journal article·2023-12-22Open access

Biomaterials Adapted to Vat Photopolymerization in 3D Printing: Characteristics and Medical Applications

Iosif-Aliodor Timofticiuc, Octavian Călinescu, Adrian Iftime, Serban Dragosloveanu, Ana Caruntu, Andreea-Elena Scheau, Ioana Anca Badarau, Andreea Cristiana Didilescu, Constantin Caruntu, Cristian Scheau

Abstract

Along with the rapid and extensive advancements in the 3D printing field, a diverse range of uses for 3D printing have appeared in the spectrum of medical applications. Vat photopolymerization (VPP) stands out as one of the most extensively researched methods of 3D printing, with its main advantages being a high printing speed and the ability to produce high-resolution structures. A major challenge in using VPP 3D-printed materials in medicine is the general incompatibility of standard VPP resin mixtures with the requirements of biocompatibility and biofunctionality. Instead of developing completely new materials, an alternate approach to solving this problem involves adapting existing biomaterials. These materials are incompatible with VPP 3D printing in their pure form but can be adapted to the VPP chemistry and general process through the use of innovative mixtures and the addition of specific pre- and post-printing steps. This review’s primary objective is to highlight biofunctional and biocompatible materials that have been adapted to VPP. We present and compare the suitability of these adapted materials to different medical applications and propose other biomaterials that could be further adapted to the VPP 3D printing process in order to fulfill patient-specific medical requirements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physiology, The “Carol Davila” University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania

Department of Biophysics, The “Carol Davila” University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania

Department of Orthopaedics and Traumatology, The “Carol Davila” University of Medicine and Pharmacy, 050474 Bucharest, Romania

Department of Orthopaedics, “Foisor” Clinical Hospital of Orthopaedics, Traumatology and Osteoarticular TB, 021382 Bucharest, Romania

Department of Oral and Maxillofacial Surgery, “Carol Davila” Central Military Emergency Hospital, 010825 Bucharest, Romania

Department of Oral and Maxillofacial Surgery, Faculty of Dental Medicine, Titu Maiorescu University, 031593 Bucharest, Romania

Department of Radiology and Medical Imaging, Fundeni Clinical Institute, 022328 Bucharest, Romania

Department of Embryology, Faculty of Dentistry, The “Carol Davila” University of Medicine and Pharmacy, 8 Eroii Sanitari Boulevard, 050474 Bucharest, Romania

Department of Dermatology, “Prof. N.C. Paulescu” National Institute of Diabetes, Nutrition and Metabolic Diseases, 011233 Bucharest, Romania

Department of Radiology and Medical Imaging, “Foisor” Clinical Hospital of Orthopaedics, Traumatology and Osteoarticular TB, 021382 Bucharest, Romania

References (100+)

