journal article·2025-02-09Open access

Hybrid Biomechanical Design of Dental Implants: Integrating Solid and Gyroid Triply Periodic Minimal Surface Lattice Architectures for Optimized Stress Distribution

Dawit Bogale Alemayehu, Masahiro Todoh, Song-Jeng Huang

Abstract

Background: Dental implantology has evolved significantly since the introduction of additive manufacturing, which allows for the reproduction of natural bone’s porous architecture to improve bone tissue compatibility and address stress distribution issues important to long-term implant success. Conventional solid dental implants frequently cause stress shielding, which compromises osseointegration and reduces durability. Aim: The current research proposes to examine the biomechanical efficacy of fully and hybrid gyroid triply periodic minimum surface (TPMS) latticed implants across different cell sizes to optimize stress distribution and improve implant durability. Methods: This study evaluates six fully and hybrid gyroid (TPMS) latticed implants, including fully latticed designs with three cell sizes—FLI_111 (1 mm × 1 mm × 1 mm), FLI_222 (2 mm × 2 mm × 2 mm), and FLI_333 (3 mm × 3 mm × 3 mm)—and hybrid gyroid TPMS latticed implants with solid necks in corresponding sizes—HI_111, HI_222, and HI_333. To enhance initial stability, a square-threaded design was added into the bottom part of both fully and hybrid lattice implants. The designs also incorporate anti-rotational connections to enhance fixation, and they undergo a clinical viability comparison with contemporary implants. To improve lattice designs, finite element analysis (FEA) was utilized through nTopology (nTOP 4.17.3) to balance stiffness and flexibility. To examine mechanical performance under realistic conditions, a dynamic mastication loading simulation was conducted for 1.5 s across three cycles. Results: The findings reveal that hybrid implants, particularly HI_222, exhibited improved mechanical characteristics by reducing micromotions at the bone–implant interface, improving osteointegration, and attaining better stress distribution. Conclusions: By addressing stress shielding and boosting implant performance, this work paves the way for personalized implant designs, developing dental technology, and improving clinical results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University, Sapporo 060-8628, Japan

Division of Mechanical and Aerospace Engineering, Faculty of Engineering, Hokkaido University, Sapporo 060-8628, Japan

Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan

Funding

the National Science and Technology Council (Taiwan) · MEXT Grant-in-Aid for Scientific Research (A)

References (83)

