journal article·2025-11-25Open access

An Overview of 3D Bioprinting Impact on Cell Viability: From Damage Assessment to Protection Solutions

Sara Manzoli, Elena Merotto, Martina Piccoli, Pierangelo Gobbo, Silvia Todros, Piero G. Pavan

Journal of Functional Biomaterials· Volume 16· Issue 12

Abstract

Three-dimensional (3D) bioprinting has become a widely exploited tissue engineering technique for producing functional constructs that can mimic and replace native tissues. To this end, different printing strategies can be adopted, including inkjet-based, light-assisted, and extrusion-based bioprinting. Despite the great improvements that these innovative techniques introduce, cell viability maintenance during and after the bioprinting process remains a challenging open question. Indeed, the reduction in cell viability is generally related to several crucial conditions during printing, such as high shear stresses and a nutrient-deficient environment of printed constructs. In this work, the current literature on 3D bioprinting technologies is reviewed, focusing on the level of cell damage that can be imparted during biomaterial printing. In particular, extrusion bioprinting, extrusion-associated shear stress and its impact on cell viability are described in detail. The simulation of the bioprinting process through computational fluid dynamics is proposed as an appropriate method to analyze the parameters involved during bioprinting. Moreover, the viability of cells encapsulated into bioink is discussed, as well as literature techniques aimed at enhancing it by both biomaterial modifications and cell micro-encapsulation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Nanomaterials and Printing Technologies · Advanced Materials and Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Industrial Engineering, University of Padova, Via Venezia 1, 35131 Padova, Italy

Fondazione Istituto di Ricerca Pediatrica Città Della Speranza, Corso Stati Uniti, 4 F, 35127 Padova, Italy

Advanced Cellular Therapy Laboratory, Aulss 8 Berica, Vicenza Hospital, Contrà S. Francesco 41, 36100 Vicenza, Italy

Department of Chemical and Pharmaceutical Sciences, University of Trieste, Via L. Giorgieri 1, 34127 Trieste, Italy

National Interuniversity Consortium of Materials Science and Technology, Unit of Trieste, Via G. Giusti 9, 50121 Firenze, Italy

Funding

National Recovery and Resilience Plan · European Union Next Generation EU

References (100+)

