journal article·2023-08-17Open access

Clinical Applications and Mechanical Properties of CAD-CAM Materials in Restorative and Prosthetic Dentistry: A Systematic Review

Imena Rexhepi, Manlio Santilli, Gianmaria D’Addazio, Giuseppe Tafuri, Eugenio Manciocchi, Sergio Caputi, Bruna Sinjari

Abstract

Clinical outcomes of dental restorations depend primarily on the choice of materials used, and nowadays, dental CAD-CAM (Computer-Aided Design Computer-Aided Manufacturing) materials have strongly changed daily clinical practice. The aim of this systematic review is to analyze CAD-CAM dental materials according to their mechanical properties and in relation to their clinical applications. A literature review was performed on PubMed, Scopus, Web of Knowledge, and the Cochrane Library. Articles addressing at least one of the following topics regarding dental materials for CAD-CAM systems: manufacturers, mechanical features, materials’ composition, optical properties, clinical indications, and/or outcomes were included in the review. A flowchart was performed as described in the PRISMA guidelines. Among the 564 articles found, 63 were analyzed and evaluated. Within the limitations of this systematic review, it can be concluded that CAD-CAM materials present a wide range of clinical applications due to their improved mechanical properties. Specifically, in addition to materials that have been in use for a long time (such as feldspathic ceramics), resin block composites can also be used for permanent restorations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Diverse Academic Research Areas · Environmental and Air Quality Management · Statistical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Unit of Prosthodontics, Department of Innovative Technologies in Medicine and Dentistry, University “G. d’Annunzio” Chieti-Pescara, 66100 Chieti, Italy

Electron Microscopy Laboratory, University “G. d’Annunzio” Chieti-Pescara, 66100 Chieti, Italy

References (82)