Show source-provided references
1. Experimental Study on Flow and Heat Transfer Performance of Triply Periodic Minimal Surface Structures and Their Hybrid Form as Disturbance Structure10.1016/j.icheatmasstransfer.2023.106942 ↗
2. Digital Light Processing 3D Printing of Ceramic Materials: A Review on Basic Concept, Challenges, and Applications10.1007/s00170-023-12847-3 ↗
3. The Axially-Loaded Behaviours of Schwarz Primitive (SP)-Based Structures: An Experimental and DEM Study10.1016/j.tws.2024.111973 ↗
4. Effect of Volume Fraction and Unit Cell Size on Manufacturability and Compressive Behaviors of Ni-Ti Triply Periodic Minimal Surface Lattices
5. V Complicity of Degradable Polymers in Health-Care Applications10.1016/j.mtchem.2019.100236 ↗
6. Sundaramoorthy, R., and Raja Balayanan, S.R. (2022). Additive Manufacturing of Composites for Biomedical Implants. High-Performance Composite Structures. Additive Manufacturing and Processing, Springer.10.1007/978-981-16-7377-1_6 ↗
7. 3D Printed CoCrMo Personalised Load-Bearing Meta-Scaffold for Critical Size Tibial Reconstruction10.1016/j.stlm.2024.100163 ↗
8. Recent Advancements and Applications in 3D Printing of Functional Optics
9. Frontiers in Laser Additive Manufacturing Technology10.1016/j.amf.2024.200160 ↗
10. Fabrication of Novel 316L Stainless Steel Scaffolds by Combining Freeze-Casting and 3D-Printed Gyroid Templating Techniques10.1016/j.msea.2024.147200 ↗
11. Assessing the Compressive and Tensile Properties of TPMS-Gyroid and Stochastic Ti64 Lattice Structures: A Study on Laser Powder Bed Fusion Manufacturing for Biomedical Implants10.1016/j.jsamd.2023.100663 ↗
12. Effect of Unit Cell Rotation on Mechanical Performance of Selective Laser Melted Gyroid Structures for Bone Tissue Engineering10.1016/j.pes.2024.100011 ↗
13. Sheng, X., Liu, H., Xu, Y., Wang, Z., Zhang, W., Li, C., and Wang, J. (2024). Functionalized Biomimetic Mineralized Collagen Promotes Osseointegration of 3D-Printed Titanium Alloy Microporous Interface. Mater. Today Bio, 24.10.1016/j.mtbio.2023.100896 ↗
14. Sheng, X., Che, Z., Qiao, H., Qiu, C., Wu, J., Li, C., Tan, C., Li, J., Wang, G., and Liu, W. (2024). A Functional Mineralized Collagen Hydrogel to Promote Angiogenic and Osteogenic for Osseointegration of 3D-Printed Titanium Alloy Microporous Scaffolds. Int. J. Biol. Macromol., 277.10.1016/j.ijbiomac.2024.133806 ↗
15. Porous Titanium for Medical Implants
16. Prakoso, A.T., Basri, H., Adanta, D., Yani, I., Ammarullah, M.I., Akbar, I., Ghazali, F.A., Syahrom, A., and Kamarul, T. (2023). The Effect of Tortuosity on Permeability of Porous Scaffold. Biomedicines, 11.10.3390/biomedicines11020427 ↗
17. Salaha, Z.F.M., Ammarullah, M.I., Abdullah, N.N.A.A., Aziz, A.U.A., Gan, H.S., Abdullah, A.H., Abdul Kadir, M.R., and Ramlee, M.H. (2023). Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model. Materials, 16.10.3390/ma16093298 ↗
18. Davidopoulou, S., Batas, L., Karakostas, P., Tortopidis, D., Barmpalexis, P., Assimopoulou, A., Angelopoulos, C., and Tsalikis, L. (2024). Multidimensional 3D-Printed Scaffolds for Ridge Preservation and Dental Implant Placement: A Systematic Review. Appl. Sci., 14.10.3390/app14020892 ↗
19. Vancomycin-Encapsulated Hydrogel Loaded Microarc-Oxidized 3D-Printed Porous Ti6Al4V Implant for Infected Bone Defects: Reconstruction, Anti-Infection, and Osseointegration
20. Ma, C., de Barros, N.R., Zheng, T., Gomez, A., Doyle, M., Zhu, J., Nanda, H.S., Li, X., Khademhosseini, A., and Li, B. (2024). 3D Printing and Surface Engineering of Ti6Al4V Scaffolds for Enhanced Osseointegration in an In Vitro Study. Biomimetics, 9.10.3390/biomimetics9070423 ↗