Show source-provided references
1. Jakus, A.E. (2019). 3D Printing in Orthopaedic Surgery, Elsevier Health Sciences.
2. Christakopoulos, F., van Heugten, P.M.H., and Tervoort, T.A. (2022). Additive Manufacturing of Polyolefins. Polymers, 14.10.3390/polym14235147 ↗
3. Additive manufacturing in South Africa: Critical success factors10.1016/j.heliyon.2022.e11852 ↗
4. Salmi, M. (2021). Additive Manufacturing Processes in Medical Applications. Materials, 14.10.3390/ma14010191 ↗
5. A Review of 3D Printing Technology for Medical Applications10.1016/j.eng.2018.07.021 ↗
6. 3D Printing as a Promising Tool in Personalized Medicine10.1208/s12249-020-01905-8 ↗
7. (2021). Additive Manufacturing—General Principles—Fundamentals and Vocabulary. Standard No. ASTM52900-21.
8. 3D Printing: Applications in Tissue Engineering, Medical Devices, and Drug Delivery10.1208/s12249-022-02242-8 ↗
9. The state of additive manufacturing in dental research—A systematic scoping review of 2012–202210.1016/j.heliyon.2023.e17462 ↗
10. Alshamrani, A., Alhotan, A., Owais, A., and Ellakwa, A. (2023). The Clinical Potential of 3D-Printed Crowns Reinforced with Zirconia and Glass Silica Microfillers. J. Funct. Biomater., 14.10.3390/jfb14050267 ↗
11. Zoabi, A., Redenski, I., Oren, D., Kasem, A., Zigron, A., Daoud, S., Moskovich, L., Kablan, F., and Srouji, S. (2022). 3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery. J. Clin. Med., 11.10.3390/jcm11092385 ↗
12. Vasiliadis, A.V., Koukoulias, N., and Katakalos, K. (2022). From Three-Dimensional (3D)- to 6D-Printing Technology in Orthopedics: Science Fiction or Scientific Reality?. J. Funct. Biomater., 13.10.3390/jfb13030101 ↗
13. Applications of nanotechnology in 3D printed tissue engineering scaffolds10.1016/j.ejpb.2021.01.018 ↗
14. 3D printed wound constructs for skin tissue engineering: A systematic review in experimental animal models10.1002/jbm.b.35237 ↗
15. Gao, J., Li, M., Cheng, J., Liu, X., Liu, Z., Liu, J., and Tang, P. (2023). 3D-Printed GelMA/PEGDA/F127DA Scaffolds for Bone Regeneration. J. Funct. Biomater., 14.10.3390/jfb14020096 ↗
16. 3D Patterning of cells in Magnetic Scaffolds for Tissue Engineering10.1038/s41598-020-58738-5 ↗
17. 3D-printed poly(ε-caprolactone) scaffold integrated with cell-laden chitosan hydrogels for bone tissue engineering10.1038/s41598-017-13838-7 ↗
18. Tissue-engineered trachea from a 3D-printed scaffold enhances whole-segment tracheal repair10.1038/s41598-017-05518-3 ↗
19. 3D-engineering of cellularized conduits for peripheral nerve regeneration10.1038/srep32184 ↗
20. Li, Y., Zhang, X., Zhang, X., Zhang, Y., and Hou, D. (2023). Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications. Polymers, 15.10.3390/polym15193940 ↗
21. Review on vat photopolymerization additive manufacturing of bioactive ceramic bone scaffolds10.1039/D3TB01236K ↗
22. Pagac, M., Hajnys, J., Ma, Q.P., Jancar, L., Jansa, J., Stefek, P., and Mesicek, J. (2021). A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing. Polymers, 13.10.3390/polym13040598 ↗
23. Additive manufacturing technologies with emphasis on stereolithography 3D printing in pharmaceutical and medical applications: A review
24. Photopolymerization in 3D printing10.1021/acsapm.8b00165 ↗
25. Lee, H.E., Alauddin, M.S., Mohd Ghazali, M.I., Said, Z., and Mohamad Zol, S. (2023). Effect of Different Vat Polymerization Techniques on Mechanical and Biological Properties of 3D-Printed Denture Base. Polymers, 15.10.3390/polym15061463 ↗
