journal article·2017-01-11Open access

Optimization of Polymer-ECM Composite Scaffolds for Tissue Engineering: Effect of Cells and Culture Conditions on Polymeric Nanofiber Mats

Ritu Goyal, Murat Guvendiren, Onyi Freeman, Yong Mao, Joachim Kohn

Abstract

The design of composite tissue scaffolds containing an extracellular matrix (ECM) and synthetic polymer fibers is a new approach to create bioactive scaffolds that can enhance cell function. Currently, studies investigating the effects of ECM-deposition and decellularization on polymer degradation are still lacking, as are data on optimizing the stability of the ECM-containing composite scaffolds during prolonged cell culture. In this study, we develop fibrous scaffolds using three polymer compositions, representing slow (E0000), medium (E0500), and fast (E1000) degrading materials, to investigate the stability, degradation, and mechanics of the scaffolds during ECM deposition and decellularization, and during the complete cellularization-decell-recell cycle. We report data on percent molecular weight (% Mw) retention of polymeric fiber mats, changes in scaffold stiffness, ECM deposition, and the presence of fibronectin after decellularization. We concluded that the fast degrading E1000 (Mw retention ≤ 50% after 28 days) was not sufficiently stable to allow scaffold handling after 28 days in culture, while the slow degradation of E0000 (Mw retention ≥ 80% in 28 days) did not allow deposited ECM to replace the polymer support. The scaffolds made from medium degrading E0500 (Mw retention about 60% at 28 days) allowed the gradual replacement of the polymer network with cell-derived ECM while maintaining the polymer network support. Thus, polymers with an intermediate rate of degradation, maintaining good scaffold handling properties after 28 days in culture, seem best suited for creating ECM-polymer composite scaffolds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

New Jersey Center for Biomaterials, Rutgers, The State University of New Jersey, 145 Bevier Road, Piscataway, NJ 08854, USA

Chemical, Biological and Pharmaceutical Engineering, New Jersey Institute of Technology, Tiernan Hall, University Heights, Newark, NJ 07102, USA

Funding

National Institutes of Health

References (49)

