journal article·2023-08-09Open access

Liver dECM–Gelatin Composite Bioink for Precise 3D Printing of Highly Functional Liver Tissues

Min Kyeong Kim, Wonwoo Jeong, Hyun-Wook Kang

Abstract

In recent studies, liver decellularized extracellular matrix (dECM)-based bioinks have gained significant attention for their excellent compatibility with hepatocytes. However, their low printability limits the fabrication of highly functional liver tissue. In this study, a new liver dECM–gelatin composite bioink (dECM gBioink) was developed to overcome this limitation. The dECM gBioink was prepared by incorporating a viscous gelatin mixture into the liver dECM material. The novel dECM gBioink showed 2.44 and 10.71 times higher bioprinting resolution and compressive modulus, respectively, than a traditional dECM bioink. In addition, the new bioink enabled stable stacking with 20 or more layers, whereas a structure printed with the traditional dECM bioink collapsed. Moreover, the proposed dECM gBioink exhibited excellent hepatocyte and endothelial cell compatibility. At last, the liver lobule mimetic structure was successfully fabricated with a precisely patterned endothelial cell cord-like pattern and primary hepatocytes using the dECM gBioink. The fabricated lobule structure exhibited excellent hepatic functionalities and dose-dependent responses to hepatotoxic drugs. These results demonstrated that the gelatin mixture can significantly improve the printability and mechanical properties of the liver dECM materials while maintaining good cytocompatibility. This novel liver dECM gBioink with enhanced 3D printability and resolution can be used as an advanced tool for engineering highly functional liver tissues.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Tissue Engineering and Regenerative Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical Engineering, Ulsan National Institute of Science and Technology (UNIST), UNIST 50, UNIST-gil, Ulsan 44919, Republic of Korea

Funding

Institute of Civil Military Technology Cooperation · Ministry of Trade, Industry & Energy (MOTIE, Republic of Korea)

References (50)

