Zn–Mn-Doped Mesoporous Bioactive Glass Nanoparticle-Loaded Zein Coatings for Bioactive and Antibacterial Orthopedic Implants
Source abstract
Abstract
In recent years, natural polymers have replaced synthetic polymers for antibacterial orthopedic applications owing to their excellent biocompatibility and biodegradability. Zein is a biopolymer found in corn. The lacking mechanical stability of zein is overcome by incorporating bioceramics, e.g., mesoporous bioactive glass nanoparticles (MBGNs). In the present study, pure zein and zein/Zn–Mn MBGN composite coatings were deposited via electrophoretic deposition (EPD) on 316L stainless steel (SS). Zn and Mn were co-doped in MBGNs in order to make use of their antibacterial and osteogenic potential, respectively. A Taguchi design of experiment (DoE) study was established to evaluate the effect of various working parameters on the morphology of the coatings. It was observed that coatings deposited at 20 V for 5 min with 4 g/L concentration (conc.) of Zn–Mn MBGNs showed the highest deposition yield. Uniform coatings with highly dispersed MBGNs were obtained adopting these optimized parameters. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) were employed to investigate the morphology and elemental composition of zein/Zn–Mn MBGN composite coatings. Surface properties, i.e., coating roughness and wettability analysis, concluded that composite coatings were appropriate for cell attachment and proliferation. For adhesion strength, various techniques, including a tape test, bend test, pencil hardness test, and tensile test, were performed. Wear and corrosion analysis highlighted the mechanical and chemical stability of the coatings. The colony forming unit (CFU) test showed that the zein/Zn–Mn MBGN composite coating was highly effective against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) due to the presence of Zn. The formation of a hydroxyapatite (HA)-like structure upon immersion in the simulated body fluid (SBF) validated the in vitro bioactivity of the coating. Moreover, a WST-8 assay depicted that the MG-63 cells proliferate on the composite coating. It was concluded that the zein/Zn–Mn MBGN coating synthesized in this work can be used for bioactive and antibacterial orthopedic applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Ferroelectric and Piezoelectric Materials · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Institute of Space Technology Islamabad, Islamabad 44000, Pakistan
School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST) H-12, Islamabad 44000, Pakistan
Funding
Innovative and Collaborative Research Grant Partnerships Grant under Pakistan UK Education Gateway (ICRG-2020)
References (74)
Show source-provided references
1. Fabrication and Characterization of Zein/Hydroxyapatite Composite Coatings for
2. Bone grafts and biomaterials substitutes for bone defect repair: A review
3. The corrosion scenario in human body: Stainless steel 316L orthopaedic implants
4. Eliaz, N. (2019). Corrosion of Metallic Biomaterials: A Review. Materials, 12.10.3390/ma12030407 ↗
5. Biosensitive and antibacterial coatings on metallic material for medical applications
6. Bio-responsive materials for tissue regeneration10.1088/2515-7639/ab6d3f ↗
7. Engineered biomaterials for in situ tissue regeneration10.1038/s41578-020-0209-x ↗
8. Switchable Dual-Function and Bioresponsive Materials to Control Bacterial Infections10.1021/acsami.9b05901 ↗
9. Bioactive Materials copper based coatings for implantable stainless steel aimed at bone healing
10. Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation10.1016/j.actbio.2019.11.024 ↗
11. Surface modification—A step forward to overcome the current challenges in orthopedic industry and to obtain an improved osseointegration and antimicrobial properties10.1016/j.matchemphys.2019.122579 ↗
12. Surface modification of orthopedic implants by optimized fluorine-substituted hydroxyapatite coating: Enhancing corrosion behavior and cell function10.1016/j.ceramint.2019.09.197 ↗
13. Bhaskar, B., Rao, P.S., Kasoju, N., Nagarjuna, V., and Baadhe, R.R. (2021). Trends in Functional Biomaterials in Tissue Engineering and Regenerative Medicine BT—Biomaterials in Tissue Engineering and Regenerative Medicine: From Basic Concepts to State of the Art Approaches, Springer.10.1007/978-981-16-0002-9 ↗
14. Zein: The industrial protein from corn10.1016/S0926-6690(00)00064-9 ↗
15. Preparation and Characterization of Zein and Zein-Chitosan Microspheres with Great Prospective of Application in Controlled Drug Release
16. Zein in controlled drug delivery and tissue engineering10.1016/j.jconrel.2014.06.036 ↗
