journal article·2023-10-16Open access

Selective Laser Melting and Spark Plasma Sintering: A Perspective on Functional Biomaterials

Ramin Rahmani, Sérgio Ivan Lopes, Konda Gokuldoss Prashanth

Journal of Functional Biomaterials· Volume 14· Issue 10

Abstract

Achieving lightweight, high-strength, and biocompatible composites is a crucial objective in the field of tissue engineering. Intricate porous metallic structures, such as lattices, scaffolds, or triply periodic minimal surfaces (TPMSs), created via the selective laser melting (SLM) technique, are utilized as load-bearing matrices for filled ceramics. The primary metal alloys in this category are titanium-based Ti6Al4V and iron-based 316L, which can have either a uniform cell or a gradient structure. Well-known ceramics used in biomaterial applications include titanium dioxide (TiO2), zirconium dioxide (ZrO2), aluminum oxide (Al2O3), hydroxyapatite (HA), wollastonite (W), and tricalcium phosphate (TCP). To fill the structures fabricated by SLM, an appropriate ceramic is employed through the spark plasma sintering (SPS) method, making them suitable for in vitro or in vivo applications following minor post-processing. The combined SLM-SPS approach offers advantages, such as rapid design and prototyping, as well as assured densification and consolidation, although challenges persist in terms of large-scale structure and molding design. The individual or combined application of SLM and SPS processes can be implemented based on the specific requirements for fabricated sample size, shape complexity, densification, and mass productivity. This flexibility is a notable advantage offered by the combined processes of SLM and SPS. The present article provides an overview of metal–ceramic composites produced through SLM-SPS techniques. Mg-W-HA demonstrates promise for load-bearing biomedical applications, while Cu-TiO2-Ag exhibits potential for virucidal activities. Moreover, a functionally graded lattice (FGL) structure, either in radial or longitudinal directions, offers enhanced advantages by allowing adjustability and control over porosity, roughness, strength, and material proportions within the composite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CiTin—Centro de Interface Tecnológico Industrial, 4970-786 Arcos de Valdevez, Portugal

proMetheus, Instituto Politécnico de Viana do Castelo (IPVC), 4900-347 Viana do Castelo, Portugal

ADiT-Lab, Instituto Politécnico de Viana do Castelo (IPVC), 4900-347 Viana do Castelo, Portugal

Department of Mechanical and Industrial Engineering, Tallinn University of Technology, 19086 Tallinn, Estonia

CBCMT, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 630014, Tamil Nadu, India

Funding

Missão Interface

References (100+)

