Analysis of Biomechanical Characteristics of Bone Tissues Using a Bayesian Neural Network: A Narrative Review
Source abstract
Abstract
Background: Bone elasticity is one of the most important biomechanical parameters of the skeleton. It varies markedly with age, anatomical zone, bone type (cortical or trabecular) and bone marrow status. Methods: This review presents the result of a systematic review and analysis of 495 experimental and analytical papers on the elastic properties of bone tissue. The bone characteristics of hip, shoulder, skull, vertebrae as a function of the factors of age (young and old), sex (male and female), presence/absence of bone marrow and different test methods are examined. The Bayesian neural network (BNN) was used to estimate the uncertainty in some skeletal parameters (age, sex, and body mass index) in predicting bone elastic modulus. Results: It was found that the modulus of elasticity of cortical bone in young people is in the range of 10–30 GPa (depending on the type of bone), and with increasing age, this slightly decreases to 10–25 GPa, while trabecular tissue varies from 0.2 to 5 GPa and reacts more acutely to osteoporosis. Bone marrow, according to several studies, is able to partially increase stiffness under impact loading, but its contribution is minimal under slow deformations. Conclusions: BNN confirmed high variability, supplementing the predictions with confidence intervals and allowed the formation of equations for the calculation of bone tissue elastic modulus for the subsequent selection of the recommended elastic modulus of the finished implant, taking into account the biomechanical characteristics of bone tissue depending on age (young and old), sex (men and women) and anatomical zones of the human skeleton.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Bone health and osteoporosis research · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan
D. Serikbayev, East Kazakhstan Technical University, 19 Serikbayev Str., Ust-Kamenogorsk 070000, Kazakhstan
Funding
Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
References (61)
Show source-provided references
1. Rosa, N., Moura, M.F.S.F., Olhero, S., Simoes, R., Magalhães, F.D., Marques, A.T., Ferreira, J.P.S., Reis, A.R., Carvalho, M., and Parente, M. (2022). Bone: An outstanding composite material. Appl. Sci., 12.10.3390/app12073381 ↗
2. Niu, Y., Du, T., and Liu, Y. (2023). Biomechanical characteristics and analysis approaches of bone and bone substitute materials. J. Funct. Biomater., 14.10.3390/jfb14040212 ↗
3. Biological basis of bone strength: Anatomy, physiology and measurement
4. Bone organoids: Recent advances and future challenges10.1002/adhm.202302088 ↗
5. Cole, J.H., and Van Der Meulen, M.C.H. (2020). Biomechanics of bone. Contemporary Endocrinology, Springer International Publishing.10.1007/978-3-319-69287-6_10 ↗
6. Gomez, M.A., and Nahum, A.M. (2002). Biomechanics of bone. Accidental Injury: Biomechanics and Prevention, Springer.10.1007/978-0-387-21787-1_10 ↗
7. Bone mechanical properties in healthy and diseased states10.1146/annurev-bioeng-062117-121139 ↗
8. Standardizing compression testing for measuring the stiffness of human bone10.1302/2046-3758.78.BJR-2018-0025.R1 ↗
9. The elastic properties of trabecular and cortical bone tissues are similar: Results from two microscopic measurement techniques10.1016/S0021-9290(98)00177-8 ↗
10. Blázquez-Carmona, P., Mora-Macías, J., Pajares, A., Mármol, Á., and Reina-Romo, E. (2024). On the influence of structural and chemical properties on the elastic modulus of woven bone under healing. Front. Bioeng. Biotechnol., 12.10.3389/fbioe.2024.1476473 ↗
11. Stojković, J.R., Stojković, M., Turudija, R., Aranđelović, J., and Marinkovic, D. (2023). Adjustable elasticity of anatomically shaped lattice bone scaffold built by electron beam melting TI6AL4V powder. Metals, 13.10.3390/met13091522 ↗
12. Ibrahim, A., Jiang, Z., Shirvani, K., Dalili, A., and Hamid, Z.A. (2024). A Novel Viscoelastic Deformation Mechanism Uncovered during Vickers Hardness Study of Bone. J. Funct. Biomater., 15.10.3390/jfb15040087 ↗
13. Sanz, C.V., Rodríguez, I.V., Forriol, F., Tejado, E., and Lopez-Valdes, F.J. (2023). Variation in juvenile long bone properties as a function of age: Mechanical and compositional characterisation. Materials, 16.10.3390/ma16041637 ↗
14. García-Vilana, S., Sánchez-Molina, D., and Abdi, H. (2025). Acoustic Emission in Bone Biomechanics: A Comprehensive review of mechanical properties and predictive damage modelling. Sensors, 25.10.3390/s25030598 ↗
