journal article·2025-05-14Open access

A Comprehensive Literature Review of Total Hip Arthroplasty (THA): Part 1—Biomaterials

Chiara Morano, Salvatore Garofalo, Paolo Bertuccio, Agata Sposato, Irene Zappone, Leonardo Pagnotta

Abstract

The rapid advancement of materials science has revolutionized total hip arthroplasty (THA), a critical orthopedic procedure aimed at restoring mobility and improving patient quality of life. This review investigates the evolution of biomaterials used in THA, analyzing their mechanical, biological, and chemical properties. The study outlines the transition from early natural materials to modern metals, polymers, and ceramics, highlighting their benefits and limitations in clinical applications. Particular emphasis is placed on the development of advanced materials such as highly cross-linked polyethylene (HXLPE), zirconia-toughened alumina (ZTA), and tantalum alloys (Ta), which demonstrate enhanced biocompatibility, wear resistance, and longevity. By examining emerging trends, including bioactive coatings and nanotechnology, this paper aims to provide a comprehensive understanding of current challenges and future directions in material selection for hip prostheses, ultimately aiming to minimize annual revision rates and improve long-term outcomes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Total Knee Arthroplasty Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical, Energy and Management Engineering, University of Calabria, Via P. Bucci 44C, 87036 Rende, Italy

Funding

Next Generation EU · Project FAIR: Future AI Research

References (100+)

