journal article·2023-04-07Open access

Cytotoxicity of Biodegradable Zinc and Its Alloys: A Systematic Review

Qian Liu, An Li, Shizhen Liu, Qingyun Fu, Yichen Xu, Jingtao Dai, Ping Li, Shulan Xu

Abstract

Zinc-based biodegradable metals (BMs) have been developed for biomedical implant materials. However, the cytotoxicity of Zn and its alloys has caused controversy. This work aims to investigate whether Zn and its alloys possess cytotoxic effects and the corresponding influence factors. According to the guidelines of the PRISMA statement, an electronic combined hand search was conducted to retrieve articles published in PubMed, Web of Science, and Scopus (2013.1–2023.2) following the PICOS strategy. Eighty-six eligible articles were included. The quality of the included toxicity studies was assessed utilizing the ToxRTool. Among the included articles, extract tests were performed in 83 studies, and direct contact tests were conducted in 18 studies. According to the results of this review, the cytotoxicity of Zn-based BMs is mainly determined by three factors, namely, Zn-based materials, tested cells, and test system. Notably, Zn and its alloys did not exhibit cytotoxic effects under certain test conditions, but significant heterogeneity existed in the implementation of the cytotoxicity evaluation. Furthermore, there is currently a relatively lower quality of current cytotoxicity evaluation in Zn-based BMs owing to the adoption of nonuniform standards. Establishing a standardized in vitro toxicity assessment system for Zn-based BMs is required for future investigations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center of Oral Implantology, Stomatological Hospital, School of Stomatology, Southern Medical University, Guangzhou 510280, China

The School of Computing Science, University of Glasgow, Glasgow G12 8RZ, UK

State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, Department of Oral Prosthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China

Funding

Guangdong Basic and Applied Basic Research Foundation · Science Research Cultivation Program of the Stomatological Hospital, Southern Medical University · Scientific Research Project of Traditional Chinese Medicine Bureau of Guangdong Province · Science and Technology Projects in Guangzhou

References (100+)

