journal article·2023-08-17Open access

Polyether-Ether-Ketone (PEEK) and Its 3D-Printed Quantitate Assessment in Cranial Reconstruction

Khaja Moiduddin, Syed Hammad Mian, Sherif Mohammed Elseufy, Hisham Alkhalefah, Sundar Ramalingam, Abdul Sayeed

Abstract

Three-dimensional (3D) printing, medical imaging, and implant design have all advanced significantly in recent years, and these developments may change how modern craniomaxillofacial surgeons use patient data to create tailored treatments. Polyether-ether-ketone (PEEK) is often seen as an attractive option over metal biomaterials in medical uses, but a solid PEEK implant often leads to poor osseointegration and clinical failure. Therefore, the objective of this study is to demonstrate the quantitative assessment of a custom porous PEEK implant for cranial reconstruction and to evaluate its fitting accuracy. The research proposes an efficient process for designing, fabricating, simulating, and inspecting a customized porous PEEK implant. In this study, a CT scan is utilized in conjunction with a mirrored reconstruction technique to produce a skull implant. In order to foster cell proliferation, the implant is modified into a porous structure. The implant’s strength and stability are examined using finite element analysis. Fused filament fabrication (FFF) is utilized to fabricate the porous PEEK implants, and 3D scanning is used to test its fitting accuracy. The results of the biomechanical analysis indicate that the highest stress observed was approximately 61.92 MPa, which is comparatively low when compared with the yield strength and tensile strength of the material. The implant fitting analysis demonstrates that the implant’s variance from the normal skull is less than 0.4436 mm, which is rather low given the delicate anatomy of the area. The results of the study demonstrate the implant’s endurance while also increasing the patient’s cosmetic value.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Anatomy and Medical Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Manufacturing Institute, King Saud University, Riyadh 11421, Saudi Arabia

Department of Oral and Maxillofacial Surgery, College of Dentistry and Dental University Hospital, King Saud University Medical City, Riyadh 11545, Saudi Arabia

Department of Mechanical Engineering, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia

Funding

Deputyship for Research & Innovation, “Ministry of Education” in Saudi Arabia

References (77)

