journal article·2022-07-27Open access

Geometry-Based Computational Fluid Dynamic Model for Predicting the Biological Behavior of Bone Tissue Engineering Scaffolds

Abdalla M. Omar, Mohamed H. Hassan, Evangelos Daskalakis, Gokhan Ates, Charlie J. Bright, Zhanyan Xu, Emily J. Powell, Wajira Mirihanage, Paulo J. D. S. Bartolo

Abstract

The use of biocompatible and biodegradable porous scaffolds produced via additive manufacturing is one of the most common approaches in tissue engineering. The geometric design of tissue engineering scaffolds (e.g., pore size, pore shape, and pore distribution) has a significant impact on their biological behavior. Fluid flow dynamics are important for understanding blood flow through a porous structure, as they determine the transport of nutrients and oxygen to cells and the flushing of toxic waste. The aim of this study is to investigate the impact of the scaffold architecture, pore size and distribution on its biological performance using Computational Fluid Dynamics (CFD). Different blood flow velocities (BFV) induce wall shear stresses (WSS) on cells. WSS values above 30 mPa are detrimental to their growth. In this study, two scaffold designs were considered: rectangular scaffolds with uniform square pores (300, 350, and 450 µm), and anatomically designed circular scaffolds with a bone-like structure and pore size gradient (476–979 µm). The anatomically designed scaffolds provided the best fluid flow conditions, suggesting a 24.21% improvement in the biological performance compared to the rectangular scaffolds. The numerical observations are aligned with those of previously reported biological studies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Cellular and Composite Structures · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester M13 9PL, UK

Department of Materials, The University of Manchester, Manchester M13 9PL, UK

Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore 639798, Singapore

Funding

University of Manchester and the Engineering and Physical Sciences Research Council (EPSRC) of the UK · Global Challenges Research Fund (CRF)

References (52)