26. Paral, S.K., Lin, D.Z., Cheng, Y.L., Lin, S.C., and Jeng, J.Y. (2023). A Review of Critical Issues in High-Speed Vat Photopolymerization. Polymers, 15.10.3390/polym15122716 ↗
27. A methodology for two-photon polymerization micro 3D printing of objects with long overhanging structures
28. 3D printing of biomedically relevant polymer materials and biocompatibility10.1557/s43579-021-00038-8 ↗
29. Designing Biomaterials for 3D Printing10.1021/acsbiomaterials.6b00121 ↗
30. Jersovaite, J., Sarachovaite, U., Matulaitiene, I., Niaura, G., Baltriukiene, D., and Malinauskas, M. (2023). Biocompatibility enhancement via post-processing of microporous scaffolds made by optical 3D printer. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1167753 ↗
31. Recent Advances in Additive Manufacturing, Applications and Challenges for Dentistry: A Review10.1021/acsbiomaterials.2c01561 ↗
32. Vat photopolymerization-based 3D printing of polymer nanocomposites: Current trends and applications10.1039/D2RA06522C ↗
33. Branco, A.C., Colaço, R., Figueiredo-Pina, C.G., and Serro, A.P. (2023). Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review. Materials, 16.10.3390/ma16051860 ↗
34. Understanding and Improving Mechanical Properties in 3D printed Parts Using a Dual-Cure Acrylate-Based Resin for Stereolithography10.1002/adem.201800876 ↗
35. Vat photopolymerization of polymers and polymer composites: Processes and applications
36. A review on stereolithography and its applications in biomedical engineering10.1016/j.biomaterials.2010.04.050 ↗
37. Hwangbo, N.-K., Nam, N.-E., Choi, J.-H., and Kim, J.-E. (2021). Effects of the Washing Time and Washing Solution on the Biocompatibility and Mechanical Properties of 3D Printed Dental Resin Materials. Polymers, 13.10.3390/polym13244410 ↗
38. From resin formulation and process parameters to the final mechanical properties of 3D printed acrylate materials10.1557/s43579-023-00352-3 ↗
39. Nowacki, B., Kowol, P., Koziol, M., Olesik, P., Wieczorek, J., and Waclawiak, K. (2021). Effect of Post-Process Curing and Washing Time on Mechanical Properties of mSLA Printouts. Materials, 14.10.3390/ma14174856 ↗
40. Dental resins used in 3D printing technologies release ovo-toxic leachates10.1016/j.chemosphere.2020.129003 ↗
41. Digital light processing of high-strength hydroxyapatite ceramics: Role of particle size and printing parameters on microstructural defects and mechanical properties10.1016/j.jeurceramsoc.2022.11.047 ↗
42. Sim, J.-H., Koo, B.-K., Jung, M., and Kim, D.-S. (2022). Study on Debinding and Sintering Processes for Ceramics Fabricated Using Digital Light Processing (DLP) 3D Printing. Processes, 10.10.3390/pr10112467 ↗
43. Thurzo, A., Galfiova, P., Novakova, Z.V., Polak, S., Varga, I., Strunga, M., Urban, R., Surovkova, J., Lesko, L., and Hajduchova, Z. (2022). Fabrication and In Vitro Characterization of Novel Hydroxyapatite Scaffolds 3D Printed Using Polyvinyl Alcohol as a Thermoplastic Binder. Int. J. Mol. Sci., 23.10.20944/preprints202211.0141.v1 ↗
44. Digital light processing stereolithography of hydroxyapatite scaffolds with bone-like architecture, permeability, and mechanical properties10.1111/jace.17843 ↗
45. Nanohydroxyapatite application to osteoporosis management10.1155/2013/679025 ↗
