journal article·2023-05-25Open access

Effects of Polishing and Artificial Aging on Mechanical Properties of Dental LT Clear® Resin

Anna Paradowska-Stolarz, Joanna Wezgowiec, Andrzej Malysa, Mieszko Wieckiewicz

Abstract

Three-dimensional printing has become incorporated into various aspects of everyday life, including dentistry. Novel materials are being introduced rapidly. One such material is Dental LT Clear by Formlabs, a resin used for manufacturing occlusal splints, aligners, and orthodontic retainers. In this study, a total of 240 specimens, comprising two shapes (dumbbell and rectangular), were evaluated through compression and tensile tests. The compression tests revealed that the specimens were neither polished nor aged. However, after polishing, the compression modulus values decreased significantly. Specifically, the unpolished and nonaged specimens measured 0.87 ± 0.02, whereas the polished group measured 0.086 ± 0.03. The results were significantly affected by artificial aging. The polished group measured 0.73 ± 0.05, while the unpolished group measured 0.73 ± 0.03. In contrast, the tensile test proved that the specimens showed the highest resistance when the polishing was applied. The artificial aging influenced the tensile test and reduced the force needed to damage the specimens. The tensile modulus had the highest value when polishing was applied (3.00 ± 0.11). The conclusions drawn from these findings are as follows: 1. Polishing does not change the properties of the examined resin. 2. Artificial aging reduces resistance in both compression and tensile tests. 3. Polishing reduces the damage to the specimens in the aging process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Orthodontics and Dentofacial Orthopedics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Dentofacial Anomalies, Department of Maxillofacial Orthopedics and Orthodontics, Wroclaw Medical University, 50-425 Wroclaw, Poland

Department of Experimental Dentistry, Wroclaw Medical University, 50-425 Wroclaw, Poland

Funding

Wroclaw Medical University

References (34)

