journal article·2022-05-13Open access

Electrospun PHB/Chitosan Composite Fibrous Membrane and Its Degradation Behaviours in Different pH Conditions

Yansheng Zhou, Ying Li, Daqing Li, Yidan Yin, Fenglei Zhou

Abstract

Peripheral nerve injury (PNI) is a neurological disorder that causes more than 9 million patients to suffer from dysfunction of moving and sensing. Using biodegradable polymers to fabricate an artificial nerve conduit that replicates the environment of the extracellular matrix and guides neuron regeneration through the damaged sites has been researched for decades and has led to promising but primarily pre-clinical outcomes. However, few peripheral nerve conduits (PNCs) have been constructed from controllable biodegradable polymeric materials that can maintain their structural integrity or completely degrade during and after nerve regeneration respectively. In this work, a novel PNC candidate material was developed via the electrospinning of polyhydroxy butyrate/chitosan (PHB/CS) composite polymers. An SEM characterisation revealed the resultant PHB/CS nanofibres with 0, 1 and 2 wt/v% CS had less and smaller beads than the nanofibres at 3 wt/v% CS. The water contact angle (WCA) measurement demonstrated that the wettability of PHB/CS electrospun fibres was significantly improved by additional CS. Furthermore, both the thermogravimetric analysis (TGA) and differentiation scanning calorimetry (DSC) results showed that PHB/CS polymers can be blended in a single phase with a trifluoracetic solvent in all compositions. Besides, the reduction in the degradation temperature (from 286.9 to 229.9 °C) and crystallinity (from 81.0% to 52.1%) with increasing contents of CS were further proven. Moreover, we found that the degradability of the PHB/CS nanofibres subjected to different pH values rated in the order of acidic > alkaline > phosphate buffer solution (PBS). Based on these findings, it can be concluded that PHB/CS electrospun fibres with variable blending ratios may be used for designing PNCs with controlled biodegradability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Nanocomposite Films for Food Packaging · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials Discovery, Faculty of Mathematical Physical Sciences, University College London, 107 Roberts Building, Malet Place, London WC1E 7JE, UK

Spinal Repair Unit, Department of Brain Repair and Rehabilitation, UCL Institute of Neurology, Queen Square, London WC1N 3BG, UK

Department of Chemistry, Christopher Ingold Building, University College London (UCL), 20 Gordon Street, London WC1H 0AJ, UK

Centre for Medical Image Computing, University College London, London WC1V 6LJ, UK

References (28)

Show source-provided references
1. A comprehensive review summarizing the effect of electrospinning parameters and potential applications of nanofibers in biomedical and biotechnology10.1016/j.arabjc.2015.11.015 ↗
2. Fabrication of collagen-coated biodegradable polymer nanofiber mesh and its potential for endothelial cells growth10.1016/j.biomaterials.2005.05.049 ↗
3. Fabricating porous poly(lactic acid) fibres via electrospinning10.1016/j.eurpolymj.2017.12.025 ↗
4. Bangera, R., Correa, K., Lhorente, J.P., Figueroa, R., and Yáñez, J.M. (2017). Genomic predictions can accelerate selection for resistance against Piscirickettsia salmonis in Atlantic salmon (Salmo salar). BMC Genom., 18.10.1186/s12864-017-3487-y ↗
5. Use of extracellular medium chain length polyhydroxyalkanoate depolymerase for targeted binding of proteins to artificial poly [(3-hydroxyoctanoate)-co-(3-hydroxyhexanoate)] granules10.1021/bm9002859 ↗
6. PHBVHHx scaffolds loaded with umbilical cord-derived mesenchymal stem cells or hepatocyte-like cells differentiated from these cells for liver tissue engineering10.1016/j.msec.2014.09.022 ↗
7. Designing ideal conduits for peripheral nerve repair10.3171/FOC.2009.26.2.E5 ↗
8. Poly-3-hydroxybutyrate (PHB): A resorbable conduit for long-gap repair in peripheral nerves10.1054/bjps.2002.3798 ↗
9. Composite PHB-GGF conduit for long nerve gap repair: A long-term evaluation10.1080/02844310510006295 ↗
10. Chitosan—A versatile semi-synthetic polymer in biomedical applications10.1016/j.progpolymsci.2011.02.001 ↗
11. Moreira, J.B., Kuntzler, S.G., da Silva Vaz, B., da Silva, C.K., Costa, J.A.V., and de Morais, M.G. (2022). Polyhydroxybutyrate (PHB)-based blends and composites. Biodegradable Polymers, Blends and Composites, Elsevier.10.1016/B978-0-12-823791-5.00007-7 ↗
12. Chitosan-reinforced PHB hydrogel and aerogel monoliths fabricated by phase separation with the solvent-exchange method10.1016/j.carbpol.2022.119184 ↗
13. Chitosan–cross-linked nanofibrous PHBV nerve guide for rat sciatic nerve regeneration across a defect bridge10.1097/MAT.0b013e3182a79151 ↗
14. Biocompatible PCL/PLGA/polypyrrole composites for regenerating nerves10.1002/masy.201800028 ↗
15. Preparation and modeling of three-layered PCL/PLGA/PCL fibrous scaffolds for prolonged drug release10.1038/s41598-020-68117-9 ↗
16. Characterisation of PCL and PCL/PLA scaffolds for tissue engineering10.1016/j.procir.2013.01.022 ↗
17. The influence of the industrial processing on the degradation of poly (hidroxybutyrate)-PHB10.1590/S1516-14392012005000180 ↗
18. Production and evaluation of biodegradable composites based on PHB–PHV copolymer10.1016/S0142-9612(01)00394-5 ↗
19. Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: Fabrication and characterization10.1007/s10934-017-0385-2 ↗
20. Effects of multi-wall carbon nanotubes on structural and mechanical properties of poly(3-hydroxybutyrate)/chitosan electrospun scaffolds for cartilage tissue engineering10.1007/s12034-017-1479-9 ↗
21. Physical properties and degradability of PHB/chitosan blend films10.1046/j.1470-6431.2003.00308_45.x ↗
22. Effect of surface treatment on the biocompatibility of microbial polyhydroxyalkanoates10.1016/S0142-9612(01)00260-5 ↗
23. Feasibility study of an alkaline-based chemical treatment for the purification of polyhydroxybutyrate produced by a mixed enriched culture10.1186/s13568-015-0096-5 ↗
24. FTIR spectroscopy for analysis of crystallinity of poly(3-hydroxybutyrate-co-4 -hydroxybutyrate) polymers and its utilization in evaluation of aging, orientation and composition10.1016/j.polymertesting.2014.09.009 ↗
25. Crystallization behavior and environmental biodegradability of the blend films of poly (3-hydroxybutyric acid) with chitin and chitosan10.1016/S0144-8617(99)00105-8 ↗
26. Synthesis, structure and properties of polyhydroxyalkanoates: Biological polyesters10.1016/S0079-6700(00)00035-6 ↗
27. Kinetics and mechanism of the monomeric products from abiotic hydrolysis of poly[(R)-3-hydroxybutyrate] under acidic and alkaline conditions10.1016/j.polymdegradstab.2004.12.026 ↗
28. The Effect of Chitin Alkaline Deacetylation at Different Condition on Particle Properties10.1016/j.proche.2014.05.026 ↗