Current Trend and New Opportunities for Multifunctional Bio-Scaffold Fabrication via High-Pressure Foaming
Source abstract
Abstract
Biocompatible and biodegradable foams prepared using the high-pressure foaming technique have been widely investigated in recent decades as porous scaffolds for in vitro and in vivo tissue growth. In fact, the foaming process can operate at low temperatures to load bioactive molecules and cells within the pores of the scaffold, while the density and pore architecture, and, hence, properties of the scaffold, can be finely modulated by the proper selection of materials and processing conditions. Most importantly, the high-pressure foaming of polymers is an ideal choice to limit and/or avoid the use of cytotoxic and tissue-toxic compounds during scaffold preparation. The aim of this review is to provide the reader with the state of the art and current trend in the high-pressure foaming of biomedical polymers and composites towards the design and fabrication of multifunctional scaffolds for tissue engineering. This manuscript describes the application of the gas foaming process for bio-scaffold design and fabrication and highlights some of the most interesting results on: (1) the engineering of porous scaffolds featuring biomimetic porosity to guide cell behavior and to mimic the hierarchical architecture of complex tissues, such as bone; (2) the bioactivation of the scaffolds through the incorporation of inorganic fillers and drugs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · biodegradable polymer synthesis and properties · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials Science and Technology (INTEMA), National University of Mar del Plata, National Research Council (CONICET), Mar del Plata 7600, Argentina
Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, 80125 Naples, Italy
References (100+)
Show source-provided references
1. Lee, S.T., and Ramesh, N.S. (2004). Polymeric Foams: Mechanisms, CRC Press.10.1201/9780203506141 ↗
2. Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges10.1016/j.supflu.2017.11.013 ↗
3. Open-Pore Biodegradable Foams Prepared via Gas Foaming and Microparticulate Templating10.1002/mabi.200700278 ↗
4. Facile preparation of open-cellular porous poly (l-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications10.1016/j.cej.2016.09.023 ↗
5. Processing/structure/property relationship of multi-scaled PCL and PCL–HA composite scaffolds prepared via gas foaming and NaCl reverse templating10.1002/bit.23018 ↗
6. Sustainable polymer foaming using high pressure carbon dioxide: A review on fundamentals, processes and applications10.1039/b801895b ↗
7. Control of pore size and structure of tissue engineering scaffolds produced by supercritical fluid processing10.22203/eCM.v014a07 ↗
8. Fabrication of highly interconnected porous poly(ɛ-caprolactone) scaffolds with supercritical CO2 foaming and polymer leaching10.1007/s10853-018-3166-7 ↗
9. Tailoring the pore structure of PCL scaffolds for tissue engineering prepared via gas foaming of multi-phase blends10.1007/s10934-011-9458-9 ↗
10. Solid-state supercritical CO2 foaming of PCL and PCL-HA nano-composite: Effect of composition, thermal history and foaming process on foam pore structure10.1016/j.supflu.2011.05.009 ↗
11. Generation of Microcellular Polymeric Foams Using Supercritical Carbon Dioxide. I: Effect of Pressure and Temperature on nucleation10.1002/pen.760341407 ↗
12. Density, interfacial tension, and viscosity of polyethylene glycol 6000 and supercritical CO210.1016/j.supflu.2018.05.012 ↗
13. Foaming of poly(lactic acid) with supercritical CO2: The combined effect of crystallinity and crystalline morphology on cellular structure10.1016/j.supflu.2018.12.006 ↗
14. The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering10.1016/j.actbio.2011.07.032 ↗
15. Polystyrene foaming at high pressure drop rates10.1021/acs.iecr.5b04911 ↗
16. Solid-state foaming of biodegradable polyesters by means of supercritical CO2/ethyl lactate mixtures: Towards designing advanced materials by means of sustainable processes10.1016/j.eurpolymj.2013.11.015 ↗
17. Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers10.1002/pen.760350509 ↗
18. Experimental and numerical studies on the effects of pressure release rate on number density of bubbles and bubble growth in a polymeric foaming process10.1016/j.ces.2008.04.037 ↗
19. Salerno, A., Diéguez, S., Diaz-Gomez, L., Gómez-Amoza, J.L., Magariños, B., Concheiro, A., Domingo, C., Alvarez-Lorenzo, C., and García-González, C.A. (2017). Synthetic scaffolds with full pore interconnectivity for bone regeneration prepared by supercritical foaming using advanced biofunctional plasticizers. Biofabrication, 9.10.1088/1758-5090/aa78c5 ↗
20. A clean and sustainable route towards the design and fabrication of biodegradable foams by means of supercritical CO2/ethyl lactate solid-state foaming10.1039/c3ra42345j ↗
21. De Ponti, R., Lardini, E., Martini, A., and Torricelli, C. (1991). Use of Supercritical Fluids to Obtain Porous Sponges of Biodegradable. (No WO1991009079 A1), Polymers. Patent.