21. Miao, X., Hu, J., Xu, Y., Su, J., and Jing, Y. (2024). Review on Mechanical Properties of Metal Lattice Structures. Compos. Struct., 118267.10.1016/j.compstruct.2024.118267 ↗
22. Meta-Structures for Energy Absorption: Materials, Designs, and Applications in Additive Manufacturing and Its Future Scope10.1007/s40430-024-05094-4 ↗
23. He, S., Zhu, J., Jing, Y., Long, S., Tang, L., Cheng, L., and Shi, Z. (2024). Effect of 3D-Printed Porous Titanium Alloy Pore Structure on Bone Regeneration: A Review. Coatings, 14.10.3390/coatings14030253 ↗
24. Shahid, M.N., Shahid, M.U., Rasheed, S., Irfan, M., and Obeidi, M.A. (2024). Computational Investigation of the Fluidic Properties of Triply Periodic Minimal Surface (TPMS) Structures in Tissue Engineering. Designs, 8.10.3390/designs8040069 ↗
25. Maevskaia, E., Ghayor, C., Bhattacharya, I., Guerrero, J., and Weber, F.E. (2024). TPMS Microarchitectures for Vertical Bone Augmentation and Osteoconduction: An In Vivo Study. Materials, 17.10.3390/ma17112533 ↗
26. Expanding the Mechanical and Mass-Transport Combination for Bone Scaffolds: Through Stretched Structure10.1016/j.compstruct.2023.117783 ↗
27. Radially and Axially Graded Cellular Tibial Stems for Total Knee Replacement10.1016/j.ijmecsci.2023.108772 ↗
28. Wakjira, Y., Cioni, A., and Lemu, H.G. (2024). Current Status of the Application of Additive-Manufactured TPMS Structure in Bone Tissue Engineering. Prog. Addit. Manuf., 1085–1102.10.1007/s40964-024-00714-w ↗
29. Joshua, R.J.N., Raj, S.A., Hameed Sultan, M.T., Łukaszewicz, A., Józwik, J., Oksiuta, Z., Dziedzic, K., Tofil, A., and Shahar, F.S. (2024). Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review. Materials, 17.10.3390/ma17030769 ↗
30. Gao, J., Pan, Y., Gao, Y., Pang, H., Sun, H., Cheng, L., and Liu, J. (2024). Research Progress on the Preparation Process and Material Structure of 3D-Printed Dental Implants and Their Clinical Applications. Coatings, 14.10.3390/coatings14070781 ↗
31. Biomaterial Scaffolds in Maxillofacial Bone Tissue Engineering: A Review of Recent Advances
32. Chen, H., Song, G., Xu, T., Meng, C., Zhang, Y., Xin, T., Yu, T., Lin, Y., and Han, B. (2024). Biomaterial Scaffolds for Periodontal Tissue Engineering. J. Funct. Biomater., 15.10.3390/jfb15080233 ↗
33. Verma, R., Kumar, J., Singh, N.K., Rai, S.K., Saxena, K.K., and Xu, J. (2022). Design and Analysis of Biomedical Scaffolds Using TPMS-Based Porous Structures Inspired from Additive Manufacturing. Coatings, 12.10.3390/coatings12060839 ↗
34. Alemayehu, D.B., Todoh, M., Hsieh, J.-H., Li, C., and Huang, S.-J. (2023). Improving Pure Titanium’s Biological and Mechanical Characteristics through ECAP and Micro-Arc Oxidation Processes. Micromachines, 14.10.20944/preprints202306.0173.v1 ↗
35. Corrosion behavior of commercially-pure titamium with different microstructures
36. Tribotechnical Characteristics of Commercially Pure Titanium with Different Grain Sizes and TiC and TiO2 Coatings10.3103/S1068366619040111 ↗
37. Vibration Characteristics of Additive Manufactured IWP-Type TPMS Lattice Structures10.1016/j.compstruct.2023.117642 ↗
38. Crashworthiness Analysis of the Biomimetic Lotus Root Lattice Structure10.1016/j.ijmecsci.2023.108774 ↗
39. Vibration Analysis of FGM Anisogrid Lattice Plates with One Width Fold Based on the Continuous Model Using the GDQE Method10.1016/j.tws.2023.111386 ↗
40. Bruggeman, K., and Palazotto, A.N. (2024, January 8–12). Characterization of Triply Periodic Minimal Structures for Additive Manufacturing Production and Residual Stress Analysis. Proceedings of the AIAA SCITECH 2024 Forum, Orlando, FL, USA.10.2514/6.2024-2076 ↗
41. Mechanical Properties of Porous Materials Based on New Triply Periodic and Minimal Surfaces10.1080/15376494.2024.2303724 ↗