46. Mohd, N., Razali, M., Ghazali, M.J., and Abu Kasim, N.H. (2022). 3D-Printed Hydroxyapatite and Tricalcium Phosphates-Based Scaffolds for Alveolar Bone Regeneration in Animal Models: A Scoping Review. Materials, 15.10.3390/ma15072621 ↗
47. Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review10.1021/acsbiomaterials.2c00140 ↗
48. 3D Printing of Scaffolds for Tissue Regeneration Applications10.1002/adhm.201500168 ↗
49. Three-Dimensional Printing of Large-Scale, High-Resolution Bioceramics with Micronano Inner Porosity and Customized Surface Characterization Design for Bone Regeneration10.1021/acsami.1c22868 ↗
50. Lim, H.K., Hong, S.J., Byeon, S.J., Chung, S.M., On, S.W., Yang, B.E., Lee, J.H., and Byun, S.H. (2020). 3D-Printed Ceramic Bone Scaffolds with Variable Pore Architectures. Int. J. Mol. Sci., 21.10.3390/ijms21186942 ↗
51. Morphologies, mechanical and in vitro behaviors of DLP-based 3D printed HA scaffolds with different structural configurations10.1039/D3RA03080F ↗
52. Chen, J., Gui, X., Qiu, T., Lv, Y., Fan, Y., Zhang, X., Zhou, C., and Guo, W. (2023). DLP 3D printing of high-resolution root scaffold with bionic bioactivity and biomechanics for personalized bio-root regeneration. Biomater. Adv., 151.10.1016/j.bioadv.2023.213475 ↗
53. Martinez, J.S., Peterson, S., Hoel, C.A., Erno, D.J., Murray, T., Boyd, L., Her, J.H., McLean, N., Davis, R., and Ginty, F. (2022). High resolution DLP stereolithography to fabricate biocompatible hydroxyapatite structures that support osteogenesis. PLoS ONE, 17.10.1371/journal.pone.0272283 ↗
54. Hubbe, U., Beiser, S., Kuhn, S., Stark, T., Hoess, A., Cristina-Schmitz, H., Vasilikos, I., Metzger, M.C., and Rothweiler, R. (2022). A fully ingrowing implant for cranial reconstruction: Results in critical size defects in sheep using 3D-printed titanium scaffold. Biomater. Adv., 136.10.1016/j.bioadv.2022.212754 ↗
55. Morimoto, T., Hirata, H., Eto, S., Hashimoto, A., Kii, S., Kobayashi, T., Tsukamoto, M., Yoshihara, T., Toda, Y., and Mawatari, M. (2022). Development of Silver-Containing Hydroxyapatite-Coated Antimicrobial Implants for Orthopaedic and Spinal Surgery. Medicina, 58.10.3390/medicina58040519 ↗
56. Plasma Spray vs. Electrochemical Deposition: Toward a Better Osteogenic Effect of Hydroxyapatite Coatings on 3D-Printed Titanium Scaffolds10.3389/fbioe.2021.705774 ↗
57. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
58. Osteoconduction at porous hydroxyapatite with various pore configurations10.1016/S0142-9612(00)00030-2 ↗
59. 3D-Plotted Beta-Tricalcium Phosphate Scaffolds with Smaller Pore Sizes Improve In Vivo Bone Regeneration and Biomechanical Properties in a Critical-Sized Calvarial Defect Rat Model10.1002/adhm.201800441 ↗
60. Jing, Z., Zhang, T., Xiu, P., Cai, H., Wei, Q., Fan, D., Lin, X., Song, C., and Liu, Z. (2020). Functionalization of 3D-printed titanium alloy orthopedic implants: A literature review. Biomed. Mater., 15.10.1088/1748-605X/ab9078 ↗
61. Novel Zirconia Materials in Dentistry10.1177/0022034517737483 ↗
62. Current classification of zirconia in dentistry: An updated review10.7717/peerj.15669 ↗
63. Dense ceramics with complex shape fabricated by 3D printing: A review10.1007/s40145-020-0444-z ↗
64. Jang, J.G., Kang, J.H., Joe, K.B., Sakthiabirami, K., Jang, K.J., Jun, M.J., Oh, G.J., Park, C., and Park, S.W. (2022). Evaluation of Physical Properties of Zirconia Suspension with Added Silane Coupling Agent for Additive Manufacturing Processes. Materials, 15.10.3390/ma15041337 ↗
