journal article·2023-09-05Open access

Fibrinogen-Based Bioink for Application in Skin Equivalent 3D Bioprinting

Aida Cavallo, Tamer Al Kayal, Angelica Mero, Andrea Mezzetta, Lorenzo Guazzelli, Giorgio Soldani, Paola Losi

Abstract

Three-dimensional bioprinting has emerged as an attractive technology due to its ability to mimic native tissue architecture using different cell types and biomaterials. Nowadays, cell-laden bioink development or skin tissue equivalents are still at an early stage. The aim of the study is to propose a bioink to be used in skin bioprinting based on a blend of fibrinogen and alginate to form a hydrogel by enzymatic polymerization with thrombin and by ionic crosslinking with divalent calcium ions. The biomaterial ink formulation, composed of 30 mg/mL of fibrinogen, 6% of alginate, and 25 mM of CaCl2, was characterized in terms of homogeneity, rheological properties, printability, mechanical properties, degradation rate, water uptake, and biocompatibility by the indirect method using L929 mouse fibroblasts. The proposed bioink is a homogeneous blend with a shear thinning behavior, excellent printability, adequate mechanical stiffness, porosity, biodegradability, and water uptake, and it is in vitro biocompatible. The fibrinogen-based bioink was used for the 3D bioprinting of the dermal layer of the skin equivalent. Three different normal human dermal fibroblast (NHDF) densities were tested, and better results in terms of viability, spreading, and proliferation were obtained with 4 × 106 cell/mL. The skin equivalent was bioprinted, adding human keratinocytes (HaCaT) through bioprinting on the top surface of the dermal layer. A skin equivalent stained by live/dead and histological analysis immediately after printing and at days 7 and 14 of culture showed a tissuelike structure with two distinct layers characterized by the presence of viable and proliferating cells. This bioprinted skin equivalent showed a similar native skin architecture, paving the way for its use as a skin substitute for wound healing applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Cell Image Analysis Techniques · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Life Sciences, Scuola Superiore Sant’Anna, 56127 Pisa, Italy

Institute of Clinical Physiology, National Research Council, 54100 Massa, Italy

Department of Pharmacy, University of Pisa, 56126 Pisa, Italy

Funding

Vassili Fotis

References (49)

