Manufacturing, Microstructure, and Mechanics of 316L SS Biomaterials by Laser Powder Bed Fusion
Source abstract
Abstract
Laser powder bed fusion (LPBF) is an advanced additive manufacturing technology that is gaining increasing interest for biomedical implants because it can produce dense, patient-specific metallic components with controlled microstructures. This study investigated the LPBF fabrication of 316L stainless steel, which is widely used in orthopedic and dental implants, and examined the effects of laser power and scanning speed on the microstructure and mechanical properties relevant to biomedical applications. The study achieved 99.97% density and refined columnar and cellular austenitic grains, with optimized molten pool morphology. The optimal LPBF parameters, 190 W laser power and 700 mm/s, produced a tensile strength of 762.83 MPa and hardness of 253.07 HV0.2, which exceeded the values of conventional cast 316L stainless steel. These results demonstrated the potential of optimized LPBF 316L stainless steel for functional biomedical applications that require high mechanical integrity and biocompatibility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanics and Construction Engineering, Jinan University, Guangzhou 510632, China
Laser Processing Research Laboratory, School of Engineering, The University of Manchester, Manchester M13 9PL, UK
College of Packaging Engineering, Jinan University, Zhuhai 519070, China
Funding
Henry Royce Institute
References (66)
Show source-provided references
1. A Review on Parameters Affecting Properties of Biomaterial SS 316L10.1080/14484846.2020.1752975 ↗
2. Ali, S., Irfan, M., Niazi, U.M., Rani, A.M.A., Rashedi, A., Rahman, S., Khan, M.K.A., Alsaiari, M.A., Legutko, S., and Petrů, J. (2022). Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials, 15.10.3390/ma15082822 ↗
3. Low Friction and High Strength of 316L Stainless Steel Tubing for Biomedical Applications10.1016/j.msec.2016.10.005 ↗
4. Corrosion Resistance of Magnetoelectropolished AISI 316L SS Biomaterial10.1108/ACMM-03-2013-1249 ↗
5. Optimization of Electrochemical Corrosion Behavior of 316L Stainless Steel as an Effective Biomaterial for Orthopedic Applications10.1016/j.matpr.2022.02.501 ↗
6. Metallic Biomaterials10.1007/s10047-008-0422-7 ↗
7. A Comprehensive Study of LPBF Parameter Influence in 316L Stainless Steel Mechanical Properties, Macrostructure, and Printability
8. Gatto, M.L., Cerqueni, G., Groppo, R., Santecchia, E., Tognoli, E., Defanti, S., Mattioli-Belmonte, M., and Mengucci, P. (2023). Improved Biomechanical Behavior of 316L Graded Scaffolds for Bone Tissue Regeneration Produced by Laser Powder Bed Fusion. J. Mech. Behav. Biomed. Mater., 144.10.1016/j.jmbbm.2023.105989 ↗
9. Additive Manufacturing of Metallic Biomaterials: A Concise Review10.1007/s43452-023-00730-7 ↗
10. Additively Manufactured Metallic Biomaterials
11. A Review on the Wear Performance of Additively Manufactured 316L Stainless Steel: Process, Structure, and Performance10.1007/s10853-025-10775-z ↗
12. Rahmani, R., Lopes, S.I., and Prashanth, K.G. (2023). Selective Laser Melting and Spark Plasma Sintering: A Perspective on Functional Biomaterials. J. Funct. Biomater., 14.10.3390/jfb14100521 ↗
13. Microstructure and Mechanical Properties of Stainless Steel 316L Vertical Struts Manufactured by Laser Powder Bed Fusion Process10.1016/j.msea.2018.08.069 ↗
14. Bregoli, C., Buccino, F., Picca, F., Bagherifard, S., Biffi, C., Tuissi, A., and Vergani, L. (2023). Additive Manufacturing of AISI 316L Specimens with Distributed Inner Bone-Type Cavities: Processability and Characterization, IOP Publishing.10.1088/1757-899X/1275/1/012001 ↗
15. Daniel, S.A., and Suya Prem Anand, P. (2025). A Review on the Utilization of SS 316L Lattice Structures for Orthopaedics Developed by the Laser Powder Bed Fusion Process. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng.10.1177/09544089251317120 ↗