Show source-provided references
1. Growth factors, matrices, and forces combine and control stem cells10.1126/science.1171643 ↗
2. Engineering ecm signals into biomaterials10.1016/S1369-7021(12)70197-9 ↗
3. Electrospinning: A fascinating fiber fabrication technique10.1016/j.biotechadv.2010.01.004 ↗
4. Industrial upscaling of electrospinning and applications of polymer nanofibers: A review10.1002/mame.201200290 ↗
5. Cellular adhesiveness and extracellular substrata10.1016/S0074-7696(08)62241-X ↗
6. Quantitative analysis of cell adhesion on aligned micro- and nanofibers10.1002/jbm.a.31304 ↗
7. Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment10.1002/jbm.a.10098 ↗
8. Morphology, cytoskeletal organization, and myosin dynamics of mouse embryonic fibroblasts cultured on nanofibrillar surfaces10.1007/s11010-007-9417-6 ↗
9. Chondrocyte phenotype in engineered fibrous matrix is regulated by fiber size10.1089/ten.2006.12.1775 ↗
10. One-dimensional topography underlies three-dimensional fibrillar cell migration10.1083/jcb.200810041 ↗
11. Microfibrous substrate geometry as a critical trigger for organization, self-renewal, and differentiation of human embryonic stem cells within synthetic 3-dimensional microenvironments10.1096/fj.11-192732 ↗
12. Three dimensional nanofibrillar surfaces induce activation of RAC10.1016/j.bbrc.2005.03.195 ↗
13. Organizational metrics of interchromatin speckle factor domains: Integrative classifier for stem cell adhesion & lineage signaling10.1039/C4IB00281D ↗
14. The differentiation of embryonic stem cells seeded on electrospun nanofibers into neural lineages10.1016/j.biomaterials.2008.09.046 ↗
15. Engineering controllable anisotropy in electrospun biodegradable nanofibrous scaffolds for musculoskeletal tissue engineering10.1016/j.jbiomech.2006.09.004 ↗
16. Nanofibrous biologic laminates replicate the form and function of the annulus fibrosus10.1038/nmat2558 ↗
17. Issls prize winner: Integrating theoretical and experimental methods for functional tissue engineering of the annulus fibrosus10.1097/BRS.0b013e31818e61f7 ↗
18. In vivo applications of electrospun tissue-engineered vascular grafts: A review10.1089/ten.teb.2014.0123 ↗
19. Electrospun nanofiber scaffolds: Engineering soft tissues10.1088/1748-6041/3/3/034002 ↗
20. Electrospun nanofibrous polymeric scaffold with targeted drug release profiles for potential application as wound dressing10.1016/j.ijpharm.2008.07.033 ↗
21. Electrospinning for regenerative medicine: A review of the main topics10.1016/j.drudis.2014.03.024 ↗
22. Fibrous hyaluronic acid hydrogels that direct MSC chondrogenesis through mechanical and adhesive cues10.1016/j.biomaterials.2013.04.004 ↗
23. Hydrogel design for cartilage tissue engineering: A case study with hyaluronic acid10.1016/j.biomaterials.2011.08.073 ↗
24. Electrospun silk-BMP-2 scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.01.022 ↗
25. Electrospun nanostructured scaffolds for bone tissue engineering10.1016/j.actbio.2009.05.007 ↗
26. Progress of electrospun fibers as nerve conduits for neural tissue repair10.2217/nnm.14.70 ↗
27. Bioactive electrospun scaffolds delivering growth factors and genes for tissue engineering applications10.1007/s11095-010-0320-6 ↗
28. Ultrafast and fast bioerodible electrospun fiber mats for topical delivery of a hydrophilic peptide10.1016/j.jconrel.2012.04.035 ↗
29. Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery10.1016/j.addr.2009.07.007 ↗
30. Controlling stem cell fate with material design10.1002/adma.200901055 ↗
31. Hydrogels as extracellular matrix mimics for 3D cell culture10.1002/bit.22361 ↗
32. Engineering synthetic hydrogel microenvironments to instruct stem cells10.1016/j.copbio.2013.03.009 ↗
33. Effect of bone extracellular matrix synthesized in vitro on the osteoblastic differentiation of marrow stromal cells10.1016/j.biomaterials.2004.04.001 ↗
34. Cell-derived polymer/extracellular matrix composite scaffolds for cartilage regeneration, part 1: Investigation of cocultures and seeding densities for improved extracellular matrix deposition10.1089/ten.tec.2013.0286 ↗
35. Enhanced differentiation of human embryonic stem cells on extracellular matrix-containing osteomimetic scaffolds for bone tissue engineering10.1089/ten.tec.2013.0411 ↗
36. Scaffold/extracellular matrix hybrid constructs for bone-tissue engineering10.1002/adhm.201200209 ↗
37. A combinatorial approach for polymer design10.1021/ja970389z ↗
38. Structure-property correlations in a combinatorial library of degradable biomaterials10.1002/(SICI)1097-4636(199810)42:1<66::AID-JBM9>3.0.CO;2-M ↗
39. New approaches to biomaterials design10.1038/nmat1249 ↗
40. A new approach to the rationale discovery of polymeric biomaterials10.1016/j.biomaterials.2007.06.022 ↗
41. Polymers derived from the amino acid l-tyrosine: Polycarbonates, polyarylates and copolymers with poly(ethylene glycol)10.1016/S0169-409X(03)00038-3 ↗
42. Computational methods for the development of polymeric biomaterials10.1002/adem.200980020 ↗
43. Small changes in polymer chemistry have a large effect on the bone-implant interface: Evaluation of a series of degradable tyrosine-derived polycarbonates in bone defects10.1016/S0142-9612(99)00151-9 ↗
44. Hydrolytic degradation of tyrosine-derived polycarbonates, a class of new biomaterials. Part I: Study of model compounds10.1016/S0142-9612(00)00104-6 ↗
45. Ultrafast resorbing polymers for use as carriers for cortical neural probes10.1016/j.actbio.2011.02.027 ↗
46. Tangpasuthadol, V. (1999). Thermo-Mechanical Properties and Hydrolytic Degradation of Tyrosine-Derived Polymers for Use in Biomedical Applications, Rutgers University.
47. Abramson, S.D. (2002). Selected Bulk and Surface Properties and Biocompatibility of a New Class of Tyrosine-Derived Polycarbonates, Rutgers University.
48. Stimulatory effects of a three-dimensional microenvironment on cell-mediated fibronectin fibrillogenesis10.1242/jcs.02566 ↗
49. Synthesis, degradation and biocompatibility of tyrosine-derived polycarbonate scaffolds10.1039/c0jm00868k ↗