Show source-provided references
1. A Comprehensive Review on Droplet-Based Bioprinting: Past, Present and Future10.1016/j.biomaterials.2016.06.012 ↗
2. 3D Bioprinting of Corneal Models: A Review of the Current State and Future Outlook10.1177/20417314231197793 ↗
3. 3D Bioprinting for Engineering Complex Tissues10.1016/j.biotechadv.2015.12.011 ↗
4. Ricci, G., Gibelli, F., and Sirignano, A. (2023). Three-Dimensional Bioprinting of Human Organs and Tissues: Bioethical and Medico-Legal Implications Examined through a Scoping Review. Bioengineering, 10.10.3390/bioengineering10091052 ↗
5. Three-Dimensional Bioprinting in Medicine: A Comprehensive Overview of Current Progress and Challenges Faced
6. Huang, Y., Zhang, X., Gao, G., Yonezawa, T., and Cui, X. (2017). 3D Bioprinting and the Current Applications in Tissue Engineering. Biotechnol. J., 12.10.1002/biot.201600734 ↗
7. Organ Bioprinting: Progress, Challenges and Outlook10.1039/D3TB01630G ↗
8. Organizational Aspects of Tissue Engineering Clinical Translation: Insights from a Qualitative Case Study10.1186/s41231-024-00179-7 ↗
9. A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering10.1007/s10439-014-1104-7 ↗
10. A Perspective on 3D Bioprinting in Tissue Regeneration10.1007/s42242-018-0020-3 ↗
11. Printing Three-Dimensional Tissue Analogues with Decellularized Extracellular Matrix Bioink10.1038/ncomms4935 ↗
12. Tissue Engineering and Regenerative Medicine 2019: The Role of Biofabrication—A Year in Review10.1089/ten.tec.2019.0344 ↗
13. A Review on Cell Damage, Viability, and Functionality during 3D Bioprinting
14. 3D Bioprinting Complex Models of Cancer10.1039/D2BM02060B ↗
15. Zhang, J., Wehrle, E., Rubert, M., and Müller, R. (2021). 3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors. Int. J. Mol. Sci., 22.10.3390/ijms22083971 ↗
16. Three-Dimensional Bioprinted Glioblastoma Microenvironments Model Cellular Dependencies and Immune Interactions10.1038/s41422-020-0338-1 ↗
17. A Roadmap to Fabricate Geometrically Accurate Three-Dimensional Scaffolds CO-Printed by Natural and Synthetic Polymers10.1115/1.4055474 ↗
18. Cell Sedimentation during 3D Bioprinting: A Mini Review10.1007/s42242-022-00183-6 ↗
19. Mechanical Cell Injury10.1196/annals.1363.006 ↗
20. 3D Bioprinting of Tissues and Organs10.1038/nbt.2958 ↗
21. Inkjet-Based Bioprinting for Tissue Engineering10.51335/organoid.2023.3.e12 ↗
22. Kačarević, Ž.P., Rider, P.M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., and Barbeck, M. (2018). An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects. Materials, 11.10.3390/ma11112199 ↗
23. Liu, J., Shahriar, M., Xu, H., and Xu, C. (2022). Cell-Laden Bioink Circulation-Assisted Inkjet-Based Bioprinting to Mitigate Cell Sedimentation and Aggregation. Biofabrication, 14.10.1088/1758-5090/ac8fb7 ↗
24. The Cell in the Ink: Improving Biofabrication by Printing Stem Cells for Skeletal Regenerative Medicine10.1016/j.biomaterials.2019.04.009 ↗
25. Inkjet Printing Biomaterials for Tissue Engineering: Bioprinting10.1179/1743280414Y.0000000040 ↗
26. Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine10.2174/187221112800672949 ↗
27. Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells10.1089/ten.2005.11.1658 ↗
28. Adhikari, J., Roy, A., Das, A., Ghosh, M., Thomas, S., Sinha, A., Kim, J., and Saha, P. (2021). Effects of Processing Parameters of 3D Bioprinting on the Cellular Activity of Bioinks. Macromol. Biosci., 21.10.1002/mabi.202000179 ↗
29. Three-Dimensional Bio-Printing Equipment Technologies for Tissue Engineering and Regenerative Medicine10.1007/s13770-016-0148-1 ↗
30. Koçak, E., Yıldız, A., and Acartürk, F. (2021). Three Dimensional Bioprinting Technology: Applications in Pharmaceutical and Biomedical Area. Colloids Surf. B Biointerfaces, 197.10.1016/j.colsurfb.2020.111396 ↗
31. Bioprinting: Inkjet Printing Proteins and Hybrid Cell-Containing Materials and Structures10.1039/b807560c ↗
