journal article·2022-09-23Open access

Polycaprolactone-Based 3D-Printed Scaffolds as Potential Implant Materials for Tendon-Defect Repair

Merle Kempfert, Elmar Willbold, Sebastian Loewner, Cornelia Blume, Johannes Pitts, Henning Menzel, Yvonne Roger, Andrea Hoffmann, Nina Angrisani, Janin Reifenrath

Abstract

Chronic tendon ruptures are common disorders in orthopedics. The conventional surgical methods used to treat them often require the support of implants. Due to the non-availability of suitable materials, 3D-printed polycaprolactone (PCL) scaffolds were designed from two different starting materials as suitable candidates for tendon-implant applications. For the characterization, mechanical testing was performed. To increase their biocompatibility, the PCL-scaffolds were plasma-treated and coated with fibronectin and collagen I. Cytocompatibility testing was performed using L929 mouse fibroblasts and human-bone-marrow-derived mesenchymal stem cells. The mechanical testing showed that the design adaptions enhanced the mechanical stability. Cell attachment was increased in the plasma-treated specimens compared to the control specimens, although not significantly, in the viability tests. Coating with fibronectin significantly increased the cellular viability compared to the untreated controls. Collagen I treatment showed an increasing trend. The desired cell alignment and spread between the pores of the construct was most prominent on the collagen-I-coated specimens. In conclusion, 3D-printed scaffolds are possible candidates for the development of tendon implants. Enhanced cytocompatibility was achieved through surface modifications. Although adaptions in mechanical strength still require alterations in order to be applied to human-tendon ruptures, we are optimistic that a suitable implant can be designed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tendon Structure and Treatment · Orthopedic Surgery and Rehabilitation · Cellular Mechanics and Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hannover Medical School, Clinic for Orthopaedic Surgery, Anna-Von-Borries-Str. 1–7, 30625 Hannover, Germany

German Cancer Research Center, Center for Preclinical Research, Im Neuenheimer Feld 280, 69120 Heidelberg, Germany

Hannover Medical School, Lower Saxony Centre for Biomedical Engineering, Implant Research and Development (NIFE), Stadtfelddamm 34, 30625 Hannover, Germany

Institute of Technical Chemistry, Leibniz University Hannover, Callinstraße 5, 30167 Hannover, Germany

Institute for Technical Chemistry, Braunschweig University of Technology, Hagenring 30, 38106 Braunschweig, Germany

Funding

German Research Foundation (DFG)

References (53)