Show source-provided references
1. Total Hip Arthroplasty—Over 100 Years of Operative History
2. Total Hip Arthroplasty
4. A Systematic Review of the Causes of Failure of Revision Total Hip Arthroplasty10.1016/j.jor.2019.04.011 ↗
5. How Long Does a Hip Replacement Last? A Systematic Review and Meta-Analysis of Case Series and National Registry Reports with More than 15 Years of Follow-Up10.1016/S0140-6736(18)31665-9 ↗
6. Early Attempts at Hip Arthroplasty—1700s to 1950s
7. Chronology of Total Hip Joint Replacement and Materials Development
8. Biomaterials and Biocompatibility
9. Comprehensive Review on Biomaterials and Their Inherent Behaviors for Hip Repair Applications10.1021/acsabm.3c00327 ↗
10. Savin, L., Pinteala, T., Mihai, D.N., Mihailescu, D., Miu, S.S., Sirbu, M.T., Veliceasa, B., Popescu, D.C., Sirbu, P.D., and Forna, N. (2023). Updates on Biomaterials Used in Total Hip Arthroplasty (THA). Polymers, 15.10.3390/polym15153278 ↗
11. Zorzi, A., Toumi, H., and Lespessailles, E. (2023). Biomaterials in Total Joint Arthroplasty. Arthroplasty—Advanced Techniques and Future Perspectives, IntechOpen.10.5772/intechopen.102234 ↗
12. On the Design Evolution of Hip Implants: A Review10.1016/j.matdes.2022.110552 ↗
13. Soliman, M.M., Chowdhury, M.E.H., Islam, M.T., Musharavati, F., Nabil, M., Hafizh, M., Khandakar, A., Mahmud, S., Nezhad, E.Z., and Shuzan, M.N.I. (2022). A Review of Biomaterials and Associated Performance Metrics Analysis in Pre-Clinical Finite Element Model and in Implementation Stages for Total Hip Implant System. Polymers, 14.10.3390/polym14204308 ↗
14. Comparative Investigation and Analysis of Hip Prosthesis for Different Bio-Compatible Alloys10.1016/j.matpr.2020.11.222 ↗
15. Development of Biomaterial for Total Hip Joint Replacement10.1088/1757-899X/377/1/012177 ↗
16. An Assessment of Biomaterials for Hip Joint Replacement10.4314/ijest.v13i1.4S ↗
17. Merola, M., and Affatato, S. (2019). Materials for Hip Prostheses: A Review of Wear and Loading Considerations. Materials, 12.10.3390/ma12030495 ↗
18. Kenney, S., and Garner, C. (2021). Mechanical Properties of Biomaterials Used in Total Hip and Knee Arthroplasty, University of Oklahoma.10.15763/11244/330101 ↗
19. Hu, C.Y., and Yoon, T.-R. (2018). Recent Updates for Biomaterials Used in Total Hip Arthroplasty. Biomater. Res., 22.10.1186/s40824-018-0144-8 ↗
20. Biomaterials for Hip Implants—Important Considerations Relating to the Choice of Materials10.1515/bams-2017-0017 ↗
21. Khanna, R., Ong, J., Oral, E., and Narayan, R. (2017). Progress in Wear Resistant Materials for Total Hip Arthroplasty. Coatings, 7.10.3390/coatings7070099 ↗
22. Biomaterials in Hip Joint Replacement
23. Department of Mechanical Engineering, Malaviya National Institute of Technology, Malaviya Nagar, JLN Marg, Jaipur, Rajasthan-302017, India Current and Future Biocompatibility Aspects of Biomaterials for Hip Prosthesis10.3934/bioeng.2016.1.23 ↗
24. Affatato, S. (2014). The History of Biomaterials Used in Total Hip Arthroplasty (THA). Perspectives in Total Hip Arthroplasty, Elsevier.10.1533/9781782420392.1.19 ↗
25. Biomaterials in Total Joint Replacement10.1016/j.colsurfb.2003.12.002 ↗
26. McTighe, T., Brazil, D., and Bruce, W. (2015). Metallic Alloys in Total Hip Arthroplasty, Data Trace Publishing Company.
27. New Materials for Hip and Knee Joint Replacement: What’s Hip and What’s in Kneed?10.1002/jor.24750 ↗
28. Alternative Materials to Improve Total Hip Replacement Tribology
29. Stainless Steel Femoral Heads Reduce Rate of Revision When Compared to Ion-Implanted Chromium-Cobalt Heads With a Single Cemented Femoral Design: An Analysis of 40,468 Total Hip Replacements From the Australian Orthopedic Association National Joint Replacement Registry10.1016/j.arth.2021.08.024 ↗
30. Lifespan Enhancement of Stainless Steel 316L Artificial Hip Prosthesis by Novel Ti-6Al-4V-2ZrC Coating
31. Aherwar, A., Singh, A.K., and Patnaik, A. (2016). Cobalt Based Alloy: A Better Choice Biomaterial for Hip Implants. Trends Biomater. Artif. Organs, 30.
32. Outcome Analysis of Various Bearing Surface Materials Used in Total Hip Replacement10.1166/mex.2020.1651 ↗
33. Eltit, F., Wang, Q., and Wang, R. (2019). Mechanisms of Adverse Local Tissue Reactions to Hip Implants. Front. Bioeng. Biotechnol., 7.10.3389/fbioe.2019.00176 ↗
34. Materials selection for hip prosthesis by the method of weighted properties10.11113/jt.v75.5291 ↗
