Exploring the Properties and Indications of Chairside CAD/CAM Materials in Restorative Dentistry
Source abstract
Abstract
The present review provides an up-to-date overview of chairside CAD/CAM materials used in restorative dentistry, focusing on their classification, properties, and clinical applications. If CAD/CAM technology was only an aspiration in the past, a higher proportion of clinics are employing it nowadays. The market is overflowing with biomaterials, and these materials are constantly evolving, making it challenging for practitioners to choose the most appropriate one, especially in correlation with patients’ medical diseases. The evolution of CAD/CAM technology has revolutionized dental practice, enabling the efficient fabrication of high-quality restorations in a single appointment. The main categories of chairside CAD/CAM materials include feldspathic ceramics, leucite-reinforced ceramics, lithium disilicate, zirconia, hybrid ceramics, and acrylic resins. The mechanical, physical, and aesthetic properties of these materials are discussed, along with their advantages and limitations for different clinical scenarios. Factors influencing material selection, such as strength, aesthetics, and ease of use, are also assessed. Ultimately, the guiding principle of dentistry is minimally invasive treatment following the particularity of the clinical case to obtain the envisioned result. Correlating all these factors, a simple, up-to-date classification is required to begin an individualized treatment. By synthesizing current evidence, this comprehensive review aims to guide clinicians in selecting appropriate chairside CAD/CAM materials to achieve optimal functional and aesthetic outcomes in restorative procedures. The integration of digital workflows and continued development of novel materials promise to further enhance the capabilities of chairside CAD/CAM systems in modern dental practice.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Dental Medicine, “Victor Babes” University of Medicine and Pharmacy, Revolutiei Ave. 1989, No. 9, 300580 Timișoara, Romania
TADERP Research Center—Advanced and Digital Techniques for Endodontic, Restorative and Prosthetic Treatment, “Victor Babeș” University of Medicine and Pharmacy, Revolutiei Ave. 1989, No. 9, 300041 Timişoara, Romania
Faculty of Dental Medicine, Vasile Goldiş Western University of Arad, 86 Liviu Rebreanu Street, 310414 Arad, Romania
References (100+)
Show source-provided references
1. The Current State of Chairside Digital Dentistry and Materials10.1016/j.cden.2018.11.002 ↗
2. An Overview of Dental CAD/CAM Systems10.1080/13102818.2008.10817506 ↗
3. Current Implementation of Digital Dentistry for Removable Prosthodontics in US Dental Schools10.1155/2022/7331185 ↗
4. A review of dental CAD/CAM: Current status and future perspectives from 20 years of experience10.4012/dmj.28.44 ↗
5. Designing a Single Lithium Disilicate Crown: A Computer-Aided Design and Computer-Aided Manufacturing Approach With Exocad Software
6. Rexhepi, I., Santilli, M., D’Addazio, G., Tafuri, G., Manciocchi, E., Caputi, S., and Sinjari, B. (2023). Clinical Applications and Mechanical Properties of CAD-CAM Materials in Restorative and Prosthetic Dentistry: A Systematic Review. J. Funct. Biomater., 14.10.20944/preprints202307.1226.v1 ↗
7. The use of CAD/CAM in dentistry10.1016/j.cden.2011.02.011 ↗
8. Panorama of dental CAD/CAM restorative systems
9. CAD/CAM in dental restorations: An overview10.5368/aedj.2010.2.3.123-128.pdf ↗
10. Mörmann, W.H.B.M. (2006). State of the art of CAD-CAM restorations: 20 years of CEREC. Quintessence Books, Quintessence Publishing Co Ltd.. [1st ed.].