Show source-provided references
1. Bond strength of modern self-adhesive resin cements to human dentin and different CAD/CAM ceramics10.37190/ABB-01526-2019-02 ↗
2. Effect of staining and bleaching on the microhardness, surface roughness and color of different composite resins10.17219/dmp/131022 ↗
3. Goracci, C., Juloski, J., D’Amico, C., Balestra, D., Volpe, A., Juloski, J., and Vichi, A. (2023). Clinically Relevant Properties of 3D Printable Materials for Intraoral Use in Orthodontics: A Critical Review of the Literature. Materials, 16.10.3390/ma16062166 ↗
4. Mechanical behaviour of 3D printed vs thermoformed clear dental aligner materials under non-linear compressive loading using FEM10.1016/j.jmbbm.2020.104045 ↗
5. Skośkiewicz-Malinowska, K., Mysior, M., Rusak, A., Kuropka, P., Kozakiewicz, M., and Jurczyszyn, K. (2021). Application of Texture and Fractal Dimension Analysis to Evaluate Subgingival Cement Surfaces in Terms of Biocompatibility. Materials, 14.10.3390/ma14195857 ↗
6. Paradowska-Stolarz, A., Malysa, A., and Mikulewicz, M. (2022). Comparison of the Compression and Tensile Modulus of Two Chosen Resins Used in Dentistry for 3D Printing. Materials, 15.10.3390/ma15248956 ↗
7. Warnecki, M., Sarul, M., Kozakiewicz, M., Zięty, A., Babiarczuk, B., Kawala, B., and Jurczyszyn, K. (2022). Surface Evaluation of Aligners after Immersion in Coca-Cola and Orange Juice. Materials, 15.10.3390/ma15186341 ↗
8. Memè, L., Notarstefano, V., Sampalmieri, F., Orilisi, G., and Quinzi, V. (2021). ATR-FTIR Analysis of Orthodontic Invisalign® Aligners Subjected to Various In Vitro Aging Treatments. Materials, 14.10.3390/ma14040818 ↗
9. Evaluation of the color stability of temporary materials produced with CAD/CAM10.17219/dmp/126745 ↗
10. Paradowska-Stolarz, A., Wezgowiec, J., and Mikulewicz, M. (2023). Comparison of Two Chosen 3D Printing Resins Designed for Orthodontic Use: An In Vitro Study. Materials, 16.10.3390/ma16062237 ↗
11. Vichi, A., Balestra, D., Scotti, N., Louca, C., and Paolone, G. (2023). Translucency of CAD/CAM and 3D Printable Composite Materials for Permanent Dental Restorations. Polymers, 15.10.3390/polym15061443 ↗
12. Franchi, L., Vichi, A., Marti, P., Lampus, F., Guercio, S., Recupero, A., Giuntini, V., and Goracci, C. (2022). 3D Printed Customized Facemask for Maxillary Protraction in the Early Treatment of a Class III Malocclusion: Proof-of-Concept Clinical Case. Materials, 15.10.3390/ma15113747 ↗
13. Thurzo, A., Šufliarsky, B., Urbanová, W., Čverha, M., Strunga, M., and Varga, I. (2022). Pierre Robin Sequence and 3D Printed Personalized Composite Appliances in Interdisciplinary Approach. Polymers, 14.10.3390/polym14183858 ↗
14. Paradowska-Stolarz, A., Wieckiewicz, M., Kozakiewicz, M., and Jurczyszyn, K. (2023). Mechanical Properties, Fractal Dimension, and Texture Analysis of Selected 3D-Printed Resins Used in Dentistry That Underwent the Compression Test. Polymers, 15.10.3390/polym15071772 ↗
15. Effect of post-polymerization with autoclaving treatment on monomer elution and mechanical properties of 3D-printing acrylic resin for splint fabrication10.1016/j.jmbbm.2021.105015 ↗
16. (2003). Plastics—Determination of Compressive Properties. Standard No. ISO 604:2003.
17. (2019). Plastics—Determination of Tensile Properties—Part 1: General Principles. Standard No. ISO 527-1:2019.
18. In vitro aging of a heat/pressure-cured composite10.1016/0109-5641(93)90123-8 ↗
19. Malysa, A., Wezgowiec, J., Grzebieluch, W., Danel, D.P., and Wieckiewicz, M. (2022). Effect of Thermocycling on the Bond Strength of Self-Adhesive Resin Cements Used for Luting CAD/CAM Ceramics to Human Dentin. Int. J. Mol. Sci., 23.10.3390/ijms23020745 ↗
20. Oral splints for patients with temporomandibular disorders or bruxism: A systematic review and economic evaluation10.3310/hta24070 ↗
21. Comino-Garayoa, R., Peláez, J., Tobar, C., Rodríguez, V., and Suárez, M.J. (2021). Adhesion to Zirconia: A Systematic Review of Surface Pretreatments and Resin Cements. Materials, 14.10.3390/ma14112751 ↗
22. In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices10.1016/j.prosdent.2019.12.026 ↗
23. Effects of staining and artificial aging on optical properties of gingiva-colored resin-based restorative materials10.1007/s00784-022-04643-2 ↗
24. Color stability of self-adhering composite resins in different solutions10.17219/dmp/114099 ↗
25. El-Rashidy, A.A., Abdelraouf, R.M., and Habib, N.A. (2022). Effect of two artificial aging protocols on color and gloss of single-shade versus multi-shade resin composites. BMC Oral. Health, 22.10.1186/s12903-022-02351-7 ↗
26. Gómez-Polo, C., Martín Casado, A.M., Quispe, N., Gallardo, E.R., and Montero, J. (2023). Colour Changes of Acetal Resins (CAD-CAM) In Vivo. Appl. Sci., 13.10.3390/app13010181 ↗
27. Analysis of the thickness of 3-dimensional printed orthodontic aligners10.1016/j.ajodo.2020.07.029 ↗
28. Emam, M., Ghanem, L., and Abdel Sadek, H.M. (Dent. Med. Probl., 2023). Effect of different intraoral scanners and post-space depths on the trueness of digital impressions, Dent. Med. Probl., ahead of print.10.17219/dmp/162573 ↗
29. Wezgowiec, J., Paradowska-Stolarz, A., Malysa, A., Orzeszek, S., Seweryn, P., and Wieckiewicz, M. (2022). Effects of Various Disinfection Methods on the Material Properties of Silicone Dental Impressions of Different Types and Viscosities. Int. J. Mol. Sci., 23.10.3390/ijms231810859 ↗
30. Effects of immersion disinfection of agar-alginate combined impressions on the surface properties of stone casts10.4012/dmj.2015-163 ↗
31. Disinfection of dental impressions: Knowledge and practice among dental technicians10.2147/CCIDE.S205144 ↗
32. Comparison of hardness and polishability of various occlusal splint materials10.1016/j.jmbbm.2020.104270 ↗
33. Aretxabaleta, M., Xepapadeas, A.B., Poets, C.F., Koos, B., and Spintzyk, S. (2021). Fracture Load of an Orthodontic Appliance for Robin Sequence Treatment in a Digital Workflow. Materials, 14.10.3390/ma14020344 ↗
34. Islam, M.S., Nassar, M., Elsayed, M.A., Jameel, D.B., Ahmad, T.T., and Rahman, M.M. (2023). In Vitro Optical and Physical Stability of Resin Composite Materials with Different Filler Characteristics. Polymers, 15.10.3390/polym15092121 ↗