journal article·2022-11-22Open access

Biodegradable Mg-Sc-Sr Alloy Improves Osteogenesis and Angiogenesis to Accelerate Bone Defect Restoration

Nadia Aboutalebianaraki, Craig J. Neal, Sudipta Seal, Mehdi Razavi

Abstract

Magnesium (Mg) and its alloys are considered to be biodegradable metallic biomaterials for potential orthopedic implants. While the osteogenic properties of Mg alloys have been widely studied, few reports focused on developing a bifunctional Mg implant with osteogenic and angiogenic properties. Herein, a Mg-Sc-Sr alloy was developed, and this alloy’s angiogenesis and osteogenesis effects were evaluated in vitro for the first time. X-ray Fluorescence (XRF), X-ray diffraction (XRD), and metallography images were used to evaluate the microstructure of the developed Mg-Sc-Sr alloy. Human umbilical vein/vascular endothelial cells (HUVECs) were used to evaluate the angiogenic character of the prepared Mg-Sc-Sr alloy. A mix of human bone-marrow-derived mesenchymal stromal cells (hBM-MSCs) and HUVEC cell cultures were used to assess the osteogenesis-stimulating effect of Mg-Sc-Sr alloy through alkaline phosphatase (ALP) and Von Kossa staining. Higher ALP activity and the number of calcified nodules (27% increase) were obtained for the Mg-Sc-Sr-treated groups compared to Mg-treated groups. In addition, higher VEGF expression (45.5% increase), tube length (80.8% increase), and number of meshes (37.9% increase) were observed. The Mg-Sc-Sr alloy showed significantly higher angiogenesis and osteogenic differentiation than pure Mg and the control group, suggesting such a composition as a promising candidate in bone implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biionix^{TM} (Bionic Materials, Implants & Interfaces) Cluster, Department of Medicine, University of Central Florida College of Medicine, Orlando, FL 32827, USA

Department of Materials Science and Engineering, University of Central Florida, Orlando, FL 32816, USA

Advanced Materials Processing and Analysis Center, Department of Materials Science and Engineering, University of Central Florida, Orlando, FL 32826, USA

Funding

UCF Start-Up Funding · UCF Seed Funding: ER2. Shared Research Facility Usage Award · National Science Foundation

References (74)

