The Influence of Printing Orientation on the Properties of 3D-Printed Polymeric Provisional Dental Restorations: A Systematic Review and Meta-Analysis
Source abstract
Abstract
Three-dimensional printing is commonly used to fabricate provisional dental restorations. Studies have reported that changes in printing orientation affect the physical and mechanical properties of 3D-printed polymeric provisional restorations; however the findings have been inconsistent. Therefore, this systematic review and meta-analysis aims to analyze the articles evaluating the influence of printing orientation on the physical and mechanical properties of 3D-printed polymeric provisional dental restorations. Recommendations provided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed to structure and compose the review. The PICO (Participant, Intervention, Comparison, Outcome) question ordered was: ‘Do 3D-printed provisional dental restorations (P) printed at various orientations (except 0°) (I) exhibit similar physical and mechanical properties (O) when compared to those printed at a 0° orientation (C)?’. An electronic search was conducted on 28 and 29 April 2025, by two independent researchers across four databases (MEDLINE/PubMed, Scopus, Cochrane Library, and Web of Science) to systematically collect relevant articles published up to March 2025. After removing duplicate articles and applying predefined inclusion and exclusion criteria, twenty-one articles were incorporated into this review. Self-designed Performa’s were used to tabulate all relevant information. For the quality analysis, the modified CONSORT scale was utilized. The quantitative analysis was performed on only fifteen out of twenty-one articles. It can be concluded that the printing orientation affects some of the tested properties, which include fracture strength (significantly higher for specimens printed at 0° when compared to 90°), wear resistance (significantly higher for specimens printed at 90° when compared to 0°), microhardness (significantly higher for specimens printed at 90°and 45° when compared to 0°), color stability (high at 0°), and surface roughness (significantly higher for specimens printed at 45° and 90° when compared to 0°). There were varied outcomes in terms of flexural strength and elastic modulus.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam 31441, Saudi Arabia
References (92)
Show source-provided references
1. Interim restorations10.1016/j.cden.2003.12.007 ↗
2. Crowns and other extra-coronal restorations: Provisional restorations10.1038/sj.bdj.4801443 ↗
3. Long-term esthetic provisional restorations in dentistry
4. Fabrication of a fixed provisional restoration utilizing a light-curing acrylic resin
5. Computer-aided technology for fabricating complete dentures: Systematic review of historical background, current status, and future perspectives10.1016/S0022-3913(13)60318-2 ↗
6. Digital Technologies for Restorative Dentistry10.1016/j.cden.2022.05.006 ↗
7. Recent Advances in Intraoral Scanners10.1177/00220345241271937 ↗
8. Jain, S., Sayed, M.E., Ibraheem, W.I., Ageeli, A.A., Gandhi, S., Jokhadar, H.F., AlResayes, S.S., Alqarni, H., Alshehri, A.H., and Huthan, H.M. (2024). Accuracy Comparison between Robot-Assisted Dental Implant Placement and Static/Dynamic Computer-Assisted Implant Surgery: A Systematic Review and Meta-Analysis of In Vitro Studies. Medicina, 60.10.3390/medicina60010011 ↗
9. Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations10.1016/j.prosdent.2019.05.034 ↗
10. Digital dentistry: An overview of recent developments for CAD/CAM generated restorations10.1038/sj.bdj.2008.350 ↗
11. 3D Printing in dentistry-state of the art10.2341/18-229-L ↗
12. 3D printing parameters, supporting structures, slicing, and post-processing procedures of vat-polymerization additive manufacturing technologies: A narrative review10.1016/j.jdent.2021.103630 ↗