Show source-provided references
1. Liver tissue engineering: From implantable tissue to whole organ engineering10.1002/hep4.1136 ↗
2. Stem cell therapy and tissue engineering strategies using cell aggregates and decellularized scaffolds for the rescue of liver failure10.1177/2041731420986711 ↗
3. Hydrogel-Based Platforms for the Regeneration of Osteochondral Tissue and Intervertebral Disc10.3390/polym4031590 ↗
4. Collagen density gradient on three-dimensional printed poly(ε-caprolactone) scaffolds for interface tissue engineering10.1002/term.2457 ↗
5. Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments10.1088/1758-5090/aae543 ↗
6. Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting10.1073/pnas.1524510113 ↗
7. Bioprinting of multiscaled hepatic lobules within a highly vascularized construct10.1002/smll.201905505 ↗
8. 3D bioprinting of bicellular liver lobule-mimetic structures via microextrusion of cellulose nanocrystal-incorporated shear-thinning bioink10.1038/s41598-020-77146-3 ↗
9. An overview of tissue and whole organ decellularization processes10.1016/j.biomaterials.2011.01.057 ↗
10. Development of liver decellularized extracellular matrix bioink for three-dimensional cell printing-based liver tissue engineering10.1021/acs.biomac.6b01908 ↗
11. Development of GelMA/PCL and dECM/PCL resins for 3D printing of acellular in vitro tissue scaffolds by stereolithography10.1016/j.msec.2020.110958 ↗
12. Fabrication of liver microtissue with liver decellularized extracellular matrix (dECM) bioink by digital light processing (DLP) bioprinting10.1016/j.msec.2020.110625 ↗
13. Facile Bioprinting Process for Fabricating Size-Controllable Functional Microtissues Using Light-Activated Decellularized Extracellular Matrix-Based Bioinks10.1002/admt.202100947 ↗
14. Decellularized extracellular matrix bioinks and the external stimuli to enhance cardiac tissue development in vitro10.1016/j.actbio.2019.04.026 ↗
15. A novel decellularized skeletal muscle-derived ECM scaffolding system for in situ muscle regeneration10.1016/j.ymeth.2019.06.027 ↗
16. Production and evaluation of decellularized extracellular matrix hydrogel for cartilage regeneration derived from knee cartilage10.1002/jbm.a.36871 ↗
17. Cell-printed 3D liver-on-a-chip possessing a liver microenvironment and biliary system10.1088/1758-5090/aaf9fa ↗
18. Directing the growth and alignment of biliary epithelium within extracellular matrix hydrogels10.1016/j.actbio.2018.12.039 ↗
19. Extracellular matrix scaffold and hydrogel derived from decellularized and delipidized human pancreas10.1038/s41598-018-28857-1 ↗
20. Application of gelatin bioinks and cell-printing technology to enhance cell delivery capability for 3D liver fibrosis-on-a-chip development10.1021/acsbiomaterials.9b01735 ↗
21. Development and characterization of a naturally derived lung extracellular matrix hydrogel10.1002/jbm.a.35726 ↗
22. Decellularized extracellular matrix-based bio-ink with enhanced 3D printability and mechanical properties10.1088/1758-5090/ab5d80 ↗
23. Porcine lung-derived extracellular matrix hydrogel properties are dependent on pepsin digestion time10.1089/ten.tec.2020.0042 ↗
24. Recent advances in 2D and 3D in vitro systems using primary hepatocytes, alternative hepatocyte sources and non-parenchymal liver cells and their use in investigating mechanisms of hepatotoxicity, cell signaling and ADME10.1007/s00204-013-1078-5 ↗
25. 3D bioprinting of mechanically tuned bioinks derived from cardiac decellularized extracellular matrix10.1016/j.actbio.2020.11.006 ↗
26. InVERT molding for scalable control of tissue microarchitecture10.1038/ncomms2853 ↗
27. Isolation and co-culture of rat parenchymal and non-parenchymal liver cells to evaluate cellular interactions and response10.1038/srep25329 ↗
28. High-Precision 3D bio-dot printing to improve paracrine interaction between multiple types of cell spheroids10.1002/adfm.202005324 ↗
29. Preparation of isolated rat liver cells10.1016/S0091-679X(08)61797-5 ↗
30. 3D cell-printing of tendon-bone interface using tissue-derived extracellular matrix bioinks for chronic rotator cuff repair10.1088/1758-5090/abd159 ↗
31. A 3D cell printed muscle construct with tissue-derived bioink for the treatment of volumetric muscle loss10.1016/j.biomaterials.2019.03.036 ↗
32. Therapeutic effect of decellularized extracellular matrix-based hydrogel for radiation esophagitis by 3D printed esophageal stent10.1016/j.biomaterials.2020.120477 ↗
33. Three-dimensional bioprinting of a full-thickness functional skin model using acellular dermal matrix and gelatin methacrylamide bioink10.1016/j.actbio.2021.07.012 ↗
34. Decellularized extracellular matrix: A step towards the next generation source for bioink manufacturing10.1088/1758-5090/aa7e98 ↗
35. Interpenetrating collagen-fibrin composite matrices with varying protein contents and ratios10.1021/bm0602233 ↗
36. Compression-induced structural and mechanical changes of fibrin-collagen composites10.1016/j.matbio.2016.10.007 ↗
37. Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells10.1088/1758-5090/8/3/035020 ↗
38. Assessment of hepatocellular function within PEG hydrogels10.1016/j.biomaterials.2006.08.043 ↗
39. Effect of detergent type on the performance of liver decellularized extracellular matrix-based bio-inks10.1177/2041731421997091 ↗
40. Liver extracellular matrix providing dual functions of two-dimensional substrate coating and three-dimensional injectable hydrogel platform for liver tissue engineering10.1021/bm4015039 ↗
41. Assessing porcine liver-derived biomatrix for hepatic tissue engineering10.1089/ten.2004.10.1046 ↗
42. A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs10.1016/j.actbio.2015.07.030 ↗
43. In vitro models of angiogenesis and vasculogenesis in fibrin gel10.1016/j.yexcr.2013.06.006 ↗
44. Functionalized Vascular Structure in Bioengineered Liver Identified with Proteomics10.1021/acsbiomaterials.0c01353 ↗
45. A vascularized model of the human liver mimics regenerative responses10.1073/pnas.2115867119 ↗
46. Engineering tissue-specific, multiscale microvasculature with a capillary network for prevascularized tissue10.1002/smtd.202100632 ↗
47. Hybrid sponge comprised of galactosylated chitosan and hyaluronic acid mediates the co-culture of hepatocytes and endothelial cells10.1016/j.jbiosc.2013.06.015 ↗
48. A Cytochrome P450–Independent Mechanism of Acetaminophen-Induced Injury in Cultured Mouse Hepatocytes10.1124/jpet.115.223537 ↗
49. Bioprinted 3D vascularized tissue model for drug toxicity analysis10.1063/1.4994708 ↗
50. Acetaminophen cytotoxicity is ameliorated in a human liver organotypic co-culture model10.1038/srep17455 ↗