journal article·2023-03-16Open access

Biodegradable Materials for Tissue Engineering: Development, Classification and Current Applications

Marcel Modrák, Marianna Trebuňová, Alena Findrik Balogová, Radovan Hudák, Jozef Živčák

Abstract

The goal of this review is to map the current state of biodegradable materials that are used in tissue engineering for a variety of applications. At the beginning, the paper briefly identifies typical clinical indications in orthopedics for the use of biodegradable implants. Subsequently, the most frequent groups of biodegradable materials are identified, classified, and analyzed. To this end, a bibliometric analysis was applied to evaluate the evolution of the scientific literature in selected topics of the subject. The special focus of this study is on polymeric biodegradable materials that have been widely used for tissue engineering and regenerative medicine. Moreover, to outline current research trends and future research directions in this area, selected smart biodegradable materials are characterized, categorized, and discussed. Finally, pertinent conclusions regarding the applicability of biodegradable materials are drawn and recommendations for future research are suggested to drive this line of research forward.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical Engineering and Measurement, Faculty of Mechanical Engineering, Technical University of Košice, 042 00 Košice, Slovakia

Funding

KEGA—Cultural and Educational Grant Agency of the Ministry of Education, Science, Research and Sport of the Slovak Republic · VEGA—Scientific Grant Agency of the Ministry of Education, Science, Research and Sport of the Slovak Republic

References (100+)