11. Dentist material selection for single-unit crowns: Findings from the National Dental Practice-based research network10.1016/j.jdent.2016.09.010 ↗
12. Schlenz, M.A., Michel, K., Wegner, K., Schmidt, A., Rehmann, P., and Wöstmann, B. (2020). Undergraduate dental students’ perspective on the implementation of digital dentistry in the preclinical curriculum: A questionnaire survey. BMC Oral Health, 20.10.1186/s12903-020-01071-0 ↗
13. The science behind lithium disilicate: A metal-free alternative
14. Evolution Of CAD/CAM Materials In Prosthodontics: A Review
15. Zarone, F., Di Mauro, M.I., Ausiello, P., Ruggiero, G., and Sorrentino, R. (2019). Current status on lithium disilicate and zirconia: A narrative review. BMC Oral Health, 19.10.1186/s12903-019-0838-x ↗
16. Marchesi, G., Camurri Piloni, A., Nicolin, V., Turco, G., and Di Lenarda, R. (2021). Chairside CAD/CAM Materials: Current Trends of Clinical Uses. Biology, 10.10.3390/biology10111170 ↗
17. Shear bond strength of two composite resin cements to multiphase composite resin after different surface treatments and two glass-ceramics
18. A comparative evaluation of fracture resistance of tooth restoration complex restored with PEEK and lithium disilicate endo-crowns10.1111/jopr.13754 ↗
19. Cagidiaco, E.F., Grandini, S., Goracci, C., and Joda, T. (2019). A pilot trial on lithium disilicate partial crowns using a novel prosthodontic functional index for teeth (FIT). BMC Oral Health, 19.10.1186/s12903-019-0957-4 ↗
20. Color Stability of CAD/CAM Ceramics Prepared with Different Surface Finishing Procedures10.1111/jopr.13019 ↗
21. Spectrophotometer analysis of CAD-CAM zirconia reinforced lithium silicate and lithium disilicate glass ceramics10.21608/adjalexu.2019.63558 ↗
22. Color stability of fully- and pre-crystalized chair-side CAD-CAM lithium disilicate restorations after required and additional sintering processes10.4047/jap.2022.14.1.56 ↗
23. Lithium Disilicate Ceramics in Prosthodontics: Unveiling Innovations, Current Trends, and Future Horizons
24. Baus-Domínguez, M., Maza-Solano, S., Vázquez-Pachón, C., Flores-Cerero, M., Torres-Lagares, D., Serrera-Figallo, M.Á., and Macías-García, L. (2023). Behaviour of the Peri-Implant Soft Tissue with Different Rehabilitation Materials on Implants. Polymers, 15.10.3390/polym15153321 ↗
25. Assessment and selection of filler compounds for radiopaque PolyJet multi-material 3D printing for use in clinical settings10.1177/09544119221084819 ↗
26. Morphological and Chemical Analysis of Different Types of Calcium Silicate-Based Cements10.1155/2022/6480047 ↗
27. Silva, E.A., Simionato, A.A., Faria, A.C.L., Bonfante, E.A., Rodrigues, R.C.S., and Ribeiro, R.F. (2023). Mechanical Properties, Wear Resistance, and Reliability of Two CAD-CAM Resin Matrix Ceramics. Medicina, 59.10.3390/medicina59010128 ↗
28. Biaxial flexural strength and hardness of resin-matrix ceramic CAD/CAM materials10.13168/cs.2021.0030 ↗
29. Lin, J., Cai, P., Zhuo, Y., Lin, L., and Zheng, Z. (2023). Effect of abutment design on fracture resistance of resin-matrix ceramic crowns for dental implant restoration: An in vitro study. BMC Oral Health, 23.10.1186/s12903-023-03100-0 ↗
30. Muhammed, H.A., Mahmoud, E.M., Fahmy, A.E., and Nasr, D.M. (2023). The effect of sandblasting versus acid etching on the surface roughness and biaxial flexural strength of CAD/CAM resin-matrix ceramics (In vitro study). BMC Oral Health, 23.10.1186/s12903-023-02883-6 ↗
31. Clinical assessment of different implant-supported esthetic crown systems fabricated with semi-digital workflow: Two-year prospective study10.1111/jerd.12961 ↗
