Clinical Survival Rate and Laboratory Failure of Dental Veneers: A Narrative Literature Review
Source abstract
Abstract
There is a vast amount of published literature concerning dental veneers; however, the effects of tooth preparation, aging, veneer type, and resin cement type on the failure of dental veneers in laboratory versus clinical scenarios are not clear. The purpose of the present narrative review was to determine the principal factors associated with failures of dental veneers in laboratory tests and to understand how these factors translate into clinical successes/failures. Articles were identified and screened by the lead author in January 2024 using the keywords ‘‘dental veneer”, “complication”, “survival rate”, “failure”, and “success rate” using PubMed/Medline, Scopus, Google Scholar, and Science Direct. The inclusion criteria included articles published between January 1999 and January 2024 on the topics of preparation of a tooth, aging processes of the resin cement and veneer, translucency, thickness, fabrication technique of the veneer; shade, and thickness of the resin cement. The exclusion criteria included articles that discussed marginal and internal fit, microhardness, water sorption, solubility, polishability, occlusal veneers, retention, surface treatments, and wear. The results of the present review indicated that dental veneers generally have a high survival rate (>90% for more than 10 years). The amount of preserved enamel layer plays a paramount role in the survival and success rates of veneers, and glass-ceramic veneers with minimal/no preparation showed the highest survival rates. Fracture was the primary failure mechanism associated with decreased survival rate, followed by debonding and color change. Fractures increased in the presence of parafunctional activities. Fewer endodontic complications were associated with veneer restorations. No difference was observed between the maxillary and mandibular teeth. Clinical significance: Fractures can be reduced by evaluation of occlusion immediately after cementation and through the use of high-strength veneer materials, resin cements with low moduli, and thin layers of highly polished veneers. Debonding failures can be reduced with minimal/no preparation, and immediate dentin sealing should be considered when dentin is exposed. Debonding can also be reduced by preventing contamination from blood, saliva, handpiece oil, or fluoride-containing polishing paste; through proper surface treatment (20 s of hydrofluoric acid etching for glass ceramic followed by silane for 60 s); and through use of light-cured polymerization for thin veneers. Long-term color stability may be maintained using resin cements with UDMA-based resin, glass ceramic materials, and light-cure polymerization with thin veneers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Research and COVID-19 · Dental materials and restorations · Dental Radiography and Imaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Substitutive Dental Sciences, Taibah University, Madinah 42353, Saudi Arabia
Department of Mechanical and Materials Engineering, The University of Alabama at Birmingham, Birmingham, AL 35294, USA
References (68)
Show source-provided references
1. Comparison of the color change of porcelain laminate veneers produced by different materials after luting with three resin cements10.2341/21-099-L ↗
2. Color stability and marginal adaptation of ceramic veneers cemented using different composite resins
3. Combination of minimal- and non-preparation techniques with ceramic veneers for managing esthetic deficiencies
4. Effect of material thickness and coffee thermocycling on the color stability and translucency of additively and subtractively manufactured resin-based materials for definitive restorations
5. A prospective comparative analysis of the survival rates of conventional vs no-prep/minimally invasive veneers over a mean period of 9 years10.1007/s00784-021-04289-6 ↗
6. Effect of thickness and bonding technique on fatigue and fracture resistance of feldspathic ultra-thin laminate veneers10.1055/s-0042-1745770 ↗
7. Longevity of lithium disilicate indirect restorations in posterior teeth prepared by undergraduate students: A retrospective study up to 8.5 years10.1016/j.jdent.2020.103569 ↗
8. Three-dimensional quantification of enamel preservation in tooth preparation for porcelain laminate veneers: A fully digital workflow in vitro study10.2341/20-286-L ↗
9. Effect of incisal preparation design on the fracture strength of monolithic zirconia-reinforced lithium silicate laminate veneers10.1111/jopr.13689 ↗