Show source-provided references
1. Outcome in Patient-Specific PEEK Cranioplasty: A Two-Center Cohort Study of 40 Implants10.1016/j.jcms.2016.07.005 ↗
2. Cranial Reconstruction with a Custom-Made Implant
3. A Treatment Algorithm for Patients with Large Skull Bone Defects and First Results10.1016/j.jcms.2010.10.003 ↗
4. Calvarial Reconstruction with Polyetheretherketone Implants10.1097/SAP.0b013e318184abc7 ↗
5. Materials Used in Cranioplasty: A History and Analysis10.3171/2014.2.FOCUS13561 ↗
6. 3D Printing of Bone Scaffolds with Hybrid Biomaterials10.1016/j.compositesb.2018.09.065 ↗
7. Farber, E., Orlov, A., Borisov, E., Repnin, A., Kuzin, S., Golubkov, N., and Popovich, A. (2022). TiNi Alloy Lattice Structures with Negative Poisson’s Ratio: Computer Simulation and Experimental Results. Metals, 12.10.3390/met12091476 ↗
8. PEEK Biomaterials in Trauma, Orthopedic, and Spinal Implants10.1016/j.biomaterials.2007.07.013 ↗
9. Kang, J., Zheng, J., Hui, Y., and Li, D. (2022). Mechanical Properties of 3D-Printed PEEK/HA Composite Filaments. Polymers, 14.10.3390/polym14204293 ↗
10. PEEK (Polyether-Ether-Ketone) and Its Composite Materials in Orthopedic Implantation10.1016/j.arabjc.2020.102977 ↗
11. Bioinspired Modifications of PEEK Implants for Bone Tissue Engineering10.3389/fbioe.2020.631616 ↗
12. Computer-Designed PEEK Implants: A Peek Into The Future of Cranioplasty?10.1097/SCS.0b013e3182a2f7b6 ↗
13. Polyetheretherketone (PEEK) for Medical Applications10.1007/s10856-016-5731-4 ↗
14. Zanjanijam, A.R., Major, I., Lyons, J.G., Lafont, U., and Devine, D.M. (2020). Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships. Polymers, 12.10.3390/polym12081665 ↗
15. Plasma-Sprayed Titanium Coating to Polyetheretherketone Improves the Bone-Implant Interface10.1016/j.spinee.2014.12.018 ↗
16. Effects of Porogen Morphology on the Architecture, Permeability, and Mechanical Properties of Hydroxyapatite Whisker Reinforced Polyetheretherketone Scaffolds10.1016/j.jmbbm.2020.103730 ↗
17. The Experimental Study of Tissue Integration into Porous Titanium Implants10.1177/1120700020943481 ↗
18. Porous PEEK Improves the Bone-Implant Interface Compared to Plasma-Sprayed Titanium Coating on PEEK10.1016/j.biomaterials.2018.09.009 ↗
19. Hong, J.-Y., Ko, S.-Y., Lee, W., Chang, Y.-Y., Kim, S.-H., and Yun, J.-H. (2020). Enhancement of Bone Ingrowth into a Porous Titanium Structure to Improve Osseointegration of Dental Implants: A Pilot Study in the Canine Model. Materials, 13.10.3390/ma13143061 ↗
20. Osseointegration of 3D Porous and Solid Ti–6Al–4V Implants —Narrow Gap Push-out Testing and Experimental Setup Considerations10.1016/j.jmbbm.2020.104282 ↗
21. Research Progress on the Design and Performance of Porous Titanium Alloy Bone Implants10.1016/j.jmrt.2023.01.155 ↗
22. Cytocompatibility, Osseointegration, and Bioactivity of Three-Dimensional Porous and Nanostructured Network on Polyetheretherketone10.1016/j.biomaterials.2013.08.071 ↗
23. In Vivo Bioactivity of Porous Polyetheretherketone with a Foamed Surface10.4012/dmj.2016-277 ↗
24. Extrusion-Based Additive Manufacturing of PEEK for Biomedical Applications10.1080/17452759.2015.1097053 ↗
25. Fabrication, Pore Structure and Compressive Behavior of Anisotropic Porous Titanium for Human Trabecular Bone Implant Applications10.1016/j.jmbbm.2015.02.023 ↗
26. Dua, R., Rashad, Z., Spears, J., Dunn, G., and Maxwell, M. (2021). Applications of 3D-Printed PEEK via Fused Filament Fabrication: A Systematic Review. Polymers, 13.10.3390/polym13224046 ↗
27. Nanostructural Interface and Strength of Polymer Composite Scaffolds Applied to Intervertebral Bone10.1016/j.colsurfa.2021.127190 ↗
28. Polymers for 3D Printing and Customized Additive Manufacturing10.1021/acs.chemrev.7b00074 ↗
29. Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis-Gerstorfer, J., Rupp, F., Thieringer, F.M., and Spintzyk, S. (2019). An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants. J. Clin. Med., 8.10.3390/jcm8060771 ↗
30. Recent Advances in Biopolymeric Composite Materials: Future Sustainability of Bone-Implant10.1016/j.rser.2021.111505 ↗
31. Fused Filament Fabrication-3D Printing of Poly-Ether-Ether-Ketone (PEEK) Spinal Fusion Cages10.1016/j.matlet.2022.133206 ↗
32. Mechanical Properties and Shape Memory Effect of 3D-Printed PLA-Based Porous Scaffolds10.1016/j.jmbbm.2015.11.036 ↗
33. Zhao, F., Li, D., and Jin, Z. (2018). Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications. Materials, 11.10.3390/ma11020288 ↗
34. Optimization of the Configuration of Porous Bone Scaffolds Made of Polyamide/Hydroxyapatite Composites Using Selective Laser Sintering for Tissue Engineering Applications
35. Osteogenesis of 3D Printed Porous Ti6Al4V Implants with Different Pore Sizes10.1016/j.jmbbm.2018.04.010 ↗
36. Ibrahim, H., Jahadakbar, A., Dehghan, A., Moghaddam, N.S., Amerinatanzi, A., and Elahinia, M. (2018). In Vitro Corrosion Assessment of Additively Manufactured Porous NiTi Structures for Bone Fixation Applications. Metals, 8.10.3390/met8030164 ↗
37. Application of TPMS Structure in Bone Regeneration
38. Effect of Pore Size on Bone Ingrowth into Porous Titanium Implants Fabricated by Additive Manufacturing: An in Vivo Experiment10.1016/j.msec.2015.10.069 ↗
39. Liu, F., Zhang, D., Zhang, P., Zhao, M., and Jafar, S. (2018). Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting. Materials, 11.10.3390/ma11030374 ↗
40. 3D Bio-Printing for Use as Bone Replacement Tissues: A Review of Biomedical Application10.1016/j.bea.2023.100075 ↗
41. Naghavi, S.A., Tamaddon, M., Marghoub, A., Wang, K., Babamiri, B.B., Hazeli, K., Xu, W., Lu, X., Sun, C., and Wang, L. (2022). Mechanical Characterisation and Numerical Modelling of TPMS-Based Gyroid and Diamond Ti6Al4V Scaffolds for Bone Implants: An Integrated Approach for Translational Consideration. Bioengineering, 9.10.3390/bioengineering9100504 ↗
42. Osteoconductivity of Bioactive Ti-6Al-4V Implants with Lattice-Shaped Interconnected Large Pores Fabricated by Electron Beam Melting10.1177/0885328220968218 ↗
43. High-Strength, Porous Additively Manufactured Implants with Optimized Mechanical Osseointegration10.1016/j.biomaterials.2021.121206 ↗
44. Topological Design and Additive Manufacturing of Porous Metals for Bone Scaffolds and Orthopaedic Implants: A Review10.1016/j.biomaterials.2016.01.012 ↗
45. Li, X., Feng, Y.-F., Wang, C.-T., Li, G.-C., Lei, W., Zhang, Z.-Y., and Wang, L. (2012). Evaluation of Biological Properties of Electron Beam Melted Ti6Al4V Implant with Biomimetic Coating In Vitro and In Vivo. PLoS ONE, 7.10.1371/journal.pone.0052049 ↗
46. Biomechanical Behavior of Diamond Lattice Scaffolds Obtained by Two Different Design Approaches with Similar Porosity; a Numerical Investigation with FEM and CFD Analysis10.1177/09544119221091346 ↗
47. Mechanical Properties and Fluid Permeability of Gyroid and Diamond Lattice Structures for Intervertebral Devices: Functional Requirements and Comparative Analysis10.1080/14686996.2021.1907222 ↗
48. Porous Polylactic Acid Scaffolds for Bone Regeneration: A Study of Additively Manufactured Triply Periodic Minimal Surfaces and Their Osteogenic Potential10.1177/2041731420956541 ↗
49. Cellular Ti–6Al–4V Structures with Interconnected Macro Porosity for Bone Implants Fabricated by Selective Electron Beam Melting10.1016/j.actbio.2008.03.013 ↗
50. Influence of Cell Shape on Mechanical Properties of Ti–6Al–4V Meshes Fabricated by Electron Beam Melting Method10.1016/j.actbio.2014.06.010 ↗
51. Controlled Elitist Multi-Objective Genetic Algorithm Joined with Neural Network to Study the Effects of Nano-Clay Percentage on Cell Size and Polymer Foams Density of PVC/Clay Nanocomposites10.1007/s10973-019-09059-x ↗