Show source-provided references
1. Barenghi, L., Barenghi, A., Garagiola, U., Di Blasio, A., Giannì, A.B., and Spadari, F. (2021). Pros and Cons of CAD/CAM Technology for Infection Prevention in Dental Settings during COVID-19 Outbreak. Sensors, 22.10.3390/s22010049 ↗
2. Longhi, S., Monteriù, A., Freddi, A., Aquilanti, L., Ceravolo, M.G., Carnevali, O., Giordano, M., and Moroncini, G. (2020). The First Out-Standing 50 Years of “Università Politecnica Delle Marche”: Research Achievements in Life Sciences, Springer International Publishing.10.1007/978-3-030-33832-9 ↗
3. Understanding Dental CAD/CAM for Restorations–the Digital Workflow from a Mechanical Engineering Viewpoint
4. We’re Going Digital: The Current State of CAD/CAM Dentistry in Prosthodontics10.1177/205016841800700205 ↗
5. Ceramic Dental Biomaterials and CAD/CAM Technology: State of the Art10.1016/j.jpor.2014.07.003 ↗
6. Marginal Adaptation and CAD-CAM Technology: A Systematic Review of Restorative Material and Fabrication Techniques10.1016/j.prosdent.2017.07.001 ↗
7. A Review of Dental CAD/CAM: Current Status and Future Perspectives from 20 Years of Experience10.4012/dmj.28.44 ↗
8. Case Series Clinical Results from a Long-Term Case Series Using Chairside CEREC CAD-CAM Inlays and Onlays
9. Advancements in CAD/CAM Technology: Options for Practical Implementation10.1016/j.jpor.2016.01.003 ↗
10. Clinical Performance of CAD-CAM-Fabricated Complete Dentures: A Cross-Sectional Study10.1016/j.prosdent.2016.03.017 ↗
11. Comparison of the Accuracy of Direct and Indirect Three-Dimensional Digitizing Processes for CAD/CAM Systems—An In Vitro Study10.1016/j.jpor.2016.07.001 ↗
12. Resin Composite Materials for Chairside CAD/CAM Restorations: A Comparison of Selected Mechanical Properties10.1155/2021/8828954 ↗
13. Contemporary CAD/CAM Materials in Dentistry10.1007/s40496-019-00236-3 ↗
14. Materials in Digital Dentistry—A Review10.1111/jerd.12566 ↗
15. Digital Dentistry: An Overview of Recent Developments for CAD/CAM Generated Restorations10.1038/sj.bdj.2008.350 ↗
16. Dental Biomaterials for Chairside CAD/CAM: State of the Art10.4047/jap.2017.9.6.486 ↗
17. The PRISMA Statement for Reporting Systematic Reviews and Meta-Analyses of Studies That Evaluate Healthcare Interventions: Explanation and Elaboration10.1136/bmj.b2700 ↗
18. Automatic Evidence Retrieval for Systematic Reviews10.2196/jmir.3369 ↗
19. Skorulska, A., Piszko, P., Rybak, Z., Szymonowicz, M., and Dobrzyński, M. (2021). Review on Polymer, Ceramic and Composite Materials for CAD/CAM Indirect Restorations in Dentistry—Application, Mechanical Characteristics and Comparison. Materials, 14.10.3390/ma14071592 ↗
20. Novel Zirconia Materials in Dentistry10.1177/0022034517737483 ↗
21. A New Classification System for All-Ceramic and Ceramic-Like Restorative Materials10.11607/ijp.4244 ↗
22. Ahmed, H. (2019). Craig’s Restorative Dental Materials, Elsevier. [14th ed.].10.1038/sj.bdj.2019.29 ↗
23. Avram, L.T., Galațanu, S.V., Opriș, C., Pop, C., and Jivănescu, A. (2022). Effect of Different Etching Times with Hydrofluoric Acid on the Bond Strength of CAD/CAM Ceramic Material. Materials, 15.10.3390/ma15207071 ↗
24. Effect of Hydrofluoric Acid Concentration and Etching Time on Resin-Bond Strength to Different Glass Ceramics10.1590/1807-3107bor-2019.vol33.0041 ↗
25. Hinz, S., Bensel, T., Bömicke, W., Henningsen, A., Rudolph, J., and Boeckler, A.F. (2022). Impact of the Veneering Technique and Framework Material on the Failure Loads of All-Ceramic Computer-Aided Design/Computer-Aided Manufacturing Fixed Partial Dentures. Materials, 15.10.3390/ma15030756 ↗
26. D’Addazio, G., Santilli, M., Rollo, M.L., Cardelli, P., Rexhepi, I., Murmura, G., Al-Haj Husain, N., Sinjari, B., Traini, T., and Özcan, M. (2020). Fracture Resistance of Zirconia-Reinforced Lithium Silicate Ceramic Crowns Cemented with Conventional or Adhesive Systems: An In Vitro Study. Materials, 13.10.3390/ma13092012 ↗
27. Lithium Disilicate and Zirconia Reinforced Lithium Silicate Glass-Ceramics for CAD/CAM Dental Restorations: Biocompatibility, Mechanical and Microstructural Properties after Crystallization10.1016/j.jdent.2022.104054 ↗
28. Flexural Resistance of Heat-Pressed and CAD-CAM Lithium Disilicate with Different Translucencies
29. Translucent Zirconium Dioxide and Lithium Disilicate: A 3-Year Follow-up of a Prospective, Practice-Based Randomized Controlled Trial on Posterior Monolithic Crowns10.11607/ijp.6795 ↗
30. Fracture Toughness and Hardness of a Y-TZP Dental Ceramic after Mechanical Surface Treatments10.1007/s00784-013-1018-z ↗
