Effects of Different Titanium Surface Treatments on Adhesion, Proliferation and Differentiation of Bone Cells: An In Vitro Study
Source abstract
Abstract
The objective of this study was to evaluate the impacts of different sandblasting procedures in acid etching of Ti6Al4V surfaces on osteoblast cell behavior, regarding various physicochemical and topographical parameters. Furthermore, differences in osteoblast cell behavior between cpTi and Ti6Al4V SA surfaces were evaluated. Sandblasting and subsequent acid etching of cpTi and Ti6Al4V discs was performed with Al2O3 grains of different sizes and with varying blasting pressures. The micro- and nano-roughness of the experimental SA surfaces were analyzed via confocal, atomic force and scanning electron microscopy. Surface free energy and friction coefficients were determined. hFOB 1.19 cells were seeded to evaluate adhesion, proliferation and osteoblastic differentiation for up to 12 d via crystal violet assays, MTT assays, ALP activity assays and Alizarin Red staining assays. Differences in blasting procedures had significant impacts on surface macro- and micro-topography. The crystal violet assay revealed a significant inverse relationship between blasting grain size and hFOB cell growth after 7 days. This trend was also visible in the Alizarin Red assays staining after 12 d: there was significantly higher biomineralization visible in the group that was sandblasted with smaller grains (F180) when compared to standard-grain-size groups (F70). SA samples treated with reduced blasting pressure exhibited lower hFOB adhesion and growth capabilities at initial (2 h) and later time points for up to 7 days, when compared to the standard SA surface, even though micro-roughness and other relevant surface parameters were similar. Overall, etched-only surfaces consistently exhibited equivalent or higher adhesion, proliferation and differentiation capabilities when compared to all other sandblasted and etched surfaces. No differences were found between cpTi and Ti6Al4V SA surfaces. Subtle modifications in the blasting protocol for Ti6Al4V SA surfaces significantly affect the proliferative and differentiation behavior of human osteoblasts. Surface roughness parameters are not sufficient to predict osteoblast behavior on etched Ti6Al4V surfaces.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthodontics, Preclinical Education and Dental Materials Science, Medical Faculty, University of Bonn, 53111 Bonn, Germany
Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, 3012 Bern, Switzerland
Department of Periodontology, Operative and Preventive Dentistry, Medical Faculty, University of Bonn, 53111 Bonn, Germany
Funding
Open Access Publication Fund of the University of Bonn
References (72)
Show source-provided references
1. Osseointegrated titanium implants: Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man10.3109/17453678108991776 ↗
2. Biological factors contributing to failures of osseointegrated oral implants, (I). Success criteria and epidemiology10.1046/j.0909-8836..t01-2-.x ↗
3. Osseointegration: Hierarchical designing encompassing the macrometer, micrometer, and nanometer length scales10.1016/j.dental.2014.10.007 ↗
4. Correlation between the Bone Density Recorded by a Computerized Implant Motor and by a Histomorphometric Analysis: A Preliminary In Vitro Study on Bovine Ribs10.1111/cid.12121 ↗
5. Advances in dental implant materials and tissue regeneration10.1111/j.1600-0757.2006.00175.x ↗
6. Small-diameter titanium Grade IV and titanium-zirconium implants in edentulous mandibles: Three-year results from a double-blind, randomized controlled trial10.1111/clr.12367 ↗
7. Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants10.1016/j.dental.2014.10.002 ↗
8. Microstructure, mechanical properties, castability and in vitro biocompatibility of Ti–Bi alloys developed for dental applications10.1016/j.actbio.2015.01.009 ↗
9. Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants?10.1016/j.msec.2016.10.025 ↗
