journal article·2022-12-08Open access

Investigation of Cell Adhesion and Cell Viability of the Endothelial and Fibroblast Cells on Electrospun PCL, PLGA and Coaxial Scaffolds for Production of Tissue Engineered Blood Vessel

Morteza Bazgir, Morvarid Saeinasab, Wei Zhang, Ximu Zhang, Ka Min Tsui, Abolfazl Maasoumi Sarvestani, Subhaan Nawaz, Phil Coates, Mansour Youseffi, Jacobo Elies, Farshid Sefat

Abstract

Endothelialization of artificial scaffolds is considered an effective strategy for increasing the efficiency of vascular transplantation. This study aimed to compare the biophysical/biocompatible properties of three different biodegradable fibrous scaffolds: Poly (ɛ-caprolactone) (PCL) alone, Poly Lactic-co-Glycolic Acid (PLGA) alone (both processed using Spraybase® electrospinning machine), and Coaxial scaffold where the fiber core and sheath was made of PCL and PLGA, respectively. Scaffold structural morphology was assessed by scanning electron microscope and tensile testing was used to investigate the scaffold tension resistance over time. Biocompatibility studies were carried out with human umbilical vein endothelial cells (HUVEC) and human vascular fibroblasts (HVF) for which cell viability (and cell proliferation over a 4-day period) and cell adhesion to the scaffolds were assessed by cytotoxicity assays and confocal microscopy, respectively. Our results showed that all biodegradable polymeric scaffolds are a reliable host to adhere and promote proliferation in HUVEC and HVF cells. In particular, PLGA membranes performed much better adhesion and enhanced cell proliferation compared to control in the absence of polymers. In addition, we demonstrate here that these biodegradable membranes present improved mechanical properties to construct potential tissue-engineered vascular graft.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical and Electronics Engineering, School of Engineering, University of Bradford, Bradford BD7 1DP, UK

Department of Biology, Faculty of Science, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran

State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China

Advanced Polymer Materials Research Centre, Sichuan University, Shishi 362700, China

Chongqing Key Laboratory of Oral Disease and Biomedical Sciences and Chongqing Municipal Key Laboratory of Oral Biomedical Engineering of Higher Education, Stomatological Hospital of Chongqing Medical University, Chongqing 401174, China

Interdisciplinary Research Centre in Polymer Science and Technology (Polymer IRC), University of Bradford, Bradford BD7 1DP, UK

School of Pharmacy and Medical Sciences, Faculty of Life Sciences, University of Bradford, Bradford BD7 1DP, UK

References (61)