22. Novel approach to fabricate porous sponges of poly(d,l-lactic-co-glycolic acid) without the use of organic solvents10.1016/0142-9612(96)87284-X ↗
23. Open pore biodegradable matrices formed with gas foaming10.1002/(SICI)1097-4636(19981205)42:3<396::AID-JBM7>3.0.CO;2-E ↗
24. Role of poly(lactide-co-glycolide) particle size on gas-foamed scaffolds10.1163/1568562042459742 ↗
25. Shea, L.D., Smiley, E., Bonadio, J., and Mooney, D.J. (1999). DNA delivery from polymer matrices for tissue engineering. Nat. Biotechnol., 17.10.1038/9853 ↗
26. Bioabsorbable polymer scaffolds for tissue engineering capable of sustained growth factor delivery10.1016/S0168-3659(99)00138-8 ↗
27. Fabrication and in vitro testing of polymeric delivery system for condensed DNA10.1002/jbm.a.20036 ↗
28. Long-Term In Vivo Gene Expression via Delivery of PEI–DNA Condensates from Porous Polymer Scaffolds10.1089/hum.2005.16.609 ↗
29. Generation of porous microcellular 85/15 poly (dl-lactide-co-glycolide) foams for biomedical applications10.1016/j.biomaterials.2003.09.040 ↗
30. Active growth factor delivery from poly(D,L-lactide-co-glycolide) foams prepared in supercritical CO210.1016/S0168-3659(99)00268-0 ↗
31. Bioresorbable composites prepared by supercritical fluid foaming10.1002/jbm.a.30385 ↗
32. Biocompatibility of Bioresorbable Poly(L-lactic acid) Composite Scaffolds Obtained by Supercritical Gas Foaming with Human Fetal Bone Cells10.1089/ten.2005.11.1640 ↗
33. Time-lapsed imaging for in-process evaluation of supercritical fluid processing of tissue engineering scaffolds10.1002/btpr.191 ↗
34. Interconnectivity analysis of supercritical CO2-foamed scaffolds10.1016/j.cmpb.2010.08.010 ↗
35. Ultrasonic monitoring of foamed polymeric tissue scaffold fabrication10.1007/s10856-008-3445-y ↗
36. Mammalian cell survival and processing in supercritical CO210.1073/pnas.0508895103 ↗
37. Sorption and diffusion of compressed carbon dioxide in polycaprolactone for the development of porous scaffolds10.1016/j.msec.2012.02.021 ↗
38. Investigation of the Interaction of CO2 with Poly(L-lactide), Poly(DL-lactide) and Poly(e-caprolactone) using FTIR Spectroscopy10.1002/app.28443 ↗
39. Characterization of the porous structure of biodegradable scaffolds obtained with supercritical CO2 as foaming agent10.1007/s10934-006-9094-y ↗
40. Development of polycaprolactone scaffold with antibacterial activity by an integrated supercritical extraction and impregnation process10.1016/j.supflu.2013.03.017 ↗
41. Carbon dioxide-induced melting point depression of biodegradable semicrystalline polymers10.1016/j.supflu.2006.02.001 ↗
42. Detection of melting point depression and crystallization of polycaprolactone (PCL) in scCO2 by infrared spectroscopy10.1038/pj.2012.113 ↗
43. Effect of Temperature and Pressure on the Behavior of Poly(ε-caprolactone) in the Presence of Supercritical Carbon Dioxide10.1021/ie402256a ↗
44. High-pressure rheological analysis of CO2-induced melting point depression and viscosity reduction of poly(ε-caprolactone)10.1016/j.polymer.2015.05.026 ↗
45. Scaffold for tissue engineering fabricated by non-isothermal supercritical carbon dioxide foaming of a highly crystalline polyester10.1016/j.actbio.2009.07.020 ↗
46. Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.07.015 ↗
47. The influence of silica on pore diameter and distribution in PLA scaffolds produced using supercritical CO210.1007/s10856-008-3380-y ↗
48. Particle seeding enhances interconnectivity in polymeric scaffolds foamed using supercritical CO210.1016/j.actbio.2009.08.013 ↗
49. A method for solvent-free fabrication of porous polymer using solid-state foaming and ultrasound for tissue engineering applications10.1016/j.biomaterials.2005.09.029 ↗
50. Post-processing of polymer foam tissue scaffolds with high power ultrasound: A route to increased pore interconnectivity, pore size and fluid transport10.1016/j.msec.2013.07.046 ↗