32. Comprehensive Experimental Dataset on Large-Amplitude Rayleigh-Plateau Instability in Continuous InkJet Printing Regime10.1016/j.dib.2023.109941 ↗
33. Controlled Generation of Microspheres Incorporating Extracellular Matrix Fibrils for Three-Dimensional Cell Culture10.1002/adfm.201303891 ↗
34. Controlling Shear Stress in 3D Bioprinting Is a Key Factor to Balance Printing Resolution and Stem Cell Integrity10.1002/adhm.201500677 ↗
35. Micro/Nanoscale Electrohydrodynamic Printing: From 2D to 3D10.1039/C6NR04106J ↗
36. Ng, W.L., Xi, H., Shkolnikov, V., Goh, G.L., Suntornnond, R., and Yeong, W.Y. (2021). Controlling Droplet Impact Velocity and Droplet Volume: Key Factors to Achieving High Cell Viability in Sub-Nanoliter Droplet-Based Bioprinting. Int. J. Bioprint., 8.10.18063/ijb.v8i1.424 ↗
37. Impact of a Compound Droplet on a Flat Surface: A Model for Single Cell Epitaxy10.1063/1.3475527 ↗
38. Shear-Thinning Hydrogels for Biomedical Applications10.1039/C1SM06513K ↗
39. Cell-Laden Microengineered Gelatin Methacrylate Hydrogels10.1016/j.biomaterials.2010.03.064 ↗
40. 3D Inkjet-Bioprinted Lung-on-a-Chip10.1021/acsbiomaterials.3c00089 ↗
41. Oropeza, B.P., Serna, C., Furth, M.E., Solis, L.H., Gonzalez, C.E., Altamirano, V., Alvarado, D.C., Castor, J.A., Cedeno, J.A., and Chaparro Vega, D. (2022). Assessment of Angiogenesis and Cell Survivability of an Inkjet Bioprinted Biological Implant in an Animal Model. Materials, 15.10.3390/ma15134468 ↗
42. 3D Bioprinting of Tissues and Organs for Regenerative Medicine10.1016/j.addr.2018.07.004 ↗
43. A State-of-the-Art Review of Laser-Assisted Bioprinting and Its Future Research Trends10.1002/cben.202000037 ↗
44. Laser-guided Direct Writing for Three-dimensional Tissue Engineering10.1002/bit.20585 ↗
45. Laser-Guided Direct Writing of Living Cells10.1002/(SICI)1097-0290(20000205)67:3<312::AID-BIT7>3.0.CO;2-F ↗
46. Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing10.1115/1.4000101 ↗
47. Time-Resolved Study of Absorbing Film Assisted Laser Induced Forward Transfer of Trichoderma longibrachiatum Conidia10.1088/0022-3727/38/6/007 ↗
48. Xiong, R., Zhang, Z., Chai, W., Chrisey, D.B., and Huang, Y. (2017). Study of Gelatin as an Effective Energy Absorbing Layer for Laser Bioprinting. Biofabrication, 9.10.1088/1758-5090/aa74f2 ↗
49. A Novel, Well-Resolved Direct Laser Bioprinting System for Rapid Cell Encapsulation and Microwell Fabrication10.1002/adhm.201701249 ↗
50. Minaeva, E.D., Antoshin, A.A., Kosheleva, N.V., Koteneva, P.I., Gonchukov, S.A., Tsypina, S.I., Yusupov, V.I., Timashev, P.S., and Minaev, N.V. (2023). Laser Bioprinting with Cell Spheroids: Accurate and Gentle. Micromachines, 14.10.3390/mi14061152 ↗
51. Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A.R., Dawson, J.I., Yang, S., Lode, A., Oreffo, R.O.C., and Gelinsky, M. (2017). Development of a Clay Based Bioink for 3D Cell Printing for Skeletal Application. Biofabrication, 9.10.1088/1758-5090/aa7e96 ↗
52. Zhao, Y., Li, Y., Mao, S., Sun, W., and Yao, R. (2015). The Influence of Printing Parameters on Cell Survival Rate and Printability in Microextrusion-Based 3D Cell Printing Technology. Biofabrication, 7.10.1088/1758-5090/7/4/045002 ↗
53. Rossi, A., Pescara, T., Gambelli, A.M., Gaggia, F., Asthana, A., Perrier, Q., Basta, G., Moretti, M., Senin, N., and Rossi, F. (2024). Biomaterials for Extrusion-Based Bioprinting and Biomedical Applications. Front. Bioeng. Biotechnol., 12.10.3389/fbioe.2024.1393641 ↗
54. Müller, S.J., Mirzahossein, E., Iftekhar, E.N., Bächer, C., Schrüfer, S., Schubert, D.W., Fabry, B., and Gekle, S. (2020). Flow and Hydrodynamic Shear Stress inside a Printing Needle during Biofabrication. PLoS ONE, 15.10.1371/journal.pone.0236371 ↗
55. Blanco, J.C.G., Macías-García, A., Rodríguez-Rego, J.M., Mendoza-Cerezo, L., Sánchez-Margallo, F.M., Marcos-Romero, A.C., and Pagador-Carrasco, J.B. (2024). Optimising Bioprinting Nozzles through Computational Modelling and Design of Experiments. Biomimetics, 9.10.3390/biomimetics9080460 ↗