65. Komissarenko, D.A., Sokolov, P.S., Evstigneeva, A.D., Shmeleva, I.A., and Dosovitsky, A.E. (2018). Rheological and Curing Behavior of Acrylate-Based Suspensions for the DLP 3D Printing of Complex Zirconia Parts. Materials, 11.10.3390/ma11122350 ↗
66. Son, M., Raju, K., Lee, J., Jung, J., Jeong, S., Kim, J.I., and Cho, J. (2023). 3D Printing of CNT- and YSZ-Added Dental Resin-Based Composites by Digital Light Processing and Their Mechanical Properties. Materials, 16.10.3390/ma16051873 ↗
67. Coppola, B., Montanaro, L., and Palmero, P. (2022). DLP Fabrication of Zirconia Scaffolds Coated with HA/beta-TCP Layer: Role of Scaffold Architecture on Mechanical and Biological Properties. J. Funct. Biomater., 13.10.3390/jfb13030148 ↗
68. Sarwar, W.A., Kang, J.H., and Yoon, H.I. (2021). Optimized Zirconia 3D Printing Using Digital Light Processing with Continuous Film Supply and Recyclable Slurry System. Materials, 14.10.20944/preprints202106.0385.v1 ↗
69. Zirconia based dental ceramics: Structure, mechanical properties, biocompatibility and applications10.1039/C6DT03484E ↗
70. Enhanced reliability of yttria-stabilized zirconia for dental applications10.1016/j.actbio.2015.01.023 ↗
71. Piconi, C., and Sprio, S. (2021). Oxide bioceramic composites in orthopedics and dentistry. J. Compos. Sci., 5.10.3390/jcs5080206 ↗
72. Characteristics and osteogenic effect of zirconia porous scaffold coated with beta-TCP/HA10.4047/jap.2014.6.4.285 ↗
73. Macan, J., Sikiric, M.D., Deluca, M., Bermejo, R., Baudin, C., Plodinec, M., Salamon, K., Ceh, M., and Gajovic, A. (2020). Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite. J. Mech. Behav. Biomed. Mater., 111.10.1016/j.jmbbm.2020.104006 ↗
74. Kang, J.H., Sakthiabirami, K., Kim, H.A., Hosseini Toopghara, S.A., Jun, M.J., Lim, H.P., Park, C., Yun, K.D., and Park, S.W. (2022). Effects of UV Absorber on Zirconia Fabricated with Digital Light Processing Additive Manufacturing. Materials, 15.10.3390/ma15248726 ↗
75. Vat Polymerization-Printed Partially Stabilized Zirconia: Mechanical Properties, Reliability and Structural defects
76. Computational study of structural, elastic and electronic properties of lithium disilicate (Li(2)Si(2)O(5)) glass-ceramic10.1016/j.jmbbm.2013.10.029 ↗
77. Kraipok, A., Mamanee, T., Ruangsuriya, J., Nawarat, P., and Leenakul, W. (2022). Phase Formation, Mechanical Strength, and Bioactive Properties of Lithium Disilicate Glass-Ceramics with Different Al(2)O(3) Contents. Materials, 15.10.3390/ma15238283 ↗
78. CAD/CAM versus 3D-printing/pressed lithium disilicate monolithic crowns: Adaptation and fatigue behavior10.1016/j.jdent.2022.104181 ↗
79. Unkovskiy, A., Beuer, F., Metin, D.S., Bomze, D., Hey, J., and Schmidt, F. (2022). Additive Manufacturing of Lithium Disilicate with the LCM Process for Classic and Non-Prep Veneers: Preliminary Technical and Clinical Case Experience. Materials, 15.10.3390/ma15176034 ↗
80. Clinical results of lithium-disilicate crowns after up to 9 years of service10.1007/s00784-012-0700-x ↗
81. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: A systematic review10.1016/j.prosdent.2014.01.005 ↗
82. Comparison of marginal and internal fit of pressed lithium disilicate veneers fabricated via a manual waxing technique versus a 3D printed technique10.1111/jerd.12675 ↗
83. Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies10.1016/j.prosdent.2017.07.025 ↗
84. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics10.1002/1097-4636(2000)53:4<297::AID-JBM3>3.0.CO;2-G ↗