35. Titanium Alloys for Hip Joint Replacements10.1016/0267-6605(87)90015-1 ↗
36. Titanium Alloys in Total Joint Replacement—A Materials Science Perspective10.1016/S0142-9612(97)00146-4 ↗
37. Current Methods of Preventing Aseptic Loosening and Improving Osseointegration of Titanium Implants in Cementless Total Hip Arthroplasty: A Review10.1177/0300060517732697 ↗
38. Good Performance of a Titanium Femoral Component in Cementless Hip Arthroplasty in Younger Patients97 Arthroplasties Followed for 5–11 Years10.1080/00016470310017668 ↗
39. Poitout, D.G. (2016). Biomechanics and Biomaterials in Orthopedics, Springer.10.1007/978-1-84882-664-9 ↗
40. Long-Term Performance of Oxidized Zirconium on Conventional and Highly Cross-Linked Polyethylene in Total Hip Arthroplasty10.1051/sicotj/2020010 ↗
41. Five-Year Comparison of Oxidized Zirconium and Cobalt-Chromium Femoral Components in Total Knee Arthroplasty: A Randomized Controlled Trial10.2106/JBJS.I.01753 ↗
42. Applications of Porous Tantalum in Total Hip Arthroplasty10.5435/00124635-200611000-00008 ↗
43. 20 Years of Porous Tantalum in Primary and Revision Hip Arthroplasty—Time for a Critical Appraisal10.1080/17453674.2018.1463007 ↗
44. Tantalum versus Titanium Acetabular Cups in Primary Total Hip Arthroplasty: Current Concept and a Review of the Current Literature
45. Performance of Porous Tantalum vs. Titanium Cup in Total Hip Arthroplasty: Randomized Trial with Minimum 10-Year Follow-Up10.1016/j.arth.2015.01.013 ↗
46. Huang, G., Pan, S.-T., and Qiu, J.-X. (2021). The Clinical Application of Porous Tantalum and Its New Development for Bone Tissue Engineering. Materials, 14.10.20944/preprints202104.0348.v1 ↗
47. Future Bearing Surfaces in Total Hip Arthroplasty10.4055/cios.2014.6.1.110 ↗
48. Newly Developed Ti–Nb–Zr–Ta–Si–Fe Biomedical Beta Titanium Alloys with Increased Strength and Enhanced Biocompatibility10.1016/j.msec.2015.11.043 ↗
49. New bearing surfaces in total hip replacement10.1590/S0102-36162012000200002 ↗
50. New Surface-Hardened, Low-Modulus, Corrosion-Resistant Ti-13Nb-13Zr Alloy for Total HIP Arthroplasty
51. Possibility of Total Hip Arthroplasty Using Shape Memory Alloy10.1299/jbse.5.24 ↗
52. A Recent Investigation on Shape Memory Alloys and Polymers Based Materials on Bio Artificial Implants-Hip and Knee Joint10.1016/j.matpr.2020.07.711 ↗
53. Rotsch, C., Kemter-Esser, K., Dohndorf, J., Knothe, M., Drossel, W.-G., and Heyde, C.-E. (2024). Feasibility of a Shape-Memory-Alloy-Actuator System for Modular Acetabular Cups. Bioengineering, 11.10.3390/bioengineering11010075 ↗
54. The Microstructure of Ultra-High Molecular Weight Polyethylene Used in Total Joint Replacements10.1016/S0142-9612(97)00143-9 ↗
55. Novel Polymers for Use in Total Joint Arthroplasty: Improving the Mechanical Properties and Wear Resistance of Polymers Used as Implant Bearing Materials Requires New Approaches and Modern Technology
56. Advanced Biomaterials in Hip Joint Arthroplasty. A Review on Polymer and Ceramics Composites as Alternative Bearings10.1016/j.compositesb.2015.07.019 ↗
57. Bearing Surfaces in Primary Total Hip Arthroplasty10.1302/2058-5241.3.180300 ↗
58. Recent Update on Crosslinked Polyethylene in Total Hip Arthroplasty10.1051/sicotj/2020013 ↗
59. New Biomaterials for Orthopedic Implants
60. Bearing Surfaces in Hip Replacement e Evolution and Likely Future10.1016/j.mjafi.2014.04.015 ↗
61. New Alternate Bearing Surfaces in Total Hip Arthroplasty: A Review of the Current Literature10.1016/j.jcot.2017.10.013 ↗
62. Material Challenges and Opportunities in 3D Printing for Hip Implant Applications10.21926/rpm.2201004 ↗
63. PEEK Radiolucent Plate for Distal Radius Fractures: Multicentre Clinical Results at 12 Months Follow Up10.1016/S0020-1383(17)30655-1 ↗
64. A Review of Carbon Fiber-Reinforced Polymer Composite Used to Solve Stress Shielding in Total Hip Replacement10.3934/matersci.2024023 ↗
65. Kurtz, S.M., and Nevelos, J. (2012). Arthroplasty Bearing Surfaces. PEEK Biomaterials Handbook, Elsevier.10.1016/B978-1-4377-4463-7.10016-8 ↗
66. Polymer-Based Composite Hip Prostheses10.1016/S0162-0134(99)00228-7 ↗
67. Updates in Biomaterials of Bearing Surfaces in Total Hip Arthroplasty10.1186/s42836-021-00092-6 ↗
68. Polymers as Bearing Materials for Total Hip Replacement: A Friction and Wear Analysis10.1002/jbm.820030402 ↗
69. Effects of Moisture Conditioning Methods on Mechanical Properties of Injection Molded Nylon 610.1177/0731684404030730 ↗
