journal article·2022-07-21Open access

From Three-Dimensional (3D)- to 6D-Printing Technology in Orthopedics: Science Fiction or Scientific Reality?

Angelo V. Vasiliadis, Nikolaos Koukoulias, Konstantinos Katakalos

Abstract

Over the past three decades, additive manufacturing has changed from an innovative technology to an increasingly accessible tool in all aspects of different medical practices, including orthopedics. Although 3D-printing technology offers a relatively inexpensive, rapid and less risky route of manufacturing, it is still quite limited for the fabrication of more complex objects. Over the last few years, stable 3D-printed objects have been converted to smart objects or implants using novel 4D-printing systems. Four-dimensional printing is an advanced process that creates the final object by adding smart materials. Human bones are curved along their axes, a morphological characteristic that augments the mechanical strain caused by external forces. Instead of the three axes used in 4D printing, 5D-printing technology uses five axes, creating curved and more complex objects. Nowadays, 6D-printing technology marries the concepts of 4D- and 5D-printing technology to produce objects that change shape over time in response to external stimuli. In future research, it is obvious that printing technology will include a combination of multi-dimensional printing technology and smart materials. Multi-dimensional additive manufacturing technology will drive the printing dimension to higher levels of structural freedom and printing efficacy, offering promising properties for various orthopedic applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

2nd Orthopedic Department, General Hospital of Thessaloniki “Papageorgiou”, 56403 Thessaloniki, Greece

School of Medicine, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

Orthopedic Department, Sports Injuries Unit, Saint Luke’s Hospital, 55236 Thessaloniki, Greece

Laboratory for Strength of Materials and Structures, Department of Civil Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

References (27)

Show source-provided references
1. Trends in 3D printing processes for biomedical field: Opportunities and challenges10.1007/s10924-020-01722-x ↗
2. 3D printing and its application in orthopedics10.1016/j.jcot.2018.02.003 ↗
3. Vasiliadis, A.V., Koukoulias, N., and Katakalos, K. (2021). Three-dimensional-printed scaffolds for meniscus tissue engineering: Opportunity for the future in the orthopaedic world. J. Funct. Biomat., 12.10.3390/jfb12040069 ↗
4. Additive manufactruring (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
5. Courtial, E.-J., Colly, A., and Marquette, C. (2022). Dynamic molding: Additive manufacturing in partially ordered system. Addit. Manuf., 51.10.1016/j.addma.2022.102598 ↗
6. Duan, X., Wang, B., Yang, L., and Kadakia, A.R. (2021). Applications of 3D printing technology in orthopedic treatment. BioMed Res. Int., 2021.10.1155/2021/9892456 ↗
7. Use of three-dimensional printing in preoperative planning in orthopaedic trauma surgery: A systematic review and meta-analysis10.5312/wjo.v11.i1.57 ↗
8. Orthopaedic support with 3D printing in children: Marketing effect or solution of the future?
9. The effect of three-dimensional (3D) printing on quantitative and qualitative outcomes in paediatric orthopaedic osteotomies: A systematic review10.1302/2058-5241.6.200092 ↗
10. Application of 3D printing in hip and knee arthroplasty: A narrative review10.1007/s43465-020-00263-8 ↗
11. Tserovski, S., Georgieva, S., Simeonov, R., Bigdeli, A., Rottinger, H., and Kinov, P. (2019). Advantages and disadvantages of 3D printing for pre-operative planning of revision hip surgery. J. Surg. Case Rep., 2019.10.1093/jscr/rjz214 ↗
12. Bianchi, G., Frisoni, T., Spazzoli, B., Lucchese, A., and Donati, D. (2021). Computer assisted surgery and 3D printing in orthopaedic oncology: A lesson learned by cranio-maxillo-facial surgery. Appl. Sci., 11.10.3390/app11188584 ↗
13. Significant roles of 4D printing using smart materials in the field of manufacturing
14. 4D-printed dynamic materials in biomedical applications: Chemistry, challenges and their future perspectives in the clinical sector10.1021/acs.jmedchem.9b02115 ↗
15. Significant advancements of 4D printing in the field of orthopaedics10.1016/j.jcot.2020.04.021 ↗
16. Sahafnejad-Mohammadi, I., Karamimoghadam, M., Zolfagharian, A., Akrami, M., and Bodaghi, M. (2022). 4D printing technology in medical engineering: A narrative review. J. Braz. Soc. Mech. Sci. Eng., 44.10.1007/s40430-022-03514-x ↗
17. Four-dimensional bioprinting: Current developments and applications in bone tissue engineering10.1016/j.actbio.2019.10.038 ↗
18. 4D printing and its applications in Orthopaedics10.1016/j.jcot.2018.08.016 ↗
19. Hamza, H. (2018). Dental 4D printing: An innovative approach. Innovation, 1.
20. Development of bioimplants with 2D, 3D and 4D additive manufacturing materials10.1016/j.eng.2020.04.015 ↗
21. 5D printing and its expected applications in orthopaedics10.1016/j.jcot.2018.11.014 ↗
22. Georgantzinos, S.K., Giannopoulos, G.I., and Bakalis, P.A. (2021). Additive manufacturing for effective smart structures: The idea of 6D printing. J. Compos. Sci., 5.10.3390/jcs5050119 ↗
23. Ganesan, B., Luximon, A., Al-Jumaily, A., Balasankar, S.K., and Naik, G.R. (2017). Ponseti method in the management of clubfoot under 2 years of age: A systematic review. PLoS ONE, 12.10.1371/journal.pone.0178299 ↗
24. Tack, P., Victor, J., Gemmel, P., and Annemans, L. (2016). 3D-printing techniques in a medical setting: A systematic literature review. Biomed. Eng. Online, 15.10.1186/s12938-016-0236-4 ↗
25. Hada, T., Kanazawa, M., Iwaki, M., Arakida, T., Soeda, Y., Katheng, A., Otake, R., and Minakuchi, S. (2020). Effect of printing direction on the accuracy of 3D-printed dentures using stereolithography technology. Materials, 13.10.3390/ma13153405 ↗
26. Chu, H., Yang, E., Sun, L., Cai, S., Yang, R., Liang, W., Yu, H., and Liu, L. (2020). 4D printing: A review on recent progresses. Micromachines, 11.10.3390/mi11090796 ↗
27. Three ‘D’s: Design approach, dimensional printing, and drug delivery systems as promising tools in healthcare applications10.1016/j.drudis.2021.06.016 ↗