journal article·2023-02-07Open access

The Effect of Surface Treatments on Zirconia Bond Strength and Durability

Dongni Shen, Huihua Wang, Ying Shi, Zhiwei Su, Matthias Hannig, Baiping Fu

Abstract

To evaluate the effects of airborne particle abrasion (APA) combined with MDP-containing resin cement, a glass-ceramic spray deposition (GCSD) method on the shear bond strengths (SBSs) and durability of 3 mol% yttrium oxide-stabilized zirconia ceramic (3Y-TZP) compared with lithium disilicate glass ceramics (LDGC). 3Y-TZP disks were randomly treated as follows: for Group APA+MDP, 3Y-TZP was abrased using 50 μm Al2O3 particles under 0.1 Mpa and bonded with MDP-containing resin cement; for Group GCSD, 3Y-TZP was treated with the GCSD method, etched by 5% HF for 90 s, silanized and bonded with resin cement without MDP. Group LDGC was bonded as the Group GCSD. X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy dispersive X-ray detector (EDX) were used to analyze the surface chemical and micro-morphological changes of the ceramics before bonding. The bonded ceramic specimens were randomly divided into subgroups, and the SBSs were determined before and after 10,000 thermocycling. The SBSs were analyzed with a one-way ANOVA analysis. Failure modes were determined with optical microscopy and SEM. The XRD, ATR-FTIR and XPS results identified the formation of lithium disilicate and zirconium silicate on 3Y-TZP after GCSD. The SEM micrographs revealed that 3Y-TZP surfaces were roughened by APA, while 3Y-TZP with GCSD and LDGC surfaces could be etched by HF to be porous. The APA treatment combined with MDP-containing resin cement produced the high immediate zirconia shear bond strengths (SBSs: 37.41 ± 13.51 Mpa) that was similar to the SBSs of the LDGC (34.87 ± 11.02 Mpa, p > 0.05), but, after thermocycling, the former dramatically decreased (24.00 ± 6.86 Mpa, maximum reduction by 35.85%) and the latter exhibited the highest SBSs (30.72 ± 7.97 Mpa, minimum reduction by 11.9%). The 3Y-TZP with GCSD treatment displayed the lower zirconia SBSs before thermocycling (27.03 ± 9.76 Mpa, p < 0.05), but it was similar to the 3Y-TZP treated with APA and MDP containing resin cement after thermocycling (21.84 ± 7.03 vs. 24.00 ± 6.86 Mpa, p > 0.05). The APA combined with MDP-containing resin cement could achieve the high immediate zirconia SBSs of those of the LDGC, but it decreased significantly after thermocycling. The GCSD technique could yield the immediate zirconia SBSs similar to those of LDGC before thermocycling, and long-term zirconia SBSs were similar to those of 3Y-TZP treated with APA followed by MDP-containing resin cement after thermocycling. Hence, the GCSD technique could enrich zirconia surface treatments and is an alternative to zirconia surface pretreatment for 3Y-TZP bond durability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Provincial Engineering Research Center for Oral Biomaterials and Devices, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, Hangzhou 310000, China

Department of Stomatology, Second Affiliated Hospital, Zhejiang University School of Medicine, Hangzhou 310009, China

Clinic of Operative Dentistry, Periodontology and Preventive Dentistry, Saarland University, D-66421 Homburg, Germany

Funding

National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities · Key Research and Development Plan Projects of Zhejiang Province

References (60)