15. Anatomical distribution of the degree of mineralisation of bone tissue in human femoral neck: Impact on biomechanical properties10.1016/j.bone.2011.12.020 ↗
16. Bone mineralisation is elevated and less heterogeneous in adults with type 2 diabetes and osteoarthritis compared to controls with osteoarthritis alone10.1016/j.bone.2013.01.032 ↗
17. Determinants of the mechanical properties of bones10.1016/0021-9290(91)90379-2 ↗
18. The mechanical properties of trabecular bone: Dependence on anatomic location and function10.1016/0021-9290(87)90023-6 ↗
19. Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations10.1016/S1350-4533(98)00001-0 ↗
20. Bouxsein, M.L. (2001). Biomechanics of Age-Related Fractures. Osteoporosis, Elsevier.10.1016/B978-012470862-4/50020-9 ↗
21. Ingole, V.H., Ghule, S.S., Vuherer, T., Kokol, V., and Ghule, A.V. (2021). Mechanical properties of differently nanostructured and High-Pressure compressed Hydroxyapatite-Based materials for bone tissue regeneration. Minerals, 11.10.3390/min11121390 ↗
22. Battafarano, G., Rossi, M., De Martino, V., Marampon, F., Borro, L., Secinaro, A., and Del Fattore, A. (2021). Strategies for bone regeneration: From graft to tissue engineering. Int. J. Mol. Sci., 22.10.3390/ijms22031128 ↗
23. Garcia-Giner, V., Han, Z., Giuliani, F., and Porter, A.E. (2021). Nanoscale imaging and analysis of bone pathologies. Appl. Sci., 11.10.3390/app112412033 ↗
24. Álvarez-Lloret, P., Benavides-Reyes, C., Lee, C.M., Martínez, M.P., Conti, M.I., Rodríguez-Navarro, A.B., González-López, S., Perez-Huerta, A., and Terrizzi, A.R. (2021). Chronic lead exposure alters mineral properties in alveolar bone. Minerals, 11.10.3390/min11060642 ↗
25. Nefjodovs, V., Andze, L., Andzs, M., Filipova, I., Tupciauskas, R., Vecbiskena, L., and Kapickis, M. (2023). Wood as a possible renewable material for bone implants—Literature review. J. Funct. Biomater., 14.10.3390/jfb14050266 ↗
26. Gasik, M., Lambert, F., and Bacevic, M. (2021). Biomechanical properties of bone and mucosa for design and application of dental implants. Materials, 14.10.3390/ma14112845 ↗
27. Grill, S.L., Brouillet, F., and Drouet, C. (2025). Bone Regeneration: Mini-Review and Appealing Perspectives. Bioengineering, 12.10.3390/bioengineering12010038 ↗
28. Bhattarai, D.P., Aguilar, L.E., Park, C.H., and Kim, C.S. (2018). A review on properties of natural and synthetic based electrospun fibrous materials for bone tissue engineering. Membranes, 8.10.3390/membranes8030062 ↗
29. Ferraz, M.P. (2024). An overview on the big players in bone tissue engineering: Biomaterials, scaffolds and cells. Int. J. Mol. Sci., 25.10.3390/ijms25073836 ↗
30. Castro-Franco, A.D., Mendoza-Muñoz, I., González-Ángeles, Á., Cruz-Sotelo, S.E., Castañeda, A.M., and Siqueiros-Hernández, M. (2020). Trends in the characterisation of the proximal humerus in Biomechanical Studies: A review. Appl. Sci., 10.10.3390/app10186514 ↗
31. Łuczak, J.W., Palusińska, M., Matak, D., Pietrzak, D., Nakielski, P., Lewicki, S., Grodzik, M., and Szymański, Ł. (2024). The Future of Bone Repair: Emerging technologies and biomaterials in bone regeneration. Int. J. Mol. Sci., 25.10.3390/ijms252312766 ↗
32. Costăchescu, B., Niculescu, A.-G., Grumezescu, A.M., and Teleanu, D.M. (2023). Screw Osteointegration—Increasing biomechanical resistance to Pull-Out effect. Materials, 16.10.3390/ma16165582 ↗
33. Elastic properties of cancellous bone: Measurement by an ultrasonic technique10.1016/0021-9290(87)90327-7 ↗
34. Determination of the heterogeneous anisotropic elastic properties of human femoral bone: From nanoscopic to organ scale10.1016/j.jbiomech.2010.03.034 ↗
35. Hamandi, F., Tsatalis, J.T., and Goswami, T. (2021). Retrospective Evaluation and Framework Development of Bone Anisotropic Material Behaviour Compared with Elastic, Elastic-Plastic, and Hyper-Elastic Properties. Bioengineering, 9.10.3390/bioengineering9010009 ↗
36. Hierarchical modelling of the elastic properties of bone at submicron scales: The role of extrafibrillar mineralization10.1529/biophysj.107.125567 ↗
37. Micromechanical modelling of elastic properties of cortical bone accounting for anisotropy of dense tissue10.1016/j.jbiomech.2014.08.019 ↗
38. The effects of remodelling on the elastic properties of bone10.1007/BF02406131 ↗
39. Turek, B., Mikułowski, G., Szara, T., Dołasiński, M., Jasiński, T., and Domino, M. (2025). Aspect-Related mechanical properties of the cortical bone in the third metacarpal bone of mares. Appl. Sci., 15.10.3390/app15031593 ↗