42. Tkac, J., Toth, T., Mizera, O., Molnar, V., Fedorko, G., and Dovica, M. (2024). Comparison of Quality of Porous Structure Specimens Produced by Different Additive Technologies and from Different Materials. Appl. Sci., 14.10.3390/app14020648 ↗
43. Wang, L., He, L., Liu, F., Yuan, H., Li, J., and Chen, M. (2024). Mechanical Characterization of Multifunctional Metal-Coated Polymer Lattice Structures. Materials, 17.10.3390/ma17030741 ↗
44. Topology Optimization of a Robot Gripper with NTopology10.24840/2183-6493_010-001_002051 ↗
45. Functional Characterization of Biomechanical Loading and Biocorrosion Resistance Properties of Novel Additively Manufactured Porous CoCrMo Implant: Comparative Analysis with Gyroid and Rhombic Dodecahedron10.1016/j.matchemphys.2024.129139 ↗
46. Bhat, C., Prajapati, M.J., Kumar, A., and Jeng, J.-Y. (2024). Additive Manufacturing-Enabled Advanced Design and Process Strategies for Multi-Functional Lattice Structures. Materials, 17.10.3390/ma17143398 ↗
47. Moya, B.J., Rivas, M., Quiza, R., and Davim, J.P. (2024). Computer Simulation-Based Multi-Objective Optimisation of Additively Manufactured Cranial Implants. Technologies, 12.10.20944/preprints202407.0500.v1 ↗
48. Chibinyani, M.I., Dzogbewu, T.C., Maringa, M., and Muiruri, A. (2024). Lattice Structures Built with Different Polygon Hollow Shapes: A Review on Their Analytical Modelling and Engineering Applications. Appl. Sci., 14.10.3390/app14041582 ↗
49. Alemayehu, D.B., Todoh, M., and Huang, S.J. (2024). Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices. J. Funct. Biomater., 15.10.20944/preprints202403.0039.v1 ↗
50. Advances in Additive Manufacturing of Nanocomposite Materials Fabrications and Applications10.1016/j.eurpolymj.2024.113406 ↗
51. Nazir, A., Waqar, S., ul Haq, M.R., and Tanveer, M.Q. (2024). Design for Additive Manufacturing of Cellular Structures. Additive Manufacturing Materials and Technology, Elsevier.10.1016/B978-0-443-18462-8.00014-3 ↗
52. Alkunte, S., Fidan, I., Naikwadi, V., Gudavasov, S., Ali, M.A., Mahmudov, M., Hasanov, S., and Cheepu, M. (2024). Advancements and Challenges in Additively Manufactured Functionally Graded Materials: A Comprehensive Review. J. Manuf. Mater. Process., 8.10.3390/jmmp8010023 ↗
53. Mrówczyński, D., Gajewski, T., Pośpiech, M., and Garbowski, T. (2024). Estimation of the Compressive Strength of Cardboard Boxes Including Packaging Overhanging on the Pallet. Appl. Sci., 14.10.3390/app14020819 ↗
54. Design and Development of Shell and Tube Heat Exchanger for Harar Brewery Company Pasteurizer Application (Mechanical and Thermal Design)
55. Experimental and FEM Analysis of Three Carbon Steel Characterization under Quasi-Static Strain Rate for Bumper Beam Application10.1051/matecconf/201712300019 ↗
56. Nonlinear Finite Element Analysis of Bone-Implant Contact in Three Short Dental Implant Models with Varying Osseointegration Percentages Nonlinear Finite Element Analysis of Bone-Implant Contact in Three Short Dental Implant Models with Varying Osseointeg10.3390/oral4040040 ↗
57. Alemayehu, D.-B., and Jeng, Y.-R. (2021). Three-Dimensional Finite Element Investigation into Effects of Implant Thread Design and Loading Rate on Stress Distribution in Dental Implants and Anisotropic Bone. Materials, 14.10.20944/preprints202109.0221.v1 ↗
58. Alemayehu, D.B., and Todoh, M. (2024). Enhanced Energy Absorption with Bioinspired Composite Triply Periodic Minimal Surface Gyroid Lattices Fabricated via Fused Filament Fabrication (FFF). J. Manuf. Mater. Process., 8.10.20944/preprints202403.1003.v1 ↗
59. Assessment Of Dental Implant Survival Rates Post Platelet-Rich Plasma Treatment: A Comprehensive Analysis