10. Kintopp, C.C.A., Diógenes, A.N., Lopes, R.T., Weber, K.R., Rezende, C.E.E., Kaizer, M.D.R., and Gonzaga, C.C. (2024). Stress distribution on teeth restored with veneers using various incisal preparation designs: A 3D finite element analysis study. J. Prosthet. Dent., in press.10.1016/j.prosdent.2024.03.005 ↗
11. The failure load of CAD/CAM generated zirconia and glass-ceramic laminate veneers with different preparation designs10.1016/S0022-3913(12)60198-X ↗
12. Tribst, J.P.M., Dos Santos, A.F.C., da Cruz Santos, G., da Silva Leite, L.S., Lozada, J.C., Silva-Concílio, L.R., Baroudi, K., and Amaral, M. (2021). Effect of cement layer thickness on the immediate and long-term bond strength and residual stress between lithium disilicate glass-ceramic and human dentin. Materials, 14.10.3390/ma14185153 ↗
13. Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers10.1016/S0022-3913(99)70278-7 ↗
14. Influence of thickness and incisal extension of indirect veneers on the biomechanical behavior of maxillary canine teeth10.5395/rde.2018.43.e48 ↗
15. Posterior minimally invasive full-veneers: Effect of ceramic thicknesses, bonding substrate, and preparation designs on failure-load and -mode after fatigue10.1111/jerd.12861 ↗
16. Mekled, S., Elwazeer, S., Jurado, C.A., White, J., Faddoul, F., Afrashtehfar, K.I., and Fischer, N.G. (2023). Ultra-translucent zirconia laminate veneers: The Influence of restoration thickness and stump tooth-shade. Materials, 16.10.3390/ma16083030 ↗
17. Khosravani, S.R., Kahnamoui, M.A., Kimyai, S., Navimipour, E.J., Mahounak, F.S., and Azar, F.P. (2022). Final colour of ultratranslucent multilayered zirconia veneers, effect of thickness, and resin cement shade. Biomed. Res. Int., 2022.10.1155/2022/2555797 ↗
18. Effect of milling, fitting adjustments, and hydrofluoric acid etching on the strength and roughness of CAD-CAM glass-ceramics: A systematic review and meta-analysis10.1016/j.prosdent.2021.02.031 ↗
19. Effect of die spacer thickness on the fracture resistance of CAD/CAM lithium disilicate veneers on maxillary first premolars10.2147/CCIDE.S313131 ↗
20. Effect of die spacer thickness on the microshear bond strength of CAD/CAM lithium disilicate veneers10.1155/2021/4593131 ↗
21. Bencun, M., Ender, A., Wiedemeier, D.B., and Mehl, A. (2020). Fracture load of CAD/CAM feldspathic crowns influenced by abutment material. Materials, 13.10.3390/ma13153407 ↗
22. Preheated restorative composite resin for luting ceramic laminate veneers: An optimized technique report
23. The evaluation of stress patterns in porcelain laminate veneers with different restoration designs and loading angles induced by functional loads: A three-dimensional finite element analysis study10.4103/njcp.njcp_45_17 ↗
24. Mihali, S.G., Lolos, D., Popa, G., Tudor, A., and Bratu, D.C. (2022). Retrospective long-term clinical outcome of feldspathic ceramic veneers. Materials, 15.10.3390/ma15062150 ↗
25. The effect of dentin bonding and material thickness on the flexural properties of a lithium-disilicate glass-ceramic
26. Optical properties and failure load of thin CAD/CAM ceramic veneers
27. Ceramic laminate veneers: Effect of preparation design and ceramic thickness on fracture resistance and marginal quality in vitro10.1007/s00784-019-03136-z ↗
28. Fracture resistance of ceramic laminate veneers bonded to teeth with class V composite fillings after cyclic loading10.1155/2018/1456745 ↗
29. Zhu, J., Gao, J., Jia, L., Tan, X., Xie, C., and Yu, H. (2022). Shear bond strength of ceramic laminate veneers to finishing surfaces with different percentages of preserved enamel under a digital guided method. BMC Oral. Health, 22.10.1186/s12903-021-02038-5 ↗
30. Performance of ceramic laminate veneers with immediate dentine sealing: An 11 year prospective clinical trial10.1016/j.dental.2019.04.008 ↗
31. Rubber dam isolation for bonding ceramic veneers: A five-year post-insertion clinical report
32. Accuracy of reduction depths of tooth preparation for porcelain laminate veneers assisted by different tooth preparation guides: An in vitro study10.1111/jopr.13456 ↗
33. Clinical and microbiologic outcomes of ceramic laminate veneers bonded to teeth without a finish line: 1-year results of a prospective study10.11607/ijp.7718 ↗
34. Debonding of leucite-reinforced glass-ceramic veneers using Er, Cr:YSGG laser device: Optimizing speed with thermal safety10.2341/18-005-L ↗
35. Hydrofluoric acid concentration and etching time affect differently the microstructure and surface properties of pressed lithium disilicate glass ceramics10.1111/jerd.13140 ↗
36. Long-term bond of glass ceramic and resin cement: Evaluation of titanium tetrafluoride as an alternative etching agent for lithium disilicate ceramics
37. Effect of chemical surface treatment of contaminated CAD-CAM resin composite blocks on surface free energy and bond strength
