptional Regulation of Osteoblast Lineage Commitment, Differentiation, Bone Formation, and Homeostasis10.1038/s41421-024-00689-6 ↗
78. Transcriptional Regulatory Cascades in Runx2-Dependent Bone Development10.1089/ten.teb.2012.0527 ↗
79. Establishing a Critical-Size Mandibular Defect Model in Growing Pigs: Characterization of Spontaneous Healing10.1016/j.joms.2014.02.024 ↗
80. Dewey, M.J., Milner, D.J., Weisgerber, D., Flanagan, C.L., Rubessa, M., Lotti, S., Polkoff, K.M., Crotts, S., Hollister, S.J., and Wheeler, M.B. (2022). Repair of Critical-Size Porcine Craniofacial Bone Defects Using a Collagen–Polycaprolactone Composite Biomaterial. Biofabrication, 14.10.1101/2021.04.19.440506 ↗
81. A Mini-Pig Mandibular Defect Model for Evaluation of Craniomaxillofacial Bone Regeneration10.1089/ten.tec.2022.0012 ↗
82. Liu, H., Chen, H., Han, Q., Sun, B., Liu, Y., Zhang, A., Fan, D., Xia, P., and Wang, J. (2023). Recent Advancement in Vascularized Tissue-Engineered Bone Based on Materials Design and Modification. Mater. Today Bio, 23.10.1016/j.mtbio.2023.100858 ↗
83. Clinical Challenges in Bone Tissue Engineering—A Narrative Review10.1016/j.bone.2024.117363 ↗
84. Lv, N., Zhou, Z., Hou, M., Hong, L., Li, H., Qian, Z., Gao, X., and Liu, M. (2024). Research Progress of Vascularization Strategies of Tissue-Engineered Bone. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1291969 ↗
85. Kawai, T. (2025). Preclinical Evaluation and Advancements in Vascularized Bone Tissue Engineering. Biomimetics, 10.10.3390/biomimetics10070412 ↗
86. Aghali, A. (2021). Craniofacial Bone Tissue Engineering: Current Approaches and Potential Therapy. Cells, 10.10.3390/cells10112993 ↗
87. Yang, Z., Wang, C., Gao, H., Jia, L., Zeng, H., Zheng, L., Wang, C., Zhang, H., Wang, L., and Song, J. (2022). Biomechanical Effects of 3D-Printed Bioceramic Scaffolds With Porous Gradient Structures on the Regeneration of Alveolar Bone Defect: A Comprehensive Study. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.882631 ↗
88. Beyond 3D Printing: How AI Is Shaping the Future of Craniomaxillofacial Bone Tissue Engineering10.1021/acsbiomaterials.5c00420 ↗
89. Empowering Surgeons: Will Artificial Intelligence Change Oral and Maxillofacial Surgery?10.1016/j.ijom.2024.09.004 ↗
90. The Transformative Potential of Artificial Intelligence in Oral and Maxillofacial Surgery10.1016/j.joms.2024.11.017 ↗
91. Kolomenskaya, E., Butova, V., Poltavskiy, A., Soldatov, A., and Butakova, M. (2023). Application of Artificial Intelligence at All Stages of Bone Tissue Engineering. Biomedicines, 12.10.3390/biomedicines12010076 ↗
92. Harnessing the Power of Machine Learning into Tissue Engineering: Current Progress and Future Prospects10.1093/burnst/tkae053 ↗
93. Mackay, B.S., Marshall, K., Grant-Jacob, J.A., Kanczler, J., Eason, R.W., Oreffo, R.O.C., and Mills, B. (2021). The Future of Bone Regeneration: Integrating AI into Tissue Engineering. Biomed. Phys. Eng. Express, 7.10.1088/2057-1976/ac154f ↗
94. Gharehdaghi, N., Nokhbatolfoghahaei, H., and Khojasteh, A. (2025). 4D Printing of Smart Scaffolds for Bone Regeneration: A Systematic Review. Biomed. Mater., 20.10.1088/1748-605X/ad8f80 ↗