journal article·2023-08-05Open access

Fabrication and Characterization of Electrospun Chitosan/Polylactic Acid (CH/PLA) Nanofiber Scaffolds for Biomedical Application

Yevhen Samokhin, Yuliia Varava, Kateryna Diedkova, Ilya Yanko, Yevheniia Husak, Julia Radwan-Pragłowska, Oksana Pogorielova, Łukasz Janus, Maksym Pogorielov, Viktoriia Korniienko

Abstract

The present study demonstrates a strategy for preparing porous composite fibrous materials with superior biocompatibility and antibacterial performance. The findings reveal that the incorporation of PEG into the spinning solutions significantly influences the fiber diameters, morphology, and porous area fraction. The addition of a hydrophilic homopolymer, PEG, into the Ch/PLA spinning solution enhances the hydrophilicity of the resulting materials. The hybrid fibrous materials, comprising Ch modified with PLA and PEG as a co-solvent, along with post-treatment to improve water stability, exhibit a slower rate of degradation (stable, moderate weight loss over 16 weeks) and reduced hydrophobicity (lower contact angle, reaching 21.95 ± 2.17°), rendering them promising for biomedical applications. The antibacterial activity of the membranes is evaluated against Staphylococcus aureus and Escherichia coli, with PEG-containing samples showing a twofold increase in bacterial reduction rate. In vitro cell culture studies demonstrated that PEG-containing materials promote uniform cell attachment, comparable to PEG-free nanofibers. The comprehensive evaluation of these novel materials, which exhibit improved physical, chemical, and biological properties, highlights their potential for biomedical applications in tissue engineering and regenerative medicine.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomedical Research Centre, Sumy State University, R-Korsakova Street, 40007 Sumy, Ukraine

Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland

Institute of Atomic Physics and Spectroscopy, University of Latvia, Jelgavas Iela 3, LV-1004 Riga, Latvia

Faculty of Chemical Engineering and Technology, Cracow University of Technology, Warszawska 24 Street, 31-155 Cracow, Poland

Funding

HORIZON-MSCA-2021-SE-01-01 (Nr 101086441, ARGO) · ERA-NET JPIAMR-ACTION JTC 2022 · Latvian-Ukrainian Joint Program of Scientific and Technological Cooperation

References (56)

