Show source-provided references
2. Practical strategy to construct anti-osteosarcoma bone substitutes by loading cisplatin into 3D-printed titanium alloy implants using a thermosensitive hydrogel
3. Avila, J.D., Bose, S., and Bandyopadhyay, A. (2018). Additive manufacturing of titanium and titanium alloys for biomedical applications. Titanium in Medical and Dental Applications, Elsevier.
10.1016/B978-0-12-812456-7.00015-9 ↗4. A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction
10.1016/j.eng.2020.02.019 ↗5. Custom 3D printed titanium reconstruction plate with in-situ tissue engineering for the reconstruction and dental rehabilitation of a severely infected atrophic mandible. A review of technique
10.1016/j.dentre.2021.100005 ↗6. In vitro comparison of personalized 3D printed versus standard expandable titanium vertebral body replacement implants in the mid-thoracic spine using entire rib cage specimens
10.1016/j.clinbiomech.2020.105070 ↗7. Froes, F.H., and Qian, M. (2018). Anatomics 3D-printed titanium implants from head to heel. Titanium in Medical and Dental Applications, Woodhead Publishing.
8. Advances in Translational 3D Printing for Cartilage, Bone, and Osteochondral Tissue Engineering
10.1002/smll.202201869 ↗11. Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: Prospect development
10.1016/j.jallcom.2021.163072 ↗15. 3D X-ray micro-computed tomography imaging for the microarchitecture evaluation of porous metallic implants and scaffolds
10.1016/j.micron.2020.102994 ↗16. Improved osseointegration of 3D printed Ti-6Al-4V implant with a hierarchical micro/nano surface topography: An in vitro and in vivo study
10.1016/j.msec.2020.111505 ↗17. In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PμSL) 3D printing technique: Defects characterization and in-situ shear test
10.1016/j.compstruct.2020.112710 ↗19. X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
10.1089/3dp.2018.0060 ↗20. Characterisation of additively manufactured metal surfaces by means of X-ray computed tomography and generalised surface texture parameters
10.1016/j.cirp.2019.04.074 ↗21. Celesti, C., Gervasi, T., Cicero, N., Giofrè, S.V., Espro, C., Piperopoulos, E., Gabriele, B., Mancuso, R., Lo Vecchio, G., and Iannazzo, D. (2022). Titanium Surface Modification for Implantable Medical Devices with Anti-Bacterial Adhesion Properties. Materials, 15.
10.3390/ma15093283 ↗23. Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface
10.1021/acsami.6b05893 ↗25. Triggering the hydroxyapatite deposition on the surface of PEO-coated Ti–6Al–4V alloy via the dual incorporation of Zn and Mg ions
10.1016/j.jallcom.2019.153038 ↗27. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: Principle, structure, and performance
10.1016/j.pmatsci.2020.100735 ↗29. Effects of co-incorporated ternary elements on biocorrosion stability, antibacterial efficacy, and cytotoxicity of plasma electrolytic oxidized titanium for implant dentistry
10.1016/j.matchemphys.2021.125436 ↗33. Physico-chemical and biological evaluation of doxycycline loaded into hybrid oxide-polymer layer on Ti–Mo alloy
35. In vivo evaluation of an antibacterial coating containing halogenated furanone compound-loaded poly(L-lactic acid) nanoparticles on microarc-oxidized titanium implants
10.2147/IJN.S100763 ↗36. Role of the electrolyte composition in establishing plasma discharges and coating growth process during a micro-arc oxidation
10.1016/j.surfcoat.2020.126349 ↗38. Effect of electrolyte composition on the microstructure and bio-corrosion behavior of micro-arc oxidized coatings on biomedical Ti6Al4V alloy
10.1016/j.jmrt.2019.11.073 ↗39. Tverdokhlebov, S.I., Bolbasov, E.N., Soldatova, E.A., Markov, A.B., Myagkov, A.S., Petrov, V.I., and Makeev, V.A. (2019). Impul’snyy Generator [The Pulse Generator]. (2718420), RF Patent.
44. (2009). Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements (Standard No. ASTM G59-97(2009)). In Annual Book of ASTM Standards.
45. (2022, June 13). Microfocus X-ray Source L9181-02. Available online: https://www.hamamatsu.com/eu/en/product/type/L9181-02/index.html.