Show source-provided references
1. Blood rheology: Key parameters, impact on blood flow, role in sickle cell disease and effects of exercise10.3389/fphys.2019.01329 ↗
2. Daskalakis, E., Liu, F., Cooper, G., Weightman, A., Koç, B., Blunn, G., and Bártolo, P.J. (2021). Bioglasses for Bone Tissue Engineering. Bio-Materials and Prototyping Applications in Medicine, Springer.10.1007/978-3-030-35876-1_9 ↗
3. Polymer fiber scaffolds for bone and cartilage tissue engineering10.1002/adfm.201903279 ↗
4. Biomaterials & scaffolds for tissue engineering10.1016/S1369-7021(11)70058-X ↗
5. Scaffolds for bone tissue engineering: State of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
6. Polymeric scaffolds for bone tissue engineering10.1023/B:ABME.0000017544.36001.8e ↗
7. Porous scaffold design for tissue engineering10.1038/nmat1421 ↗
8. Polymeric Scaffolds in Tissue Engineering Application: A Review10.1155/2011/290602 ↗
9. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
10. 3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing10.1007/s10853-018-1992-2 ↗
11. Current Concepts in Scaffolding for Bone Tissue Engineering
12. A review: Bio-fiber’s as reinforcement in composites of polylactic acid (PLA)10.1016/j.matpr.2020.02.457 ↗
13. Poly (lactic acid)(PLA) nanofibers for bone tissue engineering
14. Bio-Based Polymers for 3D Printing of Bioscaffolds10.1080/15583724.2018.1484761 ↗
15. Advances in cell scaffolds for tissue engineering: The value of liquid crystalline elastomers10.1002/chem.201800477 ↗
16. Controlling Topography and Crystallinity of Melt Electrowritten Poly(ɛ-Caprolactone) Fibers10.1089/3dp.2020.0290 ↗
17. Biomanufacturing of customized modular scaffolds for critical bone defects10.1016/j.cirp.2019.04.106 ↗
18. Review of additive manufactured tissue engineering scaffolds: Relationship between geometry and performance10.1186/s41038-018-0121-4 ↗
19. Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects10.18063/ijb.v7i2.268 ↗
20. The use of finite element analyses to design and fabricate three-dimensional scaffolds for skeletal tissue engineering10.3389/fbioe.2017.00030 ↗
21. The stem cell niche: Interactions between stem cells and their environment10.1155/2018/4879379 ↗
22. Bone vasculature and bone marrow vascular niches in health and disease10.1002/jbmr.4171 ↗
23. Egan, P.F., Gonella, V.C., Engensperger, M., Ferguson, S.J., and Shea, K. (2017, January 6–9). Design and fabrication of 3D printed tissue scaffolds informed by mechanics and fluids simulations. Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Cleveland, OH, USA.10.1115/DETC2017-67602 ↗
24. Fluid permeability of graded porosity scaffolds architectured with minimal surfaces10.1021/acsbiomaterials.8b01400 ↗
25. Integrating finite element modelling and 3D printing to engineer biomimetic polymeric scaffolds for tissue engineering10.1080/03008207.2019.1656720 ↗
26. Design and simulation of flow field for bone tissue engineering scaffold based on triply periodic minimal surface10.1186/s10033-019-0329-7 ↗
27. Localisation of mineralised tissue in a complex spinner flask environment correlates with predicted wall shear stress level localisation10.22203/eCM.v036a05 ↗
28. Histological method to study the effect of shear stress on cell proliferation and tissue morphology in a bioreactor10.1007/s13770-019-00181-3 ↗
29. Flow rates in perfusion bioreactors to maximise mineralisation in bone tissue engineering in vitro10.1016/j.jbiomech.2018.08.004 ↗
30. Shear stress induced by fluid flow produces improvements in tissue-engineered cartilage10.1088/1758-5090/aba412 ↗
31. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
32. Inlet flow rate of perfusion bioreactors affects fluid flow dynamics, but not oxygen concentration in 3D-printed scaffolds for bone tissue engineering: Computational analysis and experimental validation10.1016/j.compbiomed.2020.103826 ↗
33. Finite element study of stem cells under fluid flow for mechanoregulation toward osteochondral cells10.1007/s10856-021-06545-3 ↗
34. Finite element analysis of mechanical behavior, permeability of irregular porous scaffolds and lattice-based porous scaffolds10.1088/2053-1591/ab3ac1 ↗
35. A multiscale computational fluid dynamics approach to simulate the micro-fluidic environment within a tissue engineering scaffold with highly irregular pore geometry10.1007/s10237-019-01188-4 ↗
36. Changes in scaffold porosity during bone tissue engineering in perfusion bioreactors considerably affect cellular mechanical stimulation for mineralization10.1016/j.bonr.2020.100265 ↗
37. New formulations for space provision and bone regeneration
38. Evaluation of an anorganic bovine-derived mineral with P-15 hydrogel bone graft: Preliminary study in a rabbit cranial bone model10.1111/j.1600-0501.2011.02179.x ↗
39. Falacho, R.I., Palma, P.J., Marques, J.A., Figueiredo, M.H., Caramelo, F., Dias, I., Viegas, C., and Guerra, F. (2021). Collagenated Porcine Heterologous Bone Grafts: Histomorphometric Evaluation of Bone Formation Using Different Physical Forms in a Rabbit Cancellous Bone Model. Molecules, 26.10.3390/molecules26051339 ↗
40. Comparison of Newtonian and Non-newtonian Fluid Models in Blood Flow Simulation in Patients with Intracranial Arterial Stenosis10.3389/fphys.2021.718540 ↗
41. Permeability and fluid flow-induced wall shear stress of bone tissue scaffolds: Computational fluid dynamic analysis using Newtonian and non-Newtonian blood flow models10.1016/j.compbiomed.2018.06.017 ↗
42. Computational Fluid Dynamics Study of the Effects of Surface Roughness on Permeability and Fluid Flow-Induced Wall Shear Stress in Scaffolds10.1007/s10439-018-2101-z ↗
43. Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds10.1021/acsomega.1c05437 ↗
44. Hassan, M.H., Omar, A.M., Daskalakis, E., Hou, Y., Huang, B., Strashnov, I., Grieve, B.D., and Bártolo, P. (2020). The Potential of Polyethylene Terephthalate Glycol as Biomaterial for Bone Tissue Engineering. Polymers, 12.10.3390/polym12123045 ↗
45. Darcian permeability constant as indicator for shear stresses in regular scaffold systems for tissue engineering10.1007/s10237-009-0153-6 ↗
46. McKibbin, R. (1998). Mathematical models for heat and mass transport in geothermal systems. Transport Phenomena in Porous Media, Elsevier.10.1016/B978-008042843-7/50006-4 ↗
47. Effect of scaffold architecture on cell seeding efficiency: A discrete phase model CFD analysis10.1016/j.compbiomed.2019.04.025 ↗
48. The select of internal architecture for porous Ti alloy scaffold: A compromise between mechanical properties and permeability10.1016/j.matdes.2020.108754 ↗
49. Modulation of human mesenchymal and pluripotent stem cell behavior using biophysical and biochemical cues: A review10.1002/bit.26075 ↗
50. Egger, D., Fischer, M., Clementi, A., Ribitsch, V., Hansmann, J., and Kasper, C. (2017). Development and characterization of a parallelizable perfusion bioreactor for 3D cell culture. Bioengineering, 4.10.3390/bioengineering4020051 ↗
51. Physiologic blood flow is turbulent10.1038/s41598-020-72309-8 ↗
52. Revealing intraosseous blood flow in the human tibia with ultrasound10.1002/jbm4.10543 ↗