Mechanical Surface Treatments for Controlling Surface Integrity and Corrosion Resistance of Mg Alloy Implants: A Review
Source abstract
Abstract
The present paper aims to provide an overview of the current state-of-the-art mechanical surface modification technologies and their response in terms of surface roughness, surface texture, and microstructural change due to cold work-hardening, affecting the surface integrity and corrosion resistance of different Mg alloys. The process mechanics of five main treatment strategies, namely, shot peening, surface mechanical attrition treatment, laser shock peening, ball burnishing, and ultrasonic nanocrystal surface modification, were discussed. The influence of the process parameters on plastic deformation and degradation characteristics was thoroughly reviewed and compared from the perspectives of surface roughness, grain modification, hardness, residual stress, and corrosion resistance over short- and long-term periods. Potential and advances in new and emerging hybrid and in-situ surface treatment strategies were comprehensively eluded and summarised. This review takes a holistic approach to identifying the fundamentals, pros, and cons of each process, thereby contributing to bridging the current gap and challenge in surface modification technology for Mg alloys. To conclude, a brief summary and future outlook resulting from the discussion were presented. The findings would offer a useful insight and guide for researchers to focus on developing new surface treatment routes to resolve surface integrity and early degradation problems for successful application of biodegradable Mg alloy implants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
UniSA STEM, University of South Australia, Mawson Lakes, SA 5095, Australia
Future Industries Institute, University of South Australia, Mawson Lakes, SA 5095, Australia
References (92)
Show source-provided references
1. Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants10.1016/j.surfcoat.2012.10.023 ↗
2. Review of magnesium-based biomaterials and their applications10.1016/j.jma.2018.02.003 ↗
3. Stress shielding and bone resorption in shoulder arthroplasty10.1067/mse.2003.22 ↗
4. The effect of hydrogen gas evolution of magnesium implant on the postimplantation mortality of rats
5. Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD)10.1016/j.msec.2014.03.023 ↗
6. Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy10.1016/j.corsci.2011.12.018 ↗
7. Monteiro, W.A., Buso, S.J., and Da, L.V. (2012). New Features on Magnesium Alloys, IntechOpen.10.5772/2810 ↗
8. Research Progress on Surface Treatments of Biodegradable Mg Alloys: A Review10.1021/acsomega.9b03423 ↗
9. The influence of mechanical surface treatments on fatigue behavior of extruded AZ61 magnesium alloy10.1016/j.msea.2012.04.007 ↗
10. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants10.1088/1468-6996/16/5/053501 ↗
11. Surface design of biodegradable magnesium alloys—A review10.1016/j.surfcoat.2012.10.009 ↗
12. Evaluation of corrosion resistance, mechanical integrity loss and biocompatibility of PCL/HA/TiO2 hybrid coated biodegradable ZM21 Mg alloy10.1016/j.jma.2021.10.004 ↗
13. Strbak, M., Kajanek, D., Knap, V., Florkova, Z., Pastorkova, J., Hadzima, B., and Goraus, M. (2022). Effect of Plasma Electrolytic Oxidation on the Short-Term Corrosion Behaviour of AZ91 Magnesium Alloy in Aggressive Chloride Environment. Coatings, 12.10.3390/coatings12050566 ↗
14. Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface10.1016/j.actbio.2016.09.005 ↗
15. Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation10.1016/j.bioactmat.2022.05.009 ↗
16. Biocompatible Magnesium Alloys as Absorbable Implant Materials–Adjusted Surface and Subsurface Properties by Machining Processes10.1016/j.cirp.2007.05.029 ↗
17. Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg–Zn–Ca alloy and investigation of corrosion behavior10.1088/2053-1591/ab40f2 ↗
18. Effect of severe shot peening on corrosion behavior of AZ31 and AZ91 magnesium alloys10.1016/j.jallcom.2018.08.141 ↗
19. Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid10.1016/j.surfcoat.2016.12.093 ↗
20. Effect of surface mechanical attrition treatment on biodegradable Mg–1Ca alloy10.1016/j.msec.2013.11.010 ↗
21. Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: Influence on strain hardening and texture evolution10.1016/j.actamat.2017.03.075 ↗
22. Widiantara, I.P., Yang, H.W., Kamil, M.P., Yoon, D.K., and Ko, Y.G. (2018). Grain Refinement by Extension Twin in Mg Alloy during Asymmetrical Rolling. Metals, 8.10.3390/met8110891 ↗
23. Crystal orientation and electrochemical corrosion of polycrystalline Mg10.1016/j.corsci.2012.05.019 ↗
24. Microstructure controls the corrosion behavior of a lean biodegradable Mg–2Zn alloy10.1016/j.actbio.2020.02.040 ↗
25. Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
26. Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5Zr and Mg–10Gd–3Y–0.5Zr magnesium alloys by shot peening10.1016/j.ijplas.2013.02.015 ↗
27. Shot peening on the high-strength wrought magnesium alloy AZ80—Effect of peening media10.1016/j.jmatprotec.2009.10.005 ↗
28. Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy10.1016/j.surfcoat.2020.126285 ↗
29. Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ3110.1016/j.actbio.2017.11.032 ↗
30. Microstructure, mechanical and corrosion properties of magnesium alloy bone plate treated by high-energy shot peening10.1016/S1003-6326(19)65071-5 ↗
31. Patil, T. (2018). Effect of Shot Peening on Stress Corrosion Behavior of Biodegradable Magnesium WE43. [Ph.D. Thesis, University of Nebraska-Lincoln].
32. Influence of surface mechanical attrition treatment attrition media on the surface contamination and corrosion of magnesium10.5006/0763 ↗
33. Skowron, K., Dryzek, E., Wróbel, M., Nowak, P., Marciszko-Wiąckowska, M., Le Joncour, L., François, M., Panicaud, B., and Baczmański, A.J.M. (2020). Gradient Microstructure Induced by Surface Mechanical Attrition Treatment (SMAT) in Magnesium Studied Using Positron Annihilation Spectroscopy and Complementary Methods. Materials, 13.10.3390/ma13184002 ↗
34. Effect of surface mechanical attrition treatment on corrosion fatigue behavior of AZ31B magnesium alloy10.1016/j.ijfatigue.2019.06.031 ↗
35. Effect of surface nanocrystallization on the microstructural and corrosion characteristics of AZ91D magnesium alloy10.1016/j.jallcom.2011.06.094 ↗
36. Significant improvement of corrosion resistance of biodegradable metallic implants processed by laser shock peening10.1016/j.cirp.2012.03.125 ↗
37. Jufang, C., Jiangtao, W., Xuhong, C., and Weining, L. (2011, January 3–5). Effect of laser surface hardening on pitting corrosion resistance of AM50 magnesium alloy. Proceedings of the International Conference on Advanced Technology of Design and Manufacture (ATDM 2011), Changzhou, China.
38. Stress Corrosion Resistance of Laser Shock Peening/Microarc Oxidation Reconstruction Layer Fabricated on AZ80 Magnesium Alloy in Simulated Body Fluid10.1007/s11665-020-05076-2 ↗
39. Guo, Y., Wang, S., Liu, W., Xiao, T., Zhu, G., and Sun, Z. (2019). The Effect of Laser Shock Peening on the Corrosion Behavior of Biocompatible Magnesium Alloy ZK60. Metals, 9.10.3390/met9111237 ↗
40. Surface integrity and corrosion performance of biomedical magnesium-calcium alloy processed by hybrid dry cutting-finish burnishing10.1016/j.jmbbm.2017.11.026 ↗
41. Cao, C., Zhu, J., and Tanaka, T. (2019). Advanced Surface Enhancement: Proceedings of the 1st International Conference on Advanced Surface Enhancement (INCASE 2019)—Research Towards Industrialisation, Singapore, 10–13 September 2019, Springer.