Show source-provided references
1. Kroczek, K., Turek, P., Mazur, D., Szczygielski, J., Filip, D., Brodowski, R., Balawender, K., Przeszłowski, Ł., Lewandowski, B., and Orkisz, S. (2022). Characterisation of selected materials in medical applications. Polymers, 14.10.3390/polym14081526 ↗
2. Design of biodegradable, implantable devices towards clinical translation10.1038/s41578-019-0150-z ↗
3. Extracellular matrix revisited: Roles in tissue engineering10.5213/inj.1632600.318 ↗
4. Recent development and biomedical applications of decellularized extracellular matrix biomaterials10.1016/j.msec.2019.109942 ↗
5. Extracellular matrix structure10.1016/j.addr.2015.11.001 ↗
6. Bioabsorbable implants in forefoot surgery: A review of materials, possibilities and disadvantages10.1302/2058-5241.6.200157 ↗
7. Bone allograft provides bone healing in the medial opening high tibial osteotomy10.1007/s00264-009-0916-9 ↗
8. Materials and structures used in meniscus repair and regeneration: A review10.1051/bmdcn/2019090102 ↗
9. Application of biodegradable materials in orthopedics10.1007/s40846-019-00469-8 ↗
10. Biodegradable Implants in Orthopaedics
11. Claes, L., Burri, C., Kiefer, H., and Rübenacker, S. (1989, January 7–9). The refixation of osteochondral and bony fragments with various resorbable implants. Proceedings of the 8th European Conference on Biomaterials (ESB), Heidelberg, Germany.
12. Comparison of three different fixation constructs for radial neck fractures: A biomechanical study10.1186/s13018-017-0680-2 ↗
13. Resorbable implants and their use exemplified by fracture of the head of the radius
14. Open Reduction and Internal Fixation of Radial-Head Fractures Mason Type II10.21608/ejhm.2022.277586 ↗
15. Tarallo, L., Mugnai, R., Rocchi, M., Capra, F., and Catani, F. (2018). Comparison between absorbable pins and mini-screw fixations for the treatment of radial head fractures Mason type II-III. BMC Musculoskelet. Disord., 19.10.1186/s12891-018-2014-x ↗
16. Diagnostic and Therapeutic Approach to Acute Scaphoid Fractures10.1055/s-0040-1718457 ↗
17. Preliminary results of reinsertion of ruptured ulnar collateral ligament of the first metacarpophalangeal joint with totally biodegradable polylactide (PLLA) pin
18. Biodegradable internal fixation for malleolar fractures: A prospective randomised trial10.1302/0301-620X.69B4.3611169 ↗
19. Ankle fractures treated using biodegradable internal fixation10.1097/00003086-198901000-00028 ↗
20. Degradable polyglycolide rods for the internal fixation of displaced bimalleolar fractures
21. Absorbable polyglycolide pins in fixation of displaced fractures of the radial head10.1007/BF00419939 ↗
22. Biodegradable implants in traumatology: A review on the state-of-the-art10.1007/BF00443385 ↗
23. Local foreign-body reactions to biodegradable implants A classification system: A classification system
24. Study of corrosion in biocompatible metals for implants: A review10.1016/j.jallcom.2017.01.196 ↗
25. Implant biomaterials: A comprehensive review10.12998/wjcc.v3.i1.52 ↗
26. Biodegradable implants in orthopaedic surgery—A review on the state-of-the-art10.1016/0267-6605(92)90088-B ↗
27. Polymeric biomaterials for medical implants and devices10.1021/acsbiomaterials.5b00429 ↗
28. Characteristics of biodegradable implants
29. Tissue response to partially in vitro predegraded poly(L-lactide) implants10.1016/j.biomaterials.2004.06.026 ↗
30. Comparison of titanium and biodegradable miniplates for fixation of mandibular fractures10.1016/j.joms.2009.08.004 ↗
31. Findrik Balogová, A., Trebuňová, M., Ižaríková, G., Kaščák, Ľ., Mitrík, L., Klímová, J., Feranc, J., Modrák, M., Hudák, R., and Živčák, J. (2021). In vitro degradation of specimens produced from PLA/PHB by additive manufacturing in simulated conditions. Polymers, 13.10.3390/polym13101542 ↗
32. Biodegradable fixation of mandibular fractures in children: Stability and early results10.1016/j.tripleo.2004.11.013 ↗
33. Clinical complications of biodegradable screws for ligament injuries10.1016/j.msec.2019.110423 ↗
34. Comparison of poly-L-lactic acid and poly-L-lactic acid/hydroxyapatite bioabsorbable screws for tibial fixation in ACL reconstruction: Clinical and magnetic resonance imaging results10.4055/cios.2017.9.3.270 ↗
35. Fixation of osteochondritis dissecans lesions using poly (l-lactic acid)/poly (glycolic acid) copolymer bioabsorbable screws10.1177/0363546504265927 ↗
36. Comparative in vitro study on pure metals (Fe, Mn, Mg, Zn and W) as biodegradable metals10.1016/j.jmst.2013.03.019 ↗
37. Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy10.1073/pnas.1518238113 ↗
38. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats10.1038/nm.4162 ↗
39. Porous magnesium/PLGA composite scaffolds for enhanced bone regeneration following tooth extraction10.1016/j.actbio.2014.09.008 ↗
40. Liu, Y., Du, T., Qiao, A., Mu, Y., and Yang, H. (2022). Zinc-Based Biodegradable Materials for Orthopaedic Internal Fixation. J. Funct. Biomater., 13.10.3390/jfb13040164 ↗
41. Biodegradable materials for bone defect repair
42. Biodegradable materials for bone repair and tissue engineering applications10.3390/ma8095273 ↗
43. Recent concepts in biodegradable polymers for tissue engineering paradigms: A critical review10.1080/09506608.2018.1460943 ↗
44. Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world10.1023/A:1021013921916 ↗
45. Synthetic biodegradable functional polymers for tissue engineering: A brief review10.1007/s11426-014-5086-y ↗
46. Tissue engineering: The design and fabrication of living replacement devices for surgical reconstruction and transplantation10.1016/S0140-6736(99)90247-7 ↗
47. Poly (Lactic Acid) nanofibres as drug delivery systems: Opportunities and challenges
48. Absorbable polymeric surgical sutures: Chemistry, production, properties, biodegradability, and performance10.1177/0885328210384890 ↗
49. Fabrication and characterization of permeable degradable poly(DL-lactide-co-glycolide) (PLGA) hollow fiber phase inversion membranes for use as nerve tract guidance channels10.1016/j.biomaterials.2006.02.036 ↗