17. Manuka Honey and Zein Coatings Impart Bioactive Glass Bone Tissue Scaffolds Antibacterial Properties and Superior Mechanical Properties
18. Batool, S.A., Wadood, A., Hussain, S.W., Yasir, M., and Rehman, M.A.U. (2021). A Brief Insight to the Electrophoretic Deposition of PEEK-, Chitosan-, Gelatin-, and Zein-Based Composite Coatings for Biomedical Applications: Recent Developments and Challenges. Surfaces, 4.10.3390/surfaces4030018 ↗
19. Formation of Zein/Bioactive Glass Layers Using Electrophoretic Deposition Technique10.1149/08201.0073ecst ↗
20. Improvement in the surface properties of stainless steel via zein/hydroxyapatite composite coatings for biomedical applications10.1016/j.surfin.2020.100589 ↗
21. Zein/Bioactive Glass Coatings with Controlled Degradation of Magnesium under Physiological Conditions: Designed for Orthopedic Implants10.3390/prosthesis2030018 ↗
22. A functional apatite with antibacterial efficacy for bone tissue infections10.1088/2515-7639/ab1207 ↗
23. Antibacterial and Bioactive Coatings Based on Radio Frequency Co-Sputtering of Silver Nanocluster-Silica Coatings on PEEK/Bioactive Glass Layers Obtained by Electrophoretic Deposition10.1021/acsami.7b08646 ↗
24. Ag-Mn doped mesoporous bioactive glass nanoparticles in corporated into the chitosan/gelatin coatings deposited on PEEK/bioactive glass layers for favorable osteogenic differentiation and antibacterial activity Materials Advances10.1039/D0MA00325E ↗
25. Fabrication and characterization of Ag-Sr-substituted hydroxyapatite/chitosan coatings deposited via electrophoretic deposition: A design of experiment study10.1021/acsomega.0c02582 ↗
26. Antibacterial efficacy and cytotoxicity studies of copper (II) and titanium (IV) substituted hydroxyapatite nanoparticles10.1016/j.msec.2010.06.011 ↗
27. Development of bioactive composite coatings based on combination of PEEK, bioactive glass and Ag nanoparticles with antibacterial properties10.1016/j.surfcoat.2016.03.057 ↗
28. Boccaccini, A.R., Keim, S., Ma, R., Li, Y., and Zhitomirsky, I. (2010). Electrophoretic deposition of biomaterials. J. R. Soc. Interface, 7.10.1098/rsif.2010.0156.focus ↗
29. EPD kinetics: A review10.1016/j.jeurceramsoc.2009.08.022 ↗
30. Maci, F., Moskalewicz, T., Kowalski, K., Łukaszczyk, A., Hadzhieva, Z., and Boccaccini, A.R. (2021). The Effect of Electrophoretic Deposition Parameters on the Microstructure and Adhesion of Zein Coatings to Titanium Substrates. Materials, 14.10.3390/ma14020312 ↗
31. Best marketing strategy selection using fractional factorial design with analytic hierarchy process10.1016/j.mex.2020.100927 ↗
32. Moreno-Piraján, J.C., Giraldo-Gutierrez, L., and Gómez-Granados, F. (2021). Recent Developments in the Electrophoretic Deposition of Carbon Nanomaterials BT—Porous Materials: Theory and Its Application for Environmental Remediation, Springer International Publishing.10.1007/978-3-030-65991-2 ↗
33. Electrophoretic deposition of chitosan/gelatin/bioactive glass composite coatings on 316L stainless steel: A design of experiment study10.1016/j.surfcoat.2018.12.013 ↗
34. Electrophoretic deposition of PEEK/bioactive glass composite coatings for orthopedic implants: A design of experiments (DoE) study10.1016/j.matdes.2017.05.045 ↗
35. Electrophoretic deposition of zein coatings10.1007/s11998-016-9885-2 ↗
36. Surface modification of stainless steel for biomedical applications: Revisiting a century-old material10.1016/j.msec.2018.08.049 ↗
37. Antibacterial metals and alloys for potential biomedical implants
38. Boron-containing bioactive glasses in bone and soft tissue engineering10.1016/j.jeurceramsoc.2017.11.001 ↗
39. Westhauser, F., Kaya, S., and Boccaccini, A.R. (2021). Impact of Zinc- or Copper-Doped Mesoporous Bioactive Glass Nanoparticles on the Osteogenic Differentiation and Matrix Formation of Mesenchymal Stromal Cells. Materials, 14.10.3390/ma14081864 ↗
40. Extension of the Stöber Method to Construct Mesoporous SiO2 and TiO2 Shells for Uniform Multifunctional Core–Shell Structures10.1002/adma.201203547 ↗
41. Bano, S., Nawaz, Q., and Bastan, F.E. (2021). Synthesis and characterization of silver-strontium (Ag-Sr)-doped mesoporous bioactive glass nanoparticles. Gels, 7.10.20944/preprints202102.0245.v1 ↗
42. Fabrication and characterization of electrophoretically deposited chitosan-hydroxyapatite composite coatings on anodic titanium dioxide layers10.1016/j.electacta.2019.03.195 ↗
43. Bioactive glass combined with zein as composite material for the application in bone tissue engineering10.1515/bglass-2018-0007 ↗
44. (2017). Standard Test Methods for Rating Adhesion by Tape Test (Standard No. ASTM D3359-17).