10. Evaluation of a new titanium-zirconium dental implant: A biomechanical and histological comparative study in the mini pig10.1111/j.1708-8208.2010.00289.x ↗
11. A double-blind randomized controlled trial (rct) of titanium-13zirconium versus titanium grade iv small-diameter bone level implants in edentulous mandibles—Results from a 1-year observation period10.1111/j.1708-8208.2010.00324.x ↗
12. Nanostructured titanium-based materials for medical implants: Modeling and development10.1016/j.mser.2014.04.002 ↗
13. Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V10.1016/S0142-9612(97)00235-4 ↗
14. Systemic metal ion levels in dental implant patients
15. Mechanical and clinical properties of titanium and titanium-based alloys (Ti G2, Ti G4 cold worked nanostructured and Ti G5) for biomedical applications10.1016/j.jmrt.2018.07.016 ↗
16. Improved biocompatibility of titanium–zirconium (Ti–Zr) alloy: Tissue reaction and sensitization to Ti–Zr alloy compared with pure Ti and Zr in rat implantation study10.2320/matertrans.46.2260 ↗
17. Implants in bone: Part, I. A current overview about tissue response, surface modifications and future perspectives10.1007/s10006-013-0398-1 ↗
18. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗
19. Effect of modifications of dual acid-etched implant surfaces on peri-implant boneformation. Part I: Organic coatings10.1111/j.1600-0501.2008.01603.x ↗
20. Influence of implant surfaces on osseointegration10.1590/S0103-64402010000600001 ↗
21. Anodizing color coded anodized Ti6Al4V medical devices for increasing bone cell functions10.2147/IJN.S36203 ↗
22. Surface Modifications and Their Effects on Titanium Dental Implants10.1155/2015/791725 ↗
23. Osteoblastic cell behaviour on different titanium implant surfaces10.1016/j.actbio.2007.12.002 ↗
24. Oral implant surfaces: Part 1—Review focusing on topographic and chemical properties of different surfaces and in vivo responses to them
25. A Comparison of Endosseous Dental Implant Surfaces10.1902/jop.1999.70.12.1523 ↗
26. Influence of acid treatment on surface properties and in vivo performance of Ti6Al4V alloy for biomedical applications10.1007/s10856-017-5977-5 ↗
27. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
28. Classification of osseointegrated implant surfaces: Materials, chemistry and topography10.1016/j.tibtech.2009.12.003 ↗
29. Roughness induced dynamic changes of wettability of acid etched titanium implant modifications10.1016/j.biomaterials.2003.08.015 ↗
30. Human β-defensins differently affect proliferation, differentiation, and mineralization of osteoblast-like MG63 cells10.1002/jcp.22808 ↗
31. Effect of intermittent loading and surface roughness on peri-implant bone formation in a bone chamber model10.1111/j.1600-051X.2007.01135.x ↗
32. Effect of micro-roughness produced by TiO2 blasting—Tensile testing of bone attachment by using coin-shaped implants10.1016/S0142-9612(02)00167-9 ↗
33. Yeo, I.-S.L. (2019). Modifications of Dental Implant Surfaces at the Micro- and Nano-Level for Enhanced Osseointegration. Materials, 13.10.3390/ma13010089 ↗
34. Kligman, S., Ren, Z., Chung, C.-H., Perillo, M.A., Chang, Y.-C., Koo, H., Zheng, Z., and Li, C. (2021). The Impact of Dental Implant Surface Modifications on Osseointegration and Biofilm Formation. J. Clin. Med., 10.10.3390/jcm10081641 ↗
35. Surface characteristics of dental implants: A review10.1016/j.dental.2017.09.007 ↗
36. Comparative evaluation of topographical data of dental implant surfaces applying optical interferometry and scanning electron microscopy10.1016/j.dental.2017.04.020 ↗
37. High surface energy enhances cell response to titanium substrate microstructure10.1002/jbm.a.30320 ↗
38. Requirement for both micron- and submicron scale structure for synergistic responses of osteoblasts to substrate surface energy and topography10.1016/j.biomaterials.2007.02.024 ↗
39. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs10.1002/jbm.820250708 ↗
40. The Role of Implant Surface Characteristics in the Healing of Bone10.1177/10454411960070040301 ↗
41. Biomechanical comparison of the sandblasted and acid-etched and the machined and acid-etched titanium surface for dental implants10.1002/jbm.10063 ↗