70. Theories of Wear and Loosening in Hip Prostheses: Wear-Induced Loosening vs Loosening-Induced Wear–a Review10.3109/17453679408995473 ↗
71. Hylamer vs Conventional Polyethylene in Primary Total Hip Arthroplasty: A Long-Term Case-Control Study of Wear Rates and Osteolysis10.1016/j.arth.2009.02.006 ↗
72. Dual Mobility in Total Hip Arthroplasty: Biomechanics, Indications and Complications–Current Concepts10.1007/s43465-021-00471-w ↗
73. Afghanyar, Y., Joser, S., Tecle, J., Drees, P., Dargel, J., Rehbein, P., and Kutzner, K.P. (2021). The Concept of a Cementless Isoelastic Monoblock Cup Made of Highly Cross-Linked Polyethylene Infused with Vitamin E: Radiological Analyses of Migration and Wear Using EBRA and Clinical Outcomes at Mid-Term Follow-Up 2020. BMC Musculoskelet. Disord., 22.10.1186/s12891-021-03981-8 ↗
74. Strength and Reliability of Alumina Ceramic Femoral Heads: Review of Design, Testing, and Retrieval Analysis10.1016/j.jmbbm.2010.12.010 ↗
75. Long-Term Outcome of Primary Total Hip Arthroplasty with Cementless Bioactive Glass Ceramic Bottom-Coated Implants and Highly Cross-Linked Polyethylene: A Minimum 10-Year Analysis10.1016/j.jos.2021.12.019 ↗
76. Ceramic-on-Ceramic Total Hip Arthroplasty: Update10.1016/j.arth.2008.06.003 ↗
77. Ten-Year Survival of Ceramic-on-Ceramic Total Hip Arthroplasty in Patients Younger than 60 Years: A Systematic Review and Meta-Analysis10.1186/s13018-021-02828-1 ↗
78. Revision of Ceramic Hip Replacements for Fracture of a Ceramic Component: AAOS Exhibit Selection10.2106/JBJS.K.00589 ↗
79. Bioactive Glasses for Nonbearing Applications in Total Joint Replacement10.1053/j.sart.2006.09.003 ↗
80. Good Short-Term Outcome of Primary Total Hip Arthroplasty with Cementless Bioactive Glass Ceramic Bottom-Coated Implants: 109 Hips Followed for 3–9 Years10.3109/17453674.2012.736173 ↗
81. In Revision Hip Arthroplasty, the Use of Ceramics as Bone Substitutes
82. Ceramic Materials as Bearing Surfaces for Total Hip Arthroplasty10.5435/00124635-200902000-00002 ↗
83. Gene Activation by Bioactive Glasses10.1007/s10856-006-0435-9 ↗
84. Davim, J.P. (2013). Polymer Composites for Cemented Total Hip Replacements. Biomedical Composites, DE GRUYTER.10.1515/9783110267488 ↗
85. Design of a Biomimetic Polymer-composite Hip Prosthesis10.1002/jbm.a.31146 ↗
86. Design of a Polymeric Composite Material Femoral Stem for Hip Joint Implant10.1590/0104-1428.02119 ↗
87. Design and Analysis of Hip Prosthesis Using Functionally Graded Material
88. Design and Analysis of Cementless Hip-Joint System Using Functionally Graded Material10.24425/ame.2021.139804 ↗
89. The Relative Merits of Cemented and Uncemented Prostheses in Total Hip Arthroplasty10.4103/ortho.IJOrtho_405_16 ↗
90. Modern Use of Modern Cement for Total Hip Replacement10.1016/S0030-5898(20)32263-X ↗
91. Robu, A., Ciocoiu, R., Antoniac, A., Antoniac, I., Raiciu, A.D., Dura, H., Forna, N., Cristea, M.B., and Carstoc, I.D. (2022). Bone Cements Used for Hip Prosthesis Fixation: The Influence of the Handling Procedures on Functional Properties Observed during In Vitro Study. Materials, 15.10.3390/ma15092967 ↗
92. Cemented Total Hip Arthroplasty: The SP-II Femoral Component
93. Bioactive Strong Biodegradable Bone Cement for Rapid Osteointegration and Osteogenesis10.1016/j.cej.2023.145609 ↗
94. Liu, D., Cui, C., Chen, W., Shi, J., Li, B., and Chen, S. (2023). Biodegradable Cements for Bone Regeneration. J. Funct. Biomater., 14.10.3390/jfb14030134 ↗
95. Cementation in Total Hip Arthroplasty: History, Principles, and Technique10.1530/EOR-22-0002 ↗
96. Modern British Cemented Total Hip Replacement10.4172/2167-7921.1000e114 ↗
97. Comparisons of Different Bearing Surfaces in Cementless Total Hip Arthroplasty: A Systematic Review and Bayesian Network Analysis10.1016/j.arth.2022.10.016 ↗
98. Kothiyal, G.P., Arun, S., Rama Sreekanth, P.S., and Kanagaraj, S. (2016). Biomaterials in Total Hip Joint Replacements: The Evolution of Basic Concepts, Trends, and Current Limitations—A Review. Trends in Biomaterials, Jenny Stanford Publishing.10.1201/b19906-7 ↗
99. The Choice between Hip Prosthetic Bearing Surfaces in Total Hip Replacement: A Protocol for a Systematic Review and Network Meta-Analysis10.1186/s13643-016-0189-5 ↗
100. Solarino, G., Spinarelli, A., Virgilio, A., Simone, F., Baglioni, M., and Moretti, B. (2021). Outcomes of Ceramic Composite in Total Hip Replacement Bearings: A Single-Center Series. J. Compos. Sci., 5.10.3390/jcs5120320 ↗