56. Boularaoui, S., Al Hussein, G., Khan, K.A., Christoforou, N., and Stefanini, C. (2020). An Overview of Extrusion-Based Bioprinting with a Focus on Induced Shear Stress and Its Effect on Cell Viability. Bioprinting, 20.10.1016/j.bprint.2020.e00093 ↗
57. The Shear Stress of It All: The Cell Membrane and Mechanochemical Transduction10.1098/rstb.2007.2128 ↗
58. Effects of Shear Stress on 3-D Human Mesenchymal Stem Cell Construct Development in a Perfusion Bioreactor System: Experiments and Hydrodynamic Modeling10.1002/bit.21184 ↗
59. Microfluidic Models of Vascular Functions10.1146/annurev-bioeng-071811-150052 ↗
60. The Stiffness of Hydrogel-Based Bioink Impacts Mesenchymal Stem Cells Differentiation toward Sweat Glands in 3D-Bioprinted Matrix10.1016/j.msec.2020.111387 ↗
61. Mechanotransduction-Enhanced Bioconstructs Fabricated Using a Bioink Comprising Collagen and Omega-3 Fatty Acids for Gingival Tissue Regeneration10.7150/thno.114503 ↗
62. Fibrillar Hydrogel Inducing Cell Mechanotransduction for Tissue Engineering10.1021/acs.biomac.4c00897 ↗
63. Effects of Dispensing Pressure and Nozzle Diameter on Cell Survival from Solid Freeform Fabrication–Based Direct Cell Writing10.1089/ten.a.2007.0004 ↗
64. Yang, G.H., Kang, D., An, S., Ryu, J.Y., Lee, K., Kim, J.S., Song, M.-Y., Kim, Y.-S., Kwon, S.-M., and Jung, W.-K. (2022). Advances in the Development of Tubular Structures Using Extrusion-Based 3D Cell-Printing Technology for Vascular Tissue Regenerative Applications. Biomater. Res., 26.10.1186/s40824-022-00321-2 ↗
65. Characterization of Cell Viability during Bioprinting Processes10.1002/biot.200900004 ↗
66. The 3D Printing of Gelatin Methacrylamide Cell-Laden Tissue-Engineered Constructs with High Cell Viability10.1016/j.biomaterials.2013.09.078 ↗
67. Li, M., Tian, X., Kozinski, J.A., Chen, X., and Hwang, D.K. (2015). Modeling mechanical cell damage in the bioprinting process employing a conical needle. J. Mech. Med. Biol., 15.10.1142/S0219519415500736 ↗
68. Characterization of Cell Damage and Proliferative Ability during and after Bioprinting10.1021/acsbiomaterials.8b00714 ↗
69. Immohr, M.B., Dos Santos Adrego, F., Teichert, H.L., Schmidt, V., Sugimura, Y., Bauer, S., Barth, M., Lichtenberg, A., and Akhyari, P. (2023). 3D-Bioprinting of Aortic Valve Interstitial Cells: Impact of Hydrogel and Printing Parameters on Cell Viability. Biomed. Mater., 18.10.1088/1748-605X/ac9f91 ↗
70. Process Optimization for Coaxial Extrusion-Based Bioprinting: A Comprehensive Analysis of Material Behavior, Structural Precision, and Cell Viability
71. Strauß, S., Grijalva Garces, D., and Hubbuch, J. (2023). Analytics in Extrusion-Based Bioprinting: Standardized Methods Improving Quantification and Comparability of the Performance of Bioinks. Polymers, 15.10.3390/polym15081829 ↗
72. Boularaoui, S., Shanti, A., Khan, K.A., Iacoponi, S., Christoforou, N., and Stefanini, C. (2022). Harnessing Shear Stress Preconditioning to Improve Cell Viability in 3D Post-Printed Biostructures Using Extrusion Bioprinting. Bioprinting, 25.10.1016/j.bprint.2021.e00184 ↗
73. Yu, Y., Zhang, Y., Martin, J.A., and Ozbolat, I.T. (2013). Evaluation of Cell Viability and Functionality in Vessel-like Bioprintable Cell-Laden Tubular Channels. J. Biomech. Eng., 135.10.1115/1.4024575 ↗
74. Demir, E., Metli, S.N., Tutum, B.E., Gokyer, S., Oto, C., and Yilgor, P. (2025). Hand-Held Bioprinters Assisting in Situ Bioprinting. Biomed. Mater., 20.10.1088/1748-605X/adbcee ↗
75. Pazhouhnia, Z., Beheshtizadeh, N., Namini, M.S., and Lotfibakhshaiesh, N. (2022). Portable Hand-held Bioprinters Promote in Situ Tissue Regeneration. Bioeng. Transl. Med., 7.10.1002/btm2.10307 ↗
76. Handheld Skin Printer: In Situ Formation of Planar Biomaterials and Tissues10.1039/C7LC01236E ↗
