3D-Printed GelMA/PEGDA/F127DA Scaffolds for Bone Regeneration
Source abstract
Abstract
Tissue-engineered scaffolds are an effective method for the treatment of bone defects, and their structure and function are essential for bone regeneration. Digital light processing (DLP) printing technology has been widely used in bone tissue engineering (BTE) due to its high printing resolution and gentle printing process. As commonly used bioinks, synthetic polymers such as polyethylene glycol diacrylate (PEGDA) and Pluronic F127 diacrylate (F127DA) have satisfactory printability and mechanical properties but usually lack sufficient adhesion to cells and tissues. Here, a compound BTE scaffold based on PEGDA, F127DA, and gelatin methacrylate (GelMA) was successfully prepared using DLP printing technology. The scaffold not only facilitated the adhesion and proliferation of cells, but also effectively promoted the osteogenic differentiation of mesenchymal stem cells in an osteoinductive environment. Moreover, the bone tissue volume/total tissue volume (BV/TV) of the GelMA/PEGDA/F127DA (GPF) scaffold in vivo was 49.75 ± 8.50%, higher than the value of 37.10 ± 7.27% for the PEGDA/F127DA (PF) scaffold and 20.43 ± 2.08% for the blank group. Therefore, the GPF scaffold prepared using DLP printing technology provides a new approach to the treatment of bone defects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Orthopaedics, Chinese PLA General Hospital, Beijing 100039, China
Medical School of Chinese PLA, Beijing 100039, China
National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing 100853, China
Funding
Key Program of the National Natural Science Foundation of China · Beijing Municipal Natural Science Foundation · the Military Medical Science and Technology Youth Training Program
References (54)
Show source-provided references
1. FDA-approved bone grafts and bone graft substitute devices in bone regeneration10.1016/j.msec.2021.112466 ↗
2. Natural Medicinal Compounds in Bone Tissue Engineering10.1016/j.tibtech.2019.11.005 ↗
3. Silk Biomaterials for Bone Tissue Engineering10.1002/mabi.202100153 ↗
4. Four-dimensional bioprinting: Current developments and applications in bone tissue engineering10.1016/j.actbio.2019.10.038 ↗
5. An introduction to bone tissue engineering10.1177/0391398819876286 ↗
6. Bone Tissue Engineering via Carbon-Based Nanomaterials10.1002/adhm.201901495 ↗
7. Application of 3D Printing Technology in Bone Tissue Engineering: A Review10.2174/18755704MTExsNDcy2 ↗
8. Progress in 3D bioprinting technology for tissue/organ regenerative engineering10.1016/j.biomaterials.2019.119536 ↗
9. Biomaterials in bone and mineralized tissue engineering using 3D printing and bioprinting technologies10.1088/2057-1976/ac21ab ↗
10. Digital light processing (DLP) in tissue engineering: From promise to reality, and perspectives10.1088/1748-605X/ac96ba ↗
11. Etemad-Shahidi, Y., Qallandar, O.B., Evenden, J., Alifui-Segbaya, F., and Ahmed, K.E. (2020). Accuracy of 3-Dimensionally Printed Full-Arch Dental Models: A Systematic Review. J. Clin. Med., 9.10.3390/jcm9103357 ↗
12. Digital Light Processing Based Three-dimensional Printing for Medical Applications10.18063/ijb.v6i1.242 ↗
13. Digital Light Processing Bioprinting Advances for Microtissue Models10.1021/acsbiomaterials.1c01509 ↗
14. Digital light processing-based multi-material bioprinting: Processes, applications, and perspectives10.1002/jbm.a.37473 ↗
15. 3D printing of complex GelMA-based scaffolds with nanoclay10.1088/1758-5090/ab0cf6 ↗
16. Patient-Specific Bone Particles Bioprinting for Bone Tissue Engineering10.1002/adhm.202001323 ↗
17. Highly extensible, tough, and elastomeric nanocomposite hydrogels from poly(ethylene glycol) and hydroxyapatite nanoparticles10.1021/bm200027z ↗
18. Chondroitin Sulfate-Based Biomineralizing Surface Hydrogels for Bone Tissue Engineering10.1021/acsami.7b04114 ↗
19. Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery10.1016/j.msec.2017.11.025 ↗
20. Fabrication of sulphonated poly(ethylene glycol)-diacrylate hydrogel as a bone grafting scaffold10.1007/s10856-018-6199-1 ↗
21. Hydrogels based on poly(ethylene glycol) as scaffolds for tissue engineering application: Biocompatibility assessment and effect of the sterilization process10.1007/s10856-016-5793-3 ↗
22. Hemostats, sealants, and adhesives: Components of the surgical toolbox10.1111/j.1537-2995.2008.01703.x ↗
23. Sousa, A.C., Biscaia, S., Alvites, R., Branquinho, M., Lopes, B., Sousa, P., Valente, J., Franco, M., Santos, J.D., and Mendonça, C. (2022). Assessment of 3D-Printed Polycaprolactone, Hydroxyapatite Nanoparticles and Diacrylate Poly(ethylene glycol) Scaffolds for Bone Regeneration. Pharmaceutics, 14.10.20944/preprints202210.0436.v1 ↗