Show source-provided references
1. Current status and outlook on the clinical translation of biodegradable metals10.1016/j.mattod.2018.05.018 ↗
2. Fundamental theory of biodegradable metals—definition, criteria, and design10.1002/adfm.201805402 ↗
3. Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective10.1016/j.biomaterials.2016.10.017 ↗
4. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
5. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
6. Biodegradable Metals for Cardiovascular Stents: From Clinical Concerns to Recent Zn-Alloys10.1002/adhm.201501019 ↗
7. Recent advances in biodegradable metals for medical sutures: A critical review10.1002/adhm.201500189 ↗
8. The Prospects for Biodegradable Zinc in Wound Closure Applications10.1002/adhm.201900408 ↗
9. Research status of biodegradable metals designed for oral and maxillofacial applications: A review10.1016/j.bioactmat.2021.01.011 ↗
10. Chen, J., Yang, R., Shi, B., Xu, Y., and Huang, H. (2022). Obturator Manufacturing for Oronasal Fistula after Cleft Palate Repair: A Review from Handicraft to the Application of Digital Techniques. J. Funct. Biomater., 13.10.3390/jfb13040251 ↗
11. Xu, Y., Huang, H., Wu, M., Tian, Y., Wan, Q., Shi, B., Hu, T., and Spintzyk, S. (2022). Rapid Additive Manufacturing of a Superlight Obturator for Large Oronasal Fistula in Pediatric Patient. Laryngoscope.10.1002/lary.30352 ↗
12. Bedard, P., Gauvin, S., Ferland, K., Caneparo, C., Pellerin, E., Chabaud, S., and Bolduc, S. (2020). Innovative Human Three-Dimensional Tissue-Engineered Models as an Alternative to Animal Testing. Bioengineering, 7.10.3390/bioengineering7030115 ↗
13. Ex vivo determination of chitosan/curdlan/hydroxyapatite biomaterial osseointegration with the use of human trabecular bone explant: New method for biocompatibility testing of bone implants reducing animal tests10.1016/j.msec.2020.111612 ↗
14. Jung, O., Smeets, R., Hartjen, P., Schnettler, R., Feyerabend, F., Klein, M., Wegner, N., Walther, F., Stangier, D., and Henningsen, A. (2019). Improved In Vitro Test Procedure for Full Assessment of the Cytocompatibility of Degradable Magnesium Based on ISO 10993-5/-12. Int. J. Mol. Sci., 20.10.3390/ijms20020255 ↗
15. Test conditions can significantly affect the results of in vitro cytotoxicity testing of degradable metallic biomaterials10.1038/s41598-021-85019-6 ↗
16. Selection of extraction medium influences cytotoxicity of zinc and its alloys10.1016/j.actbio.2019.03.013 ↗
17. Evidence-based biomaterials research10.1016/j.bioactmat.2022.04.014 ↗
18. Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals10.1016/j.jmst.2013.03.019 ↗
19. In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants10.1177/0954411915584962 ↗
20. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy10.1002/jbm.b.33341 ↗
21. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys10.1016/j.msec.2015.08.015 ↗
22. Cytotoxicity evaluation of biodegradable Zn-3Mg alloy toward normal human osteoblast cells10.1016/j.msec.2015.01.056 ↗
23. Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants10.1016/j.matdes.2016.12.075 ↗
24. Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application10.1016/j.msec.2016.06.082 ↗
25. Influence of surface pre-treatment on the cytocompatibility of a novel biodegradable ZnMg alloy10.1016/j.msec.2016.05.114 ↗
26. In Vitro Evaluation of the Feasibility of Commercial Zn Alloys as Biodegradable Metals10.1016/j.jmst.2016.06.003 ↗
27. Mechanical properties, in vitro degradation behavior, hemocompatibility and cytotoxicity evaluation of Zn–1.2Mg alloy for biodegradable implants10.1039/C6RA14300H ↗
28. Evaluation of biodegradable Zn-1%Mg and Zn-1%Mg-0.5%Ca alloys for biomedical applications10.1007/s10856-017-5973-9 ↗
29. Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications10.1016/j.jmbbm.2017.05.013 ↗
30. Biological Responses and Mechanisms of Human Bone Marrow Mesenchymal Stem Cells to Zn and Mg Biomaterials10.1021/acsami.7b06654 ↗
31. Evaluation of as-extruded ternary Zn–Mg–Zr alloys for biomedical implantation material: In vitro and in vivo behavior10.1002/maco.201810648 ↗
32. Microstructure, mechanical properties, biocompatibility, and in vitro corrosion and degradation behavior of a new Zn-5Ge alloy for biodegradable implant materials10.1016/j.actbio.2018.10.015 ↗
33. Thin films of binary amorphous Zn-Zr alloys developed by magnetron co-sputtering for the production of degradable coronary stents: A preliminary study10.1016/j.bioactmat.2018.05.004 ↗
34. Assessment of the Biocompatibility and Biological Effects of Biodegradable Pure Zinc Material in the Colorectum10.1021/acsbiomaterials.8b00957 ↗
35. Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies10.1016/j.jmst.2018.01.006 ↗
36. Li, P., Schille, C., Schweizer, E., Rupp, F., Heiss, A., Legner, C., Klotz, U.E., Geis-Gerstorfer, J., and Scheideler, L. (2018). Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci., 19.10.3390/ijms19030755 ↗