60. Development of a Critical Edge-Based Adaptive Toolpath Strategy to Improve Geometrical Accuracy of Incrementally Formed Titanium Implants10.1016/j.jmapro.2023.12.053 ↗
61. Obtaining Auxetic and Isotropic Metamaterials in Counterintuitive Design Spaces: An Automated Optimization Approach and Experimental Characterization10.1038/s41524-023-01186-2 ↗
62. Mechanical Properties of Additively Manufactured Lattice Structures Designed by Deep Learning10.1016/j.tws.2023.111475 ↗
63. Stress-Driven Generative Design and Numerical Assessment of Customized Additive Manufactured Lattice Structures10.1016/j.matdes.2024.112956 ↗
64. Hedayati, R., Alavi, M., and Sadighi, M. (2024). Effect of Degradation of Polylactic Acid (PLA) on Dynamic Mechanical Response of 3D Printed Lattice Structures. Materials, 17.10.3390/ma17153674 ↗
65. Elastic Properties of Human Supraorbital and Mandibular Bone10.1002/ajpa.1330900304 ↗
66. Anisotropic Elasticity of Cortical and Cancellous Bone in the Posterior Mandible Increases Peri-implant Stress and Strain under Oblique Loading10.1034/j.1600-0501.2001.120614.x ↗
67. Effect of Implant Diameter and Length on Stress Distribution for Titanium and Zirconia Implants by Using Finite Element Analysis (FEA)10.4236/oalib.1101211 ↗
68. (2016). Dynamic Loading Test for Endosseous Dental Implants (Standard No. ISO 14801:2016).
69. (2009). Biological Evaluation of Medical Devices—Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993-5:2009).
70. Binobaid, A., Guner, A., Camilleri, J., Jiménez, A., and Essa, K. (2024). A 3D Printed Ultra-Short Dental Implant Based on Lattice Structures and ZIRCONIA/Ca2SiO4 Combination. J. Mech. Behav. Biomed. Mater., 155.10.1016/j.jmbbm.2024.106559 ↗
71. Polymeric Composites of Cubic-Octahedron and Gyroid Lattice for Biomimetic Dental Implants10.1016/j.matchemphys.2022.126454 ↗
72. Gerbino, S., Lanzotti, A., Martorelli, M., Mirálbes Buil, R., Rizzi, C., and Roucoules, L. (2023). Optimal Design of Surface Functionally Graded Dental Implants with Improved Properties. Proceedings of the Advances on Mechanics, Design Engineering and Manufacturing IV, Springer International Publishing.10.1007/978-3-031-15928-2 ↗
73. In Vivo XCT Bone Characterization of Lattice Structured Implants Fabricated by Additive Manufacturing10.1016/j.heliyon.2017.e00374 ↗
74. Onder, M.E., Culhaoglu, A., Ozgul, O., Tekin, U., Atıl, F., Taze, C., and Yasa, E. (2024). Biomimetic Dental Implant Production Using Selective Laser Powder Bed Fusion Melting: In-Vitro Results. J. Mech. Behav. Biomed. Mater., 151.10.1016/j.jmbbm.2023.106360 ↗
75. Zhang, J., Zhang, X., Chen, Y., Feng, W., and Chen, X. (2021). Novel Design and Finite Element Analysis of Diamond-like Porous Implants with Low Stiffness. Materials, 14.10.3390/ma14226918 ↗
76. Time-Frequency Analysis of Chewing Activity in the Natural Environment10.1177/0022034511416669 ↗
77. Impact of Lattice versus Solid Structure of 3D-Printed Multiroot Dental Implants Using Ti-6Al-4V: A Preclinical Pilot Study10.5051/jpis.2105720286 ↗
78. Laser Beam Melting 3D Printing of Ti6Al4V Based Porous Structured Dental Implants: Fabrication, Biocompatibility Analysis and Photoelastic Study
79. Synthetic Bone: Design by Additive Manufacturing10.1016/j.actbio.2019.07.049 ↗
80. The Design of Additively Manufactured Lattices to Increase the Functionality of Medical Implants10.1016/j.msec.2018.10.052 ↗
81. Feasibility Evaluation of a New Lattice for Porous Surface Design in Additive Manufacturing Medical Implants under Interfacial Tensile Bonded Testing
82. Additively Manufactured Subperiosteal Implants for the Rehabilitations of Lateral Incisors Agenesis – a Case Series
83. Clinical Performance of Additively Manufactured Subperiosteal Implants: A Systematic Review10.1186/s40729-024-00521-6 ↗