13. Additive Manufacturing in Dentistry: Current Technologies, Clinical Applications, and Limitations10.1007/s40496-020-00288-w ↗
14. Emerging 3D printing based on polymers and nanomaterial additives: Enhancement of properties and potential applications10.1016/j.eurpolymj.2022.111806 ↗
15. Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application10.1016/j.dental.2022.09.006 ↗
16. Additive manufacturing for complete denture fabrication: A narrative review10.1111/jopr.13426 ↗
17. Prpic, V., Spehar, F., Stajdohar, D., Bjelica, R., Cimic, S., and Par, M. (2023). Mechanical Properties of 3D-Printed Occlusal Splint Materials. Dent. J., 11.10.3390/dj11080199 ↗
18. 3D-printed resins for provisional dental restorations: Comparison of mechanical and biological properties10.1111/jerd.12888 ↗
19. Influence of print orientation on the intaglio surface accuracy (trueness and precision) of tilting stereolithography definitive resin-ceramic crowns10.1016/j.prosdent.2023.03.020 ↗
20. Jain, S., Sayed, M.E., Shetty, M., Alqahtani, S.M., Al Wadei, M.H.D., Gupta, S.G., Othman, A.A.A., Alshehri, A.H., Alqarni, H., and Mobarki, A.H. (2022). Physical and Mechanical Properties of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis. Polymers, 14.10.3390/polym14132691 ↗
21. Al Wadei, M.H.D., Sayed, M.E., Jain, S., Aggarwal, A., Alqarni, H., Gupta, S.G., Alqahtani, S.M., Alahmari, N.M., Alshehri, A.H., and Jain, M. (2022). Marginal Adaptation and Internal Fit of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM-Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis. Coatings, 12.10.3390/coatings12111777 ↗
22. A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations10.1111/jerd.12438 ↗
23. Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin10.1016/j.dental.2018.09.011 ↗
24. In vitro investigation of the influence of printing direction on the flexural strength, flexural modulus and fractographic analysis of 3D-printed temporary materials10.4012/dmj.2020-147 ↗
25. de Castro, E.F., Nima, G., Rueggeberg, F.A., and Giannini, M. (2022). Effect of build orientation in accuracy, flexural modulus, flexural strength, and microhardness of 3D-Printed resins for provisional restorations. J. Mech. Behav. Biomed. Mater., 136.10.1016/j.jmbbm.2022.105479 ↗
26. The anisotropicity of the flexural properties of an occlusal device material processed by stereolithography10.1016/j.prosdent.2016.03.018 ↗
27. Grzebieluch, W., Kowalewski, P., Grygier, D., Rutkowska-Gorczyca, M., Kozakiewicz, M., and Jurczyszyn, K. (2021). Printable and Machinable Dental Restorative Composites for CAD/CAM Application—Comparison of Mechanical Properties, Fractographic, Texture and Fractal Dimension Analysis. Materials, 14.10.3390/ma14174919 ↗
28. Lu, Y., Wang, L., Dal Piva, A.M.O., Tribst, J.P.M., Nedeljkovic, I., Kleverlaan, C.J., and Feilzer, A.J. (2023). Influence of surface finishing and printing layer orientation on surface roughness and flexural strength of stereolithography-manufactured dental zirconia. J. Mech. Behav. Biomed. Mater., 143.10.1016/j.jmbbm.2023.105944 ↗
29. Khalil, A.S., and Zaher, A.R. (2025). Effect of printing orientation and resin thickness on flexural strength of direct 3D-printed aligners. BMC Oral Health, 25.10.1186/s12903-025-05556-8 ↗
30. Kaushik, A., Garg, R.K., Saini, R.S., Bennardo, F., and Heboyan, A. (2025). Evaluating the effect of printing parameters on the performance of resin occlusal splints for a sustainable dentistry. J. Appl. Biomater. Funct. Mater., 23.10.1177/22808000251333700 ↗
31. Influence of different printing orientations and post-polymerization time on the translucency of three-dimensional (3D) printed denture base resins10.1111/jopr.13866 ↗
32. Dai, J., Li, P., Spintzyk, S., Liu, C., and Xu, S. (2023). Influence of additive manufacturing method and build angle on the accuracy of 3D-printed palatal plates. J. Dent., 132.10.1016/j.jdent.2023.104449 ↗