16. High-Power Laser Powder Bed Fusion of 316L Stainless Steel: Defects, Microstructure, and Mechanical Properties10.1016/j.jmapro.2022.08.066 ↗
17. Crystallographic Texture-and Grain Boundary Density-Independent Improvement of Corrosion Resistance in Austenitic 316L Stainless Steel Fabricated via Laser Powder Bed Fusion
18. Creep and Creep Damage Behavior of Stainless Steel 316L Manufactured by Laser Powder Bed Fusion10.1016/j.msea.2021.142223 ↗
19. Additively Manufactured 316L Stainless Steel with Improved Corrosion Resistance and Biological Response for Biomedical Applications
20. Bio-Functional and Anti-Corrosive 3D Printing 316L Stainless Steel Fabricated by Selective Laser Melting10.1016/j.matdes.2018.04.058 ↗
21. Mechanical and Degradation Behavior of Three Fe-Mn-C Alloys for Potential Biomedical Applications10.1016/j.mtcomm.2021.102250 ↗
22. Siddiqui, M.A.S., Mia, M.P., Hossain, M.A.K., Rabbi, M.d.S., Butt, H., and Alam, F. (2025). Recent Advances in Crystalline Architecture and Defect Engineering of 3D-Printed Metals for Biomedical Breakthroughs: A Comprehensive Review. Adv. Eng. Mater., 2500257.10.1002/adem.202500257 ↗
23. Effects of Cr on Pitting Corrosion Resistance and Passive Film Properties of Austenitic Fe–19Mn–12Al–1.5 C Lightweight Steel10.1016/j.corsci.2022.110529 ↗
24. Cell–Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release10.1021/acsami.1c21901 ↗
25. Improving Biocompatibility for next Generation of Metallic Implants10.1016/j.pmatsci.2022.101053 ↗
26. Optimization of Surface Roughness and Dimensional Accuracy in LPBF Additive Manufacturing10.1016/j.optlastec.2021.107246 ↗
27. 316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting10.1007/s11665-009-9535-2 ↗
28. Wang, S., Liu, Y., Shi, W., Qi, B., Yang, J., Zhang, F., Han, D., and Ma, Y. (2017). Research on High Layer Thickness Fabricated of 316L by Selective Laser Melting. Materials, 10.10.3390/ma10091055 ↗
29. Mechanical Behavior of Selective Laser Melted 316L Stainless Steel10.1016/j.msea.2017.04.058 ↗
30. Densification Behavior of Gas and Water Atomized 316L Stainless Steel Powder During Selective Laser Melting10.1016/j.apsusc.2010.02.030 ↗
31. Additive Manufacturing of Lithium Aluminosilicate Glass-Ceramic/Metal 3D Electronic Components via Multiple Material Laser Powder Bed Fusion
32. Zhang, Z., Jiang, C., and Lu, M. (2025). Fusion of Sentiment and Market Signals for Bitcoin Forecasting: A SentiStack Network Based on a Stacking LSTM Architecture. Big Data Cogn. Comput., 9.10.3390/bdcc9060161 ↗
33. Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses10.1016/j.compositesb.2025.112154 ↗
34. Wei, C., Gu, H., Zhang, Z., Chueh, Y.-H., and Li, L. (2023). Laser and Arc-Based Methods for Additive Manufacturing of Multiple Material Components—From Design to Manufacture. Additive Manufacturing Technology, John Wiley & Sons, Ltd.10.1002/9783527833931.ch4_1 ↗
35. Towards a New Avenue for Rapid Synthesis of Electrocatalytic Electrodes via Laser-Induced Hydrothermal Reaction for Water Splitting10.1088/2631-7990/ad038f ↗
36. Understanding Factors Affecting the Process Efficiency, Quality and Carbon Emission in Laser Drilling of CFRP Composite via Tailored Sequence Multiple-Ring Scanning10.1016/j.compositesb.2023.111156 ↗
37. Effect of Focal Spot Size on AlSi10Mg Alloy Parts Fabricated by Laser Powder Bed Fusion: Process Window, Mechanical Properties, and Microstructure10.1016/j.jallcom.2023.173338 ↗
38. Effects of Processing Parameters on Tensile Properties of Selective Laser Melted 304 Stainless Steel10.1016/j.matdes.2013.03.056 ↗
39. 316L Stainless Steel Designed to Withstand Intermediate Temperature10.1016/j.matdes.2017.08.072 ↗
40. Effect of Build Orientation on the Surface Quality, Microstructure and Mechanical Properties of Selective Laser Melting 316L Stainless Steel10.1108/RPJ-04-2016-0068 ↗
41. (2021, December 31). Metallic materials-Tensile Testing—Part 1: Method of Test at Room Temperature. Available online: www.chinesestandard.net/PDF-EN/GBT228.1-2021EN-P13P-H10896H-276353.pdf.