42. A systematic study of mechanical properties, corrosion behavior and biocompatibility of AZ31B Mg alloy after ultrasonic nanocrystal surface modification10.1016/j.msec.2017.04.128 ↗
43. Corrosion performance of AZ31 magnesium alloy treated by ultrasonic impact peening (UIP)10.1016/j.matpr.2018.08.136 ↗
44. Control of magnesium in vitro degradation based on ultrafine-grained surface gradient structure using ultrasonic nanocrystalline surface modification10.1016/j.mtla.2020.100821 ↗
45. Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical and Corrosion Behavior of LZ91 Mg–Li Alloy10.2320/matertrans.MT-M2019314 ↗
46. Dislocation-based study on the influences of shot peening on fatigue resistance10.1016/j.surfcoat.2019.125247 ↗
47. Surface layer microstructures and wear properties modifications of Mg-8Gd-3Y alloy treated by shot peening10.1016/j.matchar.2019.109952 ↗
48. Gao, W., Wang, S., Wang, G., and Zhou, J. (2016, January 26–27). Effect of high energy shot peening on electrochemical corrosion resistance of WE43 magnesium alloy. Proceedings of the 2016 International Conference on Engineering Management (Iconf-EM 2016), Guangzhou, China.10.2991/iconfem-16.2016.42 ↗
49. A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution10.1016/j.jma.2015.02.004 ↗
50. Shot Peening Induced Corrosion Resistance of Magnesium Alloy WE4310.1016/j.mfglet.2022.07.025 ↗
51. A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material10.1016/j.surfcoat.2010.05.035 ↗
52. Review of passivity and electrochemical properties of nanostructured stainless steels obtained by surface mechanical attrition treatment (SMAT): Trend and progress10.1515/corrrev-2021-0072 ↗
53. Degradation of Mechanically Surface Treated AZ31B Magnesium Alloy in 3.5 wt.% NaCl Solution10.4028/www.scientific.net/MSF.948.237 ↗
54. Jianyue, Z. (2019). Effect of Ultrasonic Shot Peening on Mechanical Properties and Corrosion Resistance of MG Alloy Sheet. [Ph.D. Thesis, Purdue University Graduate School].
55. Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient10.1016/j.jallcom.2020.153691 ↗
56. Evolution of gradient structured layer on AZ91D magnesium alloy and its corrosion behaviour10.1016/j.jallcom.2021.160659 ↗
57. A study of the corrosion behavior of AZ31 Mg alloy in depth direction after surface nanocrystallization10.1016/j.surfcoat.2020.125968 ↗
58. Surface Grain Size Effects on the Corrosion of Magnesium10.4028/www.scientific.net/KEM.384.229 ↗
59. Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening10.3390/ma7127925 ↗
60. Zhou, W., Ren, X., Liu, F., Ren, Y., and Li, L. (2016). Nanocrystallization in the Duplex Ti-6Al-4V Alloy Processed by Multiple Laser Shock Peening. Metals, 6.10.3390/met6120297 ↗
61. Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy10.1016/j.apsusc.2018.06.176 ↗
62. Fatigue performance of biodegradable magnesium–calcium alloy processed by laser shock peening for orthopedic implants10.1016/j.ijfatigue.2015.08.024 ↗
63. Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing10.1016/j.matdes.2015.07.039 ↗
64. Improving electrochemical corrosion properties of AZ31 magnesium alloy via phosphate conversion with laser shock peening pretreatment10.1016/j.jallcom.2020.155837 ↗
65. Effects of coverage layer on the electrochemical corrosion behaviour of Mg-Al-Mn alloy subjected to massive laser shock peening treatment10.1016/j.jallcom.2018.12.224 ↗
66. Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium10.1016/j.optlastec.2016.09.003 ↗