85. Properties, crystallization mechanism and microstructure of lithium disilicate glass–ceramic10.1016/j.jnoncrysol.2009.11.015 ↗
86. A systematic review and meta analysis of the longevity of anterior and posterior all-ceramic crowns10.1016/j.jdent.2016.08.009 ↗
87. Synthesis of beta-tricalcium phosphate10.1016/j.morpho.2017.06.002 ↗
88. beta-tricalcium phosphate for bone substitution: Synthesis and properties10.1016/j.actbio.2020.06.022 ↗
89. Schmidleithner, C., Malferrari, S., Palgrave, R., Bomze, D., Schwentenwein, M., and Kalaskar, D.M. (2019). Application of high resolution DLP stereolithography for fabrication of tricalcium phosphate scaffolds for bone regeneration. Biomed. Mater., 14.10.1088/1748-605X/ab279d ↗
90. Wang, D., Hou, J., Xia, C., Wei, C., Zhu, Y., Qian, W., Qi, S., Wu, Y., Shi, Y., and Qin, K. (2021). Multi-element processed pyritum mixed to beta-tricalcium phosphate to obtain a 3D-printed porous scaffold: An option for treatment of bone defects. Mater. Sci. Eng. C Mater. Biol. Appl., 128.10.1016/j.msec.2021.112326 ↗
91. Zhang, H., Zhang, H., Xiong, Y., Dong, L., and Li, X. (2021). Development of hierarchical porous bioceramic scaffolds with controlled micro/nano surface topography for accelerating bone regeneration. Mater. Sci. Eng. C Mater. Biol. Appl., 130.10.1016/j.msec.2021.112437 ↗
92. Qi, D., Su, J., Li, S., Zhu, H., Cheng, L., Hua, S., Yuan, X., Jiang, J., Shu, Z., and Shi, Y. (2022). 3D printed magnesium-doped beta-TCP gyroid scaffold with osteogenesis, angiogenesis, immunomodulation properties and bone regeneration capability in vivo. Biomater. Adv., 136.10.1016/j.bioadv.2022.212759 ↗
93. Recent Advances of Biphasic Calcium Phosphate Bioceramics for Bone Tissue Regeneration10.1007/978-981-15-3262-7_12 ↗
94. Oberdiek, F., Vargas, C.I., Rider, P., Batinic, M., Gorke, O., Radenkovic, M., Najman, S., Baena, J.M., Jung, O., and Barbeck, M. (2021). Ex Vivo and In Vivo Analyses of Novel 3D-Printed Bone Substitute Scaffolds Incorporating Biphasic Calcium Phosphate Granules for Bone Regeneration. Int. J. Mol. Sci., 22.10.3390/ijms22073588 ↗
95. Nano-biphasic calcium phosphate/polyvinyl alcohol composites with enhanced bioactivity for bone repair via low-temperature three-dimensional printing and loading with platelet-rich fibrin10.2147/IJN.S152105 ↗
96. Applying extrusion-based 3D printing technique accelerates fabricating complex biphasic calcium phosphate-based scaffolds for bone tissue regeneration10.1016/j.jare.2021.12.012 ↗
97. Hong, H., Seo, Y.B., Kim, D.Y., Lee, J.S., Lee, Y.J., Lee, H., Ajiteru, O., Sultan, M.T., Lee, O.J., and Kim, S.H. (2020). Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering. Biomaterials, 232.10.1016/j.biomaterials.2019.119679 ↗
98. Seo, Y.W., Park, J.Y., Lee, D.N., Jin, X., Cha, J.K., Paik, J.W., and Choi, S.H. (2022). Three-dimensionally printed biphasic calcium phosphate blocks with different pore diameters for regeneration in rabbit calvarial defects. Biomater. Res., 26.10.1186/s40824-022-00271-9 ↗
99. Effect of process parameters on the characteristics of porous calcium phosphate ceramics for bone tissue scaffolds10.1046/j.1525-1594.2003.07247.x ↗
100. Biodegradation property of beta-tricalcium phosphate-collagen composite in accordance with bone formation: A comparative study with Bio-Oss Collagen(R) in a rat critical-size defect model10.1111/j.1708-8208.2012.00467.x ↗