Show source-provided references
1. A brief review of electrospinning of polymer nanofibers: History and main applications10.14447/jnmes.v23i3.a01 ↗
2. A Review: Electrospinning and Electrospinning Nanofibre Technology, Process & Application10.38124/IJISRT20JUN521 ↗
3. Silk Fibroin Combined with Electrospinning as a Promising Strategy for Tissue Regeneration10.1002/mabi.202200380 ↗
4. Ji, G., Chen, Z., Li, H., Awuye, D.E., Guan, M., and Zhu, Y. (2022). Electrospinning-Based Biosensors for Health Monitoring. Biosensors, 12.10.3390/bios12100876 ↗
5. Electrospinning of Fluorinated Polymers: Current State of the Art on Processes and Applications10.1080/15583724.2022.2067868 ↗
6. Antibacterial and physical effects of cationic starch nanofibers containing carvacrol@casein nanoparticles against Bacillus cereus in soy products10.1016/j.ijfoodmicro.2022.109530 ↗
7. Porous PLGA-PEG nerve conduit decorated with oriented electrospun chitosan-RGD nanofibre10.1016/j.jmrt.2021.07.117 ↗
8. A critical analysis on parameters affecting the formation of nano fibers using electrospinning technique10.14445/22315381/IJETT-V69I1P220 ↗
9. Experimental investigation of process parameters for the filtration property of nanofiber membrane fabricated by needleless electrospinning apparatus10.1177/1528083720901357 ↗
10. Fibrous structures fabricated from polylactic acid and nanofibrillated chitosan/zinc oxide nanoparticles
11. Maliszewska, I., and Czapka, T. (2022). Electrospun Polymer Nanofibers with Antimicrobial Activity. Polymers, 14.10.3390/polym14091661 ↗
12. Electrospun nanofibers as versatile platform in antimicrobial delivery: Current state and perspectives10.1080/10837450.2019.1656238 ↗
13. Preparation, Characterization, and Antimicrobial and Antiviral Properties of Silver-Containing Nanocomposites Based on Polylactic Acid–Chitosan10.1021/acsabm.2c00034 ↗
14. Preparation of PLA/chitosan nanoscaffolds containing cod liver oil and experimental diabetic wound healing in male rats study10.1186/s12951-020-00737-9 ↗
15. Osman, M.A., Virgilio, N., Rouabhia, M., and Mighri, F. (2022). Development and Characterization of Functional Polylactic Acid/Chitosan Porous Scaffolds for Bone Tissue Engineering. Polymers, 14.10.3390/polym14235079 ↗
16. Recent Developments in Electrospun Nanofibers as Delivery of Phytoconstituents for Wound Healing10.3390/ddc2010010 ↗
17. Preparation and application of chitosan-based medical electrospun nanofibers10.1016/j.ijbiomac.2022.12.056 ↗
18. Parham, S., Kharazi, A.Z., Bakhsheshi-Rad, H.R., Ghayour, H., Ismail, A.F., Nur, H., and Berto, F. (2020). Electrospun Nanofibers for biomedical and tissue engineering applications: A comprehensive review. Materials, 13.10.3390/ma13092153 ↗
19. Fabrication and Characterization of Antibacterial Suture Yarns Containing PLA/Tetracycline Hydrochloride-PVA/Chitosan Nanofibers10.1007/s12221-022-4685-z ↗
20. Electrospun chitosan nanofibers for wound healing application
21. A fundamental study of chitosan/PEO electrospinning10.1016/j.polymer.2011.08.034 ↗
22. Development of cell adhesive and inherently antibacterial polyvinyl alcohol/polyethylene oxide nanofiber scaffolds via incorporating chitosan for tissue engineering10.1016/j.ijbiomac.2023.124004 ↗
23. Strength, Water Absorption, Thermal and Antimicrobial Properties of a Biopolymer Composite Wound Dressing
24. Capuana, E., Lopresti, F., Ceraulo, M., and La Carrubba, V. (2022). Poly-L-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications. Polymers, 14.10.3390/polym14061153 ↗
25. Deng, A., Yang, Y., and Du, S. (2021). Tissue engineering 3D porous scaffolds prepared from electrospun recombinant human collagen (Rhc) polypeptides/chitosan nanofibers. Appl. Sci., 11.10.3390/app11115096 ↗
26. Mania, S., Partyka, K., Pilch, J., Augustin, E., Cieślik, M., Ryl, J., Jinn, J.-R., Wang, Y.-J., Michałowska, A., and Tylingo, R. (2019). Obtaining and characterization of the PLA/chitosan foams with antimicrobial properties achieved by the emulsification combined with the dissolution of chitosan by CO2 saturation. Molecules, 24.10.3390/molecules24244532 ↗
27. Morariu, S., Brunchi, C.E., Honciuc, M., and Iftime, M.M. (2023). Development of Hybrid Materials Based on Chitosan, Poly(Ethylene Glycol) and Laponite® RD: Effect of Clay Concentration. Polymers, 15.10.3390/polym15040841 ↗
28. Novel bi-layered dressing patches constructed with radially-oriented nanofibrous pattern and herbal compound-loaded hydrogel for accelerated diabetic wound healing10.1016/j.apmt.2022.101542 ↗
29. Biodegradable gemcitabine-loaded microdevice with sustained local drug delivery and improved tumor recurrence inhibition abilities for postoperative pancreatic tumor treatment10.1080/10717544.2022.2075984 ↗
30. PEGylation of chitosan for improved solubility and fiber formation via electrospinning10.1007/s10570-007-9122-3 ↗
