Synthesis and Characterization of Polymer-Based Coatings Modified with Bioactive Ceramic and Bovine Serum Albumin
Source abstract
Abstract
This study involves the synthesis of hydroxyapatite and describes the preparation and characterization of polymer coatings based on poly(ethylene glycol) diacrylate and poly(ethylene glycol) and modified with bovine serum albumin and hydroxyapatite. Hydroxyapatite was obtained by wet chemical synthesis and characterized by X-ray diffraction and FTIR spectroscopy, and its Ca/P molar ratio was determined (1.69 ± 0.08). The ceramic and bovine serum albumin were used in the preparation of composite materials with the polymeric matrix. The chemical composition of coatings was characterized with FTIR spectroscopy, and their morphology was recorded with SEM imaging. Moreover, the measurements of surface roughness parameters and stereometric research were performed. The prepared coatings were subjected to in vitro studies in simulated body fluid and artificial saliva. Changes in chemical composition and morphology after immersion were examined with FTIR spectroscopy and SEM imaging. Based on the conducted research, it can be stated that applied modifiers promote the biomineralization process. The roughness analysis confirmed prepared materials were characterized by the micrometer-scale topography. The materials morphology and roughness, and the morphology of the newly formed apatite deposit, were dependent on the type of the used modifier, and the artificial fluid used in in vitro studies.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials Science, Faculty of Materials Science and Physics, Cracow University of Technology, 37 Jana Pawła II Av., 31-864 Krakow, Poland
Institute of Inorganic Chemistry and Technology, Cracow University of Technology, 24 Warszawska St., 31-155 Krakow, Poland
Engineering Department, Lancaster University, Gillow Av., Lancaster LA1 4YW, UK
Materials Science Institute, Lancaster University, Gillow Av., Lancaster LA1 4YW, UK
Funding
Narodowe Centrum Nauki
References (43)
Show source-provided references
1. Romanos, G.E., Fischer, G.A., and Delgado-ruiz, R. (2021). Titanium wear of dental implants from placement, under loading and maintenance protocols. Int. J. Mol. Sci., 22.10.3390/ijms22031067 ↗
2. Mechanical Performance of Artificial Hip Stems Manufactured
3. Dong, H., Liu, H., Zhou, N., Li, Q., Yang, G., Chen, L., and Mou, Y. (2020). Surface modified techniques and emerging functional coating of dental implants. Coatings, 10.10.3390/coatings10111012 ↗
4. Beyond Risk: Bacterial Biofilms and Their Regulating Approaches10.3389/fmicb.2020.00928 ↗
5. Non-proteinaceous bacterial adhesins challenge the antifouling properties of polymer brush coatings10.1016/j.actbio.2015.05.037 ↗
6. Proteins, Platelets, and Blood Coagulation at Biomaterial Interfaces10.1016/j.colsurfb.2014.09.040 ↗
7. Chandra, P.K., Soker, S., and Atala, A. (2020). Tissue engineering: Current status and future perspectives. Principles of Tissue Engineering, Academic Press. [5th ed.].10.1016/B978-0-12-818422-6.00004-6 ↗
8. Properties of multifunctional composite materials based on nanomaterials: A review10.1039/C9RA10594H ↗
9. Senra, M.R., and Marques, M.D. (2020). Synthetic Polymeric Materials for Bone Replacement. J. Compos. Sci., 4.10.3390/jcs4040191 ↗
10. Zimina, A., Senatov, F., Choudhary, R., Kolesnikov, E., Anisimova, N., Kiselevskiy, M., Orlova, P., Strukova, N., Generalova, M., and Manskikh, V. (2020). Biocompatibility and physico-chemical properties of highly porous PLA/HA scaffolds for bone reconstruction. Polymers, 12.10.3390/polym12122938 ↗
11. Shi, H., Zhou, Z., Li, W., Fan, Y., Li, Z., and Wei, J. (2021). Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction. Crystals, 11.10.3390/cryst11020149 ↗
12. Nano-hydroxyapatite use in dentistry: A systematic review10.1080/03602532.2020.1758713 ↗
13. Bone regeneration with hydroxyapatite-based biomaterials10.1007/s42247-019-00063-3 ↗
14. Artificial enamel induced by phase transformation of amorphous nanoparticles10.1038/s41598-017-02949-w ↗
15. Bone Grafts in Jaw Cysts- Hydroxyapatite & Allogenic Bone—A Comparative Study10.3329/bsmmuj.v2i1.3707 ↗