51. The effect of anisotropic architecture on cell and tissue infiltration into tissue engineering scaffolds10.1016/j.biomaterials.2006.08.010 ↗
52. Design and Preparation of m-Bimodal Porous Scaffold for Tissue Engineering10.1002/app.26881 ↗
53. Engineered l-bimodal poly(e-caprolactone) porous scaffold for enhanced hMSC colonization and proliferation10.1016/j.actbio.2008.10.012 ↗
54. Effect of Micro- and Macroporosity of Bone Tissue Three-Dimensional-Poly(e-Caprolactone) Scaffold on Human Mesenchymal Stem Cells Invasion, Proliferation, and Differentiation In Vitro10.1089/ten.tea.2009.0494 ↗
55. Foaming strategies for bioabsorbable polymers in supercritical fluid mixtures. Part I. Miscibility and foaming of poly(l-lactic acid) in carbon dioxide + acetone binary fluid mixtures10.1016/j.supflu.2010.05.005 ↗
56. Foaming strategies for bioabsorbable polymers in supercritical fluid mixtures. Part II. Foaming of poly(ε-caprolactone-co-lactide) in carbon dioxide and carbon dioxide + acetone fluid mixtures and formation of tubular foams via solution extrusion10.1016/j.supflu.2010.05.004 ↗
57. The effect of ethyl-lactate and ethyl-acetate plasticizers on PCL and PCL–HA composites foamed with supercritical CO210.1016/j.supflu.2014.10.007 ↗
58. Low-temperature clean preparationof poly(lactic acid) foams by combining ethyllactate and supercritical CO2: Correlationbetween processing and foam pore structure10.1002/pi.4677 ↗
59. TGF-β3 encapsulated PLCL scaffold by a supercritical CO2–HFIP co-solvent system for cartilage tissue engineering10.1016/j.jconrel.2015.03.026 ↗
60. Supercritical CO2 foamed polycaprolactone scaffolds for controlled delivery of 5-fluorouracil, nicotinamide and triflusal10.1016/j.ijpharm.2015.11.012 ↗
61. Leung, L., Chan, C., Baek, S., and Naguib, H. (2008). Comparison of morphology and mechanical properties of PLGA bioscaffolds. Biomed. Mater., 3.10.1088/1748-6041/3/2/025006 ↗
62. A Study on the Effect of Degradation Media on the Physical and Mechanical Properties of Porous PLGA 85/15 Scaffolds10.1002/jbm.b.31470 ↗
63. Preparation of polymer foams with a gradient of cell size: Further exploring the nucleation effect of porous inorganic materials in polymer foaming10.1016/j.mtcomm.2016.08.006 ↗
64. Nanoporous PMMA foams with templated pore size obtained by localized in situ synthesis of nanoparticles and CO2 foaming10.1016/j.polymer.2017.07.067 ↗
65. Bioinspired large-scale aligned porous materials assembled with dual temperature gradients10.1126/sciadv.1500849 ↗
66. A new experimental system for combinatorial exploration of foaming of polymers in carbon dioxide: The gradient foaming of PMMA10.1016/j.supflu.2015.09.030 ↗
67. Rostami-Tapeh-Esmaeil, E., Shojaei, S., and Rodrigue, D. (2022). Mechanical and Thermal Properties of Functionally Graded Polyolefin Elastomer Foams. Polymers, 14.10.3390/polym14194124 ↗
68. Di Maio, E., Iannace, S., and Mensitieri, G. (2021). Foaming with Supercritical Fluids, Elsevier.10.1016/B978-0-444-63724-6.00004-4 ↗
69. Multi-graded foams upon time-dependent exposition to blowing agent10.1016/j.cej.2019.01.077 ↗
70. Structure-gradient thermoplastic polyurethane foams with enhanced resilience derived by microcellular foaming10.1016/j.supflu.2022.105667 ↗
71. Sánchez-Calderón, I., Bernardo, V., Santiago-Calvo, M., Naji, H., Saiani, A., and Rodríguez-Pérez, M.Á. (2021). Effect of the Molecular Structure of TPU on the Cellular Structure of Nanocellular Polymers Based on PMMA/TPU Blends. Polymers, 13.10.3390/polym13183055 ↗
72. Nanocellular Polymers with a Gradient Cellular Structure Based on Poly(methyl methacrylate)/Thermoplastic Polyurethane Blends Produced by Gas Dissolution Foaming10.1002/mame.201900428 ↗
73. Sintering graded foamed beads: Compressive properties10.1002/app.52052 ↗