46. (2022, October 02). Dynamic High Resolution X-ray Flat Panels Prodis.Mark (CMOS)-PRODIS.NDT. Available online: https://prodis-tech.ru/en/dynamic-high-resolution-x-ray-flat-panels-prodis-mark/.
47. (2022, October 02). VGSTUDIO MAX. Available online: https://www.volumegraphics.com/en/products/vgsm.html.
48. Isolating adipose-derived mesenchymal stem cells from lipoaspirate blood and saline fraction
10.4161/org.6.1.10019 ↗49. Ghasemi, M., Turnbull, T., Sebastian, S., and Kempson, I. (2021). The MTT Assay: Utility, Limitations, Pitfalls, and Interpretation in Bulk and Single-Cell Analysis. Int. J. Mol. Sci., 22.
10.3390/ijms222312827 ↗50. Ryu, J.-H., Kang, T.-Y., Shin, H., Kim, K.-M., Hong, M.-H., and Kwon, J.-S. (2020). Osteogenic Properties of Novel Methylsulfonylmethane-Coated Hydroxyapatite Scaffold. Int. J. Mol. Sci., 21.
10.3390/ijms21228501 ↗53. Preparation and performance of MAO coatings obtained on AZ91D Mg alloy under unipolar and bipolar modes in a novel dual electrolyte
10.1016/j.ceramint.2013.05.108 ↗54. Effects of processing parameters on the adhesion and corrosion resistance of oxide coatings grown by plasma electrolytic oxidation on AZ31 magnesium alloys
10.1016/j.jmrt.2020.12.108 ↗55. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: A review
10.1016/j.jma.2020.05.001 ↗56. Liu, W., Pu, Y., Liao, H., Lin, Y., and He, W. (2020). Corrosion and Wear Behavior of PEO Coatings on D16T Aluminum Alloy with Different Concentrations of Graphene. Coatings, 10.
10.3390/coatings10030249 ↗57. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone
10.1039/C7TB00741H ↗58. Microstructure and corrosion resistance of novel β-type titanium alloys manufactured by selective laser melting
10.1016/j.jmrt.2022.07.021 ↗61. A review on the mechanical properties for thin film and block structure characterised by using nanoscratch test
10.1515/ntrev-2019-0055 ↗63. Dong, H. (2010). Plasma electrolytic oxidation treatment of aluminium and titanium alloys. Surface Engineering of Light Alloys, Woodhead Publishing.
10.1533/9781845699451 ↗64. Nitrogen-doped titanium dioxide films fabricated via magnetron sputtering for vascular stent biocompatibility improvement
10.1016/j.jcis.2022.06.114 ↗65. Deposition of calcium in an in vitro model of human breast tumour calcification reveals functional role for ALP activity, altered expression of osteogenic genes and dysregulation of the TRPM7 ion channel
10.1038/s41598-018-36496-9 ↗66. Polylactic acid nano- and microchamber arrays for encapsulation of small hydrophilic molecules featuring drug release via high intensity focused ultrasound
10.1039/C7NR01841J ↗67. Sindeeva, O.A., Prikhozhdenko, E.S., Schurov, I., Sedykh, N., Goriainov, S., Karamyan, A., Mordovina, E.A., Inozemtseva, O.A., Kudryavtseva, V., and Shchesnyak, L.E. (2021). Patterned Drug-Eluting Coatings for Tracheal Stents Based on PLA, PLGA, and PCL for the Granulation Formation Reduction: In Vivo Studies. Pharmaceutics, 13.
10.3390/pharmaceutics13091437 ↗68. Patterned Microstructure Fabrication: Polyelectrolyte Complexes vs Polyelectrolyte Multilayers
10.1038/srep37000 ↗70. The Anatase Phase of Nanotopography Titania with Higher Roughness Has Better Biocompatibility in Osteoblast Cell Morphology and Proliferation
10.1155/2020/4071508 ↗71. Osseointegrating and Phase-Oriented Micro-Arc-Oxidized Titanium Dioxide Bone Implants
72. Evaluation of Thin Amorphous Calcium Phosphate Coatings on Titanium Dental Implants Deposited Using Magnetron Sputtering
10.1097/ID.0000000000000098 ↗73. Differences of Bone Bonding Ability and Degradation Behaviour in Vivo between Amorphous Calcium Phosphate and Highly Crystalline Hydroxyapatite Coating
10.1016/0142-9612(95)00357-6 ↗