journal article·2024-04-02Open access

Comparison of Zirconia Implant Surface Modifications for Optimal Osseointegration

Hyun Woo Jin, Sammy Noumbissi, Thomas G. Wiedemann

Abstract

Zirconia ceramic implants are commercially available from a rapidly growing number of manufacturers. Macroscopic and microscopic surface design and characteristics are considered to be key determining factors in the success of the osseointegration process. It is, therefore, crucial to assess which surface modification promotes the most favorable biological response. The purpose of this study was to conduct a comparison of modern surface modifications that are featured in the most common commercially available zirconia ceramic implant systems. A review of the currently available literature on zirconia implant surface topography and the associated bio-physical factors was conducted, with a focus on the osseointegration of zirconia surfaces. After a review of the selected articles for this study, commercially available zirconia implant surfaces were all modified using subtractive protocols. Commercially available ceramic implant surfaces were modified or enhanced using sandblasting, acid etching, laser etching, or combinations of the aforementioned. From our literature review, laser-modified surfaces emerged as the ones with the highest surface roughness and bone–implant contact (BIC). It was also found that surface roughness could be controlled to achieve optimal roughness by modifying the laser output power during manufacturing. Furthermore, laser surface modification induced a very low amount of preload microcracks in the zirconia. Osteopontin (OPN), an early–late osteogenic differentiation marker, was significantly upregulated in laser-treated surfaces. Moreover, surface wettability was highest in laser-treated surfaces, indicating favorable hydrophilicity and thus promoting early bone forming, cell adhesion, and subsequent maturation. Sandblasting followed by laser modification and sandblasting followed by acid etching and post-milling heat treatment (SE-H) surfaces featured comparable results, with favorable biological responses around zirconia implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

BA/DDS Joint Program, College of Dentistry, New York University, New York, NY 10010, USA

Department of Oral and Maxillofacial Implantology, University of Milan, 20122 Milano, Italy

Post-Graduate Program Oral Surgery, University of Chieti-Pescara, 65127 Pescara, Italy

Department of Biomaterials INSA Lyon, 69100 Villeurbanne, France

Private Practice, Silver Spring, MD 20910, USA

Department of Oral and Maxillofacial Surgery, College of Dentistry, New York University, New York, NY 10010, USA

References (36)

Show source-provided references
1. A Brief Historical perspective on dental implants, their surface coatings and treatments10.2174/1874210601408010050 ↗
2. Tecnica e strumentario dell’impianto C.B.S. (Cristalline Bone Screw)
3. L’implantologie en un temps chirurgical. Introduite en 1962, reconnue en 1997
4. Zirconia dental implants: A literature review10.1563/AAID-JOI-D-09-00079 ↗
5. A systematic review of the survival and complication rates of zirconia-ceramic and metal-ceramic single crowns10.1111/clr.13306 ↗
6. An Emerging Revolution in Implantology
7. Soft tissue biological response to zirconia and metal implant abutments compared with natural tooth: Microcirculation monitoring as a novel bioindicator
8. Is aseptic bone necrosis a cause for early implant failure in patients with metal allergies?—A case report and literature review
9. Titanium Intolerance and its Relevance in Clinical Practice
10. Noumbissi, S., Scarano, A., and Gupta, S. (2019). A Literature Review Study on Atomic Ions Dissolution of Titanium and Its Alloys in Implant Dentistry. Materials, 12.10.3390/ma12030368 ↗
11. Research on implants and osseointegration10.1111/prd.12254 ↗
12. Zirconia surface modifications for implant dentistry10.1016/j.msec.2019.01.062 ↗
13. Rausch, M.A., Shokoohi-Tabrizi, H., Wehner, C., Pippenger, B.E., Wagner, R.S., Ulm, C., Moritz, A., Chen, J., and Andrukhov, O. (2021). Impact of Implant Surface Material and Microscale Roughness on the Initial Attachment and Proliferation of Primary Human Gingival Fibroblasts. Biology, 10.10.3390/biology10050356 ↗
14. Nanostructures and hydrophilicity influence osseointegration: A biomechanical study in the rabbit tibia10.1111/clr.12213 ↗
15. Wettability and frictional properties on zirconia surfaces irradiated by femtosecond laser10.1016/j.colsurfa.2022.130198 ↗
16. A new testing protocol for zirconia dental implants10.1016/j.dental.2014.09.002 ↗
17. Effect of grain size on the monoclinic transformation, hardness, roughness, and modulus of aged partially stabilized zirconia10.1016/j.dental.2015.09.014 ↗
18. Environmental degradation of zirconia ceramics10.1016/0955-2219(95)00035-S ↗
19. On implant surfaces: A review of current knowledge and opinions
20. A histomorphometric evaluation of screw-shaped implants each prepared with two surface roughnesses10.1034/j.1600-0501.1998.090102.x ↗
21. Effect of laser surface texturing on primary stability and surface properties of zirconia implants10.1016/j.ceramint.2017.08.058 ↗
22. SEM observation and wettability of variously processed and fractured surface of dental zirconia10.1016/j.apsusc.2012.08.105 ↗
23. High surface energy enhances cell response to titanium substrate microstructure10.1002/jbm.a.30320 ↗
24. Enhanced Hydrophilicity and Biocompatibility of Dental Zirconia Ceramics by Oxygen Plasma Treatment10.3390/ma8020684 ↗
25. Rohr, N., Hoda, B., and Fischer, J. (2022). Surface Structure of Zirconia Implants: An Integrative Review Comparing Clinical Results with Preclinical and In Vitro Data. Materials, 15.10.3390/ma15103664 ↗
26. Hafezeqoran, A., and Koodaryan, R. (2017). Effect of Zirconia Dental Implant Surfaces on Bone Integration: A Systematic Review and Meta-Analysis. BioMed Res. Int., 2017.10.1155/2017/9246721 ↗
27. Biomechanical and histomorphometric comparison between zirconia implants with varying surface textures and a titanium implant in the maxilla of miniature pigs10.1111/j.1600-0501.2007.01401.x ↗
28. Response of osteoblast-like SAOS-2 cells to zirconia ceramics with different surface topographies10.1111/j.1600-0501.2009.01797.x ↗
29. Microstructured zirconia surfaces modulate osteogenic marker genes in human primary osteoblasts10.1007/s10856-014-5350-x ↗
30. Surface micro-structuring of zirconia dental implants10.1111/clr.12553 ↗
31. The Impact of In Vitro Accelerated Aging, Approximating 30 and 60 Years In Vivo, on Commercially Available Zirconia Dental Implants10.1111/cid.12462 ↗
32. Mechanism of zirconia microgroove surface structure for osseointegration10.1016/j.mtadv.2021.100159 ↗
33. Impacts of 3D bone-to- implant contact and implant diameter on primary stability of dental implant10.1016/j.jfma.2017.05.005 ↗
34. Current trends to measure implant stability10.4103/0972-4052.176539 ↗
35. Signaling and transcriptional regulation in osteoblast commitment and differentiation10.2741/2296 ↗
36. Dental implant design and its relationship to long-term implant success10.1097/01.ID.0000091140.76130.A1 ↗