journal article·2025-01-16Open access

Three-Dimensional Printing/Bioprinting and Cellular Therapies for Regenerative Medicine: Current Advances

Ana Catarina Sousa, Rui Alvites, Bruna Lopes, Patrícia Sousa, Alícia Moreira, André Coelho, José Domingos Santos, Luís Atayde, Nuno Alves, Ana Colette Maurício

Abstract

The application of three-dimensional (3D) printing/bioprinting technologies and cell therapies has garnered significant attention due to their potential in the field of regenerative medicine. This paper aims to provide a comprehensive overview of 3D printing/bioprinting technology and cell therapies, highlighting their results in diverse medical applications, while also discussing the capabilities and limitations of their combined use. The synergistic combination of 3D printing and cellular therapies has been recognised as a promising and innovative approach, and it is expected that these technologies will progressively assume a crucial role in the treatment of various diseases and conditions in the foreseeable future. This review concludes with a forward-looking perspective on the future impact of these technologies, highlighting their potential to revolutionize regenerative medicine through enhanced tissue repair and organ replacement strategies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Pluripotent Stem Cells Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departamento de Clínicas Veterinárias, Instituto de Ciências Biomédicas de Abel Salazar (ICBAS), Universidade do Porto (UP), Rua de Jorge Viterbo Ferreira, nº 228, 4050-313 Porto, Portugal

Centro de Estudos de Ciência Animal (CECA), Instituto de Ciências, Tecnologias e Agroambiente da Universidade do Porto (ICETA), Rua D. Manuel II, Apartado 55142, 4051-401 Porto, Portugal

Associate Laboratory for Animal and Veterinary Science (AL4AnimalS), Av. Universidade Técnica, 1300-477 Lisboa, Portugal

Instituto Universitário de Ciências da Saúde (CESPU), Instituto Universitário de Ciências da Saúde (IUCS), Avenida Central de Gandra 1317, Gandra, 4585-116 Paredes, Portugal

REQUIMTE-LAQV, Departamento de Engenharia Metalúrgica e Materiais, Faculdade de Engenharia, UP, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal

Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, Rua de Portugal—Zona Industrial, 2430-028 Marinha Grande, Portugal

Funding

Fundaςão para a Ciência e Tecnologia (FCT) · CECA · UP · FCT/MCTES national funds · ANI–Projetos ID&T Empresas em Copromoςão · PTDC

References (100+)