77. O’Connell, C.D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C.J., Chung, J., Gambhir, S., and Yue, Z. (2016). Development of the Biopen: A Handheld Device for Surgical Printing of Adipose Stem Cells at a Chondral Wound Site. Biofabrication, 8.10.1088/1758-5090/8/1/015019 ↗
78. MacAdam, A., Chaudry, E., McTiernan, C.D., Cortes, D., Suuronen, E.J., and Alarcon, E.I. (2022). Development of in Situ Bioprinting: A Mini Review. Front. Bioeng. Biotechnol., 10.10.3389/fbioe.2022.940896 ↗
79. Gironi, P., Petraro, L., Santoni, S., Dedé, L., and Colosimo, B.M. (2023). A Computational Model of Cell Viability and Proliferation of Extrusion-Based 3D-Bioprinted Constructs during Tissue Maturation Process. Int. J. Bioprint., 9.10.18063/ijb.741 ↗
80. Guarnera, D., Restaino, F., Vannozzi, L., Trucco, D., Mazzocchi, T., Worwąg, M., Gapinski, T., Lisignoli, G., Zaffagnini, S., and Russo, A. (2024). Arthroscopic Device with Bendable Tip for the Controlled Extrusion of Hydrogels on Cartilage Defects. Sci. Rep., 14.10.1038/s41598-024-70426-2 ↗
81. Freeform Inkjet Printing of Cellular Structures with Bifurcations10.1002/bit.25501 ↗
82. Scaffold-free Inkjet Printing of Three-dimensional Zigzag Cellular Tubes10.1002/bit.24591 ↗
83. Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology10.1089/ten.tea.2011.0543 ↗
84. Kawecki, F., Clafshenkel, W.P., Auger, F.A., Bourget, J.-M., Fradette, J., and Devillard, R. (2018). Self-Assembled Human Osseous Cell Sheets as Living Biopapers for the Laser-Assisted Bioprinting of Human Endothelial Cells. Biofabrication, 10.10.1088/1758-5090/aabd5b ↗
85. Laser-Assisted Bioprinting at Different Wavelengths and Pulse Durations with a Metal Dynamic Release Layer: A Parametric Study10.18063/IJB.2017.01.001 ↗
86. Koch, L., Deiwick, A., Franke, A., Schwanke, K., Haverich, A., Zweigerdt, R., and Chichkov, B. (2018). Laser Bioprinting of Human Induced Pluripotent Stem Cells—The Effect of Printing and Biomaterials on Cell Survival, Pluripotency, and Differentiation. Biofabrication, 10.10.1088/1758-5090/aab981 ↗
87. Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications10.1007/s10439-016-1704-5 ↗
88. Extrusion-Based 3D Printing of Photo-Crosslinkable Gelatin and κ-Carrageenan Hydrogel Blends for Adipose Tissue Regeneration10.1016/j.ijbiomac.2019.08.124 ↗
89. 3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels10.1021/acsbiomaterials.6b00643 ↗
90. Balancing Forces: Architectural Control of Mechanotransduction10.1038/nrm3112 ↗
91. Mohammed, D., Versaevel, M., Bruyère, C., Alaimo, L., Luciano, M., Vercruysse, E., Procès, A., and Gabriele, S. (2019). Innovative Tools for Mechanobiology: Unraveling Outside-In and Inside-Out Mechanotransduction. Front. Bioeng. Biotechnol., 7.10.3389/fbioe.2019.00162 ↗
92. EDTA Enhances High-Throughput Two-Dimensional Bioprinting by Inhibiting Salt Scaling and Cell Aggregation at the Nozzle Surface10.1002/term.162 ↗
93. Gaseous Flow Focusing for Spinning Micro and Nanofibers10.1016/j.polymer.2019.121623 ↗
94. Smooth Printing of Viscoelastic Microfilms with a Flow Focusing Ejector10.1016/j.jnnfm.2017.09.004 ↗
95. Shi, J., Wu, B., Li, S., Song, J., Song, B., and Lu, W.F. (2018). Shear Stress Analysis and Its Effects on Cell Viability and Cell Proliferation in Drop-on-Demand Bioprinting. Biomed. Phys. Eng. Express, 4.10.1088/2057-1976/aac946 ↗
96. Reina-Romo, E., Mandal, S., Amorim, P., Bloemen, V., Ferraris, E., and Geris, L. (2021). Towards the Experimentally-Informed In Silico Nozzle Design Optimization for Extrusion-Based Bioprinting of Shear-Thinning Hydrogels. Front. Bioeng. Biotechnol., 9.10.3389/fbioe.2021.701778 ↗
97. Wei, Q., An, Y., Li, M., and Zhao, X. (2024). Research on the Flow Behavior of Bio-Ink inside the Extrusion Nozzle during Printing. J. Appl. Phys., 136.10.1063/5.0234193 ↗
98. Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs10.1089/ten.2004.10.1566 ↗
99. Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System10.1089/ten.2006.12.83 ↗
100. Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries10.1089/ten.2006.12.1325 ↗