journal article·2025-02-21Open access

Integrating Machine Learning into Additive Manufacturing of Metallic Biomaterials: A Comprehensive Review

Shangyan Zhao, Yixuan Shi, Chengcong Huang, Xuan Li, Yuchen Lu, Yuzhi Wu, Yageng Li, Luning Wang

Abstract

The global increase in osteomuscular diseases, particularly bone defects and fractures, has driven the growing demand for metallic implants. Additive manufacturing (AM) has emerged as a transformative technology for producing high-precision metallic biomaterials with customized properties, offering significant advantages over traditional manufacturing methods. The integration of machine learning (ML) with AM has shown great promise in optimizing the fabrication process, enhancing material performance, and predicting long-term behavior, particularly in the development of orthopedic implants and vascular stents. This review explores the application of ML in AM of metallic biomaterials, focusing on four key areas: (1) component design, where ML guides the optimization of multi-component alloys for improved mechanical and biological properties; (2) structural design, enabling the creation of intricate porous architectures tailored to specific functional requirements; (3) process control, facilitating real-time monitoring and adjustment of manufacturing parameters; and (4) parameter optimization, which reduces costs and enhances production efficiency. This review offers a comprehensive overview of four key aspects, presenting relevant research and providing an in-depth analysis of the current state of ML-guided AM techniques for metallic biomaterials. It enables readers to gain a thorough understanding of the latest advancements in this field. Additionally, the this review addresses the challenges in predicting in vivo performance, particularly degradation behavior, and how ML models can assist in bridging the gap between in vitro tests and clinical outcomes. The integration of ML in AM holds great potential to accelerate the design and production of advanced metallic biomaterials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Advanced Innovation Center for Materials Genome Engineering, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

Institute of Materials Intelligent Technology, Liaoning Academy of Materials, Shenyang 110004, China

Funding

National Key Research & Development Program of China · National Natural Science Foundation of China · Natural Science Foundation of Beijing · Beijing Nova Program · Interdisciplinary Research Project for Young Teachers of USTB

References (100+)