Show source-provided references
1. Recherches expérimentales sur la suture et la greffe artérielles
2. Murphy, J.B. (1897). Resection of Arteries and Veins Injured in Continuity--End-to-End Suture: Experimental and Clinical Research, Publishers Printing Company.
3. The use of tubes constructed from vinyon “N” cloth in bridging arterial defects: A preliminary report10.1097/00000658-195203000-00006 ↗
4. The use of expanded microporous polytetrafluoroethylene for limb salvage: A preliminary report
5. A new venous prosthesis
6. Expanded polytetrafluoroethylene graft fistula for chronic hemodialysis10.1097/00000658-197901000-00019 ↗
7. Clinical application of a new flexible knitted Dacron arterial substitute
8. Readily available tissue-engineered vascular grafts10.1126/scitranslmed.3001426 ↗
9. Improved cell adhesion by plasma-induced grafting of L-lactide onto polyurethane surface10.1016/S0142-9612(99)00191-X ↗
10. Synthesis, surface, and cell-adhesion properties of polyurethanes containing covalently grafted RGD-peptides10.1002/jbm.820280307 ↗
11. In situ immobilization of proteins and RGD peptide on polyurethane surfaces via poly (ethylene oxide) coupling polymers for human endothelial cell growth10.1021/bm0255950 ↗
12. Photoimmobilisation of poly (N-vinylpyrrolidinone) as a means to improve haemocompatibility of polyurethane biomaterials10.1016/S0142-9612(99)00067-8 ↗
13. A composite chitosan-gelatin bi-layered, biomimetic macroporous scaffold for blood vessel tissue engineering10.1016/j.carbpol.2016.09.095 ↗
14. An assessment of biopolymer-and synthetic polymer-based scaffolds for bone and vascular tissue engineering10.1002/pi.4474 ↗
15. Electrospinning: A fascinating method for the preparation of ultrathin fibers10.1002/anie.200604646 ↗
16. Electrospinning of collagen nanofibers10.1021/bm015533u ↗
17. Rabionet, M., Yeste, M., Puig, T., and Ciurana, J. (2017). Electrospinning PCL scaffolds manufacture for three-dimensional breast cancer cell culture. Polymers, 9.10.3390/polym9080328 ↗
18. Electrospun PLLA nanofiber scaffolds for bladder smooth muscle reconstruction10.1007/s11255-016-1259-2 ↗
19. In vitro degradation behavior of electrospun polyglycolide, polylactide, and poly (lactide-co-glycolide)10.1002/app.21116 ↗
20. Micro/nano multilayered scaffolds of PLGA and collagen by alternately electrospinning for bone tissue engineering10.1186/s11671-016-1532-4 ↗
21. Electrospun fibrinogen–PLA nanofibres for vascular tissue engineering10.1002/term.2172 ↗
22. Bazgir, M., Zhang, W., Zhang, X., Elies, J., Saeinasab, M., Coates, P., Youseffi, M., and Sefat, F. (2021). Fabrication and characterization of PCL/PLGA coaxial and bilayer fibrous scaffolds for tissue engineering. Materials, 14.10.3390/ma14216295 ↗
23. Bazgir, M., Zhang, W., Zhang, X., Elies, J., Saeinasab, M., Coates, P., Youseffi, M., and Sefat, F. (2021). Degradation and characterisation of electrospun polycaprolactone (PCL) and poly (lactic-co-glycolic acid)(PLGA) scaffolds for vascular tissue engineering. Materials, 14.10.3390/ma14174773 ↗
24. Biodegradable polymer scaffolds for tissue engineering
25. The effect of cross-linking on the microstructure, mechanical properties and biocompatibility of electrospun polycaprolactone–gelatin/PLGA–gelatin/PLGA–chitosan hybrid composite10.1088/1468-6996/13/3/035002 ↗
26. Design and preparation of polymeric scaffolds for tissue engineering10.1586/17434440.3.6.835 ↗
27. Human tissue-engineered blood vessels for adult arterial revascularization10.1038/nm1364 ↗
28. Transplantation of a tissue-engineered pulmonary artery10.1056/NEJM200102153440717 ↗
29. Polymeric scaffolds in tissue engineering application: A review10.1155/2011/290602 ↗
30. Electrospinning of collagen/biopolymers for regenerative medicine and cardiovascular tissue engineering10.1016/j.addr.2009.07.012 ↗
31. Biomaterials in the development and future of vascular grafts10.1067/mva.2003.88 ↗
32. Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review10.1016/j.jconrel.2011.09.064 ↗
33. Advances in three-dimensional nanofibrous macrostructures via electrospinning10.1016/j.progpolymsci.2013.06.002 ↗