42. Effects of implant surface coatings and composition on bone integration: A systematic review10.1111/j.1600-0501.2009.01777.x ↗
43. What is the best micro and macro dental implant topography?10.1016/j.cden.2019.02.010 ↗
44. Biological properties of acid etched titanium implants: Effect of sandblasting on bone anchorage10.1002/jbm.b.20003 ↗
45. A systematic review of the influence of different titanium surfaces on proliferation, differentiation and protein synthesis of osteoblast-like MG63 cells10.1111/j.1600-0501.2004.01054.x ↗
46. Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63)10.1002/jbm.820290314 ↗
47. Microrough titanium surface affects biologic response in MG63 osteoblast-like cells10.1002/jbm.a.31040 ↗
48. Proliferation, behavior, and differentiation of osteoblasts on surfaces of different microroughness10.1016/j.dental.2016.08.217 ↗
49. Response of normal female human osteoblasts (NHOst) to 17β-estradiol is modulated by implant surface morphology10.1002/jbm.10290 ↗
50. Qualitative and quantitative study of human osteoblast adhesion on materials with various surface roughnesses10.1002/(SICI)1097-4636(200002)49:2<155::AID-JBM2>3.0.CO;2-J ↗
51. Mechanisms regulating increased production of osteoprotegerin by osteoblasts cultured on microstructured titanium surfaces10.1016/j.biomaterials.2009.03.047 ↗
52. Shear force modulates osteoblast response to surface roughness10.1002/jbm.10037 ↗
53. Effect of surface topography and chemistry on adhesion, orientation and growth of fibroblasts on nickel–titanium substrates10.1016/S0928-4931(02)00097-8 ↗
54. In vitro MC3T3 osteoblast adhesion with respect to surface roughness of Ti6Al4V substrates10.1016/S1389-0344(02)00024-2 ↗
55. Effect of cpTi surface roughness on human bone marrow cell attachment, proliferation, and differentiation10.1590/S0103-64402003000100003 ↗
56. Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion10.1016/j.colsurfa.2009.12.017 ↗
57. Differential response of Staphylococci and osteoblasts to varying titanium surface roughness10.1016/j.biomaterials.2010.10.001 ↗
58. Response of rat bone marrow cells to commercially pure titanium submitted to different surface treatments10.1016/S0300-5712(03)00027-7 ↗
59. Effect of microstructure of titanium surface on the behaviour of osteogenic cell line MC3T3-E110.1023/A:1008851115846 ↗
60. Physical characterization of different-roughness titanium surfaces, with and without hydroxyapatite coating, and their effect on human osteoblast-like cells10.1002/jbm.b.30313 ↗
61. The titanium surface texture effects adherence and growth of human gingival keratinocytes and human maxillar osteoblast-like cells in vitro10.1016/S0142-9612(01)00024-2 ↗
62. The role of surface implant treatments on the biological behavior of SaOS-2 osteoblast-like cells. An in vitro comparative study10.1111/j.1600-0501.2011.02397.x ↗
63. Effect of titanium surface roughness on chondrocyte proliferation, matrix production, and differentiation depends on the state of cell maturation10.1002/(SICI)1097-4636(199602)30:2<145::AID-JBM3>3.0.CO;2-R ↗
64. Activation of phospholipase D1 by surface roughness of titanium in MG63 osteoblast-like cell10.1016/j.biomaterials.2006.06.023 ↗
65. Osteoblastic cell behaviour on modified titanium surfaces10.1016/j.micron.2017.11.010 ↗
66. Surface analysis of machined versus sandblasted and acid-etched titanium implants
67. In vitro and in vivo bio-compatibility of Ti-6Al-4V titanium alloy and UHMWPE polymer for total hip replacement10.7603/s40730-016-0014-8 ↗
68. Titanium alloys for dental implants: A review10.3390/prosthesis2020011 ↗
69. Role of materials surface topography on mammalian cell response10.1179/1743280411Y.0000000001 ↗
70. Effects of implant microtopography on osteoblast cell attachment10.1097/01.ID.0000058309.77613.87 ↗
71. The effect of limited lateral resolution in the measurement of implant surface roughness: A computer simulation10.1002/jbm.a.30455 ↗
72. The role of angiogenesis in implant dentistry part I: Review of titanium alloys, surface characteristics and treatments