Show source-provided references
1. Bhaskar, B., Sreenivasa Rao, P., Kasoju, N., Nagarjuna, V., and Baadhe, R.R. (2021). Biomaterials in Tissue Engineering and Regenerative Medicine, Springer.10.1007/978-981-16-0002-9 ↗
2. The Biology of Burn Injury10.1111/j.1600-0625.2010.01105.x ↗
3. 3D Scaffolds in the Treatment of Diabetic Foot Ulcers: New Trends vs. Conventional Approaches10.1016/j.ijpharm.2021.120423 ↗
4. 3D Bioprinting of Tissue-Specific Osteoblasts and Endothelial Cells to Model the Human Jawbone10.1038/s41598-021-84483-4 ↗
5. Skin Bioprinting: A Novel Approach for Creating Artificial Skin from Synthetic and Natural Building Blocks10.1007/s40204-018-0087-0 ↗
6. Malekpour, A., and Chen, X. (2022). Printability and Cell Viability in Extrusion-Based Bioprinting from Experimental, Computational, and Machine Learning Views. J. Funct. Biomater., 13.10.3390/jfb13020040 ↗
7. Fatimi, A., Okoro, O.V., Podstawczyk, D., Siminska-Stanny, J., and Shavandi, A. (2022). Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review. Gels, 8.10.3390/gels8030179 ↗
8. Hydrogel-Based 3D Bioprinting: A Comprehensive Review on Cell-Laden Hydrogels, Bioink Formulations, and Future Perspectives10.1016/j.apmt.2019.100479 ↗
9. Al Kayal, T., Buscemi, M., Cavallo, A., Foffa, I., Soldani, G., and Losi, P. (2022). Plasminogen-Loaded Fibrin Scaffold as Drug Delivery System for Wound Healing Applications. Pharmaceutics, 14.10.3390/pharmaceutics14020251 ↗
10. Fibrin-Based Delivery Strategies for Acute and Chronic Wound Healing10.1016/j.addr.2017.12.007 ↗
11. The Mechanical Properties of Fibrin for Basic Scientists and Clinicians10.1016/j.bpc.2004.07.029 ↗
12. Development of an Effective Three Dimensional Fabrication Technique Using Inkjet Technology for Tissue Model Samples
13. Human Microvasculature Fabrication Using Thermal Inkjet Printing Technology10.1016/j.biomaterials.2009.07.056 ↗
14. Strategies to Use Fibrinogen as Bioink for 3D Bioprinting Fibrin-Based Soft and Hard Tissues10.1016/j.actbio.2020.09.024 ↗
15. Exploring the Potential of Alginate-Gelatin-Diethylaminoethyl Cellulose-Fibrinogen Based Bioink for 3D Bioprinting of Skin Tissue Constructs
16. An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix10.1016/j.biomaterials.2010.01.111 ↗
17. Bioprinting of Three-Dimensional Dentin–Pulp Complex with Local Differentiation of Human Dental Pulp Stem Cells10.1177/2041731419845849 ↗
18. Efficient Dual Crosslinking of Protein–in–Polysaccharide Bioink for Biofabrication of Cardiac Tissue Constructs10.1016/j.bioadv.2023.213486 ↗
19. Multicomponent Polysaccharide Alginate-Based Bioinks10.1039/D0TB01005G ↗
20. Patient-Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds10.1002/adhm.201701347 ↗
21. Cavallo, A., Al Kayal, T., Mero, A., Mezzetta, A., Pisani, A., Foffa, I., Vecoli, C., Buscemi, M., Guazzelli, L., and Soldani, G. (2023). Marine Collagen-Based Bioink for 3D Bioprinting of a Bilayered Skin Model. Pharmaceutics, 15.10.3390/pharmaceutics15051331 ↗
22. Evaluation of Bioink Printability for Bioprinting Applications10.1063/1.5053979 ↗
23. Sterilization Methods and Their Influence on Physicochemical Properties and Bioprinting of Alginate as a Bioink Component10.1021/acsomega.9b04096 ↗
24. Fabrication of Three-Dimensional Bioplotted Hydrogel Scaffolds for Islets of Langerhans Transplantation10.1088/1758-5090/7/2/025009 ↗
25. Bio-Ink Properties and Printability for Extrusion Printing Living Cells10.1039/c3bm00012e ↗
26. Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs10.1089/ten.tec.2010.0093 ↗
27. Assessing Bioink Shape Fidelity to Aid Material Development in 3D Bioprinting10.1088/1758-5090/aa90e2 ↗
28. Assessment methodologies for extrusion-based bioink printability10.1088/1758-5090/ab6f0d ↗
29. Bioink Properties before, during and after 3D Bioprinting10.1088/1758-5090/8/3/032002 ↗
30. Printability and Shape Fidelity of Bioinks in 3D Bioprinting10.1021/acs.chemrev.0c00084 ↗
31. A Comparison of Different Bioinks for 3D Bioprinting of Fibrocartilage and Hyaline Cartilage10.1088/1758-5090/8/4/045002 ↗
32. A Custom Ultra-Low-Cost 3D Bioprinter Supports Cell Growth and Differentiation10.3389/fbioe.2020.580889 ↗
33. 3D Bioprinting of Cell-Laden Nano-Attapulgite/Gelatin Methacrylate Composite Hydrogel Scaffolds for Bone Tissue Repair10.1016/j.jmst.2022.07.011 ↗
34. Effect of Varying Cell Densities on the Rheological Properties of the Bioink10.1016/j.bprint.2022.e00241 ↗
35. Effect of Bioink Properties on Printability and Cell Viability for 3D Bioplotting of Embryonic Stem Cells10.1088/1758-5090/8/3/035020 ↗
36. Skin Mechanical Properties and Modeling: A Review10.1177/0954411918759801 ↗
37. Biomechanical Properties of in Vivo Human Skin from Dynamic Optical Coherence Elastography10.1109/TBME.2009.2033464 ↗
38. Mechanical Behaviour of Skin: A Review
39. Novel Antibiotic-Eluting Wound Dressings: An in Vitro Study and Engineering Aspects in the Dressing’s Design10.1016/j.jtv.2009.11.001 ↗
40. Tunable Metacrylated Silk Fibroin-Based Hybrid Bioinks for the Bioprinting of Tissue Engineering Scaffolds10.1039/D2BM01978G ↗
41. Recombinant Human Collagen-Based Bioinks for the 3D Bioprinting of Full-Thickness Human Skin Equivalent10.18063/ijb.v8i4.611 ↗
42. In Vitro Characterisation of 3D Printed Platelet Lysate-Based Bioink for Potential Application in Skin Tissue Engineering10.1016/j.actbio.2021.01.021 ↗
43. Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior10.1038/s41598-018-26407-3 ↗
44. Control of Scaffold Degradation in Tissue Engineering: A Review10.1089/ten.teb.2013.0452 ↗
45. Fused Deposition Modeling of Novel Scaffold Architectures for Tissue Engineering Applications10.1016/S0142-9612(01)00232-0 ↗
46. Optimization of mechanical stiffness and cell density of 3D bioprinted cell-laden scaffolds improves extracellular matrix mineralization and cellular organization for bone tissue engineering10.1016/j.actbio.2020.07.016 ↗
47. The effect of cell density on the maturation and contractile ability of muscle derived cells in a 3D tissue-engineered skeletal muscle model and determination of the cellular and mechanical stimuli required for the synthesis of a postural phenotype10.1002/jcp.22271 ↗
48. Proof-of-Concept: 3D Bioprinting of Pigmented Human Skin Constructs10.1088/1758-5090/aa9e1e ↗
49. Three Dimensional Bioprinting of a Vascularized and Perfusable Skin Graft Using Human Keratinocytes, Fibroblasts, Pericytes, and Endothelial Cells10.1089/ten.tea.2019.0201 ↗