38. Surface treatment and cementation of lithium silicate ceramics containing ZrO210.2341/20-156-L ↗
39. Hardan, L., Devoto, W., Bourgi, R., Cuevas-Suárez, C.E., Lukomska-Szymanska, M., Fernández-Barrera, M.Á., Cornejo-Ríos, E., Monteiro, P., Zarow, M., and Jakubowicz, N. (2022). Immediate dentin sealing for adhesive cementation of indirect restorations: A systematic review and meta-analysis. Gels, 8.10.3390/gels8030175 ↗
40. Effect of phosphoric acid and sodium hydroxide on cleaning and bonding of saliva-contaminated feldspar porcelain10.2186/jpr.JPR_D_21_00326 ↗
41. Effect of thickness and translucency on color change and masking ability of ceramic materials used for laminate veneers
42. Retrospective evaluation of extended glass-ceramic ceramic laminate veneers after a mean observational period of 10 years10.1111/jerd.12597 ↗
43. The resin bond to high-translucent zirconia-A systematic review10.1111/jerd.12876 ↗
44. Maxillary rehabilitation of tetracycline-stained teeth with diastemas by using ceramic veneers and a digital workflow10.1016/j.jds.2023.04.021 ↗
45. Effect of consecutive firings on the optical and mechanical properties of silicate and lithium disilicate based glass-ceramics10.1111/jopr.13306 ↗
46. Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: Effect of quantity and position of specimens during firing10.2186/jpr.JPOR_2019_336 ↗
47. Color changes of ceramic veneers following glazing with respect to their composition10.4047/jap.2019.11.1.16 ↗
48. Effect of ceramic material and resin cement systems on the color stability of laminate veneers after accelerated aging10.1016/j.prosdent.2017.09.014 ↗
49. Colour agreement between try-in paste and resin cement: Effect of background on zirconia-reinforced lithium silicate10.1111/adj.12866 ↗
50. Kavut, İ., and Uğur, M. (2022). The effect of amine-free initiator system and polymerization type on long-term color stability of resin cements: An in-vitro study. BMC Oral. Health, 22.10.1186/s12903-022-02456-z ↗
51. Microleakage of porcelain laminate veneers cemented with different bonding techniques
52. Sen, N., and Sermet, B. (2023). Masking ability of monolithic CAD-CAM laminate veneers over different resin cement shades and substrate colors. Int. J. Prosthodont., ahead of print.10.11607/ijp.8533 ↗
53. The effect of extended aging on the optical properties of different zirconia materials10.1016/j.jpor.2016.11.002 ↗
54. Retrospective clinical evaluation of a no-prep porcelain veneer protocol10.1016/j.prosdent.2021.04.016 ↗
55. Survival and complication rates of resin composite laminate veneers: A systematic review and meta-analysis10.1016/j.jebdp.2023.101911 ↗
56. Two-year evaluation of porcelain laminate veneers using FDI criteria10.1111/jopr.13641 ↗
57. Sen, N., and Olley, R.C. (2023). Retrospective evaluation of factors affecting long-term clinical performance of CAD-CAM laminate veneers. Int. J. Prosthodont.10.11607/ijp.8499 ↗
58. Kam Hepdeniz, O., and Temel, U.B. (2023). Clinical survival of No-prep indirect composite laminate veneers: A 7-year prospective case series study. BMC Oral. Health, 23.10.1186/s12903-023-02949-5 ↗
59. Clinical performance of minimally invasive monolithic ultratranslucent zirconia veneers: A case series up to five years of follow-up10.2341/22-118-T ↗
60. Clinical performance of direct composite restorations in patients with amelogenesis imperfecta—Anterior restorations
61. Demirekin, Z.B., and Turkaslan, S. (2022). Laminate veneer ceramics in aesthetic rehabilitation of teeth with fluorosis: A 10-year follow-up study. BMC Oral. Health, 22.10.1186/s12903-022-02079-4 ↗
62. 10-year practice-based evaluation of ceramic and direct composite veneers10.1016/j.dental.2022.03.007 ↗
63. Retrospective analysis of lithium disilicate laminate veneers applied by experienced dentists: 10-year results10.11607/ijp.6234 ↗
64. Main clinical outcomes of feldspathic porcelain and glass-ceramic laminate veneers: A systematic review and meta-analysis of survival and complication rates10.11607/ijp.4315 ↗
65. Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites10.1016/j.dental.2008.01.014 ↗
66. Effect of thickness of ceramic veneers on color stability and bond strength of resin luting cements containing alternative photoinitiators
67. Favarão, J., Oliveira, D., Zanini, M.M., Rocha, M.G., Correr-Sobrinho, L., and Sinhoreti, M. (2021). Effect of curing-light attenuation on color stability and physical and chemical properties of resin cements containing different photoinitiators. J. Mech. Behav. Biomed. Mater., 113.10.1016/j.jmbbm.2020.104110 ↗
68. The use of different photoinitiator systems in photopolymerizing resin cements through ceramic veneers10.2341/17-263-L ↗