Show source-provided references
1. Design, Mg bone implant: Features, developments and perspectives10.1016/j.matdes.2019.108259 ↗
2. Mechanical, corrosion, and biocompatibility properties of Mg-Zr-Sr-Sc alloys for biodegradable implant applications10.1016/j.actbio.2019.12.001 ↗
3. Multi-functional cerium oxide nanoparticles regulate inflammation and enhance osteogenesis10.1016/j.msec.2021.112041 ↗
4. Kiernan, C., Knuth, C., and Farrell, E. (2018). Endochondral Ossification: Recapitulating Bone Development for Bone Defect Repair, Developmental Biology and Musculoskeletal Tissue Engineering, Elsevier.10.1016/B978-0-12-811467-4.00006-1 ↗
5. The effect of different coatings on bone response and degradation behavior of porous magnesium-strontium devices in segmental defect regeneration
6. Enhanced antibacterial properties, biocompatibility, and corrosion resistance of degradable Mg-Nd-Zn-Zr alloy10.1016/j.biomaterials.2015.02.096 ↗
7. Overview of advancement and development trend on magnesium alloy10.1016/j.jma.2019.08.001 ↗
8. Biomimicking bone–implant interface facilitates the bioadaption of a new degradable magnesium alloy to the bone tissue microenvironment10.1002/advs.202102035 ↗
9. Biofunctional magnesium coated Ti6Al4V scaffold enhances osteogenesis and angiogenesis in vitro and in vivo for orthopedic application
10. Controlling initial biodegradation of magnesium by a biocompatible strontium phosphate conversion coating10.1016/j.actbio.2013.11.016 ↗
11. Osteogenesis and angiogenesis of a bulk metallic glass for biomedical implants
12. Corrosion and biocompatibility improvement of magnesium-based alloys as bone implant materials: A review10.1093/rb/rbx004 ↗
13. Magnesium and human health: Perspectives and research directions
14. Development and evaluation of a magnesium–zinc–strontium alloy for biomedical applications—Alloy processing, microstructure, mechanical properties, and biodegradation10.1016/j.msec.2013.04.054 ↗
15. A surface-engineered multifunctional TiO2 based nano-layer simultaneously elevates the corrosion resistance, osteoconductivity and antimicrobial property of a magnesium alloy10.1016/j.actbio.2019.09.008 ↗
16. Zocchi, M., Locatelli, L., Zuccotti, G.V., Mazur, A., Béchet, D., Maier, J.A., and Castiglioni, S. (2022). Magnesium homeostasis in myogenic differentiation—A focus on the regulation of TRPM7, MagT1 and SLC41A1 transporters. Int. J. Mol. Sci., 23.10.3390/ijms23031658 ↗
17. Molecular regulation of angiogenesis and lymphangiogenesis10.1038/nrm2183 ↗
18. Magnesium promotes bone formation and angiogenesis by enhancing MC3T3-E1 secretion of PDGF-BB10.1016/j.bbrc.2020.05.113 ↗
19. Magnesium surface-activated 3D printed porous PEEK scaffolds for in vivo osseointegration by promoting angiogenesis and osteogenesis
20. High concentrations of magnesium modulate vascular endothelial cell behaviour in vitro10.1016/j.bbadis.2004.02.004 ↗
21. Biodegradable metal-derived magnesium and sodium enhances bone regeneration by angiogenesis aided osteogenesis and regulated biological apatite formation10.1016/j.cej.2020.127616 ↗
22. Antoniac, I., Miculescu, M., Mănescu, V., Stere, A., Quan, P.H., Păltânea, G., Robu, A., and Earar, K. (2022). Magnesium-based alloys used in orthopedic surgery. Materials, 15.10.3390/ma15031148 ↗
23. Surface modification of biodegradable magnesium and its alloys for biomedical applications10.1093/rb/rbu013 ↗
24. Mg–Zn–Mn alloy extract induces the angiogenesis of human umbilical vein endothelial cells via FGF/FGFR signaling pathway10.1016/j.bbrc.2019.04.198 ↗
25. The synergistic effects of Sr and Si bioactive ions on osteogenesis, osteoclastogenesis and angiogenesis for osteoporotic bone regeneration10.1016/j.actbio.2017.08.015 ↗
26. Microstructure and mechanical property of biodegradable Mg–1.5 Zn–0.6 Zr alloy with varying contents of scandium10.1016/j.matlet.2018.06.097 ↗
27. Improved osteointegration and angiogenesis of strontium-incorporated 3D-printed tantalum scaffold via bioinspired polydopamine coating10.1016/j.jmst.2020.08.017 ↗
28. Promoting in vivo early angiogenesis with sub-micrometer strontium-contained bioactive microspheres through modulating macrophage phenotypes10.1016/j.biomaterials.2018.06.004 ↗
29. The effects of a 3D-printed magnesium-/strontium-doped calcium silicate scaffold on regulation of bone regeneration via dual-stimulation of the AKT and WNT signaling pathways
30. Strontium-doped gelatin scaffolds promote M2 macrophage switch and angiogenesis through modulating the polarization of neutrophils10.1039/D0BM02126A ↗
31. Microstructures, mechanical properties, and degradation behaviors of heat-treated Mg-Sr alloys as potential biodegradable implant materials10.1016/j.jmbbm.2017.08.028 ↗
32. A functionalized TiO2/Mg2TiO4 nano-layer on biodegradable magnesium implant enables superior bone-implant integration and bacterial disinfection10.1016/j.biomaterials.2019.119372 ↗
33. A possible biodegradable magnesium implant material10.1002/adem.200600252 ↗
34. Borciani, G., Montalbano, G., Baldini, N., Vitale-Brovarone, C., and Ciapetti, G. (2022). Protocol of co-culture of human osteoblasts and osteoclasts to test biomaterials for bone tissue engineering. Methods Protoc., 5.10.3390/mps5010008 ↗
35. In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal10.1016/j.actbio.2012.02.018 ↗
36. Microstructure, mechanical properties and in vitro degradation behavior of a novel biodegradable Mg–1.5 Zn–0.6 Zr–0.2 Sc alloy10.1016/j.jmst.2015.02.001 ↗
37. The effect of grain refinement and precipitation strengthening induced by Sc or Er alloying on the mechanical properties of cast Al-Li-Cu-Mg alloys at elevated temperatures10.1016/j.msea.2021.141641 ↗