24. mSLA-based 3D printing of acrylated epoxidized soybean oil—Nano-hydroxyapatite composites for bone repair10.1016/j.msec.2021.112456 ↗
25. Wang, Y., Cao, X., Ma, M., Lu, W., Zhang, B., and Guo, Y. (2020). A GelMA-PEGDA-nHA Composite Hydrogel for Bone Tissue Engineering. Materials, 13.10.3390/ma13173735 ↗
26. 3D-Bioprinted Osteoblast-Laden Nanocomposite Hydrogel Constructs with Induced Microenvironments Promote Cell Viability, Differentiation, and Osteogenesis both In Vitro and In Vivo10.1002/advs.201700550 ↗
27. Desktop-Stereolithography 3D Printing of a Polyporous Extracellular Matrix Bioink for Bone Defect Regeneration10.3389/fbioe.2020.589094 ↗
28. Non-swelling hydrogel-based microfluidic chips10.1039/C9LC00564A ↗
29. Non-swellable F127-DA hydrogel with concave microwells for formation of uniform-sized vascular spheroids10.1039/D0RA06188C ↗
30. Super Tough, Ultrastretchable, and Thermoresponsive Hydrogels with Functionalized Triblock Copolymer Micelles as Macro-Cross-Linkers10.1021/mz500221j ↗
31. Untangling the response of bone tumor cells and bone forming cells to matrix stiffness and adhesion ligand density by means of hydrogels10.1016/j.biomaterials.2018.10.015 ↗
32. Bioinspired structural color patch with anisotropic surface adhesion10.1126/sciadv.aax8258 ↗
33. Mussel-inspired self-adhesive hydrogels by conducting free radical polymerization in both aqueous phase and micelle phase and their applications in flexible sensors10.1016/j.jcis.2021.08.205 ↗
34. Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels10.1016/j.biomaterials.2015.08.045 ↗
35. A strongly adhesive hemostatic hydrogel for the repair of arterial and heart bleeds10.1038/s41467-019-10004-7 ↗
36. Cell-Free Bilayered Porous Scaffolds for Osteochondral Regeneration Fabricated by Continuous 3D-Printing Using Nascent Physical Hydrogel as Ink10.1002/adhm.202001404 ↗
37. 3D printing of conch-like scaffolds for guiding cell migration and directional bone growth10.1016/j.bioactmat.2022.09.014 ↗
38. DLP-based bioprinting of void-forming hydrogels for enhanced stem-cell-mediated bone regeneration10.1016/j.mtbio.2022.100487 ↗
39. Three-Dimensional Printing of Large-Scale, High-Resolution Bioceramics with Micronano Inner Porosity and Customized Surface Characterization Design for Bone Regeneration10.1021/acsami.1c22868 ↗
40. Lithography-Based 3D Bioprinting and Bioinks for Bone Repair and Regeneration10.1021/acsbiomaterials.9b01818 ↗
41. 3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair10.18063/ijb.v7i3.367 ↗
42. Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering10.1016/j.msec.2019.110054 ↗
43. 3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration10.1126/sciadv.aaz6725 ↗
44. Putra, R.U., Basri, H., Prakoso, A.T., Chandra, H., Ammarullah, M.I., Akbar, I., Syahrom, A., and Kamarul, T. (2023). Level of Activity Changes Increases the Fatigue Life of the Porous Magnesium Scaffold, as Observed in Dynamic Immersion Tests, over Time. Sustainability, 15.10.3390/su15010823 ↗
45. Adhesive polyethylene glycol-based hydrogel patch for tissue repair10.1016/j.colsurfb.2022.112751 ↗
46. Wang, Y., Ma, M., Wang, J., Zhang, W., Lu, W., Gao, Y., Zhang, B., and Guo, Y. (2018). Development of a Photo-Crosslinking, Biodegradable GelMA/PEGDA Hydrogel for Guided Bone Regeneration Materials. Materials, 11.10.3390/ma11081345 ↗
47. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
48. The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in an in vivo model10.1002/jbm.a.32381 ↗
49. The contribution of pore size and porosity of 3D printed porous titanium scaffolds to osteogenesis10.1016/j.msec.2022.112651 ↗
50. Fang Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth10.1016/j.msec.2019.110289 ↗
51. Influence of porous tantalum scaffold pore size on osteogenesis and osteointegration: A comprehensive study based on 3D-printing technology10.1016/j.msec.2021.112382 ↗
52. Influence of pore size of porous titanium fabricated by vacuum diffusion bonding of titanium meshes on cell penetration and bone ingrowth10.1016/j.actbio.2016.01.022 ↗
53. Pore Size of 3D-Printed Polycaprolactone/Polyethylene Glycol/Hydroxyapatite Scaffolds Affects Bone Regeneration by Modulating Macrophage Polarization and the Foreign Body Response10.1021/acsami.2c02001 ↗
54. Jamari, J., Ammarullah, M.I., Saad, A.P.M., Syahrom, A., Uddin, M., van der Heide, E., and Basri, H. (2021). The Effect of Bottom Profile Dimples on the Femoral Head on Wear in Metal-on-Metal Total Hip Arthroplasty. J. Funct. Biomater., 12.10.3390/jfb12020038 ↗