32. The effects of whitening mouth rinses on the color stability of CAD/CAM resin matrix ceramics10.36472/msd.v9i9.806 ↗
33. Surface modification of zirconia or lithium disilicate-reinforced glass ceramic by laser texturing to increase the adhesion of prosthetic surfaces to resin cements: An integrative review10.1007/s00784-023-05016-z ↗
34. Effect of different resin cements on shear bond strength between acrylic denture teeth and resin composite
35. Effect of Repair Material Type and Thermocycling Aging on Repair Bond Strength to Various Artificial Teeth10.7126/cumudj.1228510 ↗
36. Klaisiri, A., Maneenacarith, A., Krajangta, N., Sukkee, A., Hardy, N.S., Wutikhun, T., and Supachartwong, C. (2023). Surface Modification Methods of Self-Cured Acrylic Resin Repaired with Resin Composite Using a Universal Adhesive. J. Compos. Sci., 7.10.3390/jcs7090360 ↗
37. The Effect of Surface Treatments on the Shear Bond Strength of Acrylic Resin Denture Base With Different Repair Acrylic Resin: An In Vitro Study10.4103/JPBS.JPBS_40_19 ↗
38. 3D Printing of Zirconia Nanoparticle/Boron Nitride Nanosheet Multidimensional Reinforced Acrylic Matrix Composites for Self-Lubricating Materials10.1021/acsanm.3c03265 ↗
39. Alshaikh, A.A., Khattar, A., Almindil, I.A., Alsaif, M.H., Akhtar, S., Khan, S.Q., and Gad, M.M. (2022). 3D-Printed Nanocomposite Denture-Base Resins: Effect of ZrO2 Nanoparticles on the Mechanical and Surface Properties In Vitro. Nanomaterials, 12.10.3390/nano12142451 ↗
40. The impact of soaking heat-cured acrylic resin’s surface roughness in turmeric tamarind solution10.53022/oarjst.2024.10.1.0023 ↗
41. Immersion of heat polymerized acrylic resin dental base in arak bali against surface roughness10.46862/interdental.v17i1.2140 ↗
42. Effect of simulated brushing on surface roughness and wear of bis-acryl-based materials submitted to different polishing protocols10.4317/jced.58920 ↗
43. Contemporary Evidence of CAD-CAM in Dentistry: A Systematic Review
44. The Fourth Industrial Revolution`s impact on dentistry10.2298/SARH210130037S ↗
45. CAD/CAM—Historical Aspects, Processing and Various Systems: A Literature Review10.47310/iarjms.2022.v03i01.001 ↗
46. CAD/CAM systems available for the fabrication of crown and bridge restorations10.1111/j.1834-7819.2010.01300.x ↗
47. Awareness, attitude and knowledge of computer-aided design/computer-aided manufacturing (CAD/CAM) among dental professionals10.22271/oral.2022.v8.i1f.1452 ↗
48. The Application, Accuracy, and Utilization of Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) Systems in Restorative Dentistry
49. Developments in cad/cam technology: Possibilities for dental application
50. Survey of UK dentists regarding the use of CAD/CAM technology10.1038/sj.bdj.2016.862 ↗
51. Lee, J.D., Jung, S., Wang, C.W., and Lee, S.J. (2019). Integrated Digital and Conventional Treatment Workflow in Guided Complete Mouth Implant Rehabilitation: A Clinical Case Report. Dent. J., 7.10.3390/dj7040100 ↗
52. Flexural Strength of Composite Based Provisional Crown Materials10.23958/ijirms/vol06-i01/1055 ↗
53. Successful development and implementation of a digital dentistry curriculum at a US dental school10.2334/josnusd.21-0070 ↗
54. The Implementation of CAD/CAM Technology at Schools of Dentistry: A Short Communication10.12944/EDJ.05.01.03 ↗
55. Survey of Indian Dental Professionals Regarding the Use of Computer-Aided Design/Computer-Aided Manufacture (CAD/CAM) Technology