Show source-provided references
1. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts10.1108/13552540710776142 ↗
2. Selective laser melted Ti6Al4V split-P TPMS lattices for bone tissue engineering10.1016/j.ijmecsci.2023.108353 ↗
3. Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering10.1089/ten.tec.2008.0288 ↗
4. Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility10.1016/j.colsurfb.2015.06.074 ↗
5. Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting10.1016/j.jmrt.2021.11.112 ↗
6. Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt–chromium alloy10.1016/j.surfcoat.2008.05.003 ↗
7. Production of Porous β-Type Ti-40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing10.3390/ma6125700 ↗
8. Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications10.1007/s11106-011-9329-6 ↗
9. Serrano-Aroca, Á. (2022). Antiviral Characterization of Advanced Materials: Use of Bacteriophage Phi 6 as Surrogate of Enveloped Viruses Such as SARS-CoV-2. Int. J. Mol. Sci., 23.10.3390/ijms23105335 ↗
10. Luo, J.P., Jia, X., Gu, R.N., Zhou, P., Huang, Y.J., Sun, J.F., and Yan, M. (2018). 316L Stainless Steel Manufactured by Selective Laser Melting and Its Biocompatibility with or without Hydroxyapatite Coating. Metals, 8.10.3390/met8070548 ↗
11. Al2O3-Ti functionally graded material prepared by spark plasma sintering for orthopaedic applications10.1016/j.jmbbm.2017.04.024 ↗
12. Spark plasma sintering as advanced PM sintering method10.1179/003258902225007041 ↗
13. Microstructures and mechanical properties of ZrB2-SiC-Ni ceramic composites prepared by spark plasma sintering10.1016/j.ceramint.2019.05.151 ↗
14. Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review10.1002/adem.201500419 ↗
15. Deformation behavior of metallic lattice structures with symmetrical gradients of porosity manufactured by metal additive manufacturing10.1016/j.vacuum.2023.111955 ↗
16. The Potential of Spark Plasma Sintering (SPS) Method for the Fabrication on an Industrial Scale of Functionally Graded Materials10.4028/www.scientific.net/AST.63.322 ↗
17. Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology10.1016/j.prosdent.2014.10.012 ↗
18. Baghi, A.D., Nafisi, S., Ebendorff-Heidepriem, H., and Ghomashchi, R. (2022). Microstructural Development of Ti-6Al-4V Alloy via Powder Metallurgy and Laser Powder Bed Fusion. Metals, 12.10.3390/met12091462 ↗
19. Comparative evaluation of thermal and mechanical properties of nickel alloy 718 prepared using selective laser melting, spark plasma sintering, and casting methods10.1016/j.jmrt.2021.03.043 ↗
20. Microstructures and mechanical properties of Si and Zr modified Al-Zn-Mg-Cu alloy—A comparison between selective laser melting and spark plasma sintering10.1016/j.jallcom.2019.153520 ↗
21. The Role of Additive Manufacturing in the Era of Industry 4.010.1016/j.promfg.2017.07.148 ↗
22. Additive Manufacturing Applications in Industry 4.0: A Review10.1142/S2424862219300011 ↗
23. Chekotu, J.C., Groarke, R., O’toole, K., and Brabazon, D. (2019). Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production. Materials, 12.10.3390/ma12050809 ↗
24. Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques10.1111/jopr.12268 ↗
25. Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties10.1016/j.jallcom.2015.11.141 ↗
26. The in vitro and in vivo biological effects and osteogenic activity of novel biodegradable porous Mg alloy scaffolds10.1016/j.matdes.2020.108514 ↗
27. Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior10.1016/j.ijplas.2021.102926 ↗
28. Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal Deposition10.1002/adem.201600635 ↗
29. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder10.1007/s00170-018-1891-3 ↗
30. Rahmani, R., Antonov, M., and Prashanth, K.G. (2021). The impact resistance of highly densified metal alloys manufactured from gas-atomized pre-alloyed powders. Coatings, 11.10.3390/coatings11020216 ↗
31. Direct selective laser sintering and melting of ceramics: A review10.1108/RPJ-11-2015-0178 ↗
32. Photocatalytic activity of spark plasma sintered TiO2–graphene nanoplatelet composite10.1016/j.scriptamat.2013.01.012 ↗
33. Ceramics for medical applications: A picture for the next 20 years10.1016/j.jeurceramsoc.2008.08.025 ↗
34. Application of carbonaceous template for porous structure control of ceramic composites based on synthetic wollastonite obtained via Spark Plasma Sintering10.1016/j.ceramint.2014.09.045 ↗
35. Near-zero-shrinkage Al2O3 ceramic foams with coral-like and hollow-sphere structures via selective laser sintering and reaction bonding10.1016/j.jeurceramsoc.2021.09.023 ↗
