journal article·2025-02-04Open access

Towards the Standardization of Artificial Aging Protocols for Dental Composites: Evaluation of Proposed Methods

Agata Szczesio-Wlodarczyk, Karolina Kopacz, Katarzyna Ranoszek-Soliwoda, Jerzy Sokolowski, Kinga Bociong

Abstract

In restorative dentistry, there are no standardized in vitro accelerated aging methods to evaluate the long-term stability of dental composites. Current research aimed at extending the clinical success of restorations emphasizes the need for post-aging evaluation. This study represents the final stage of assessing three selected aging protocols that utilize a 0.1 M sodium hydroxide solution as the primary agent to accelerate degradation processes. Twelve resin-based composites, categorized into five types, were evaluated for flexural strength (FS), diametral tensile strength (DTS), hardness (HV), and fracture toughness (FT) both before and after aging. The proposed aging methods significantly degraded the mechanical properties of most materials, highlighting the effectiveness of 0.1 M NaOH as a medium for hydrolytic stability testing. Materials with a high filler content (approximately 80 wt.%) were notably prone to degradation, underscoring the importance of optimizing the filler and coupling agent. The findings suggest that incorporating thermocycling into aging protocols may enhance the development and evaluation of innovative dental composites. This work contributes to establishing a foundation for standardized aging protocols, supporting the accurate assessment of composites in vitro.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Dental Research and COVID-19

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University Laboratory of Materials Research, Medical University of Lodz, Pomorska 251, 92-213 Lodz, Poland

“DynamoLab” Academic Laboratory of Movement and Human Physical Performance, Medical University of Lodz, 92-213 Lodz, Poland

Faculty of Medical Sciences, Warsaw Medical Academy, 02-091 Warszawa, Poland

Department of Materials Technology and Chemistry, Faculty of Chemistry, University of Lodz, 90-236 Lodz, Poland

Department of General Dentistry, Medical University of Lodz, 92-213 Lodz, Poland

Funding

National Science Centre, Poland

References (63)