56. Nassani, M.Z., Ibraheem, S., Shamsy, E., Darwish, M., Faden, A., and Kujan, O. (2021). A Survey of Dentists’ Perception of Chair-Side CAD/CAM Technology. Healthcare, 9.10.3390/healthcare9010068 ↗
57. Step-by-Step Esthetic Rehabilitation with Chairside System
58. Park, J.S., Lim, Y.J., Kim, B., Kim, M.J., and Kwon, H.B. (2020). Clinical Evaluation of Time Efficiency and Fit Accuracy of Lithium Disilicate Single Crowns between Conventional and Digital Impression. Materials, 13.10.3390/ma13235467 ↗
59. De Angelis, P., Manicone, P.F., De Angelis, S., Grippaudo, C., Gasparini, G., Liguori, M.G., Camodeca, F., Piccirillo, G.B., Desantis, V., and D’Amato, G. (2020). Patient and Operator Centered Outcomes in Implant Dentistry: Comparison between Fully Digital and Conventional Workflow for Single Crown and Three-Unit Fixed-Bridge. Materials, 13.10.3390/ma13122781 ↗
60. Dauti, R., Cvikl, B., Franz, A., Schwarze, U.Y., Lilaj, B., Rybaczek, T., and Moritz, A. (2016). Comparison of marginal fit of cemented zirconia copings manufactured after digital impression with lava™ C.O.S and conventional impression technique. BMC Oral Health, 16.10.1186/s12903-016-0323-8 ↗
61. Clinical relevance of digital dentistry during COVID-19 outbreak10.20396/bjos.v19i00.8660201 ↗
62. Gianfreda, F., Pesce, P., Marcano, E., Pistilli, V., Bollero, P., and Canullo, L. (2022). Clinical Outcome of Fully Digital Workflow for Single-Implant-Supported Crowns: A Retrospective Clinical Study. Dent. J., 10.10.3390/dj10080139 ↗
63. Zotti, F., Marchesini, F., Lanzaretti, G., Bottonelli, J., Cominziolli, A., and Malchiodi, L. (2023). Traditional, 2D and 3D Workflows: What Is Better for Aesthetic Rehabilitation of Superior Anterior Teeth?. Appl. Sci., 13.10.3390/app13106205 ↗
64. Digital Workflow for Immediate Implant Placement and Chairside Provisionalization in the Esthetic Zone
65. Cervino, G., Fiorillo, L., Arzukanyan, A.V., Spagnuolo, G., and Cicciù, M. (2019). Dental Restorative Digital Workflow: Digital Smile Design from Aesthetic to Function. Dent. J., 7.10.3390/dj7020030 ↗
66. Computer-assisted technologies used in oral rehabilitation and the clinical documentation of alleged advantages—A systematic review10.1111/joor.12483 ↗
67. Conservative Anterior Partial Coverage CAD/CAM Restoration10.2341/16-117-S ↗
68. Perks of intraoral scanner to prosthodontist: A review10.18231/j.jdp.2023.024 ↗
69. Mangano, F., Gandolfi, A., Luongo, G., and Logozzo, S. (2017). Intraoral scanners in dentistry: A review of the current literature. BMC Oral Health, 17.10.1186/s12903-017-0442-x ↗
70. Chiu, A., Chen, Y., Hayashi, J., and Sadr, A. (2020). Accuracy of CAD/CAM digital impressions with different intraoral scanner parameters. Sensors, 20.10.3390/s20041157 ↗
71. Specific features of current intraoral scanners: A literature review10.22271/oral.2023.v9.i4c.1863 ↗
72. Awareness of intraoral scanners and knowledge of the effects of different lights on the accuracy of intraoral scanners among dental students and practitioners10.21786/bbrc/13.7/16 ↗
73. Accuracy of an intraoral digital impression: A review10.18231/j.aprd.2019.013 ↗
74. The role of intraoral scanners in the shade matching process: A systematic review10.1111/jopr.13576 ↗
75. In vitro comparative analysis of scanning accuracy of intraoral and laboratory scanners in measuring the distance between multiple implants10.1186/s40729-022-00416-4 ↗
76. Winkler, J., and Gkantidis, N. (2020). Trueness and precision of intraoral scanners in the maxillary dental arch: An in vivo analysis. Sci. Rep., 10.10.1038/s41598-020-58075-7 ↗