42. Barrionuevo, G.O., Walczak, M., Mendez, P., La Fé-Perdomo, I., Chiluisa-Palomo, E., Navas-Pinto, W., and Cree, D.E. (2025). Effect of Porosity on Tribological Properties of Medical-Grade 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion. Materials, 18.10.3390/ma18030568 ↗
43. Rapid Fabrication of Bulk-Form TiB2/316L Stainless Steel Nanocomposites with Novel Reinforcement Architecture and Improved Performance by Selective Laser Melting10.1016/j.jallcom.2016.04.156 ↗
44. On the Characterization of Stainless Steel 316L Parts Produced by Selective Laser Melting10.1007/s00170-017-1303-0 ↗
45. Investigation of Crystal Growth Mechanism During Selective Laser Melting and Mechanical Property Characterization of 316L Stainless Steel Parts10.1016/j.matdes.2016.03.111 ↗
46. Failure Analysis of a 316L Stainless Steel Femoral Orthopedic Implant10.1016/j.csefa.2015.12.001 ↗
47. Szwajka, K., Zielińska-Szwajka, J., and Trzepieciński, T. (2023). Improving the Surface Integrity of 316L Steel in the Context of Bioimplant Applications. Materials, 16.10.3390/ma16093460 ↗
48. Effects of Simulated Inflammation on the Corrosion of 316L Stainless Steel10.1016/j.msec.2016.10.012 ↗
49. Comparison of the Properties of Additively Manufactured 316L Stainless Steel for Orthopedic Applications: A Review10.1142/S281092282230001X ↗
50. Qiu, C., Kindi, M.A., Aladawi, A.S., and Hatmi, I.A. (2018). A Comprehensive Study on Microstructure and Tensile Behaviour of a Selectively Laser Melted Stainless Steel. Sci. Rep., 8.10.1038/s41598-018-26136-7 ↗
51. A Comparison on Metallurgical Behaviors of 316L Stainless Steel by Selective Laser Melting and Laser Cladding Deposition10.1016/j.msea.2016.12.112 ↗
52. Intragranular Cellular Segregation Network Structure Strengthening 316L Stainless Steel Prepared by Selective Laser Melting10.1016/j.jnucmat.2015.12.034 ↗
53. Numerical and Experimental Investigation into the Subsequent Thermal Cycling During Selective Laser Melting of Multi-Layer 316L Stainless Steel10.1016/j.optlastec.2017.07.034 ↗
54. Comparison of Vacuum Sintered and Selective Laser Melted Steel AISI 316L10.1515/amm-2017-0314 ↗
55. Effects of Scanning Speed on In Vitro Biocompatibility of 316L Stainless Steel Parts Elaborated by Selective Laser Melting10.1007/s00170-017-0525-5 ↗
56. The Johnson-Mehl-Avrami-Kohnogorov Model: A Brief Review10.1007/BF03185527 ↗
57. A Systematic Review of the Contribution of Additive Manufacturing Toward Orthopedic Applications10.1021/acsomega.4c04870 ↗
58. Zhang, Z., Mativenga, P., Zhang, W., and Huang, S. (2024). Deep Learning-Driven Prediction of Mechanical Properties of 316L Stainless Steel Metallographic by Laser Powder Bed Fusion. Micromachines, 15.10.3390/mi15091167 ↗
59. Comparison of Microstructure and Mechanical Properties of 316 L Austenitic Steel Processed by Selective Laser Melting with Hot-Isostatic Pressed and Cast Material10.1016/j.msea.2016.10.012 ↗
60. Tensile Properties of SS316L Produced by LPBF: Influence of Specimen Dimensions and Surface Condition10.1016/j.matchar.2023.113117 ↗
61. The Impact of Energy Density and Process Parameters on the Distribution of Residual Stresses in Additively Manufactured Stainless Steel 316 L10.1007/s00339-024-07638-w ↗
62. Fatigue Characteristics of Metallic Biomaterials10.1016/j.ijfatigue.2006.09.021 ↗
63. Biomechanical Characterization of Failure the 316L Stainless Steel for Femoral Compression Plates
64. Eliaz, N. (2019). Corrosion of Metallic Biomaterials: A Review. Materials, 12.10.3390/ma12030407 ↗
65. Zhang, Z., Wang, Y., and Wang, W. (2025). Machine Learning in Gel-Based Additive Manufacturing: From Material Design to Process Optimization. Gels., 11.10.3390/gels11080582 ↗
66. An Assessment of Ultra Fine Grained 316L Stainless Steel for Implant Applications10.1016/j.actbio.2015.10.043 ↗