Show source-provided references
1. Powders for powder bed fusion: A review10.1007/s40964-019-00078-6 ↗
2. Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysis10.1016/j.actbio.2019.05.056 ↗
3. Additively Manufactured Absorbable Porous Metal Implants—Processing, Alloying and Corrosion Behavior10.3389/fmats.2021.628633 ↗
4. Zinc based biodegradable metals for bone repair and regeneration: Bioactivity and molecular mechanisms10.1016/j.mtbio.2023.100932 ↗
5. Additive manufacturing of vascular stents10.1016/j.actbio.2023.06.014 ↗
6. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗
7. Mechanical and surface properties of Co-Cr alloy produced by additive manufacturing for removable partial denture frameworks10.1016/j.prosdent.2021.12.019 ↗
8. Zhang, Y., Lv, Z., Luo, X., Qiang, H., He, J., Hou, C., Li, Y., Liu, F., and Wang, L. (2024). Synergistic release of copper and lithium components in biodegradable zinc alloy for osteoimmunomodulation. Rare Met.10.1007/s12598-024-02930-3 ↗
9. A manufacturing and annealing protocol to develop a cold-sprayed Fe-316L stainless steel biodegradable stenting material10.1016/j.actbio.2019.08.034 ↗
10. Dual modulation of bone formation and resorption with zoledronic acid-loaded biodegradable magnesium alloy implants improves osteoporotic fracture healing: An in vitro and in vivo study10.1016/j.actbio.2017.10.033 ↗
11. Study on Corrosion Properties of Medical Mg-Zn Alloy10.4028/www.scientific.net/KEM.777.607 ↗
12. Additively manufactured functionally graded biodegradable porous iron10.1016/j.actbio.2019.07.013 ↗
13. Machine Learning for Advanced Additive Manufacturing10.1016/j.matt.2020.08.023 ↗
14. Machine Learning in Additive Manufacturing: A Review
15. Deep learning10.1038/nature14539 ↗
16. Biodegradable Zn-Cu alloys show antibacterial activity against MRSA bone infection by inhibiting pathogen adhesion and biofilm formation10.1016/j.actbio.2020.09.041 ↗
17. The effect of topological design on the degradation behavior of additively manufactured porous zinc alloy10.1038/s41529-024-00451-z ↗
18. Additively manufactured biodegradable Zn metamaterials with tunable Poisson’s ratio and enhanced mechanical properties10.1080/17452759.2025.2460209 ↗
19. Laser additive manufacturing of high-performance metal components
20. Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures10.1016/j.matdes.2019.108164 ↗
21. Progress and Challenges of Laser Direct Manufacturing of Large Titanium Structural Components(Invited Paper)10.3788/CJL20093612.3204 ↗
22. Lorusso, M., Trevisan, F., Calignano, F., Lombardi, M., and Manfredi, D. (2020). A357 Alloy by LPBF for Industry Applications. Materials, 13.10.3390/ma13071488 ↗
23. Cortis, D., Pilone, D., Grazzi, F., Broggiato, G., Campana, F., Orlandi, D., Shinohara, T., and Planell, O.S. (2024). Functionally graded material via L-PBF: Characterisation of multi-material junction between steels (AISI 316L/16MnCr5), copper (CuCrZr) and aluminium alloys (Al-Sc/AlSi10Mg). Prog. Addit. Manuf.10.1007/s40964-024-00761-3 ↗
24. Parvez, M.M., Pan, T., Chen, Y., Karnati, S., Newkirk, J.W., and Liou, F. (2020). High Cycle Fatigue Performance of LPBF 304L Stainless Steel at Nominal and Optimized Parameters. Materials, 13.10.3390/ma13071591 ↗
25. Linking alloy thermo-physical behavior to laser process parameters for density optimization in LPBF10.1007/s00170-023-12501-y ↗
26. Numerical and experimental study of molten pool behaviour and defect formation in multi-material and functionally graded materials laser powder bed fusion10.1016/j.apt.2021.09.036 ↗
27. On the thermomechanical aging of LPBF alloy 71810.1016/j.msea.2022.142998 ↗
28. Binder jetting: A review of process, materials, and methods
29. Influence of powder type and binder saturation on binder jet 3D–printed and sintered Inconel 625 samples10.1007/s00170-021-07496-3 ↗
30. Model Approach for Binder Selection in Binder Jetting10.1021/acs.iecr.1c02856 ↗
31. Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds10.1016/j.actbio.2011.08.027 ↗
32. Slurry-based powder beds for the selective laser sintering of silicate ceramics
33. Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges10.1016/j.pmatsci.2020.100707 ↗
34. Özel, T., Shokri, H., and Loizeau, R. (2023). A Review on Wire-Fed Directed Energy Deposition Based Metal Additive Manufacturing. J. Manuf. Mater. Process., 7.10.3390/jmmp7010045 ↗