Show source-provided references
1. Oral Health for Healthy Ageing: A People-centred and Function-focused Approach10.1016/j.identj.2022.06.001 ↗
2. Time to take oral health seriously10.1016/S2666-7568(22)00246-X ↗
3. Digital health for aging populations10.1038/s41591-023-02391-8 ↗
4. Ferracane, J.L. (2024). A Historical Perspective on Dental Composite Restorative Materials. J. Funct. Biomater., 15.10.3390/jfb15070173 ↗
5. He, J., Lassila, L., Garoushi, S., and Vallittu, P. (2023). Tailoring the monomers to overcome the shortcomings of current dental resin composites—Review. Biomater. Investig. Dent., 10.10.1080/26415275.2023.2191621 ↗
6. The Evolution of Dental Materials over the Past Century: Silver and Gold to Tooth Color and Beyond10.1177/0022034518822808 ↗
7. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
8. Relation of dental composite formulations to their degradation and the release of hydrolyzed polymeric-resin-derived products10.1177/10454411010120020401 ↗
9. Influence of pH environment on polymer based dental material properties10.1016/j.jdent.2004.08.004 ↗
10. A review of dental composites: Challenges, chemistry aspects, filler influences, and future insights10.1016/j.compositesb.2021.108852 ↗
11. A review and current state of autonomic self-healing microcapsules-based dental resin composites10.1016/j.dental.2019.12.005 ↗
12. Analysis of the Degradation of a Model Dental Composite
13. An Artificial Oral Environment for Testing Dental Materials10.1109/10.133228 ↗
14. Spatafora, G., Li, Y., He, X., Cowan, A., and Tanner, A.C.R. (2024). The Evolving Microbiome of Dental Caries. Microorganisms, 12.10.3390/microorganisms12010121 ↗
15. Izdebska, J. (2015). Aging and Degradation of Printed Materials. Printing on Polymers: Fundamentals and Applications, Elsevier Inc.10.1016/B978-0-323-37468-2.00022-1 ↗
16. Szczesio-Wlodarczyk, A., Sokolowski, J., Kleczewska, J., and Bociong, K. (2020). Ageing of dental composites based on methacrylate resins-A critical review of the causes and method of assessment. Polymers, 12.10.3390/polym12040882 ↗
17. Szczesio-Wlodarczyk, A., Fronczek, M., Ranoszek-Soliwoda, K., Grobelny, J., Sokolowski, J., and Bociong, K. (2022). The First Step in Standardizing an Artificial Aging Protocol for Dental Composites—Evaluation of Basic Protocols. Molecules, 27.10.3390/molecules27113511 ↗
18. Szczesio-Wlodarczyk, A., Fronczek, M., Ranoszek-Soliwoda, K., Sokolowski, J., and Bociong, K. (2024). Evaluation of Selected Artificial Aging Protocols for Dental Composites Including Fatigue and Fracture Tests. Appl. Sci., 14.10.3390/app14166964 ↗
19. Krüger, J., Maletz, R., Ottl, P., and Warkentin, M. (2018). In vitro aging behavior of dental composites considering the influence of filler content, storage media and incubation time. PLoS ONE, 13.10.1371/journal.pone.0195160 ↗
20. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review10.1016/j.jmbbm.2013.09.013 ↗
21. Effect of low shrinkage monomers on physicochemical properties of dental resin composites10.1590/0103-6440201300401 ↗
22. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO 4049:2019).
23. New American Dental Association specification no. 27 for direct filling resins. Council on Dental Materials and Devices10.14219/jada.archive.1977.0360 ↗
24. Fracture toughness of seven resin composites evaluated by three methods of mode I fracture toughness (KIc)10.4012/dmj.2016-140 ↗
25. Effect of cyclic loading and environmental aging on the fracture toughness of dental resin composite
26. Leaching and mechanical properties characterization of dental composites10.1002/jbm.b.30074 ↗
27. Influence of artificial aging: Mechanical and physicochemical properties of dental composites under static and dynamic compression10.1007/s00784-021-04122-0 ↗
28. Water sorption characteristics of restorative dental composites immersed in acidic drinks10.1016/j.dental.2012.03.011 ↗
29. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment10.1046/j.1365-2842.2001.00802.x ↗
30. Pivotal role of filler/matrix interface in dental composites: Review
31. Guo, X., Yu, Y., Gao, S., Zhang, Z., and Zhao, H. (2022). Biodegradation of Dental Resin-Based Composite—A Potential Factor Affecting the Bonding Effect: A Narrative Review. Biomedicines, 10.10.3390/biomedicines10092313 ↗
32. In vitro aging of dental composites in water--effect of degree of conversion, filler volume, and filler/matrix coupling10.1002/(SICI)1097-4636(19981205)42:3<465::AID-JBM17>3.0.CO;2-F ↗
33. Abdullah, M.A., and Inamuddin, A.M. (2018). Degradation and failure of dental composite materials. Applications of Nanocomposite Materials in Dentistry, Woodhead Publishing.
34. Effects of filler size on the mechanical properties of polymer-filled dental composites: A review of recent developments10.21315/jps2018.29.1.10 ↗
35. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins10.1111/j.1365-2842.1990.tb01419.x ↗
36. Investigation of the correlation between the different mechanical properties of resin composites10.4012/dmj.2012-178 ↗
37. Influence of filler characteristics on the performance of dental composites: A comprehensive review10.1016/j.ceramint.2022.06.314 ↗
38. Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties10.1016/j.dental.2016.09.034 ↗
39. Investigations on mechanical behaviour of dental composites10.1007/s00784-009-0258-4 ↗
40. Internal Corrosion in Dental Composite Wear: Its Significance and Simulation10.1002/1097-4636(2000)53:4<371::AID-JBM11>3.0.CO;2-N ↗
41. Degradation of Glass Filler in Experimental Composites10.1177/00220345810600110701 ↗
42. Factors involved in mechanical fatigue degradation of dental resin composites10.1177/0022034513490734 ↗
43. Diametral tensile strength and dental composites10.1016/S0109-5641(87)80062-3 ↗
44. Wear and Microhardness of Different Resin Composite Materials
45. Hydrolytic stability of dental composites: One-year aging effect on surface roughness and surface / subsurface hardness
46. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins10.1016/S0142-9612(02)00380-0 ↗
47. Water absorption characteristics of dental composites incorporating hydroxyapatite filler10.1016/S0142-9612(01)00331-3 ↗
48. The mechanical stability of nano-hybrid composites with new methacrylate monomers for matrix compositions10.1016/j.dental.2011.11.007 ↗
49. Synthesis, properties and applications of inorganic-organic copolymers (ORMOCER®s)10.1016/S1359-0286(00)00009-7 ↗
50. The effect of aging methods on the fracture toughness and physical stability of an Oxirane/Acrylate, Ormocer, and Bis-GMA based resin composites10.1007/s00784-019-02912-1 ↗
51. Mechanical and hydrolytic degradation of an Ormocer®-based Bis-GMA-free resin composite10.1007/s00784-018-2651-3 ↗
52. Sol—Gel materials 2. Light-curing dental composites based on ormocers of cross-linking alkoxysilane methacrylates and further nano-components10.1016/j.dental.2007.10.004 ↗
53. Fracture Toughness Testing of Dental Restoratives: A Critical Evaluation10.1007/s40496-018-0184-0 ↗
54. In vitro fracture toughness of human dentin10.1002/jbm.a.10548 ↗
55. Fracture toughness of dental restorative materials10.1007/s00784-011-0525-z ↗
56. Variables Affecting the Fracture Toughness of Dental Composites10.1177/00220345870660060901 ↗
57. Resin-based composite performance: Are there some things we can’t predict?10.1016/j.dental.2012.06.013 ↗
58. Fracture Toughness of Experimental Dental Composites Aged in Ethanol10.1177/00220345950740071501 ↗
59. Bis-GMA co-polymerizations: Influence on conversion, flexural properties, fracture toughness and susceptibility to ethanol degradation of experimental composites10.1016/j.dental.2009.03.010 ↗
60. Szczesio-Wlodarczyk, A., Kopacz, K., Szynkowska-Jozwik, M.I., Sokolowski, J., and Bociong, K. (2022). An Evaluation of the Hydrolytic Stability of Selected Experimental Dental Matrices and Composites. Materials, 15.10.3390/ma15145055 ↗
61. Szczesio-Wlodarczyk, A., Barszczewska-Rybarek, I.M., Chrószcz-Porębska, M.W., Kopacz, K., Sokolowski, J., and Bociong, K. (2023). Can Modification with Urethane Derivatives or the Addition of an Anti-Hydrolysis Agent Influence the Hydrolytic Stability of Resin Dental Composite?. Int. J. Mol. Sci., 24.10.3390/ijms24054336 ↗
62. A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materials10.1016/j.dental.2021.01.010 ↗
63. Pieniak, D., Niewczas, A.M., Pikuła, K., Gil, L., Krzyzak, A., Przystupa, K., Kordos, P., and Kochan, O. (2023). Effect of Hydrothermal Factors on the Microhardness of Bulk-Fill and Nanohybrid Composites. Materials, 16.10.3390/ma16052130 ↗