38. Effect of Scandium addition on evolution of microstructure, texture and mechanical properties of thermo-mechanically processed Al-Li alloy AA219510.1016/j.jallcom.2017.12.045 ↗
39. Effect of Sr on the microstructure and biodegradable behavior of Mg–Zn–Ca-Mn alloys for implant application10.1016/j.matdes.2018.04.062 ↗
40. Corrosion behaviour of AZ31 magnesium alloy containing various levels of strontium10.1016/j.corsci.2018.06.018 ↗
41. Effect of Sr addition on the grain refinement of AZ31 magnesium alloys10.1016/j.pnsc.2013.01.001 ↗
42. Grain refinement of magnesium alloys: A review of recent research, theoretical developments, and their application10.1007/s11661-012-1513-x ↗
43. In vitro and in vivo studies on pure Mg, Mg–1Ca and Mg–2Sr alloys processed by equal channel angular pressing10.1016/j.nanoms.2020.03.004 ↗
44. Fan, Y., Wu, G.H., and Zhai, C.Q. (2007). Effect of strontium on mechanical properties and corrosion resistance of AZ91D. Materials Science Forum, Trans Tech Publications Ltd.10.4028/0-87849-432-4.567 ↗
45. In vitro and in vivo studies of Mg-30Sc alloys with different phase structure for potential usage within bone10.1016/j.actbio.2019.03.009 ↗
46. Combined effect of grain refinement and surface modification of pure titanium on the attachment of mesenchymal stem cells and osteoblast-like SaOS-2 cells10.1016/j.msec.2016.10.035 ↗
47. Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings
48. The effect of MgO on the biodegradation, physical properties and biocompatibility of a Mg/HA/MgO nanocomposite manufactured by powder metallurgy method10.1016/j.jallcom.2015.09.107 ↗
49. Microstructure and corrosion properties of biodegradable Mg/MgO composite coating on Mg alloy prepared by high velocity suspension flame spraying10.1007/s11666-021-01214-x ↗
50. Enhanced corrosion protection of magnesium oxide coatings on magnesium deposited by ion beam-assisted evaporation10.1016/S0257-8972(98)00365-X ↗
51. Banerjee, P., Hasda, R., Murmu, M., and Hirani, H. (2022). MgO as corrosion inhibitor. Inorganic Anticorrosive Materials, Elsevier.10.1016/B978-0-323-90410-0.00011-8 ↗
52. Effects of MgO, ZnO, SrO, and SiO2 in tricalcium phosphate scaffolds on in vitro gene expression and in vivo osteogenesis10.1016/j.msec.2018.10.073 ↗
53. Magnesium enhances osteogenesis of BMSCs by tuning osteoimmunomodulation10.1155/2019/7908205 ↗
54. Effect of magnesium on the osteogenesis of normal human osteoblasts10.1684/mrh.2017.0422 ↗
55. In vitro and in vivo assessment of the effect of biodegradable magnesium alloys on osteogenesis10.1016/j.actbio.2021.12.032 ↗
56. The development of binary Mg–Ca alloys for use as biodegradable materials within bone10.1016/j.biomaterials.2007.12.021 ↗
57. Biodegradable Mg-Cu alloys with enhanced osteogenesis, angiogenesis, and long-lasting antibacterial effects10.1038/srep27374 ↗
58. Low-dose strontium stimulates osteogenesis but high-dose doses cause apoptosis in human adipose-derived stem cells via regulation of the ERK1/2 signaling pathway10.1186/s13287-017-0726-8 ↗
59. Positive modulation of osteogenesis-and osteoclastogenesis-related gene expression with strontium-containing microstructured Ti implants in rabbit cancellous bone10.1002/jbm.a.34433 ↗
60. Osteogenesis effects of strontium-substituted hydroxyapatite coatings on true bone ceramic surfaces in vitro and in vivo10.1088/1748-605X/aa89af ↗
61. A strontium-incorporated nanoporous titanium implant surface for rapid osseointegration10.1039/C5NR08580B ↗
62. Magnesium-based biomaterials as emerging agents for bone repair and regeneration: From mechanism to application10.1016/j.jma.2021.03.004 ↗
63. Unraveling the osteogenesis of magnesium by the activity of osteoblasts in vitro10.1039/C8TB01746H ↗
64. Evaluation of the osteo-inductive potential of hollow three-dimensional magnesium-strontium substitutes for the bone grafting application10.1016/j.msec.2016.12.028 ↗
65. Stimulatory effects of the degradation products from Mg-Ca-Sr alloy on the osteogenesis through regulating ERK signaling pathway10.1038/srep32323 ↗
66. Enhanced osteoblast functions of narrow interligand spaced Sr-HA nano-fibers/rods grown on microporous titania coatings10.1039/c3ra23425h ↗
67. Experimental and simulation studies of strontium/zinc-codoped hydroxyapatite porous scaffolds with excellent osteoinductivity and antibacterial activity10.1016/j.apsusc.2018.08.068 ↗
68. Competing roles of substrate composition, microstructure, and sustained strontium release in directing osteogenic differentiation of hMSCs10.1021/acsami.6b08694 ↗
69. Multifunctions of dual Zn/Mg ion co-implanted titanium on osteogenesis, angiogenesis and bacteria inhibition for dental implants10.1016/j.actbio.2016.11.067 ↗
70. Trace element-augmented titanium implant with targeted angiogenesis and enhanced osseointegration in osteoporotic rats10.3389/fchem.2022.839062 ↗
71. Endothelial Notch activity promotes angiogenesis and osteogenesis in bone10.1038/nature13146 ↗
72. Diomede, F., Marconi, G.D., Fonticoli, L., Pizzicanella, J., Merciaro, I., Bramanti, P., Mazzon, E., and Trubiani, O. (2020). Functional relationship between osteogenesis and angiogenesis in tissue regeneration. Int. J. Mol. Sci., 21.10.3390/ijms21093242 ↗
73. Coating the magnesium implants with reinforced nanocomposite nanoparticles for use in orthopedic applications10.1016/j.colsurfa.2021.126581 ↗
74. Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: Fabrication, characterization and simulation10.1016/j.jmbbm.2019.03.014 ↗