50. Synthesis of novel polyesters for potential applications in skin tissue engineering10.1002/jctb.4638 ↗
51. Biodegradable polyurethanes: Biodegradable low adherence films for the prevention of adhesions after surgery10.1177/088532829601100203 ↗
52. Injectable in situ cross-linkable nanocomposites of biodegradable polymers and carbon nanostructures for bone tissue engineering10.1163/156856207781034133 ↗
53. Acidity near eroding polylactide-polyglycolide in vitro and in vivo in rabbit tibial bone chambers10.1016/S0142-9612(96)00075-0 ↗
54. Monolithic biocompatible and biodegradable scaffolds for tissue engineering10.1002/pola.23328 ↗
55. Synthetic biopolymer nanocomposites for tissue engineering scaffolds10.1016/j.progpolymsci.2013.06.001 ↗
56. Rohman, G. (2017). Biodegradable Polymers: Recent Developments and New Perspectives, IAPC Publishing.10.5599/obp.14.0 ↗
57. Rivera-Briso, A.L., and Serrano-Aroca, Á. (2018). Poly (3-Hydroxybutyrate-co-3-Hydroxyvalerate): Enhancement strategies for advanced applications. Polymers, 10.10.3390/polym10070732 ↗
58. Marine derived polysaccharides for biomedical applications: Chemical modification approaches10.3390/molecules13092069 ↗
59. Biocomposites containing natural polymers and hydroxyapatite for bone tissue engineering10.1016/j.ijbiomac.2010.03.015 ↗
60. Arseni, L., Lombardi, A., and Orioli, D. (2018). From structure to phenotype: Impact of collagen alterations on human health. Int. J. Mol. Sci., 19.10.3390/ijms19051407 ↗
61. Use of collagen as a biomaterial: An update10.4103/0972-124X.118333 ↗
62. Collagen based drug delivery systems: A review
63. Collagen–biomaterial for drug delivery10.1016/S0939-6411(98)00017-4 ↗
64. Selivanova, N.M., Galeeva, A.I., and Galyametdinov, Y.G. (2022). Chitosan/Lactic Acid Systems: Liquid Crystalline Behavior, Rheological Properties, and Riboflavin Release In Vitro. Int. J. Mol. Sci., 23.10.3390/ijms232113207 ↗
65. Synthesis and characterization of a novel chitosan-N-acetyl-homocysteine thiolactone polymer using MES buffer10.1016/j.carbpol.2014.03.078 ↗
66. Chitin, chitosan and derivatives for wound healing and tissue engineering
67. Recent advances in biomaterials as instructive scaffolds for stem cells in tissue repair and regeneration10.1080/00914037.2020.1848832 ↗
68. The role of natural polymers in bone tissue engineering10.1016/j.jconrel.2021.08.055 ↗
69. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.01.039 ↗
70. New generation poly(ε-caprolactone)/gel-derived bioactive glass composites for bone tissue engineering10.1016/j.msec.2015.06.020 ↗
71. pH-compensation effect of bioactive inorganic fillers on the degradation of PLGA10.1016/j.compscitech.2005.04.051 ↗
72. Boccaccini, A.R., Brauer, D.S., and Hupa, L. (2016). Bioactive Glasses: Fundamentals, Technology and Applications, Royal Society of Chemistry.10.1039/9781782622017 ↗
73. Premature degradation of poly(α-hydroxyesters) during thermal processing of Bioglass®-containing composites10.1016/j.actbio.2009.08.020 ↗
74. Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review10.1016/j.progpolymsci.2013.02.003 ↗
75. The extracellular matrix at a glance10.1242/jcs.023820 ↗
76. Applications of decellularized extracellular matrix in bone and cartilage tissue engineering10.1002/btm2.10110 ↗
77. Materials from mussel-inspired chemistry for cell and tissue engineering applications10.1021/acs.biomac.5b00852 ↗
78. Biology of bone tissue: Structure, function, and factors that influence bone cells
79. Nanofiber scaffolds based on extracellular matrík for articular cartilage engineering: A perspective10.7150/ntno.78611 ↗
80. Understanding magnesium corrosion—A framework for improved alloy performance10.1002/adem.200310405 ↗
81. Current research progress in grain refinement of cast magnesium alloys: A review article10.1016/j.jallcom.2014.09.061 ↗
82. Mathaudhu, S., Luo, A., Neelameggham, N., Nyberg, E., and Sillekens, W. (2016). Essential Readings in Magnesium Technology, Springer.10.1007/978-3-319-48099-2 ↗
83. Improving mechanical properties and corrosion resistance of Mg 6Zn Mn magnesium alloy by rapid solidification10.1016/j.matlet.2012.10.051 ↗
84. Formation of profuse long period stacking ordered microcells in Mg–Gd–Zn–Zr alloy during multipass ECAP process10.1016/j.jallcom.2014.02.175 ↗
85. The microstructure and properties of cyclic extrusion compression treated Mg–Zn–Y–Nd alloy for vascular stent application10.1016/j.jmbbm.2011.12.011 ↗
86. Calcium orthophosphate coatings on magnesium and its biodegradable alloys10.1016/j.actbio.2014.02.026 ↗
87. Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants10.1088/1468-6996/16/5/053501 ↗
88. Hermawan, H. (2012). Biodegradable Metals—From Concept to Applications, Springer.10.1007/978-3-642-31170-3 ↗
89. Assessing the biocompatibility of degradable metallic materials: State-of-the-art and focus on the potential of genetic regulation10.1016/j.actbio.2010.02.027 ↗
90. Recent advancements in Fe-based biodegradable materials for bone repair10.1007/s10853-018-3011-z ↗
91. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
92. Zinc: Biochemistry, physiology, toxicology and clinical pathology
93. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
94. Progress of biodegradable metals10.1016/j.pnsc.2014.08.014 ↗
95. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
96. Bioceramics in the realm of history10.4172/2090-5025.1000e106 ↗
97. Aslankoohi, N., Mondal, D., Rizkalla, A.S., and Mequanint, K. (2019). Bone repair and regenerative biomaterials: Towards recapitulating the microenvironment. Polymers, 11.10.3390/polym11091437 ↗
98. The role of calcium phosphate surface structure in osteogenesis and the mechanisms involved10.1016/j.actbio.2019.12.034 ↗
99. Hench, L.L., and Best, S.M. (2013). Biomaterials Science, Elsevier.
100. The response of bone to nanocrystalline hydroxyapatite-coated Ti13Nb11Zr alloy in an animal model10.1016/j.biomaterials.2007.12.011 ↗