34. Liverani, L., and Boccaccini, A.R. (2016). Versatile production of poly (epsilon-caprolactone) fibers by electrospinning using benign solvents. Nanomaterials, 6.10.3390/nano6040075 ↗
35. In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method10.1016/j.biomaterials.2006.11.024 ↗
36. Enhanced intimal thickening of expanded polytetrafluoroethylene grafts coated with fibrin or fibrin-releasing vascular endothelial growth factor in the pig carotid artery interposition model10.1016/j.jtcvs.2007.01.029 ↗
37. Poly (lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold10.1002/bit.21093 ↗
38. Small-diameter vascular graft using co-electrospun composite PCL/PU nanofibers10.1088/1748-605X/aad4b5 ↗
39. Functional arteries grown in vitro10.1126/science.284.5413.489 ↗
40. Ardila, D.C., Liou, J.-J., Maestas, D., Slepian, M.J., Badowski, M., Wagner, W.R., Harris, D., and Vande Geest, J.P. (2019). Surface modification of electrospun scaffolds for endothelialization of tissue-engineered vascular grafts using human cord blood-derived endothelial cells. J. Clin. Med., 8.10.3390/jcm8020185 ↗
41. Vascular tissue engineering: Fabrication and characterization of acetylsalicylic acid-loaded electrospun scaffolds coated with amniotic membrane lysate10.1002/jcp.28266 ↗
42. Endothelium in hemostasis and thrombosis10.1016/S0033-0620(97)80032-1 ↗
43. Viability, proliferation and adhesion of smooth muscle cells and human umbilical vein endothelial cells on electrospun polymer scaffolds10.3233/CH-2011-1447 ↗
44. Blended PCL/PLGA scaffold fabrication using multi-head deposition system10.1016/j.mee.2008.11.026 ↗
45. Characterization of anterior cruciate ligament cells and bone marrow stromal cells on various biodegradable polymeric films10.1016/S0928-4931(02)00014-0 ↗
46. Thrombomodulin as a model of molecular mechanisms that modulate protease specificity and function at the vessel surface10.1096/fasebj.9.10.7615164 ↗
47. Acceleration of thrombin-antithrombin complex formation in rat hindquarters via heparinlike molecules bound to the endothelium10.1172/JCI111429 ↗
48. Endothelial cell function and thrombosis10.1053/beha.1999.0028 ↗
49. The role of vascular smooth muscle cells in the physiology and pathophysiology of blood vessels
50. Functional small-diameter neovessels created using endothelial progenitor cells expanded ex vivo10.1038/nm0901-1035 ↗
51. Vascular smooth muscle enhances functionality of tissue-engineered blood vessels in vivo10.1016/j.jvs.2010.07.054 ↗
52. Surface roughness, porosity, and texture as modifiers of cellular adhesion10.1089/ten.1996.2.241 ↗
53. Neovascularization of poly (ether ester) block-copolymer scaffolds in vivo: Long-term investigations using intravital fluorescent microscopy10.1002/jbm.a.20016 ↗
54. Influence of fibre diameter and orientation of electrospun copolyetheresterurethanes on smooth muscle and endothelial cell behaviour10.3233/CH-131787 ↗
55. Strohbach, A., Begunk, R., Petersen, S., Felix, S.B., Sternberg, K., and Busch, R. (2016). Biodegradable polymers influence the effect of atorvastatin on human coronary artery cells. Int. J. Mol. Sci., 17.10.3390/ijms17020148 ↗
56. Preparation and characterization of coaxial electrospun thermoplastic polyurethane/collagen compound nanofibers for tissue engineering applications10.1016/j.colsurfb.2010.03.043 ↗
57. Coaxial electrospun PCL/Gelatin-MA fibers as scaffolds for vascular tissue engineering10.1016/j.colsurfb.2017.07.065 ↗
58. Recent applications of coaxial and emulsion electrospinning methods in the field of tissue engineering10.1089/biores.2016.0022 ↗
59. Electrospun fibrous membranes of poly (lactic-co-glycolic acid) with β-tricalcium phosphate for guided bone regeneration application10.1016/j.polymertesting.2020.106489 ↗
60. Electrospun aligned PLGA and PLGA/gelatin nanofibers embedded with silica nanoparticles for tissue engineering10.1016/j.ijbiomac.2015.05.050 ↗
61. Selvakumaran, J., and Jell, G. (2005). A guide to basic cell culture and applications in biomaterials and tissue engineering. Trends in Biomaterials & Artificial Organs, Elsevier.10.1201/9780203024065.ch20 ↗