35. Critical review of the state of the art in multi-material fabrication via directed energy deposition10.1016/j.cossms.2021.100924 ↗
36. An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
37. In-situ powder mixing for laser-based directed energy deposition of functionally graded materials10.1007/s40436-023-00460-2 ↗
38. Effect of interlayers and scanning strategies on through-thickness residual stress distributions in additive manufactured ferritic-austenitic steel structure10.1016/j.msea.2018.12.078 ↗
39. Development of multi-defect diagnosis algorithm for the directed energy deposition (DED) process with in situ melt-pool monitoring10.1007/s00170-022-10711-4 ↗
40. Thermal behavior of coated powder during directed energy deposition (DED)10.1016/j.mtla.2024.102235 ↗
41. Temporal convolutional networks for data-driven thermal modeling of directed energy deposition10.1016/j.jmapro.2022.11.063 ↗
42. Additive manufacturing of functionally graded metallic materials using laser metal deposition
43. From In Vitro to Retrieval Studies of Orthopedic Implants10.5006/2576 ↗
44. Additive manufactured metallic implants for orthopaedic applications10.1007/s40843-017-9243-9 ↗
45. Electron beam melting in the fabrication of three-dimensional mesh titanium mandibular prosthesis scaffold10.1038/s41598-017-15564-6 ↗
46. A new 3D printing porous trabecular titanium metal acetabular cup for primary total hip arthroplasty: A minimum 2-year follow-up of 92 consecutive patients10.1186/s13018-020-01913-1 ↗
47. Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: A review of the literature10.4047/jap.2014.6.2.138 ↗
48. Grain growth during selective laser melting of a Co-Cr-Mo Alloy10.1007/s10853-017-0975-z ↗
49. Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering10.1016/j.msec.2014.12.009 ↗
50. Effect of building direction on the mechanical anisotropy of biocompatible Co-Cr-Mo alloy manufactured by selective laser melting process10.1016/j.jallcom.2020.155055 ↗
51. Anisotropic microstructure and mechanical properties of additively manufactured Co-Cr-Mo alloy using selective electron beam melting for orthopedic implants10.1016/j.msea.2019.138270 ↗
52. Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting10.1016/j.corsci.2020.108688 ↗
53. Brogini, S., Sartori, M., Giavaresi, G., Cremascoli, P., Alemani, F., Bellini, D., Martini, L., Maglio, M., Pagani, S., and Fini, M. (2021). Osseointegration of additive manufacturing Ti-6Al-4V and Co-Cr-Mo Alloys, with and without Surface Functionalization with Hydroxyapatite and Type I Collagen. J. Mech. Behav. Biomed. Mater., 115.10.1016/j.jmbbm.2020.104262 ↗
54. Toh, W.Q., Tan, X., Sun, Z., Liu, E., Tor, S.B., and Chua, C.K. (2016, January 16–19). Comparative study on tribological behavior of Ti-6Al-4V and Co-Cr-Mo samples additively manufactured with electron beam melting. Proceedings of the 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016), Singapore.
55. Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr Alloys10.1016/j.apsusc.2018.02.246 ↗
56. When it is not an infection: Metal allergy after the nuss procedure for repair of pectus excavatum10.1016/j.jpedsurg.2006.09.056 ↗
57. Karthika, P., Olha, B., Ming, C., Madison, R., Liam, F., Jordan, S., Richard, S., Marcus, T., Cameron, C., and Alex, C. (2017). Metallic biomaterials: Current challenges and opportunities. Materials, 10.10.3390/ma10080884 ↗
58. Kruth, J., Broucke, B.V.D., Vaerenbergh, J., and Naert, I. (2005, January 4–5). Rapid manufacturing of dental prostheses by means of selective laser sintering/melting. Proceedings of the Les 11èmes Assises Europeennes du Prototypage Rapide (AFPR) 2005, Paris, France.10.1108/13552540510573365 ↗
59. Biodegradable materials for bone defect repair
60. The History of biodegradable magnesium implants: A review10.1016/j.actbio.2010.02.028 ↗
61. Influence of Trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys10.1016/j.actbio.2015.05.004 ↗
62. Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process10.1016/j.matlet.2021.130283 ↗
63. Additive manufacturing of magnesium alloys
64. Recent progress and perspectives in additive manufacturing of magnesium alloys10.1016/j.jma.2022.03.001 ↗
65. An Experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of selective laser melting 316L stainless steel10.1016/j.msea.2022.142683 ↗