40. Ibrahim, A., Magliulo, N., Groben, J., Padilla, A., Akbik, F., and Hamid, Z.A. (2020). Hardness, an important indicator of bone quality, and the role of collagen in bone hardness. J. Funct. Biomater., 11.10.3390/jfb11040085 ↗
41. An overview of selected material properties in finite element modelling of the human femur10.3390/biomechanics3010012 ↗
42. Baleani, M., Erani, P., Acciaioli, A., and Schileo, E. (2024). Tensile Yield Strain of Human Cortical Bone from the Femoral Diaphysis Is Constant among Healthy Adults and across the Anatomical Quadrants. Bioengineering, 11.10.3390/bioengineering11040395 ↗
43. Lin, C.-Y., and Kang, J.-H. (2021). Mechanical properties of compact bone defined by the Stress-Strain curve measured using uniaxial tensile Test: A concise review and Practical guide. Materials, 14.10.3390/ma14154224 ↗
44. A review of gender differences in hip fracture anatomy, morbidity, mortality and function
45. Determination of Anisotropic Elastic Parameters from Morphological Parameters of Cancellous Bone for Osteoporotic Lumbar Spine10.1007/s11517-021-02465-0 ↗
46. Hamandi, F., and Goswami, T. (2022). Hierarchical structure and properties of the bone at nano level. Bioengineering, 9.10.3390/bioengineering9110677 ↗
47. Kontomaris, S.V., Stylianou, A., Chliveros, G., and Malamou, A. (2023). Determining spatial variability of elastic properties for biological samples using AFM. Micromachines, 14.10.3390/mi14010182 ↗
48. Sun, C., Dong, E., Chen, J., Zheng, J., Kang, J., Jin, Z., Liu, C., Wang, L., and Li, D. (2022). The promotion of mechanical properties by bone ingrowth in Additive-Manufactured Titanium Scaffolds. J. Funct. Biomater., 13.10.3390/jfb13030127 ↗
49. Zeng, Y., Meng, Q., Chen, Y., Zou, D., and Tao, L. (2022). Age-Related study and collision response of material properties of long bones in Chinese pedestrian lower limbs. Appl. Sci., 12.10.3390/app12146911 ↗
50. Singh, N., Trajkovski, A., Trajkovski, J., Kunc, R., and Matas, J.F.R. (2025). A pilot study on the Age-Dependent, biomechanical properties of longitudinal ligaments in the human cervical spine. Bioengineering, 12.10.3390/bioengineering12010061 ↗
51. Aurégan, J.-C., Bosser, C., Bachy-Razzouk, M., Bensidhoum, M., and Hoc, T. (2023). In vivo assessment of skin surface pattern: Exploring its potential as an indicator of bone biomechanical properties. Bioengineering, 10.10.3390/bioengineering10121338 ↗
52. Kulić, M., Bagavac, P., Bekić, M., and Krstulović-Opara, L. (2024). Ex vivo biomechanical bone testing of pig femur as an experimental model. Bioengineering, 11.10.3390/bioengineering11060572 ↗
53. Effect of age on mechanical properties of the collagen phase in different orientations of human cortical bone10.1016/j.bone.2013.04.006 ↗
54. De Lacerda Schickert, S., Van Den Beucken, J.J.J.P., Leeuwenburgh, S.C.G., and Jansen, J.A. (2020). Pre-Clinical evaluation of biological bone substitute materials for application in highly loaded skeletal sites. G.; Jansen, J.A. Pre-Clinical evaluation of biological bone substitute materials for application in highly loaded skeletal sites. Biomolecules, 10.10.3390/biom10060883 ↗
55. Belluzzi, E., Todros, S., Pozzuoli, A., Ruggieri, P., Carniel, E.L., and Berardo, A. (2023). Human Cartilage Biomechanics: Experimental and Theoretical Approaches towards the Identification of Mechanical Properties in Healthy and Osteoarthritic Conditions. Processes, 11.10.3390/pr11041014 ↗
56. Pallua, J.D., Putzer, D., Jäger, E., Degenhart, G., Arora, R., and Schmölz, W. (2022). Characterizing the mechanical behaviour of bone and bone surrogates in compression using PQCT. Materials, 15.10.3390/ma15145065 ↗
57. Nguyen, H.-Q., Nguyen, T.-N.-T., Pham, T.-Q.-D., Nguyen, V.-D., Van Tran, X., and Dao, T.-T. (2021). Crack Propagation in the Tibia Bone within Total Knee Replacement Using the eXtended Finite Element Method. Appl. Sci., 11.10.3390/app11104435 ↗
58. Age-Related Changes in Trabecular Architecture Differ in Female and Male C57BL/6J Mice10.1359/jbmr.070507 ↗
59. Application of Bayesian Neural Networks in Healthcare: Three Case Studies10.3390/make6040127 ↗
60. Mukhtar, A.M., and Könke, C. (2011). Fracture mechanics and micro crack detection in bone: A short communication. Conference Medical Device Materials V. Novelty, ASM International.
61. Mechanical Properties of Bone as a Function of Position and Orientation10.1016/0021-9290(74)90070-0 ↗