Show source-provided references
1. Jessop, Z.M., Al-Sabah, A., Francis, W.R., and Whitaker, I.S. (2016). Transforming healthcare through regenerative medicine. BMC Med., 14.10.1186/s12916-016-0669-4 ↗
2. Tissue engineering and regenerative medicine: Bench to bedside in urology. Preface10.1016/j.addr.2015.01.006 ↗
3. The Progression of Regenerative Medicine and its Impact on Therapy Translation10.1111/cts.12736 ↗
4. Regenerative medicine: From the laboratory looking out10.1057/s41599-017-0036-x ↗
5. 3D printing in biomedicine: Advancing personalized care through additive manufacturing10.37349/emed.2023.00200 ↗
6. Applications, advancements, and challenges of 3D bioprinting in organ transplantation10.1039/D3BM01934A ↗
7. Barh, D., and Azevedo, V. (2018). Chapter 10—3D Printing Technologies and Their Applications in Biomedical Science. Omics Technologies and Bio-Engineering, Academic Press.
8. 3D Printing and Nanotechnology: A Multiscale Alliance in Personalized Medicine10.1002/adfm.202009691 ↗
9. 3D printing for regenerative medicine: From bench to bedside10.1557/mrs.2015.5 ↗
10. Amoyav, B., Goldstein, Y., Steinberg, E., and Benny, O. (2021). 3D Printed Microfluidic Devices for Drug Release Assays. Pharmaceutics, 13.10.3390/pharmaceutics13010013 ↗
11. 3D bioprinting using stem cells10.1038/pr.2017.252 ↗
12. Liu, K., Hu, N., Yu, Z., Zhang, X., Ma, H., Qu, H., and Ruan, C. (2023). 3D printing and bioprinting in urology. Int. J. Bioprint., 9.10.36922/ijb.0969 ↗
13. Jain, P., Kathuria, H., and Dubey, N. (2022). Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models. Biomaterials, 287.10.1016/j.biomaterials.2022.121639 ↗
14. Administration, U.S.F.D. (2024, July 23). Medical Applications of 3D Printing, Available online: https://www.fda.gov/medical-devices/3d-printing-medical-devices/medical-applications-3d-printing.
15. Uskoković, V., and Uskoković, D.P. (2018). Chapter 4—3D printing: Prospects and challenges. Nanotechnologies in Preventive and Regenerative Medicine, Elsevier.10.1016/B978-0-323-48063-5.00011-3 ↗
16. Chung, J.J., Im, H., Kim, S.H., Park, J.W., and Jung, Y. (2020). Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.586406 ↗
17. ASTM (2009). ASTM International Committee F42 on Additive Manufacturing Technologies ASTM F2792–10. Standard Terminology for Additive Manufacturing Technologies, ASTM.
18. Ng, W.L., Lee, J.M., Zhou, M., Chen, Y.W., Lee, K.A., Yeong, W.Y., and Shen, Y.F. (2020). Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges. Biofabrication, 12.10.1088/1758-5090/ab6034 ↗
19. Basit, A.W., and Gaisford, S. (2018). The History, Developments and Opportunities of Stereolithography. 3D Printing of Pharmaceuticals, Springer International Publishing.10.1007/978-3-319-90755-0 ↗
20. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications10.1016/j.jconrel.2020.10.008 ↗
21. Vat photopolymerization of polymers and polymer composites: Processes and applications
22. Fused deposition modeling: Process, materials, parameters, properties, and applications10.1007/s00170-022-08860-7 ↗
23. Direct Investment Casting For Pattern Developed By Desktop 3D Printer10.1051/matecconf/201713500036 ↗
24. Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption—A review
25. Chartrain, N.A., Gilchrist, K.H., Ho, V.B., and Klarmann, G.J. (2022). 3D bioprinting for the repair of articular cartilage and osteochondral tissue. Bioprinting, 28.10.1016/j.bprint.2022.e00239 ↗
26. Gibson, I., Rosen, D.W., Stucker, B., Khorasani, M., Rosen, D., Stucker, B., and Khorasani, M. (2021). Additive Manufacturing Technologies, Springer.10.1007/978-3-030-56127-7 ↗
27. Polymers for 3D Printing and Customized Additive Manufacturing10.1021/acs.chemrev.7b00074 ↗
28. Additive manufacturing in the aerospace and automotive industries: Recent trends and role in achieving sustainable development goals10.1016/j.asej.2023.102516 ↗
29. Pou, J., Riveiro, A., and Davim, J.P. (2021). Chapter 1—Introduction to additive manufacturing. Additive Manufacturing, Elsevier.10.1002/9781119750529.ch1 ↗
30. 3D printed optics and photonics: Processes, materials and applications10.1016/j.mattod.2023.06.019 ↗
31. University, L. (2024, July 20). About Additive Manufacturing: Powder Bed Fusion. Available online: https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/powderbedfusion/.
32. Powder bed fusion process in additive manufacturing: An overview10.1016/j.matpr.2020.02.635 ↗
33. Sandhu, K., Singh, S., Prakash, C., Subburaj, K., and Ramakrishna, S. (2023). Chapter Two—Materials for additive manufacturing in clinical podiatry. 3D Printing in Podiatric Medicine, Academic Press.
34. Materials for additive manufacturing10.1016/j.cirp.2017.05.009 ↗
35. University, L. (2024, July 20). About Additive Manufacturing: Material Jetting. Available online: https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/materialjetting/.