16. Hydroxyapatite—Past, Present, and Future in Bone Regeneration
17. Yu, H.N., Hsu, H.C., Wu, S.C., Hsu, C.W., Hsu, S.K., and Ho, W.F. (2020). Characterization of nano-scale hydroxyapatite coating synthesized from eggshells through hydrothermal reaction on commercially pure titanium. Coatings, 10.10.3390/coatings10020112 ↗
18. Measurement methods for the mechanical testing and biocompatibility assessment of polymer-ceramic connective tissue replacements10.1016/j.measurement.2020.108733 ↗
19. Al-arjan, W.S., Umar, M., Khan, A., and Nazir, S. (2020). Pectin/Graphene Oxide/Nano-Hydroxyapatite Based Nanocomposite Scaffolds with Controlled Release of Drug for Bone Tissue Engineering: In-Vitro Evaluation of Biocompatibility and Cytotoxicity. Coatings, 10.10.3390/coatings10111120 ↗
20. On the use of superparamagnetic hydroxyapatite nanoparticles as an agent for magnetic and nuclear in vivo imaging10.1016/j.actbio.2018.04.040 ↗
21. Caballé-Serrano, J., Zhang, S., Sculean, A., Staehli, A., and Bosshardt, D.D. (2020). Tissue integration and degradation of a porous collagen-based scaffold used for soft tissue augmentation. Materials, 13.10.3390/ma13102420 ↗
22. Lee, S., Lee, D.S., Choi, I., Pham, L.B.H., and Jang, J.H. (2015). Design of an osteoinductive extracellular fibronectin matrix protein for bone tissue engineering. Int. J. Mol. Sci., 16.10.3390/ijms16047672 ↗
23. Albumin-based hydrogels for regenerative engineering and cell transplantation10.1002/bit.27167 ↗
24. Advances in gelatin-based hydrogels for wound management10.1039/D0TB02582H ↗
25. Production of amino acids from bovine serum albumin by continuous sub-critical water hydrolysis10.1016/j.supflu.2005.03.001 ↗
26. Hong, S., Choi, D.W., Kim, H.N., Park, C.G., Lee, W., and Park, H.H. (2020). Protein-based nanoparticles as drug delivery systems. Pharmaceutics, 12.10.3390/pharmaceutics12070604 ↗
27. Aramwit, P. (2016). Introduction to Biomaterials for Wound Healing, Woodhead Publishing.10.1016/B978-1-78242-456-7.00001-5 ↗
28. Lichtenberg, J.Y., Ling, Y., and Kim, S. (2019). Non-specific adsorption reduction methods in biosensing. Sensors, 19.10.3390/s19112488 ↗
29. Bacterial adherence to titanium surface coated with human serum albumin10.1097/01.mao.0000169767.85549.87 ↗
30. Comparison of bacterial adherence to polylactides, silicone, and titanium10.1080/00016480600987792 ↗
31. X-ray diffraction and infrared spectroscopy analyses on the crystallinity of engineered biological hydroxyapatite for medical application10.1088/1757-899X/79/1/012028 ↗
32. Precipitation of hydroxyapatite nanoparticles: Effects of precipitation method on electrophoretic deposition10.1007/s10856-005-0630-0 ↗
33. Development of a,b-plane-oriented hydroxyapatite ceramics as models for living bones and their cell adhesion behavior10.1016/j.actbio.2013.02.001 ↗
34. Carbonate substitution in the mineral component of bone: Discriminating the structural changes, simultaneously imposed by carbonate in A and B sites of apatite10.1016/j.jssc.2017.07.025 ↗
35. International Organization for Standardization (2008). Implants for Surgery—Hydroxyapatite—Part 1: Ceramic Hydroxyapatite, International Organization for Standardization. ISO 13779-1:2008.
36. Autonomous stepwise process for adsorption, reduction, and desorption of chromium ions by using Hydrogel beads having poly(ethylene glycol) chains10.1252/jcej.11we111 ↗
37. Biomineralization of hydroxyapatite on DNA molecules in SBF: Morphological features and computer simulation10.1021/la402589j ↗
38. Mineralisation of two phosphate ceramics in HBSS: Role of albumin10.1016/S0142-9612(02)00358-7 ↗
39. Crystallinity and solubility characteristics of hydroxyapatite adsorbed amino acid10.1016/S0142-9612(01)00358-1 ↗
40. Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation10.1016/j.actbio.2019.11.024 ↗
41. Osseointegration: Biological events in relation to characteristics of the implant surface
42. Advancing dental implant surface technology—From micron- to nanotopography10.1016/j.biomaterials.2008.05.012 ↗
43. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