67. Surface Integrity and Corrosion Performance of Biomedical Magnesium-calcium Alloy Processed by Hybrid Dry Cutting-finish Burnishing10.1016/j.promfg.2017.07.030 ↗
68. Analysis of surface roughness and hardness in ball burnishing of titanium alloy10.1016/j.measurement.2014.08.043 ↗
69. Fatigue behavior of a rolled AZ31 magnesium alloy after surface treatment by EP and BB conditions10.1016/j.aej.2011.01.004 ↗
70. Ultrafine-grained surface layer on Mg–Al–Zn alloy produced by cryogenic burnishing for enhanced corrosion resistance10.1016/j.scriptamat.2011.06.013 ↗
71. Cho, S.-Y., Kim, M.-S., Pyun, Y.-S., and Shim, D.-S. (2021). Strategy for Surface Post-Processing of AISI 316L Additively Manufactured by Powder Bed Fusion Using Ultrasonic Nanocrystal Surface Modification. Metals, 11.10.3390/met11050843 ↗
72. Effects of ultrasonic nanocrystalline surface modification on the tribological properties of AZ91D magnesium alloy10.1016/j.triboint.2012.04.024 ↗
73. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet10.1016/j.electacta.2010.02.068 ↗
74. Influence of Ball Burnishing Process on Equal Channel Angular Pressed Mg-Zn-Si Alloy on the Evolution of Microstructure and Corrosion Properties10.1007/s12633-020-00541-y ↗
75. Enhanced corrosion resistance of cold-sprayed and shot-peened aluminum coatings on LA43M magnesium alloy10.1016/j.surfcoat.2020.125865 ↗
76. Fabrication, characterisation and corrosion of HA coated AZ31B Mg implant material: Effect of electrodeposition current density10.1016/j.surfcoat.2020.125363 ↗
77. Synergistic effect of deep ball burnishing and HA coating on surface integrity, corrosion and immune response of biodegradable AZ31B Mg alloys10.1016/j.msec.2020.111459 ↗
78. Impact of shot peening on corrosion performance of AZ31 magnesium alloy coated by PEO: Comparison with conventional surface pre-treatments10.1016/j.surfcoat.2022.128773 ↗
79. Surface strengthening and grain refinement of AZ31B magnesium alloy by ultrasonic cavitation modification10.1016/j.cja.2020.08.043 ↗
80. Surface integrity of heat treatable magnesium alloy AZ80A after cavitation peening10.1016/j.jmrt.2022.01.156 ↗
81. Mohan, M., Radhakrishnan, M., and Natarajan, Y. (2021). Investigations on Water Jet Peening of AZ31B Mg Alloy for Bio Medical Implants. Res. Sq.10.21203/rs.3.rs-573898/v1 ↗
82. A burnished and Al-alloyed magnesium surface with improved mechanical and corrosion properties10.1016/j.corsci.2021.109395 ↗
83. On the effect upon the surface finish and mechanical performance of ball burnishing process on fused filament fabricated parts
84. Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition
85. Additive manufacturing of magnesium alloys10.1016/j.bioactmat.2019.12.004 ↗
86. Additive manufacturing of Mg alloys for biomedical applications: Current status and challenges10.1016/j.cobme.2021.100276 ↗
87. Material-property evaluation of magnesium alloys fabricated using wire-and-arc-based additive manufacturing
88. Effect of gelatin addition on fabrication of magnesium phosphate-based scaffolds prepared by additive manufacturing system10.1016/j.matlet.2014.06.055 ↗
89. Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy10.1016/j.matdes.2014.09.082 ↗
90. Effect of strontium substitution on the material properties and osteogenic potential of 3D powder printed magnesium phosphate scaffolds10.1016/j.msec.2019.01.053 ↗
91. Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium10.1108/RPJ-07-2013-0076 ↗
92. Gneiger, S., Koutny, D., Senck, S., Schnall, M., Papenberg, N., and Klein, T. (2022). Magnesium Technology 2022, Springer.