36. Perspectives on Additive Manufacturing10.1146/annurev-matsci-070115-031606 ↗
37. Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges10.1016/j.pmatsci.2020.100707 ↗
38. Printability–A key issue in extrusion-based bioprinting10.1016/j.jpha.2021.02.001 ↗
39. Tuominen, J. (2017). Directed energy deposition–Review of materials, properties and applications. 3D Boosti ja Invest, Tampere University of Technology.
40. University, L. (2024, July 10). About Additive Manufacturing: Directed Energy Deposition. Available online: https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/directedenergydeposition/.
41. Gibson, I., Rosen, D., Stucker, B., Khorasani, M., Gibson, I., Rosen, D., Stucker, B., and Khorasani, M. (2021). Sheet lamination. Additive Manufacturing Technologies, Springer.10.1007/978-3-030-56127-7 ↗
42. University, L. (2024, July 25). About Additive Manufacturing: Sheet Lamination. Available online: https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/sheetlamination/.
43. Gail Kim, R., Abisado, M., Villaverde, J., and Sampedro, G. (2023). A Survey of Image-Based Fault Monitoring in Additive Manufacturing: Recent Developments and Future Directions. Sensors, 23.10.3390/s23156821 ↗
44. Fatigue behaviour analysis of AISI 316-L parts obtained by machining process and additive manufacturing10.1088/1757-899X/1193/1/012101 ↗
45. Biofabrication: A Guide to Technology and Terminology10.1016/j.tibtech.2017.10.015 ↗
46. Pantermehl, S., Emmert, S., Foth, A., Grabow, N., Alkildani, S., Bader, R., Barbeck, M., and Jung, O. (2021). 3D Printing for Soft Tissue Regeneration and Applications in Medicine. Biomedicines, 9.10.3390/biomedicines9040336 ↗
47. Recent advances in biofabrication strategies based on bioprinting for vascularized tissue repair and regeneration10.1016/j.matdes.2023.111885 ↗
48. Development of 3D bioprinting: From printing methods to biomedical applications10.1016/j.ajps.2019.11.003 ↗
49. Sufaru, I.-G., Macovei, G., Stoleriu, S., Martu, M.-A., Luchian, I., Kappenberg-Nitescu, D.-C., and Solomon, S.M. (2022). 3D Printed and Bioprinted Membranes and Scaffolds for the Periodontal Tissue Regeneration: A Narrative Review. Membranes, 12.10.3390/membranes12090902 ↗
50. Gunduz, O., Egles, C., Pérez, R.A., Ficai, D., and Ustundag, C.B. (2023). Bioprinting. Biomaterials and Tissue Engineering, Springer International Publishing.10.1007/978-3-031-35832-6 ↗
51. Organ printing: Computer-aided jet-based 3D tissue engineering10.1016/S0167-7799(03)00033-7 ↗
52. Inkjet printing for high-throughput cell patterning10.1016/j.biomaterials.2003.10.052 ↗
53. Scaffold-free vascular tissue engineering using bioprinting10.1016/j.biomaterials.2009.06.034 ↗
54. Design and 3D bioprinting of interconnected porous scaffolds for bone regeneration. An additive manufacturing approach10.1016/j.jmapro.2021.01.057 ↗
55. Bioprinting technology: A current state-of-the-art review10.1115/1.4028512 ↗
56. Rider, P., Kačarević, Ž.P., Alkildani, S., Retnasingh, S., Schnettler, R., and Barbeck, M. (2018). Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation. Int. J. Mol. Sci., 19.10.3390/ijms19113308 ↗
57. Biomedical production of implants by additive electro-chemical and physical processes10.1016/j.cirp.2012.05.005 ↗
58. Application of 3D bioprinting in the prevention and the therapy for human diseases10.1038/s41392-021-00566-8 ↗
59. Bártolo, P.J. (2011). Photonic and Biomedical Applications of the Two-Photon Polymerization Technique. Stereolithography: Materials, Processes and Applications, Springer US.
60. Gu, B.K., Choi, D.J., Park, S.J., Kim, M.S., Kang, C.M., and Kim, C.H. (2016). 3-dimensional bioprinting for tissue engineering applications. Biomater. Res., 20.10.1186/s40824-016-0058-2 ↗
61. An overview of selective laser sintering 3D printing technology for biomedical and sports device applications: Processes, materials, and applications10.1016/j.optlastec.2023.110459 ↗
62. Xie, Z., Gao, M., Lobo, A.O., and Webster, T.J. (2020). 3D Bioprinting in Tissue Engineering for Medical Applications: The Classic and the Hybrid. Polymers, 12.10.3390/polym12081717 ↗
63. Ramesh, S., Harrysson, O.L.A., Rao, P.K., Tamayol, A., Cormier, D.R., Zhang, Y., and Rivero, I.V. (2021). Extrusion bioprinting: Recent progress, challenges, and future opportunities. Bioprinting, 21.10.1016/j.bprint.2020.e00116 ↗
64. Arefin, A.M.E., Khatri, N.R., Kulkarni, N., and Egan, P.F. (2021). Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications. Polymers, 13.10.3390/polym13091499 ↗
65. Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures
66. Fused deposition modeling with polypropylene10.1016/j.matdes.2015.06.053 ↗
67. Applications of 3D printing in medicine: A review10.1016/j.stlm.2024.100149 ↗