Show source-provided references
1. Histology of tendon and enthesis—Suitable techniques for specific research questions10.22203/eCM.v043a16 ↗
2. Biology of tendon injury: Healing, modeling and remodeling
3. The biology of rotator cuff healing10.1016/j.otsr.2016.11.003 ↗
4. Factors predicting rotator cuff retears: An analysis of 1000 consecutive rotator cuff repairs10.1177/0363546514525336 ↗
5. Long-term Results After Arthroscopic Repair of Isolated Subscapularis Tears10.1177/0363546516676261 ↗
6. The return of a forgotten polymer—Polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
7. Biodegradable poly-epsilon-caprolactone (PCL) for tissue engineering applications: A review
8. Preparation and characterization of poly(ε-caprolactone) scaffolds modified with cell-loaded fibrin gel10.1016/j.ijbiomac.2018.12.036 ↗
9. Polycaprolactone as biomaterial for bone scaffolds: Review of literature10.1016/j.jobcr.2019.10.003 ↗
10. Nonwoven-based gelatin/polycaprolactone membrane loaded with ERK inhibitor U0126 for treatment of tendon defects10.1186/s13287-021-02679-x ↗
11. Fiber-aligned polymer scaffolds for rotator cuff repair in a rat model10.1016/j.jse.2011.10.021 ↗
12. Histopathological and immunohistochemical evaluation of cellular response to a woven and electrospun polydioxanone (PDO) and polycaprolactone (PCL) patch for tendon repair10.1038/s41598-020-61725-5 ↗
13. Research Progress of Biodegradable Polymers in Repairing Achilles Tendon Injury10.3389/fmats.2022.815930 ↗
14. Orthopaedic regenerative tissue engineering en route to the holy grail: Disequilibrium between the demand and the supply in the operating room10.1186/s40634-018-0133-9 ↗
15. Possibilities and limitations of electrospun chitosan-coated polycaprolactone grafts for rotator cuff tear repair10.1002/term.2985 ↗
16. Enhanced adhesion and differentiation of human mesenchymal stem cell inside apatite-mineralized/poly(dopamine)-coated poly(ε-caprolactone) scaffolds by stereolithography10.1039/C6TB01377E ↗
17. Reifenrath, J., Wellmann, M., Kempfert, M., Angrisani, N., Welke, B., Gniesmer, S., Kampmann, A., Menzel, H., and Willbold, E. (2020). TGF–β3 Loaded Electrospun Polycaprolacton Fibre Scaffolds for Rotator Cuff Tear Repair: An in Vivo Study in Rats. Int. J. Mol. Sci., 21.10.3390/ijms21031046 ↗
18. 3D bioprinting of tissues and organs10.1038/nbt.2958 ↗
19. Solid Free-form Fabrication Technology and Its Application to Bone Tissue Engineering10.15283/ijsc.2010.3.2.85 ↗
20. 3D-Printed PCL Scaffolds for the Cultivation of Mesenchymal Stem Cells
21. Polycaprolactone-based biomaterials for tissue engineering and drug delivery: Current scenario and challenges10.1080/00914037.2015.1103241 ↗
22. Towards a methodology for the effective surface modification of porous polymer scaffolds10.1016/j.biomaterials.2005.05.078 ↗
23. Design, fabrication and characterization of PCL electrospun scaffolds—a review10.1039/c0jm04502k ↗
24. Teske, M. (2013). Nass- und Plasmachemische Oberflächenmodifizierung Biodegradierbarer, Polymerer Implantatwerkstoffe unter Immobilisierung von Wirkstoffen zur Optimierung der Zelle-Implantat-Interaktion. [Ph.D. Thesis, Rostock University Medical Center].
25. Nanoscale engineering of biomimetic surfaces: Cues from the extracellular matrix10.1007/s00441-009-0896-5 ↗
26. Sternberg, K. (2008). Funktionalisierte, Degradierbare Polymerbeschichtungen zur Lokalen Freisetzung von Wirkstoffen—Entwicklung und Charakterisierung von Drug-Eluting Stents für Verschiedene Medizinische Indikationen. [Habilitation Thesis, Rostock University Medical Center].
27. Blending chitosan-g-poly(caprolactone) with poly(caprolactone) by electrospinning to produce functional fiber mats for tissue engineering applications10.1002/app.48650 ↗
28. Impact of sterilization by electron beam, gamma radiation and X-rays on electrospun poly-(ε-caprolactone) fiber mats10.1007/s10856-019-6245-7 ↗