Show source-provided references
1. Influence of surface treatments and cyclic fatigue on subsurface defects and mechanical properties of zirconia frameworks10.1016/j.dental.2021.02.020 ↗
2. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations10.1016/j.actbio.2019.04.043 ↗
3. A novel porous silica-zirconia coating for improving bond performance of dental zirconia10.1631/jzus.B2000448 ↗
4. The influence of Y-TZP surface treatment on topography and ceramic/resin cement interfacial fracture toughness10.1016/j.dental.2017.06.004 ↗
5. Preliminary studies on the effects of in situ synthesized polycrystalline particulates on the bonding strength of resin to zirconia ceramic surface10.1016/j.apsusc.2015.09.034 ↗
6. Ammarullah, M., Santoso, G., Sugiharto, S., Supriyono, T., Wibowo, D., Kurdi, O., Tauviqirrahman, M., and Jamari, J. (2022). Minimizing risk of failure from ceramic-on-ceramic total hip prosthesis by selecting ceramic materials based on Tresca stress. Sustainability, 14.10.3390/su142013413 ↗
7. Effect of cleaning protocol on silica deposition and silica-mediated bonding to Y-TZP10.1016/j.dental.2019.08.099 ↗
8. Fracture strength of lithium disilicate cantilever resin bonded fixed dental prosthesis10.1016/j.jmbbm.2019.103615 ↗
9. Al-Zordk, W., Saudi, A., Abdelkader, A., Taher, M., and Ghazy, M. (2021). Fracture resistance and failure mode of mandibular molar restored by occlusal veneer: Effect of material type and dental bonding surface. Materials, 14.10.3390/ma14216476 ↗
10. Influence of sandblasting granulometry and resin cement composition on microtensile bond strength to zirconia ceramic for dental prosthetic frameworks10.1016/j.jdent.2012.09.013 ↗
11. Optimal sandblasting conditions for conventional-type yttria-stabilized tetragonal zirconia polycrystals10.1016/j.dental.2018.11.009 ↗
12. Effects of silane- and MDP-based primers application orders on zirconia-resin adhesion-A ToF-SIMS study10.1016/j.dental.2017.04.027 ↗
13. Effect of silane and MDP-based primers on physico-chemical properties of zirconia and its bond strength to resin cement10.1016/j.dental.2019.07.008 ↗
14. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
15. Effect of reduced airborne-particle abrasion pressure on the retention of zirconia copings resin bonded to titanium abutments10.1016/j.prosdent.2019.07.001 ↗
16. Influence of elapsed time between airborne-particle abrasion and bonding to zirconia bond strength10.1016/j.dental.2020.12.010 ↗
17. Sol-gel dip coating of yttria-stabilized tetragonal zirconia dental ceramic by aluminosilicate nanocomposite as a novel technique to improve the bonding of veneering porcelain10.2147/IJN.S104885 ↗
18. Shear bond strength of composite cement to alumina-coated versus tribochemical silica-treated zirconia10.1016/j.jmbbm.2020.103710 ↗
19. Silica coating of zirconia by silicon nitride hydrolysis on adhesion promotion of resin to zirconia10.1016/j.msec.2014.10.029 ↗
20. Surface modification for enhanced silanation of zirconia ceramics10.1016/j.dental.2009.03.008 ↗
21. Nanosilica coating for bonding improvements to zirconia
22. Kang, C., Lin, D., Feng, S., Hung, C., Iwaguro, S., and Peng, T. (2022). Innovation glass-ceramic spray deposition technology improving the adhesive performance for zirconium-based dental restorations. Int. J. Mol. Sci., 23.10.3390/ijms232112783 ↗
23. Effects of glass-ceramic spray deposition manipulation on the surface characteristics of zirconia dental restorations10.1016/j.ceramint.2022.06.252 ↗
24. Durability of resin bonding to zirconia using products containing 10-methacryloyloxydecyl dihydrogen phosphate
25. Duma, S., and Ilie, N. (2022). Adhesion to a CAD/CAM composite: Causal factors for a reliable long-term bond. J. Funct. Biomater., 13.10.3390/jfb13040217 ↗
26. Ali, A., Chiang, Y.W., and Santos, R.M. (2022). X-ray diffraction techniques for mineral characterization: A review for engineers of the fundamentals, applications, and research directions. Minerals, 12.10.3390/min12020205 ↗
27. Jing, H.H., Bardakci, F., Akgöl, S., Kusat, K., Adnan, M., Alam, M.J., Gupta, R., Sahreen, S., Chen, Y., and Gopinath, S.C.B. (2023). Green carbon dots: Synthesis, characterization, properties and biomedical applications. J. Funct. Biomater., 14.10.3390/jfb14010027 ↗
28. Catauro, M., Barrino, F., Bononi, M., Colombini, E., Giovanardi, R., Veronesi, P., and Tranquillo, E. (2019). Coating of titanium substrates with ZrO2 and ZrO2-SiO2 composites by sol-gel synthesis for biomedical applications: Structural characterization, mechanical and corrosive behavior. Coatings, 9.10.3390/coatings9030200 ↗