31. Batch Preparation and Characterization of Electrospun Porous Polylactic Acid-Based Nanofiber Membranes for Antibacterial Wound Dressing10.1007/s42765-022-00141-y ↗
32. Chitosan/PEO nanofibers electrospun on metallized track-etched membranes: Fabrication and characterization10.1016/j.mtchem.2020.100416 ↗
33. Preparation and characterization of blend film based on chitosan-poly lactic acid (PLA) composites10.1063/5.0062267 ↗
34. Microfluidic formulation of lipid/polymer hybrid nanoparticles for plasmid DNA (pDNA) delivery10.1016/j.ijpharm.2022.122223 ↗
35. Quantification of the pore size distribution (porosity profiles) in microfiltration membranes by SEM, TEM and computer image analysis10.1016/j.memsci.2008.05.057 ↗
36. Ignatova, M., Anastasova, I., Manolova, N., Rashkov, I., Markova, N., Kukeva, R., Stoyanova, R., Georgieva, A., and Toshkova, R. (2022). Bio-Based Electrospun Fibers from Chitosan Schiff Base and Polylactide and Their Cu2+ and Fe3+ Complexes: Preparation and Antibacterial and Anticancer Activities. Polymers, 14.10.3390/polym14225002 ↗
37. Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N.D., Christodoulou, E., Koumentakou, I., and Karavas, E. (2022). Poly(Lactic Acid)-Based Microparticles for Drug Delivery Applications: An Overview of Recent Advances. Pharmaceutics, 14.10.3390/pharmaceutics14020359 ↗
38. Antibacterial electrospun chitosan-based nanofibers: A bacterial membrane perforator10.1002/fsn3.468 ↗
39. Tetracycline hydrochloride-loaded electrospun nanofibers mats based on PVA and chitosan for wound dressing10.1016/j.msec.2017.03.199 ↗
40. Korniienko, V., Husak, Y., Radwan-Pragłowska, J., Holubnycha, V., Samokhin, Y., Yanovska, A., Varava, J., Diedkova, K., Janus, Ł., and Pogorielov, M. (2022). Impact of Electrospinning Parameters and Post-Treatment Method on Antibacterial and Antibiofilm Activity of Chitosan Nanofibers. Molecules, 27.10.3390/molecules27103343 ↗
41. Functional and biological characterization of chitosan electrospun nanofibrous membrane nucleated with silver nanoparticles10.1007/s13204-021-01808-5 ↗
42. Biological behaviour of chitosan electrospun nanofibrous membranes after different neutralisation methods
43. Preparation of chitosan/PLA blend micro/nanofibers by electrospinning10.1016/j.matlet.2008.12.014 ↗
44. Sukum, P., Punyodom, W., Dangtip, S., Poramapijitwat, P., Daranarong, D., Jenvoraphot, T., Nisoa, M., Kuensaen, C., and Boonyawan, D. (2023). Argon Plasma Jet-Treated Poly (Vinyl Alcohol)/Chitosan and PEG 400 Plus Mangifera indica Leaf Extract for Electrospun Nanofiber Membranes: In Vitro Study. Polymers, 15.10.3390/polym15112559 ↗
45. Increasing surface hydrophilicity in poly(lactic acid) electrospun fibers by addition of Pla-B-Peg copolymers
46. Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration10.1016/j.matdes.2021.110066 ↗
47. Fabrication and characterization of nanofibers based on poly(lactic acid)/chitosan blends by electrospinning and their functionalization with phospholipase A110.1007/s12221-017-6953-x ↗
48. Electrospun antibacterial nanofibers: Production, activity, and in vivo applications10.1002/app.40797 ↗
49. Antibacterial PLA/PEG electrospun fibers: Comparative study between grafting and blending PEG10.1016/j.eurpolymj.2015.12.019 ↗
50. Aijaz, M.O., Yang, S.B., Karim, M.R., Othman, M.H.D., and Alnaser, I.A. (2023). Preparation and Characterization of Poly(Lactic Acid)/Poly (ethylene glycol)-Poly(propyl glycol)-Poly(ethylene glycol) Blended Nanofiber Membranes for Fog Collection. Membranes, 13.10.3390/membranes13010054 ↗
51. Kaplan, J.B., Mlynek, K.D., Hettiarachchi, H., Alamneh, Y.A., Biggemann, L., Zurawski, D.V., Black, C.C., Bane, C.E., Kim, R.K., and Granick, M.S. (2018). Extracellular polymeric substance (EPS)-degrading enzymes reduce staphylococcal surface attachment and biocide resistance on pig skin in vivo. PLoS ONE, 13.10.1371/journal.pone.0205526 ↗
52. Liu, C., Du, G., Guo, Q., Li, R., Li, C., and He, H. (2023). Fabrication and Characterization of Polylactic Acid Electrospun Wound Dressing Modified with Polyethylene Glycol, Rosmarinic Acid and Graphite Oxide. Nanomaterials, 13.10.3390/nano13132000 ↗
53. The effect of molecular weight and content of PEG on in vitro drug release of electrospun curcumin loaded PLA/PEG nanofibers10.1016/j.jddst.2020.101554 ↗
54. Preparation of poly(ethylene glycol)/polylactide hybrid fibrous scaffolds for bone tissue engineering10.2147/IJN.S25297 ↗
55. Li, H., Wang, Z., Zhang, H., and Pan, Z. (2018). Nanoporous PLA/(Chitosan Nanoparticle) composite fibrous membranes with excellent air filtration and antibacterial per-formance. Polymers, 10.10.3390/polym10101085 ↗
56. Maleki, H., Azimi, B., Ismaeilimoghadam, S., and Danti, S. (2022). Poly(lactic acid)-Based Electrospun Fibrous Structures for Biomedical Applications. Appl. Sci., 12.10.3390/app12063192 ↗