77. Evaluating the accuracy of three intraoral scanners using models containing different numbers of crown-prepared abutments10.1016/j.jds.2021.04.017 ↗
78. Text mining analysis of scientific literature on digital intraoral scanners in dentistry: Bibliometric analysis10.1177/20552076241260837 ↗
79. A Step-by-Step Conservative Approach for CAD-CAM Laminate Veneers
80. Chairside Fabrication of an All-Ceramic Partial Crown Using a Zirconia-Reinforced Lithium Silicate Ceramic
81. Customized zirconia crown in pediatric dentistry from concept to reality10.34172/ajdr.2023.1589 ↗
82. Clinical aspects of digital three-dimensional intraoral scanning in orthodontics—A systematic review10.1016/j.sdentj.2023.04.004 ↗
83. Influence of Operator Experience on Scanning Time and Accuracy with Two Different Intraoral Scanners—A Prospective Clinical Trial10.4274/TurkJOrthod.2022.2021.0220 ↗
84. Fracture Resistance of CAD/CAM Versus Traditional Interim Fixed Dental Prostheses10.37358/MP.18.3.5030 ↗
85. Mechanical and surface properties of additive manufactured zirconia under the different building directions10.2186/jpr.JPR_D_22_00166 ↗
86. Digitally Designed and Milled Verification Jigs Generated from Photogrammetry Data Acquisition: A Clinical Report10.1111/jopr.13409 ↗
87. Kang, S.Y., Yu, J.M., Lee, J.S., Park, K.S., and Lee, S.Y. (2020). Evaluation of the Milling Accuracy of Zirconia-Reinforced Lithium Silicate Crowns Fabricated Using the Dental Medical Device System: A Three-Dimensional Analysis. Materials, 13.10.3390/ma13204680 ↗
88. A Comparison of the Flexural and Impact Strengths and Flexural Modulus of CAD/CAM and Conventional Heat-Cured Polymethyl Methacrylate (PMMA)10.1111/jopr.12926 ↗
89. Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses10.2186/jpr.JPR_D_23_00089 ↗
90. Lebon, N., Tapie, L., and Vennat, E. (2020). Influence of Milling Tool and Prosthetic Materials on Roughness of the Dental CAD-CAM Prostheses in End Milling Mode. Appl. Sci., 10.10.3390/app10072238 ↗
91. Tzotzis, A., García-Hernández, C., Huertas-Talón, J.-L., and Kyratsis, P. (2020). CAD-Based Automated Design of FEA-Ready Cutting Tools. J. Manuf. Mater. Process., 4.10.3390/jmmp4040104 ↗
92. Cortes, A.R.G. (2022). Digital versus Conventional Workflow in Oral Rehabilitations: Current Status. Appl. Sci., 12.10.3390/app12083710 ↗
93. Tissue Surface Adaptation and Clinical Performance of CAD-CAM Milled versus Conventional Implant-Assisted Mandibular Overdenture
94. In vitro assessment of polishing efficiency for additive-manufactured Co-Cr alloy clasps10.2186/jpr.JPR_D_23_00258 ↗
95. Study on the use of digital technology in the realization of prosthetic restorations10.37358/MP.23.1.5648 ↗
96. Mechanical properties of 3D printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies10.1016/j.prosdent.2022.06.008 ↗
97. Cuschieri, L.A., Casha, A., No-Cortes, J., Ferreira Lima, J., and Cortes, A.R.G. (2023). Patient Satisfaction with Anterior Interim CAD-CAM Rehabilitations Designed by CAD Technician versus Trained Dentist—A Clinical Preliminary Study. Appl. Sci., 13.10.3390/app13148243 ↗
98. Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic posterior fixed partial dentures. Part II: Time efficiency of CAD-CAM versus conventional laboratory procedures10.1016/j.prosdent.2018.05.014 ↗
99. Patient satisfaction with conventional dentures vs. digital dentures fabricated using 3D-printing: A randomized crossover trial10.2186/jpr.JPR_D_21_00048 ↗
100. Assessment of the readiness of restorations manufactured by CAD/CAM in terms of marginal fit (Part I)10.7717/peerj.13280 ↗