29. Kravanja, K.A., and Finšgar, M. (2021). Analytical techniques for the characterization of bioactive coatings for orthopaedic implants. Biomedicines, 9.10.3390/biomedicines9121936 ↗
30. Effect of tribochemical silica coating or multipurpose products on bonding performance of a CAD/CAM resin-based material10.1016/j.jmbbm.2018.10.034 ↗
31. Shear bond strength of a denture base acrylic resin and gingiva-colored indirect composite material to zirconia ceramics10.1016/j.jpor.2016.07.007 ↗
32. Effect of priming agents on shear bond strengths of resin-based luting agents to a translucent zirconia material10.1016/j.jpor.2017.08.011 ↗
33. Yttria-stabilized tetragonal zirconia polycrystal/resin luting agent bond strength: Influence of Titanium dioxide nanotubes addition in both materials10.1016/j.jpor.2019.11.005 ↗
34. Laser all-ceramic crown removal-a laboratory proof-of-principle study-phase 1 material characteristics10.1002/lsm.22279 ↗
35. Characterization of combustion synthesized zirconia powder by UV-vis, IR and other techniques10.1007/BF02708383 ↗
36. Characterization, Luminescence, and Defect Centers of a Ce3+-Doped Li2Si2O5 Phosphor Prepared by a Solution Combustion Reaction10.1007/s11664-015-3763-z ↗
37. Structural and compositional characterization of RF magnetron cosputtered lithium silicate films: From Li2Si2O5 to lithium-rich Li8SiO610.1116/1.4998726 ↗
38. Role of manganese on the structure, crystallization and sintering of non-stoichiometric lithium disilicate glasses10.1039/c3ra46393a ↗
39. Bonding to oxide ceramics-laboratory testing versus clinical outcome10.1016/j.dental.2014.06.007 ↗
40. Aging resistance of surface-treated dental zirconia10.1016/j.dental.2014.11.018 ↗
41. Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis10.1016/j.dental.2016.03.021 ↗
42. Raszewski, Z., Brząkalski, D., Derpeński, Ł., Jałbrzykowski, M., and Przekop, R. (2022). Aspects and principles of material connections in restorative dentistry - A comprehensive review. Materials, 15.10.3390/ma15207131 ↗
43. Kwon, S., Min, B., Kim, Y., and Kwon, T. (2020). Influence of sandblasting particle size and pressure on resin bonding durability to zirconia: A residual stress study. Materials, 13.10.3390/ma13245629 ↗
44. Stawarczyk, Impact of different pretreatments and aging procedures on the flexural strength and phase structure of zirconia ceramics10.1016/j.dental.2019.07.020 ↗
45. Comparison of the mechanical properties of translucent zirconia and lithium disilicate10.1016/j.prosdent.2017.08.004 ↗
46. Influence of glass-ceramic coating on composite zirconia bonding and its characterization10.1016/j.dental.2018.11.001 ↗
47. Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better?10.1016/j.dental.2015.12.014 ↗
48. Surface characterization of dental Y-TZP ceramic after air abrasion treatment10.1016/j.jdent.2012.05.003 ↗
49. Adsorption of trimethylamine on zirconium silicate and polyethylene powder surfaces10.1016/j.colsurfa.2007.05.076 ↗
50. Bonding and XPS chemical shifts in ZrSiO4 versus SiO2 and ZrO2: Charge transfer and electrostatic effects10.1103/PhysRevB.63.125117 ↗
51. Zirconia–alumina mixing in alumina-supported zirconia prepared by impregnation with solutions of zirconium acetylacetonate10.1039/b300899a ↗
52. Recent advances in X-ray photoelectron spectroscopy studies of oxides10.1116/1.577464 ↗
53. Sintering and Crystallization of a Glass Powder in the Li2O-ZrO2-SiO2 System10.1111/j.1151-2916.1998.tb02411.x ↗
54. Low temperature synthesis of a new yellowish brown ceramic pigment based on FeNbO4@ZrSiO410.1016/j.ceramint.2018.04.060 ↗
55. Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance10.1016/j.jpor.2017.06.002 ↗
56. Effect of an experimental zirconia-silica coating technique on micro tensile bond strength of zirconia in different priming conditions10.1016/j.dental.2012.04.020 ↗
57. Bond strength durability of self-adhesive resin cements to zirconia ceramic: An In Vitro study10.1016/j.prosdent.2018.03.026 ↗
58. Resin bond strength to translucent zirconia: A 2-year follow-up10.1016/j.ijadhadh.2021.102930 ↗
59. External gap progression after cyclic fatigue of adhesive overlays and crowns made with high translucency zirconia or lithium silicate10.1111/jerd.12837 ↗
60. Putra, R.U., Basri, H., Prakoso, A.T., Chandra, H., Ammarullah, M.I., Akbar, I., Syahrom, A., and Kamarul, T. (2023). Level of activity changes increases the fatigue life of the porous magnesium scaffold, as observed in dynamic immersion tests, over time. Sustainability, 15.10.3390/su15010823 ↗