52. Alkentar, R., Kladovasilakis, N., Tzetzis, D., and Mankovits, T. (2023). Effects of Pore Size Parameters of Titanium Additively Manufactured Lattice Structures on the Osseointegration Process in Orthopedic Applications: A Comprehensive Review. Crystals, 13.10.3390/cryst13010113 ↗
53. Mechanical Characterization and Numerical Simulation of Polyether–Ether–Ketone (PEEK) Cranial Implants10.1016/j.jmbbm.2011.05.039 ↗
54. The Effects of Atomic Percentage and Size of Zinc Nanoparticles, and Atomic Porosity on Thermal and Mechanical Properties of Reinforced Calcium Phosphate Cement by Molecular Dynamics Simulation10.1016/j.jmbbm.2023.105785 ↗
55. Schoonjans, F. (2012). Digimizer Manual, MedCalc Software BVBA. [4th ed.].
56. Tensile Failure Study of 3D Printed PLA Using DIC Technique and FEM Analysis10.1016/j.mechmat.2022.104506 ↗
57. Biomechanical Simulation for 3 Layer Calvarial Prosthesis
58. On the Mechanical Behaviour of PEEK and HA Cranial Implants under Impact Loading10.1016/j.jmbbm.2017.01.012 ↗
59. (2022, January 13). High-Performance Materials. Available online: https://www.intamsys.com/high-performance-materials/.
60. A Comparative Study on the Customized Design of Mandibular Reconstruction Plates Using Finite Element Method
61. Surgical Planning and Finite Element Analysis for the Neurocraneal Protection in Cranioplasty with PMMA: A Case Study10.1016/j.heliyon.2022.e10706 ↗
62. Biomechanical Three-Dimensional Finite-Element Analysis of Maxillary Prostheses with Implants. Design of Number and Position of Implants for Maxillary Prostheses after Hemimaxillectomy10.1016/j.ijom.2010.06.011 ↗
63. Biomechanical Performance of Cranial Implants with Different Thicknesses and Material Properties: A Finite Element Study10.1016/j.compbiomed.2019.04.016 ↗
64. Ridwan-Pramana, A., Marcián, P., Borák, L., Narra, N., Forouzanfar, T., and Wolff, J. (2017). Finite Element Analysis of 6 Large PMMA Skull Reconstructions: A Multi-Criteria Evaluation Approach. PLoS ONE, 12.10.1371/journal.pone.0179325 ↗
65. (2022, April 03). Human Head. (20 July 2023). Available online: https://en.wikipedia.org/wiki/Human_head.
66. Hybrid Modeling Methods of Cranial Implants10.12913/22998624/99039 ↗
67. CAD-CAM vs Conventional Technique for Mandibular Reconstruction with Free Fibula Flap: A Comparison of Outcomes10.1016/j.suronc.2020.04.012 ↗
68. IX. On the Problem of the Most Efficient Tests of Statistical Hypotheses
69. Lo Giudice, A., Ronsivalle, V., Grippaudo, C., Lucchese, A., Muraglie, S., Lagravère, M.O., and Isola, G. (2020). One Step before 3D Printing—Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandible: A Comparative Study Using a Surface-to-Surface Matching Technique. Materials, 13.10.3390/ma13122798 ↗
70. Modelling and Evaluation of Meshed Implant for Cranial Reconstruction10.1007/s00170-021-08161-5 ↗
71. (2019, February 10). Geomagic Control X. Available online: https://www.software/geomagic-control-x.
72. The Influence of Surface Topology on the Quality of the Point Cloud Data Acquired with Laser Line Scanning Probe10.1108/SR-01-2013-611 ↗
73. Porous Polyethylene Implant for Cranioplasty and Skull Base Reconstruction
74. Integrated Porous Polyetheretherketone Implants for Treating Skull Defect10.1016/j.jmrt.2022.11.122 ↗
75. In Vitro and in Vivo Evaluations of Mechanical Properties, Biocompatibility and Osteogenic Ability of Sintered Porous Titanium Alloy Implant10.1039/C8RA07518B ↗
76. (2023, July 29). One-Sample t-Test. Available online: https://www.jmp.com/en_sg/statistics-knowledge-portal/t-test/one-sample-t-test.html.
77. Direct Fabrication through Electron Beam Melting Technology of Custom Cranial Implants Designed in a PHANToM-Based Haptic Environment10.1016/j.matdes.2008.11.013 ↗