36. Additive manufacturing of zirconia parts by indirect selective laser sintering10.1016/j.jeurceramsoc.2013.07.023 ↗
37. Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications10.1016/j.ijbiomac.2022.07.140 ↗
38. Khalid, M.Y., Arif, Z.U., Noroozi, R., Hossain, M., Ramakrishna, S., and Umer, R. (2023). 3D/4D printing of cellulose nanocrystals-based biomaterials: Additives for sustainable applications. Int. J. Biol. Macromol., 251.10.1016/j.ijbiomac.2023.126287 ↗
39. In vivo biocompatibility evaluation of 3D-printed nickel–titanium fabricated by selective laser melting10.1007/s10856-022-06641-y ↗
40. Antibacterial activities and biocompatibilities of Ti-Ag alloys prepared by spark plasma sintering and acid etching10.1016/j.msec.2018.06.024 ↗
41. Yttrium for the selective laser melting of Ti-45Al-8Nb intermetallic: Powder surface structure, laser absorptivity, and printability10.1016/j.jallcom.2021.161970 ↗
42. Selective laser melting enabled additive manufacturing of Ti-22Al-25Nb intermetallic: Excellent combination of strength and ductility, and unique microstructural features associated10.1016/j.actamat.2019.05.008 ↗
43. Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments10.1016/j.jallcom.2016.02.183 ↗
44. Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V10.1007/s00170-019-04002-8 ↗
45. Effects of scanning speed on in vitro biocompatibility of 316L stainless steel parts elaborated by selective laser melting10.1007/s00170-017-0525-5 ↗
46. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting10.1016/j.matdes.2018.04.058 ↗
47. Konieczny, B., Szczesio-Wlodarczyk, A., Sokolowski, J., and Bociong, K. (2020). Challenges of Co-Cr Alloy Additive Manufacturing Methods in Dentistry—The Current State of Knowledge (Systematic Review). Materials, 13.10.3390/ma13163524 ↗
48. Manakari, V., Parande, G., and Gupta, M. (2017). Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review. Metals, 7.10.3390/met7010002 ↗
49. Research progress on selective laser melting (SLM) of magnesium alloys: A review10.1016/j.ijleo.2019.163842 ↗
50. Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi10.1039/b715313a ↗
51. Selective laser sintering in biomedical engineering10.1007/s11517-012-1001-x ↗
52. Direct Selective Laser Melting of Nitinol Powder10.1016/j.phpro.2012.10.060 ↗
53. Dar, G.I., Saeed, M., and Wu, A. (2020). Toxicity of TiO2 Nanoparticles, Wiley Online. Chapter 2.
54. Toxicity of TiO2 nanoparticles to cladocerans, algae, rotifers and plants—Effects of size and crystalline structure10.1016/j.chemosphere.2012.09.013 ↗
55. Pulmonary Instillation Studies with Nanoscale TiO2 Rods and Dots in Rats: Toxicity Is not Dependent upon Particle Size and Surface Area10.1093/toxsci/kfj140 ↗
56. Nanotoxicity of TiO2 nanoparticles to erythrocyte in vitro10.1016/j.fct.2008.09.012 ↗
57. Sanches, P.L., Geaquinto, L.R.d.O., Cruz, R., Schuck, D.C., Lorencini, M., Granjeiro, J.M., and Ribeiro, A.R.L. (2020). Toxicity Evaluation of TiO2 Nanoparticles on the 3D Skin Model: A Systematic Review. Front. Bioeng. Biotechnol., 8.10.3389/fbioe.2020.00575 ↗
58. Effects of TiO2 on microstructural, mechanical properties and in-vitro bioactivity of plasma sprayed yttria stabilised zirconia coatings for dental application10.1016/j.ceramint.2017.12.008 ↗
59. Ge, R., Xun, C., Yang, J., Jia, W., and Li, Y. (2019). In vivo therapeutic effect of wollastonite and hydroxyapatite on bone defect. Biomed. Mater., 14.10.1088/1748-605X/ab4238 ↗
60. Plasma sprayed wollastonite/TiO2 composite coatings on titanium alloys10.1016/S0142-9612(02)00143-6 ↗
61. Structure and properties of the wollastonite–calcium phosphate coatings deposited on titanium and titanium–niobium alloy using microarc oxidation method10.1016/j.surfcoat.2016.08.062 ↗
62. The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting10.1016/j.msec.2012.09.008 ↗
63. Toxicity of nano-TiO2 on algae and the site of reactive oxygen species production10.1016/j.aquatox.2014.10.014 ↗
64. TiO2 nanowire and TiO2 nanowire doped Ag-PVP nanocomposite for antimicrobial and self-cleaning cotton textile10.1016/j.carbpol.2012.08.068 ↗
65. Toxicity of TiO2, ZrO2, Fe0, Fe2O3, and Mn2O3 nanoparticles to the yeast, Saccharomyces cerevisiae10.1016/j.chemosphere.2013.06.075 ↗
66. A bimetallic load-bearing bioceramics of TiO2@ZrO2 integrated polycaprolactone fibrous tissue construct exhibits anti bactericidal effect and induces osteogenesis in MC3T3-E1 cells10.1016/j.msec.2021.112501 ↗