68. Barbeck, M., Jung, O., Smeets, R., and Koržinskas, T. (2019). Biomaterial-Supported Tissue Reconstruction or Regeneration, BoD—Books on Demand.10.5772/intechopen.77756 ↗
69. Rossi, A., Pescara, T., Gambelli, A.M., Gaggia, F., Asthana, A., Perrier, Q., Basta, G., Moretti, M., Senin, N., and Rossi, F. (2024). Biomaterials for extrusion-based bioprinting and biomedical applications. Front. Bioeng. Biotechnol., 12.10.3389/fbioe.2024.1393641 ↗
70. Inkjet printing biomaterials for tissue engineering: Bioprinting10.1179/1743280414Y.0000000040 ↗
71. 3D inkjet printing of biomaterials: Principles and applications10.1002/mds3.10143 ↗
72. Saygili, E., Dogan-Gurbuz, A.A., Yesil-Celiktas, O., and Draz, M.S. (2020). 3D bioprinting: A powerful tool to leverage tissue engineering and microbial systems. Bioprinting, 18.10.1016/j.bprint.2019.e00071 ↗
73. 3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
74. Recent advances in bioprinting techniques: Approaches, applications and future prospects10.1186/s12967-016-1028-0 ↗
75. Microvalve-based bioprinting—Process, bio-inks and applications10.1039/C6BM00861E ↗
76. An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
77. Ouyang, L., Yao, R., Zhao, Y., and Sun, W. (2016). Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells. Biofabrication, 8.10.1088/1758-5090/8/3/035020 ↗
78. 3D printing of layered brain-like structures using peptide modified gellan gum substrates10.1016/j.biomaterials.2015.07.022 ↗
79. Su, C., Chen, Y., Tian, S., Lu, C., and Lv, Q. (2022). Natural Materials for 3D Printing and Their Applications. Gels, 8.10.3390/gels8110748 ↗
80. Collagen-based bioinks for hard tissue engineering applications: A comprehensive review10.1007/s10856-019-6234-x ↗
81. Suo, H., Zhang, J., Xu, M., and Wang, L. (2021). Low-temperature 3D printing of collagen and chitosan composite for tissue engineering. Mater. Sci. Eng. C Mater. Biol. Appl., 123.10.1016/j.msec.2021.111963 ↗
82. Elastin-like Polypeptide-Based Bioink: A Promising Alternative for 3D Bioprinting10.1021/acs.biomac.1c00861 ↗
83. Albumin-based biomaterial for lung tissue engineering applications10.1080/00914037.2016.1180610 ↗
84. Development and Characterization of a 3D Printed, Keratin-Based Hydrogel10.1007/s10439-016-1621-7 ↗
85. Porous keratin scaffold-promising biomaterial for tissue engineering and drug delivery10.1002/jbm.b.31483 ↗
86. A functional agarose-hydroxyapatite scaffold for osteochondral interface regeneration10.1016/j.biomaterials.2012.03.076 ↗
87. Axpe, E., and Oyen, M.L. (2016). Applications of Alginate-Based Bioinks in 3D Bioprinting. Int. J. Mol. Sci., 17.10.3390/ijms17121976 ↗
88. Petta, D., D’Amora, U., Ambrosio, L., Grijpma, D.W., Eglin, D., and D’Este, M. (2020). Hyaluronic acid as a bioink for extrusion-based 3D printing. Biofabrication, 12.10.1088/1758-5090/ab8752 ↗
89. Dutta, P., Rinki, K., and Dutta, J. (2011). Chitosan: A promising biomaterial for tissue engineering scaffolds. Chitosan for Biomaterials II, Springer.10.1007/12_2011_112 ↗
90. Application of xanthan gum as polysaccharide in tissue engineering: A review10.1016/j.carbpol.2017.10.009 ↗
91. Harnessing the potential of dialdehyde alginate-xanthan gum hydrogels as niche bioscaffolds for tissue engineering10.1016/j.ijbiomac.2022.03.024 ↗
92. Drug delivery and tissue engineering applications of biocompatible pectin-chitin/nano CaCO3 composite scaffolds10.1016/j.colsurfb.2013.01.048 ↗
93. Akkineni, A.R., Elci, B.S., Lode, A., and Gelinsky, M. (2022). Addition of High Acyl Gellan Gum to Low Acyl Gellan Gum Enables the Blends 3D Bioprintable. Gels, 8.10.3390/gels8040199 ↗
94. Li, S., Tian, X., Fan, J., Tong, H., Ao, Q., and Wang, X. (2019). Chitosans for tissue repair and organ three-dimensional (3D) bioprinting. Micromachines, 10.10.3390/mi10110765 ↗
95. Processing and properties of chitosan inks for 3D printing of hydrogel microstructures10.1021/acsbiomaterials.8b00415 ↗
96. Rastogi, P., and Kandasubramanian, B. (2019). Review of alginate-based hydrogel bioprinting for application in tissue engineering. Biofabrication, 11.10.1088/1758-5090/ab331e ↗
97. Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction10.1016/j.biomaterials.2015.05.005 ↗
98. Negrini, N.C., Celikkin, N., Tarsini, P., Farè, S., and Święszkowski, W. (2020). Three-dimensional printing of chemically crosslinked gelatin hydrogels for adipose tissue engineering. Biofabrication, 12.10.1088/1758-5090/ab56f9 ↗
99. 3D printing of neural tissues derived from human induced pluripotent stem cells using a fibrin-based bioink10.1021/acsbiomaterials.8b01235 ↗
100. Khoeini, R., Nosrati, H., Akbarzadeh, A., Eftekhari, A., Kavetskyy, T., Khalilov, R., Ahmadian, E., Nasibova, A., Datta, P., and Roshangar, L. (2021). Natural and Synthetic Bioinks for 3D Bioprinting. Adv. NanoBiomed Res., 1.10.1002/anbr.202000097 ↗