45. (2017). Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers (Standard No. ASTM D4541-17).
46. ISO (2022, July 13). 4624:2016 and Adhesion. Paints and Varnishes—Pull-Off Test for Adhesion. Available online: https://www.iso.org/standard/62351.html.
47. (2020). Standard Test Method for Film Hardness by Pencil Test (Standard No. ASTM D3363-20).
48. (2008). Standard Practice for Qualitative Adhesion Testing of Metallic Coatings (Standard No. ASTM B571-97(2008)e1).
49. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
50. Ag–Sr doped mesoporous bioactive glass nanoparticles loaded chitosan/gelatin coating for orthopedic implants10.1111/ijac.13702 ↗
51. Multifunctional zinc ion doped sol–gel derived mesoporous bioactive glass nanoparticles for biomedical applications
52. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
53. Stability analysis of Al2O3/water nanofluids10.1080/17458080.2017.1285445 ↗
54. Controlled Release from Zein Matrices: Interplay of Drug Hydrophobicity and pH10.1007/s11095-015-1818-8 ↗
55. Electrophoretic deposition of chitosan/45S5 Bioglass® composite coatings for orthopaedic applications10.1016/j.surfcoat.2011.05.026 ↗
56. Electrophoretic deposition of polymers and proteins for biomedical applications10.1016/j.cis.2020.102272 ↗
57. Meyer, N., Rivera, L.R., Ellis, T., Qi, J., Ryan, M.P., and Boccaccini, A.R. (2018). Bioactive and Antibacterial Coatings Based on Zein/Bioactive Glass Composites by Electrophoretic Deposition. Coatings, 8.10.3390/coatings8010027 ↗
58. Electrophoretic deposition (EPD): Mechanisms, kinetics, and application to ceramics10.1111/j.1151-2916.1996.tb08929.x ↗
59. Aguilar-Rabiela, A.E., Leal-Egaña, A., Nawaz, Q., and Boccaccini, A.R. (2021). Integration of mesoporous bioactive glass nanoparticles and curcumin into PHBV microspheres as biocompatible composite for drug delivery applications. Molecules, 26.10.3390/molecules26113177 ↗
60. Effect of manganese, zinc, and copper on the biological and osteogenic properties of mesoporous bioactive glass nanoparticles10.1002/jbm.a.37136 ↗
61. Osteogenic properties of manganese-doped mesoporous bioactive glass nanoparticles10.1002/jbm.a.36945 ↗
62. Fabrication and characterization of zein/bioactive glass deposited on pretreated magnesium via electrophoretic deposition10.1002/ces2.10066 ↗
63. Zein/Cellulose Acetate Hybrid Nanofibers: Electrospinning and Characterization10.1007/s13233-014-2136-4 ↗
64. A study of the electrophoretic deposition of bioactive glass-chitosan composite coating10.1016/j.ceramint.2011.07.029 ↗
65. Cellular behaviour of bone marrow stromal cells on modified Ti-Nb surfaces10.1016/j.matdes.2017.12.006 ↗
66. Electrophoretic deposition of PEEK/bioactive glass composite coatings on stainless steel for orthopedic applications: An optimization for in vitro bioactivity and adhesion strength10.1007/s00170-020-05456-x ↗
67. Zein-Based Electrospun Fibers Containing Bioactive Glass with Antibacterial Capabilities10.1002/mabi.202000059 ↗
68. Recent advances in mechanical properties of biopolymer composites: A review10.1002/pc.25356 ↗
69. The reproducibility of corrosion testing in supercritical water—Results of a second international interlaboratory comparison exercise10.1016/j.jnucmat.2022.153759 ↗
70. A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics10.1016/j.biomaterials.2011.01.004 ↗
71. Bioactive calcium phosphate materials and applications in bone regeneration10.1186/s40824-018-0149-3 ↗
72. Role of calcium ions in defining the bioactivity of surface modified Ti metal10.1016/j.msec.2018.12.096 ↗
73. Electrophoretic deposition of tetracycline hydrochloride loaded halloysite nanotubes chitosan/bioactive glass composite coatings for orthopedic implants10.1016/j.surfcoat.2017.07.048 ↗
74. Development of sustainable antibacterial coatings based on electrophoretic deposition of multilayers: Gentamicin-loaded chitosan/gelatin/bioactive glass deposition on PEEK/bioactive glass layer10.1007/s00170-022-09024-3 ↗