74. Recent progress in processing functionally graded polymer foams10.3390/ma13184060 ↗
75. TPU-based porous heterostructures by combined techniques10.1515/ipp-2022-0026 ↗
76. Drobny, J.G. (2014). Handbook of Thermoplastic Elastomers, Elsevier.10.1016/B978-0-323-22136-8.00013-2 ↗
77. Making sense of 3-D printing: Creating a map of additive manufacturing products and services
78. Additive manufacturing at Industry 4.0: A review
79. Influence of FDM process parameters on the mechanical properties of polymer specimens: A review10.1016/j.polymertesting.2018.05.020 ↗
80. The manufacture of 3D printing of medical grade TPU10.1007/s40964-017-0023-1 ↗
81. Haryńska, A., Gubanska, I., Kucinska-Lipka, J., and Janik, H. (2018). Fabrication and characterization of flexible medical-grade TPU filament for fused deposition modeling 3DP technology. Polymers, 10.10.20944/preprints201810.0552.v1 ↗
82. Mechanically robust, ultraelastic hierarchical foam with tunable properties via 3D printing10.1002/adfm.201800631 ↗
83. Foam 3D printing of thermoplastics: A symbiosis of additive manufacturing and foaming technology10.1002/advs.202105701 ↗
84. Park, B.K., Hwang, D.J., Kwon, D.E., Yoon, T.J., and Lee, Y.-W. (2018). Fabrication and characterization of multiscale PLA structures using integrated rapid prototyping and gas foaming technologies. Nanomaterials, 8.10.3390/nano8080575 ↗
85. Development of microcellular thermoplastic polyurethane honeycombs with tailored elasticity and energy absorption via CO2 foaming10.1016/j.ijmecsci.2021.106324 ↗
86. Growth in early life predicts bone strength in late adulthood10.1016/j.bone.2007.05.007 ↗
87. Biodegradable PCL/fibroin/hydroxyapatite porous scaffolds prepared by supercritical foaming for bone regeneration10.1016/j.ijpharm.2017.05.038 ↗
88. Formation of porous HPCL/LPCL/HA scaffolds with supercritical CO2 gas foaming method10.1016/j.jmbbm.2016.12.014 ↗
89. Comparison between PCL/hydroxyapatite (HA) and PCL/halloysite nanotube (HNT) composite scaffolds prepared by co-extrusion and gas foaming10.1016/j.msec.2016.11.049 ↗
90. Highly interconnected macroporous MBG/PLGA scaffolds with enhanced mechanical and biological properties via green foaming strategy10.1016/j.cjche.2020.07.063 ↗
91. Supercritical CO2 foamed composite scaffolds incorporating bioactive lipids promote vascularized bone regeneration via Hif-1α upregulation and enhanced type H vessel formation10.1016/j.actbio.2019.05.066 ↗
92. Formation of porous biodegradable scaffolds based on poly(propylene carbonate) using gas foaming technology10.1016/j.msec.2018.11.088 ↗
93. Efficient strategies to produce Graphene and functionalized graphene materials: A review10.1016/j.apsadv.2023.100386 ↗
94. Preparation of graphene by supercritical CO2 circulating exfoliation with a jet cavitation10.1016/j.supflu.2022.105605 ↗
95. Exfoliation and distribution behavior of graphene nanoplatelets in polystyrene-based foams fabricated by supercritical CO2 assisted microcellular foaming10.1016/j.ces.2021.117331 ↗
96. Evlashin, S., Dyakonov, P., Tarkhov, M., Dagesyan, S., Rodionov, S., Shpichka, A., Kostenko, M., Konev, S., Sergeichev, I., and Timashev, P. (2019). Flexible Polycaprolactone and Polycaprolactone/Graphene Scaffolds for Tissue Engineering. Materials, 12.10.3390/ma12182991 ↗
97. Ambient Condition Production of High Quality Reduced Graphene Oxide10.1002/admi.201800737 ↗
98. Fabrication of bimodal open-porous poly (butylene succinate)/cellulose nanocrystals composite scaffolds for tissue engineering application10.1016/j.ijbiomac.2019.10.085 ↗
99. Drug loading of polymer implants by supercritical CO2 assisted impregnation: A review10.1016/j.jconrel.2015.05.002 ↗
100. Supercritical CO2-assisted impregnation/deposition of polymeric materials with pharmaceutical, nutraceutical, and biomedical applications: A review (2015–2021)10.1016/j.supflu.2022.105763 ↗