29. Fricke, D., Becker, A., Jütte, L., Bode, M., de Cassan, D., Wollweber, M., Glasmacher, B., and Roth, B. (2019). Mueller Matrix Measurement of Electrospun Fiber Scaffolds for Tissue Engineering. Polymers, 11.10.3390/polym11122062 ↗
30. Surface tensiometry of phase separated protein and polymer droplets by the sessile drop method10.1039/D0SM01319F ↗
31. Yang, X., Wang, Y., Zhou, Y., Chen, J., and Wan, Q. (2021). The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering. Polymers, 13.10.3390/polym13162754 ↗
32. 3D printing of multilayered scaffolds for rotator cuff tendon regeneration
33. Fabrication and characterization of porous polycaprolactone scaffold via extrusion-based cryogenic 3D printing for tissue engineering10.1016/j.matdes.2019.107946 ↗
34. Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration—A pilot study in vitro10.1186/s12903-019-0717-5 ↗
35. Großhaus, C., Bakirci, E., Berthel, M., Hrynevich, A., Kade, J.C., Hochleitner, G., Groll, J., and Dalton, P.D. (2020). Melt Electrospinning of Nanofibers from Medical-Grade Poly(ε-Caprolactone) with a Modified Nozzle. Small, 16.10.1002/smll.202003471 ↗
36. Cytotoxicity Evaluation of Endodontic Pins on L929 Cell Line10.1155/2019/3469525 ↗
37. Test conditions can significantly affect the results of in vitro cytotoxicity testing of degradable metallic biomaterials10.1038/s41598-021-85019-6 ↗
38. Improved cytotoxicity testing of magnesium materials10.1016/j.mseb.2011.04.008 ↗
39. High Modulus Biodegradable Polyurethanes for Vascular Stents: Evaluation of Accelerated in vitro Degradation and Cell Viability of Degradation Products10.3389/fbioe.2015.00052 ↗
40. Wang, W., Caetano, G., Ambler, W.S., Blaker, J.J., Frade, M.A., Mandal, P., Diver, C., and Bártolo, P. (2016). Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering. Materials, 9.10.3390/ma9120992 ↗
41. Miroshnichenko, S., Timofeeva, V., Permyakova, E., Ershov, S., Kiryukhantsev-Korneev, P., Dvořaková, E., Shtansky, D.V., Zajíčková, L., Solovieva, A., and Manakhov, A. (2019). Plasma-Coated Polycaprolactone Nanofibers with Covalently Bonded Platelet-Rich Plasma Enhance Adhesion and Growth of Human Fibroblasts. Nanomaterials, 9.10.3390/nano9040637 ↗
42. Accelerated differentiation of osteoblast cells on polycaprolactone scaffolds driven by a combined effect of protein coating and plasma modification10.1088/1758-5082/2/1/014109 ↗
43. Coating 3D Printed Polycaprolactone Scaffolds with Nanocellulose Promotes Growth and Differentiation of Mesenchymal Stem Cells10.1021/acs.biomac.8b01194 ↗
44. Effect of Preadsorbed Proteins on Cell Adhesion to Polymer Surfaces10.1006/jcis.1993.1044 ↗
45. Surface Modification of 3D Printed Polycaprolactone Constructs via a Solvent Treatment: Impact on Physical and Osteogenic Properties
46. Chondrogenic differentiation of mesenchymal stem cells embedded in a scaffold by long-term release of TGF-β3 complexed with chondroitin sulfate
47. Fabrication and surface modification of macroporous poly(L-lactic acid) and poly(L-lactic-co-glycolic acid) (70/30) cell scaffolds for human skin fibroblast cell culture10.1002/jbm.10318 ↗
48. Nandakumar, A., Barradas, A., de Boer, J., Moroni, L., Van Blitterswijk, C., and Habibovic, P. (2013). Combining technologies to create bioactive hybrid scaffolds for bone tissue engineering. Biomatter, 3.10.4161/biom.23705 ↗
49. Fibronectin-coating enhances attachment and proliferation of mesenchymal stem cells on a polyurethane meniscal scaffold10.1016/j.reth.2021.11.001 ↗
50. Development of fibronectin-loaded nanofiber scaffolds for guided pulp tissue regeneration10.1002/jbm.b.34785 ↗
51. A 3D-Printed PLCL Scaffold Coated with Collagen Type I and Its Biocompatibility10.1155/2018/5147156 ↗
52. Ultimate Tensile Failure Loads of a Human Dermal Allograft Rotator Cuff Augmentation10.1016/j.arthro.2007.07.013 ↗
53. Reinforcement of electrospun membranes using nanoscale Al2O3 whiskers for improved tissue scaffolds10.1002/jbm.a.34027 ↗