Show source-provided references
5. Additive manufacturing of biomaterials for bone tissue engineering—A critical review of the state of the art and new concepts
10.1016/j.pmatsci.2022.100963 ↗6. Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges
10.1016/j.mser.2021.100648 ↗11. Additively manufactured metallic biomaterials
12. Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
10.1016/j.mser.2021.100606 ↗14. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
10.1016/j.matdes.2017.11.021 ↗15. Ni, J., Ling, H., Zhang, S., Wang, Z., Peng, Z., Benyshek, C., Zan, R., Miri, A.K., Li, Z., and Zhang, X. (2019). Three-dimensional printing of metals for biomedical applications. Mater. Today Bio, 3.
10.1016/j.mtbio.2019.100024 ↗16. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
10.1016/j.msec.2017.02.094 ↗17. Physiomimetic biocompatibility evaluation of directly printed degradable porous iron implants using various cell types
10.1016/j.actbio.2023.07.056 ↗18. Full-thickness osteochondral defect repair using a biodegradable bilayered scaffold of porous zinc and chondroitin sulfate hydrogel
21. Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
23. Laser powder bed fusion: A state-of-the-art review of the technology, materials, properties & defects, and numerical modelling
10.1016/j.jmrt.2022.07.121 ↗24. Surface conditioning of additively manufactured titanium implants and its influence on materials properties and in vitro biocompatibility
10.1016/j.msec.2020.111631 ↗27. The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4V
28. Yadroitsau, I. (2008). Direct Manufacturing of 3D Objects by Selective Laser Melting of Metal Powders. [Ph.D. Thesis, Jean Monnet University].
31. Pulsed-mode Selective Laser Melting of 17-4 PH stainless steel: Effect of laser parameters on density and mechanical properties
10.1016/j.jmapro.2021.06.017 ↗35. Experimental Approbation of Selective Laser Melting of Powders by the Use of Non-Gaussian Power Density Distributions
10.1016/j.phpro.2014.08.095 ↗39. Melting, fusion and solidification behaviors of Ti-6Al-4V alloy in selective laser melting at different scanning speeds
10.1108/RPJ-07-2019-0206 ↗42. Effect of scanning strategy and speed on the microstructure and mechanical properties of selective laser melted IN718 nickel-based superalloy
10.1007/s00170-019-03545-0 ↗45. Investigation of Performance and Residual Stress Generation of AlSi10Mg Processed by Selective Laser Melting
10.1155/2018/7814039 ↗46. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
47. Numerical analysis of the effect of the scan strategy on the residual stress in the multi-laser selective laser melting
10.1016/j.rinp.2020.103005 ↗48. In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
10.1016/j.msea.2017.04.033 ↗49. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
10.2351/1.4828755 ↗50. Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature
10.1016/j.matdes.2021.110355 ↗53. Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques
10.1016/j.optlastec.2021.107806 ↗54. Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting
56. Influence of Particle Size on Laser Absorption and Scanning Track Formation Mechanisms of Pure Tungsten Powder During Selective Laser Melting
10.1016/j.eng.2019.07.003 ↗57. Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy
58. Effect of Powder Particle Shape on the Properties of In Situ Ti–TiB Composite Materials Produced by Selective Laser Melting
10.1016/j.jmst.2015.08.007 ↗59. Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties
10.1016/j.jmatprotec.2013.03.009 ↗61. Prediction of powder bed thickness by spatter detection from coaxial optical images in selective laser melting of 316L stainless steel
10.1016/j.matdes.2021.110301 ↗63. Tao, W., and Leu, M.C. (2016, January 1–3). Design of lattice structure for additive manufacturing. Proceedings of the 2016 International Symposium on Flexible Automation (ISFA), Cleveland, OH, USA.
10.1109/ISFA.2016.7790182 ↗66. Zhao, H., and Fleck, N.A. (2007, January 17–20). Mechanical Properties and Design of Lattice Composites and Structures. Proceedings of the IUTAM Symposium on Mechanical Properties of Cellular Materials, Cachan, France.
67. Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties
10.1016/j.actbio.2017.02.024 ↗73. Rationally designed meta-implants: A combination of auxetic and conventional meta-biomaterials
10.1039/C7MH00699C ↗74. Bone cell response to additively manufactured 3D micro-architectures with controlled Poisson’s ratio: Auxetic vs. non-auxetic meta-biomaterials
10.1016/j.actbio.2024.01.045 ↗76. Brandt, M. (2017). 5—Mechanical properties of Ti6Al4V and AlSi12Mg lattice structures manufactured by Selective Laser Melting (SLM). Laser Additive Manufacturing, Woodhead Publishing.
77. Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior
10.1016/j.rcim.2017.06.006 ↗80. The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
10.1115/1.4001743 ↗81. Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
10.1016/j.msea.2015.01.031 ↗83. The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants
10.1016/j.ijmecsci.2020.106180 ↗85. Han, X., Zhu, H., Nie, X., Wang, G., and Zeng, X. (2018). Investigation on Selective Laser Melting AlSi10Mg Cellular Lattice Strut: Molten Pool Morphology, Surface Roughness and Dimensional Accuracy. Materials, 11.
10.3390/ma11030392 ↗86. Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method
10.1007/s11340-015-0117-y ↗88. From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
10.1016/j.actbio.2018.10.043 ↗89. Stich, T., Alagboso, F., Křenek, T., Kovářík, T., Alt, V., and Docheva, D. (2022). Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo. Bioeng. Transl. Med., 7.
10.1002/btm2.10239 ↗90. Improved osseointegration of 3D printed Ti-6Al-4V implant with a hierarchical micro/nano surface topography: An in vitro and in vivo study
10.1016/j.msec.2020.111505 ↗91. Chemical etching of Ti-6Al-4V biomaterials fabricated by selective laser melting enhances mesenchymal stromal cell mineralization
10.1002/jbm.a.37709 ↗92. Surface modification of additively manufactured metallic biomaterials with active antipathogenic properties
93. Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour
94. Novel microstructural features of selective laser melted lattice struts fabricated with single point exposure scanning
96. Effects of processing parameters on fabrication defects, microstructure and mechanical properties of additive manufactured Mg–Nd–Zn–Zr alloy by selective laser melting process
10.1016/j.jma.2022.07.005 ↗97. Effects of scanning speed on in vitro biocompatibility of 316L stainless steel parts elaborated by selective laser melting
10.1007/s00170-017-0525-5 ↗98. Understanding the impact of grain structure in austenitic stainless steel from a nanograined regime to a coarse-grained regime on osteoblast functions using a novel metal deformation–annealing sequence
10.1016/j.actbio.2012.12.003 ↗100. Orientation dependency for microstructure, geometric accuracy and mechanical properties of selective laser melting AlSi10Mg lattices
10.1016/j.jallcom.2019.03.344 ↗