33. Effect of layer thickness and printing orientation on the color stability and stainability of a 3D-printed resin material10.1016/j.prosdent.2022.01.024 ↗
34. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations10.1016/j.prosdent.2015.12.002 ↗
35. Farkas, A.Z., Galatanu, S.V., and Nagib, R. (2023). The influence of printing layer thickness and orientation on the mechanical properties of DLP 3D-printed dental resin. Polymers, 15.10.3390/polym15051113 ↗
36. Effect of build orientation on the fracture resistance and marginal quality of 3D-printed anatomic provisional crowns: An in-vitro study10.1016/j.sdentj.2024.01.004 ↗
37. Surface roughness and shear bond strength to composite resin of additively manufactured interim restorative material with different printing orientations10.1016/j.prosdent.2021.08.010 ↗
38. Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials10.1016/j.prosdent.2024.08.008 ↗
39. Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials10.1016/j.dental.2024.05.005 ↗
40. Effect of build orientation in gloss, roughness and color of 3D-printed resins for provisional indirect restorations10.1016/j.dental.2023.05.002 ↗
41. Influence of printing orientation on mechanical properties of aged 3D-printed restorative resins10.1016/j.dental.2024.02.023 ↗
42. Alkhateeb, R.I., Algaoud, H.S., Aldamanhori, R.B., Alshubaili, R.R., Alalawi, H., and Gad, M.M. (2023). Fracture Load of 3D-Printed Interim Three-Unit Fixed Dental Prostheses: Impact of Printing Orientation and Post-Curing Time. Polymers, 15.10.3390/polym15071737 ↗
43. Effect of the Printing Angle on Flexural Strength, Microhardness, and Surface Roughness of Three-Dimensionally Printed Resin for Provisional Restorations
44. The influence of printing angle on color and translucency of 3D printed resins for dental restorations10.1016/j.dental.2023.03.011 ↗
45. Lee, H., Son, K., Lee, D.-H., Kim, S.-Y., and Lee, K.-B. (2022). Comparison of Wear of Interim Crowns in Accordance with the Build Angle of Digital Light Processing 3D Printing: A Preliminary In Vivo Study. Bioengineering, 9.10.21203/rs.3.rs-1644127/v1 ↗
46. Wear Resistance of Additively Manufactured Resin with Different Printing Parameters and Postpolymerization Conditions10.11607/ijp.8538 ↗
47. Derban, P., Negrea, R., Rominu, M., and Marsavina, L. (2021). Influence of the Printing Angle and Load Direction on Flexure Strength in 3D Printed Materials for Provisional Dental Restorations. Materials, 14.10.3390/ma14123376 ↗
48. Casucci, A., Verniani, G., Sami Haichal, W., Manfredini, D., Ferrari, M., and Ferrari Cagidiaco, E. (2024). Influence of Printing Angulation on the Flexural Strength of 3D Printed Resins: An In Vitro Study. Appl. Sci., 14.10.3390/app142110067 ↗
49. Influence of build angle, printing layer thickness and aging on the flexural strength, precision, roughness and porosity analysis of a printed resin for provisional restorations10.1007/s10266-025-01060-1 ↗
50. Kaiahara, F.H., Pizi, E.C.G., Straioto, F.G., Galvani, L.D., Kuga, M.C., Arrué, T.A., Junior, A.R., Só, M.V.R., Pereira, J.R., and Vidotti, H. (2025). Influence of Printing Orientation on the Mechanical Properties of Provisional Polymeric Materials Produced by 3D Printing. Polymers, 17.10.3390/polym17030265 ↗
51. Comparison of surface roughness of additively manufactured implant-supported interim crowns fabricated with different print orientations10.1111/jopr.13645 ↗
52. The PRISMA 2020 statement: An updated guideline for reporting systematic reviews10.1136/bmj.n71 ↗
53. Does Build Angle Have an Influence on the Surface Roughness of Anterior 3D-Printed Restorations? An In Vitro Study Int10.11607/ijp.7100 ↗
54. Guidelines for reporting pre-clinical in vitro studies on dental materials10.1016/j.jebdp.2012.10.001 ↗
55. CRIS guidelines (checklist for reporting in-vitro studies): A concept note on the need for standardized guidelines for improving quality and transparency in reporting in-vitro studies in experimental dental research10.4103/0972-0707.136338 ↗