67. Synthesis and Characterization of Hierarchical Mesoporous-Macroporous TiO2-ZrO2 Nanocomposite Scaffolds for Cancellous Bone Tissue Engineering Applications10.1155/2020/8305871 ↗
68. Effect of ZrO2 addition on the mechanical properties of porous TiO2 bone scaffolds10.1016/j.msec.2012.04.014 ↗
69. Screening of in vitro cytotoxicity, antioxidant potential and bioactivity of nano- and micro-ZrO2 and -TiO2 particles10.1016/j.ecoenv.2013.04.004 ↗
70. Lyashenko, E.N., Uzbekova, L.D., Polovinkina, V.V., Dorofeeva, A.K., Ibragimov, S.-U.S.-U., Tatamov, A.A., Avkaeva, A.G., Mikhailova, A.A., Tuaeva, I.S., and Esiev, R.K. (2023). Study of the Embryonic Toxicity of TiO2 and ZrO2 Nanoparticles. Micromachines, 14.10.3390/mi14020363 ↗
71. Osseointegration and osseoconductivity of hydroxyapatite of different microporosities10.1023/A:1020305008042 ↗
72. 3D printing magnesium-doped wollastonite/β-TCP bioceramics scaffolds with high strength and adjustable degradation10.1016/j.jeurceramsoc.2016.01.010 ↗
73. Study on antibacterial effect of 45S5 Bioglass®10.1007/s10856-008-3564-5 ↗
74. In vitro bioactivity and biocompatibility of lithium substituted 45S5 bioglass10.1016/j.msec.2011.07.011 ↗
75. Comparative study of biphasic calcium phosphate with beta-tricalcium phosphate in rat cranial defects—A molecular-biological and histological study10.1016/j.aanat.2013.12.001 ↗
76. Biphasic calcium phosphates (BCP) of hydroxyapatite (HA) and tricalcium phosphate (TCP) as bone substitutes: Importance of physicochemical characterizations in biomaterials studies10.1016/j.dib.2016.11.080 ↗
77. 3D Printing of Plain and Gradient Cermets with Efficient Use of Raw Materials10.4028/www.scientific.net/KEM.799.239 ↗
78. Recent advances in research on magnesium alloys and magnesium–calcium phosphate composites as biodegradable implant materials10.1177/0885328216657271 ↗
79. Development of magnesium calcium phosphate biocement for bone regeneration10.1098/rsif.2009.0559 ↗
80. Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: Effect of remelting10.1016/j.jmapro.2022.09.056 ↗
81. Hybrid metal-ceramic biomaterials fabricated through powder bed fusion and powder metallurgy for improved impact resistance of craniofacial implants10.1016/j.mtla.2022.101465 ↗
82. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
83. Modelling of impact-abrasive wear of ceramic, metallic, and composite materials10.3176/proc.2019.2.11 ↗
84. Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting10.1016/j.actbio.2011.01.037 ↗
85. Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting10.1016/j.apsusc.2013.11.069 ↗
86. Egan, D.S., and Dowling, D.P. (2020). Correlating in-situ process monitoring data with the reduction in load bearing capacity of selective laser melted Ti-6Al-4V porous biomaterials. J. Mech. Behav. Biomed. Mater., 106.10.1016/j.jmbbm.2020.103723 ↗
87. The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting10.1080/17452759.2016.1142215 ↗
88. On the effect of scanning strategies in the selective laser melting process10.1080/17452751003688368 ↗
89. Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting10.1080/17452759.2015.1026045 ↗
90. Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments10.1002/adem.201300409 ↗
91. Cavaliere, P., Sadeghi, B., and Shabani, A. (2019). Spark Plasma Sintering of Materials: Advances in Processing and Applications, Springer.10.1007/978-3-030-05327-7 ↗
92. Spark Plasma Sintering of Alumina10.1111/j.1151-2916.2002.tb00381.x ↗
93. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
94. Fabrication, pore structure and compressive behavior of anisotropic porous titanium for human trabecular bone implant applications10.1016/j.jmbbm.2015.02.023 ↗
95. Ti-based bulk metallic glass implantable biomaterial with adjustable porosity produced by a novel pressure regulation method in spark plasma sintering10.1016/j.intermet.2021.107105 ↗
96. Spark plasma sintering synthesis of porous nanocrystalline titanium alloys for biomedical applications10.1016/j.bioeng.2007.08.008 ↗
97. Human osteoblast-like cells (MG63) proliferate on a bioactive glass surface10.1002/(SICI)1097-4636(19971205)37:3<394::AID-JBM10>3.0.CO;2-C ↗
98. Mechanical behaviors of porous Ti with high porosity and large pore size prepared by one-step spark plasma sintering technique10.1016/j.vacuum.2015.09.024 ↗
99. Novel silicon-wollastonite based scaffolds for bone tissue engineering produced by selective laser melting10.1016/j.ceramint.2019.08.208 ↗
100. The mechanical behaviour of cancellous bone10.1016/0021-9290(85)90287-8 ↗