66. An assessment of ultra fine grained 316L stainless steel for implant applications10.1016/j.actbio.2015.10.043 ↗
67. Research on an Mg-Zn Alloy as a degradable biomaterial10.1016/j.actbio.2009.06.028 ↗
68. Biological responses and mechanisms of human bone marrow mesenchymal stem cells to Zn and Mg biomaterials10.1021/acsami.7b06654 ↗
69. Biocompatibility and biodegradation studies of a commercial zinc alloy for temporary mini-implant applications10.1038/s41598-017-15873-w ↗
70. Comparative investigation of the corrosion behavior of biomedical zinc alloys in oxygen-enriched simulated body fluid environments10.1016/j.mtcomm.2024.108811 ↗
71. Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties10.1016/j.matdes.2019.107937 ↗
72. Mimicking the mechanical properties of cortical bone with an additively manufactured biodegradable Zn-3Mg alloy10.1016/j.actbio.2024.05.023 ↗
73. Development of a simulation approach for laser powder bed fusion based on scanning strategy selection10.1007/s00170-020-05603-4 ↗
74. Preliminary investigation of keyhole phenomena during single layer fabrication in laser additive manufacturing of stainless steel10.1016/j.phpro.2015.11.052 ↗
75. Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks
76. Infrared thermography for laser-based powder bed fusion additive manufacturing processes10.1063/1.4864956 ↗
77. Achieving ultra-high strength and ductility in Mg-9Al-1Zn-0.5Mn alloy via selective laser melting10.1016/j.apmate.2022.100097 ↗
78. Microstructure and mechanical deformation behavior of selective laser melted Ti6Al4V ELI alloy porous structures10.1016/j.matlet.2020.128366 ↗
79. Machine learning application development: Practitioners’ insights10.1007/s11219-023-09621-9 ↗
80. A logical calculus of the ideas immanent in nervous activity10.1007/BF02478259 ↗
81. Minsky, M., and Papert, S. (2017). Perceptrons, Reissue of the 1988 Expanded Edition with a New Foreword by Léon Bottou: An Introduction to Computational Geometry, MIT Press.10.7551/mitpress/11301.001.0001 ↗
82. A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring10.1007/s40964-019-00108-3 ↗
83. Extraction and evaluation of melt pool, plume, and spatter information for powder-bed fusion AM process monitoring10.1016/j.matdes.2018.07.002 ↗
84. Prediction of selective laser melting part quality using hybrid Bayesian network
85. Methods for rapid pore classification in metal additive manufacturing10.1007/s11837-019-03761-9 ↗
86. Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning
87. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-oriented design strategy10.1016/j.jmst.2021.05.011 ↗
88. Alloy design against the solidification cracking in fusion additive manufacturing: An application to a FeCrAl alloy10.1080/21663831.2021.1922945 ↗
89. Mechanical properties of additively manufactured lattice structures designed by deep learning10.1016/j.tws.2023.111475 ↗
90. PATO: Producibility-aware topology optimization using deep learning for metal additive manufacturing10.1007/s12008-024-01905-z ↗
91. Correlations between thermal history and keyhole porosity in laser powder bed fusion
92. Machine learning for metal additive manufacturing: Predicting temperature and melt pool fluid dynamics using physics-informed neural networks10.1007/s00466-020-01952-9 ↗
93. Fundamentals of selective laser melting of alloyed steel powders10.1016/S0007-8506(07)60395-3 ↗
94. Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting10.1016/j.actamat.2017.05.061 ↗
95. Using machine learning to aid in the parameter optimization process for metal-based additive manufacturing10.1108/RPJ-08-2019-0213 ↗
96. Chen, Y., Wang, H., Wu, Y., and Wang, H. (2020). Predicting the printability in selective laser melting with a supervised machine learning method. Materials, 13.10.3390/ma13225063 ↗
97. Focus variation measurement and prediction of surface texture parameters using machine learning in laser powder bed fusion
98. Machine learning based data-driven inkjet printed electronics: Jetting prediction for novel inks10.1088/2058-8585/ac5a39 ↗
99. Forecasting of process parameters using machine learning techniques for wire arc additive manufacturing process10.1016/j.matpr.2022.12.081 ↗
100. Assi, M., Favre, J., Brykala, M., Tancret, F., and Fraczkiewicz, A. (2024). Design and assessment of an austenitic stainless alloy for laser powder bed additive manufacturing. Appl. Sci., 14.10.20944/preprints202409.0079.v1 ↗