56. RevMan ((RevMan) The Cochrane Collaboration, 2020). (RevMan) The Cochrane Collaboration, Version 541.
57. Effect of print orientation and duration of ultraviolet curing on the dimensional accuracy of a 3-dimensionally printed orthodontic clear aligner design10.1016/j.ajodo.2020.03.023 ↗
58. Influence of print orientation and wet-dry storage time on the intaglio accuracy of additively manufactured occlusal devices10.1016/j.prosdent.2022.12.005 ↗
59. The impact of print orientation and graphene nanoplatelets on biaxial flexural strength and cytotoxicity of a 3D printable resin for occlusal splints10.1016/j.dental.2024.07.031 ↗
60. Accuracy of occlusal splints printed in different orientations by liquid crystal display technology: An in vitro study10.1016/j.jdent.2024.105461 ↗
61. Influence of build angulation on the mechanical properties of a direct-metal laser-sintered cobalt-chromium used for removable partial denture frameworks10.1016/j.prosdent.2020.06.014 ↗
62. Effects of layer thickness and build angle on the microbial adhesion of denture base polymers manufactured by digital light processing10.2186/jpr.JPR_D_22_00126 ↗
63. Evaluation of the Influence of Build Orientation on the Surface Roughness and Flexural Strength of 3D-Printed Denture Base Resin and Its Comparison with CAD-CAM Milled Denture Base Resin10.1055/s-0043-1768972 ↗
64. Turanoglu, O.F., Cevlik, E.T., and Vural, C. (2024). Investigation of adhesion status of Candida species to the surface of resin materials produced at different angles with additive manufacturing. BMC Oral Health, 24.10.1186/s12903-024-04505-1 ↗
65. Effect of build orientation on the wear resistance and hardness of denture teeth fabricated using digital light processing: An in vitro study10.2186/jpr.JPR_D_24_00111 ↗
66. Effects of orientation and post processing on the bonding of 3-dimensional printed brackets to printable permanent crown resin10.1016/j.ajodo.2024.11.009 ↗
67. The impact of print orientation on the fracture resistance and failure patterns of additively manufactured cobalt-chromium post and cores10.1111/jopr.13762 ↗
68. A review study on the effect of printing parameters of fused deposition modelling (fdm) metal polymer composite parts on mechanical properties and surface roughness
69. Influence of 3D printing orientations on physico-mechanical properties and accuracy of additively manufactured dental ceramics10.2186/jpr.JPR_D_24_00092 ↗
70. Assessment of the trueness of additively manufactured mol3% zirconia crowns at different printing orientations with an industrial and desktop 3D printer compared to subtractive manufacturing10.1016/j.jdent.2024.104942 ↗
71. Zirconia crowns manufactured using digital light processing: Effects of build angle and layer thickness on the accuracy10.1016/j.jdent.2024.105359 ↗
72. Trueness of 3D printed partial denture frameworks: Build orientations and support structure density parameters10.4047/jap.2022.14.3.150 ↗
73. Effect of Horizontal Resolution of Printer on Trueness of 3D-Printed Provisional Crown: An In Vitro Study10.1055/s-0043-1764478 ↗
74. Trueness assessment of additively manufactured maxillary complete denture bases produced at different orientations10.1016/j.prosdent.2021.12.025 ↗
75. Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology10.11607/ijp.4835 ↗
76. Effects of build orientation and bar addition on accuracy of complete denture base fabricated with digital light projection: An in vitro study10.2186/jpr.JPR_D_22_00245 ↗
77. Build Angle: Does It Influence the Accuracy of 3D-Printed Dental Restorations Using Digital Light-Processing Technology?10.11607/ijp.5117 ↗
78. Use of the GRADE approach in systematic reviews and guidelines10.1016/j.bja.2019.08.015 ↗
79. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
80. Changes in flexural properties of composite restoratives after aging in water
81. Effect of printing orientation on the fracture strength of additively manufactured 3-unit interim fixed dental prostheses after aging10.1016/j.jdent.2022.104155 ↗
82. Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: The impact of resin material, build direction, post-curing, and artificial aging—An in vitro study10.1007/s00784-019-02952-7 ↗
83. Effect of 3D printing direction and water storage on nano-mechanical properties of 3D printed and auto-polymerized polymer with special emphasis on printing layer interface10.1166/mex.2019.1502 ↗
84. 3D printing and post-curing optimization of photopolymerized structures: Basic concepts and effective tools for improved thermomechanical properties10.1016/j.polymertesting.2022.107499 ↗
85. Shear punch strength and flexural strength of model composites with varying filler volume fraction, particle size and silanation10.1016/S0109-5641(02)00031-3 ↗
86. Monomers used in resin composites: Degree of conversion, mechanical properties and water sorption/solubility10.1590/S0103-64402012000500007 ↗
87. Kowalska, A., Sokolowski, J., and Bociong, K. (2021). The photoinitiators used in resin based dental composite—A review and future perspectives. Polymers, 13.10.3390/polym13030470 ↗
88. Comparison of Flexural Strength of Three-Dimensional Printed Three-Unit Provisional Fixed Dental Prostheses according to Build Directions
89. Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An in vitro study10.1016/j.prosdent.2020.02.008 ↗
90. Effect of print layer height on the assessment of 3D-printed models10.1016/j.ajodo.2019.02.013 ↗
91. 3D printed versus conventionally cured provisional crown and bridge dental materials10.1016/j.dental.2017.10.003 ↗
92. A meta-analysis of the mechanical properties of ice-templated ceramics and metals10.1088/1468-6996/16/4/043501 ↗