37. Degradation behavior, cytotoxicity, hemolysis, and antibacterial properties of electro-deposited Zn-Cu metal foams as potential biodegradable bone implants10.1016/j.actbio.2019.11.031 ↗
38. Microstructure, Corrosion Behaviors in Different Simulated Body Fluids and Cytotoxicity of Zn–Li Alloy as Biodegradable Material10.2320/matertrans.M2018342 ↗
39. Additively manufactured biodegradable porous zinc10.1016/j.actbio.2019.10.034 ↗
40. Diameter-dependent in vitro performance of biodegradable pure zinc wires for suture application10.1016/j.jmst.2019.03.006 ↗
41. Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy10.1016/j.msec.2019.02.044 ↗
42. Response of human periosteal cells to degradation products of zinc and its alloy10.1016/j.msec.2019.110208 ↗
43. Systematical evolution on a Zn-Mg alloy potentially developed for biodegradable cardiovascular stents10.1007/s10856-019-6324-9 ↗
44. Investigation of zinccopper alloys as potential materials for craniomaxillofacial osteosynthesis implants10.1016/j.msec.2019.109826 ↗
45. Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration10.1016/j.msec.2019.01.120 ↗
46. Mechanical Strength, Biodegradation, and in Vitro and in Vivo Biocompatibility of Zn Biomaterials10.1021/acsami.8b20634 ↗
47. Rod-like Eutectic Structure in Biodegradable Zn-Al-Sn Alloy Exhibiting Enhanced Mechanical Strength10.1021/acsbiomaterials.0c00290 ↗
48. Biodegradable Zn-1.5Cu-1.5Ag alloy with anti-aging ability and strain hardening behavior for cardiovascular stents10.1016/j.msec.2020.111172 ↗
49. Avior, O., Ben Ghedalia-Peled, N., Ron, T., Vago, R., and Aghion, E. (2020). The Effect of Ca on In Vitro Behavior of Biodegradable Zn-Fe Alloy in Simulated Physiological Environments. Metals, 10.10.3390/met10121624 ↗
50. Enhancement in mechanical and corrosion resistance properties of a biodegradable Zn-Fe alloy through second phase refinement10.1016/j.msec.2020.111197 ↗
51. In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications10.1016/j.actbio.2020.03.009 ↗
52. Microstructure, biodegradable behavior in different simulated body fluids, antibacterial effect on different bacteria and cytotoxicity of rolled Zn–Li–Ag alloy10.1088/2053-1591/ab7226 ↗
53. Additively manufactured functionally graded biodegradable porous zinc10.1039/C9BM01904A ↗
54. Binary Zn–Ti alloys for orthopedic applications: Corrosion and degradation behaviors, friction and wear performance, and cytotoxicity10.1016/j.jmst.2020.10.031 ↗
55. Biodegradable ternary Zn-3Ge-0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications10.1016/j.actbio.2020.08.033 ↗
56. A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications10.1016/j.actbio.2020.02.017 ↗
57. Development of biodegradable Zn-1Mg-0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications10.1016/j.actbio.2020.09.036 ↗
58. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications10.1038/s41467-019-14153-7 ↗
59. Li, P., Schille, C., Schweizer, E., Kimmerle-Muller, E., Rupp, F., Han, X., Heiss, A., Richter, A., Legner, C., and Klotz, U.E. (2019). Evaluation of a Zn-2Ag-1.8Au-0.2V Alloy for Absorbable Biocompatible Materials. Materials, 13.10.3390/ma13010056 ↗
60. In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications10.1016/j.msec.2020.111007 ↗
61. Insight into role and mechanism of Li on the key aspects of biodegradable ZnLi alloys: Microstructure evolution, mechanical properties, corrosion behavior and cytotoxicity10.1016/j.msec.2020.111049 ↗
62. A pure zinc membrane with degradability and osteogenesis promotion for guided bone regeneration: In vitro and in vivo studies10.1016/j.actbio.2020.02.024 ↗
63. Mechanical performance and biocompatibility assessment of Zn-0.05wt%Mg-(0.5, 1 wt%) Ag alloys10.1002/jbm.b.34623 ↗
64. Ultrafine-grained Zn-0.45Li alloy with enhanced mechanical property, degradation behavior and cytocompatibility prepared by hot extrusion and multi-pass drawing10.1002/mawe.202100060 ↗
65. Biodegradable Zn-Sr alloy for bone regeneration in rat femoral condyle defect model: In vitro and in vivo studies10.1016/j.bioactmat.2020.11.007 ↗
66. Biological properties of Zn–0.04Mg–2Ag: A new degradable zinc alloy scaffold for repairing large-scale bone defects10.1016/j.jmrt.2021.05.096 ↗
67. Development of high strength and ductile Zn-Al-Li alloys for potential use in bioresorbable medical devices10.1016/j.msec.2021.111897 ↗
68. Rare earth improves strength and creep resistance of additively manufactured Zn implants10.1016/j.compositesb.2021.108882 ↗
69. Zinc alloy-based bone internal fixation screw with antibacterial and anti-osteolytic properties10.1016/j.bioactmat.2021.05.023 ↗
70. Milenin, A., Łukowicz, K., Truchan, K., and Osyczka, A.M. (2021). In vitro cytotoxicity of biodegradable Zn-Mg surgical wires in tumor and healthy cells. Acta Bioeng. Biomech., 23.10.37190/ABB-01927-2021-01 ↗
71. Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications10.1016/j.jmst.2020.06.052 ↗
72. Influence of the pre-exposure of a Zn-0.8Mg-0.2Sr absorbable alloy in bovine serum albumin containing media on its surface changes and their impact on the cytocompatibility of the material10.1016/j.mtcomm.2021.102556 ↗
73. Appropriately adapted properties of hot-extruded Zn-0.5Cu-xFe alloys aimed for biodegradable guided bone regeneration membrane application10.1016/j.bioactmat.2020.09.019 ↗
74. Zhu, P., Chen, J., Li, P., and Xu, S. (2021). Limitation of Water-Soluble Tetrazolium Salt for the Cytocompatibility Evaluation of Zinc-Based Metals. Materials, 14.10.3390/ma14216247 ↗
75. Impact of sterilization treatments on biodegradability and cytocompatibility of zinc-based implant materials10.1016/j.msec.2021.112430 ↗
76. Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8Mg-0.2Sr (wt%) as an absorbable material10.1016/j.msec.2021.111924 ↗
77. Stress Corrosion Analysis and Direct Cell Viability of Biodegradable Zn-Fe-Ca Alloy in In-Vitro Conditions10.3390/met12010076 ↗
78. Impact of gadolinium on mechanical properties, corrosion resistance, and biocompatibility of Zn-1Mg-xGd alloys for biodegradable bone-implant applications10.1016/j.actbio.2022.02.015 ↗
79. Biodegradable Zn-Cu-Mn alloy with suitable mechanical performance and in vitro degradation behavior as a promising candidate for vascular stents10.1016/j.msec.2022.112652 ↗
80. Feasibility evaluation of a Zn-Cu alloy for intrauterine devices: In vitro and in vivo studies10.1016/j.actbio.2022.01.053 ↗
81. Fabrication, in vitro and in vivo properties of porous Zn–Cu alloy scaffolds for bone tissue engineering10.1016/j.matchemphys.2022.126458 ↗
82. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: In vitro and in vivo studies10.1016/j.actbio.2022.03.055 ↗
83. Biodegradable Zn-Cu-Fe Alloy as a Promising Material for Craniomaxillofacial Implants: An in vitro Investigation into Degradation Behavior, Cytotoxicity, and Hemocompatibility10.3389/fchem.2022.860040 ↗
84. Experimental study on novel biodegradable Zn-Fe-Si alloys10.1002/jbm.b.35075 ↗
85. Liu, Y., Fu, Z., Chu, X., Lu, Y., Zhang, J., Huang, J., Liu, Y., Yan, Y., and Yu, K. (2022). Fabrication and characterization of A Zn-0.5Fe alloy membrane by powder metallurgy route for guided bone regeneration. Mater. Res. Express., 9.10.1088/2053-1591/ac743d ↗
86. Influence of Copper on the Microstructural, Mechanical, and Biological Properties of Commercially Pure Zn-Based Alloys for a Potential Biodegradable Implant10.1021/acsbiomaterials.1c01111 ↗
87. Gopal, N., Palaniyandi, P., Ramasamy, P., Panchal, H., Ibrahim, A.M.M., Alsoufi, M.S., and Elsheikh, A.H. (2022). In Vitro Degradability, Microstructural Evaluation, and Biocompatibility of Zn-Ti-Cu-Ca-P Alloy. Nanomaterials, 12.10.3390/nano12081357 ↗
88. Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition10.1016/j.jmst.2022.03.006 ↗
89. Novel Zn-2Cu-0.2Mn-xLi (x = 0, 0.1 and 0.38) alloys developed for potential biodegradable implant applications10.1016/j.jallcom.2022.165478 ↗
90. Strengthening mechanism and biocompatibility of degradable Zn-Mn alloy with different Mn content10.1016/j.mtcomm.2022.103639 ↗
91. Surface stabilization treatment enhances initial cell viability and adhesion for biodegradable zinc alloys10.1016/j.matlet.2019.04.006 ↗
92. Salt Preform Texturing of Absorbable Zn Substrates for Bone-implant Applications10.1007/s11837-019-03971-1 ↗
93. Improved biodegradability of zinc and its alloys by sandblasting treatment10.1016/j.surfcoat.2020.126678 ↗
94. Biodegradable Zn-Dy binary alloys with high strength, ductility, cytocompatibility, and antibacterial ability for bone-implant applications10.1016/j.actbio.2022.10.053 ↗
95. In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay10.1002/jbm.b.35147 ↗
96. Di, T., Xu, Y., Liu, D., and Sun, X. (2022). Microstructure, Mechanical Performance and Anti-Bacterial Activity of Degradable Zn-Cu-Ag Alloy. Metals, 12.10.3390/met12091444 ↗
97. Wang, Z., Wang, W., Zhang, X., Cao, F., Zhang, T., Bhakta Pokharel, D., Chen, D., Li, J., Yang, J., and Xiao, C. (2022). Modulation of Osteogenesis and Angiogenesis Activities Based on Ionic Release from Zn-Mg Alloys. Materials, 15.10.3390/ma15207117 ↗
98. Ben Tzion-Mottye, L., Ron, T., Eliezer, D., and Aghion, E. (2022). The Effect of Mn on the Mechanical Properties and In Vitro Behavior of Biodegradable Zn-2%Fe Alloy. Metals, 12.10.3390/met12081291 ↗
99. 300 MPa grade biodegradable high-strength ductile low-alloy (BHSDLA) Zn-Mn-Mg alloys: An in vitro study10.1016/j.jmst.2022.08.015 ↗
100. Microstructure, mechanical property and corrosion behavior of biomedical Zn-Fe alloy prepared by low-temperature sintering10.1016/j.jallcom.2022.167812 ↗