31. Wen, C. (2021). Woodhead Publishing Series in Biomaterials, Structural Biomaterials, Woodhead Publishing.
32. Black, J., and Hastings, G. (1998). Handbook of Biomaterial Properties, Springer.10.1007/978-1-4615-5801-9 ↗
33. Strength, Fracture Toughness, and Microstructure of a Selection of All-Ceramic Materials. Part II. Zirconia-Based Dental Ceram-Ics10.1016/j.dental.2003.05.002 ↗
34. Clinical Evaluation of Tooth-Supported Zirconia-Based Fixed Dental Prostheses: A Retrospective Cohort Study from the AIOP Clinical Research Group10.11607/ijp.4023 ↗
35. Outcome of Zirconia Partial Fixed Dental Prostheses Made by Predoctoral Dental Students: A Clinical Retrospective Study after 3 to 7 Years of Clinical Service10.1016/j.prosdent.2015.10.026 ↗
36. Time-Efficiency and Cost-Analysis Comparing Three Digital Workflows for Treatment with Monolithic Zirconia Implant Fixed Dental Prostheses: A Double-Blinded RCT10.1016/j.jdent.2021.103779 ↗
37. Monitoring Fatigue Damage in Different CAD/CAM Materials: A New Approach with Optical Coherence Tomography10.2186/jpr.JPOR_2019_466 ↗
38. A Retrospective Survey on Long-Term Survival of Posterior Zirconia and Porcelain-Fused-to-Metal Crowns in Private Practice
39. Long-Term Performance of Posterior InCeram Alumina Crowns Cemented with Different Luting Agents: A Prospective, Random-Ized Clinical Split-Mouth Study over 5 Years10.1007/s00784-013-1137-6 ↗
40. Kawajiri, Y., Ikeda, H., Nagamatsu, Y., Masaki, C., Hosokawa, R., and Shimizu, H. (2021). PICN Nanocomposite as Dental CAD/CAM Block Comparable to Human Tooth in Terms of Hardness and Flexural Modu-Lus. Materials, 14.10.3390/ma14051182 ↗
41. Effect of Resin Composition on Performance of Polymer-Infiltrated Feldsparnetwork Composites for Dental Restoration10.4012/dmj.2019-180 ↗
42. Multichromatic and Highly Translucent Hybrid Ceramic Vita Enamic
43. Correlation between Microstructure of CAD/CAM Composites and the Silanization Effect on Adhesive Bonding10.1016/j.jmbbm.2019.103441 ↗
44. Fabrication of Enamel-Like Structure on Polymer-Infiltrated Zirconia Ceramics10.1016/j.dental.2021.01.002 ↗
45. Resin Nanoceramic CAD/CAM Restoration of the Primary Molar: 3-Year Follow-Up Study
46. Fatigue Resistance of Ultrathin CAD/CAM Ceramic and Nanoceramic Composite Occlusal Veneers10.1016/j.dental.2019.07.006 ↗
47. In Vitro Evaluation of Translucency and Color Stability of CAD/CAM Polymer-Infiltrated Ceramic Materials after Accelerated Aging10.1111/jopr.13239 ↗
48. Effect of Aging Regimens on Resin Nanoceramic Chairside CAD/CAM Material10.1111/jopr.12408 ↗
49. Comparative Evaluation of the Mechanical Properties of CAD/CAM Dental Blocks10.1007/s10266-018-0407-9 ↗
50. Wear Resistance and Abrasiveness of CAD-CAM Monolithic Materials10.1016/j.prosdent.2018.05.011 ↗
51. Discoloration of Various CAD/CAM Blocks after Immersion in Coffee10.5395/rde.2017.42.1.9 ↗
52. The Effect of Surface Treatments on the Mechanical and Optical Behaviors of CAD/CAM Restorative Materials10.1111/jopr.12749 ↗
53. Zafar, M.S. (2020). Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update. Polymers, 12.10.3390/polym12102299 ↗
54. Hassan, M., Asghar, M., Din, S.U., and Zafar, M.S. (2019). Thermoset Polymethacrylate-Based Materials for Dental Applications, Elsevier.10.1016/B978-0-12-816874-5.00008-6 ↗
55. Evaluation of Flexural Strength and Surface Properties of Pre-polymerized CAD/CAM PMMA-Based Polymers Used for Digital 3D Complete Dentures
56. A comparison of the flexural and impact strengths and flexural modulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (PMMA)
57. A Comparison of the Surface Properties of CAD/CAM and Conventional Polymethylmethacrylate (PMMA)10.1111/jopr.13033 ↗
58. Computer-Aided Technology for Fabricating Complete Dentures: Systematic Review of Historical Background, Current Status, and Future Perspectives10.1016/S0022-3913(13)60318-2 ↗
59. Bond Strength of Denture Teeth to Heat-Cured, CAD/CAM and 3D Printed Denture Acrylics10.1111/jopr.13125 ↗
60. CAD-CAM Milled versus Rapidly Prototyped (3D-Printed) Complete Dentures: An In Vitro Evaluation of Trueness10.1016/j.prosdent.2018.09.001 ↗
61. Mechanical Properties of Polymethyl Methacrylate as a Denture Base: Conventional versus CAD-CAM Resin—A Systematic Review and Meta-Analysis of In Vitro Studies
62. In Vitro Evaluation of Adhesion of Candida Albicans on CAD/CAM PMMA-Based Polymers10.1111/jopr.12942 ↗
63. Papathanasiou, I., Kamposiora, P., Papavasiliou, G., and Ferrari, M. (2020). The Use of PEEK in Digital Prosthodontics: A Narrative Review. BMC Oral Health, 20.10.1186/s12903-020-01202-7 ↗
64. PEEK High Performance Polymers: A Review of Properties and Clinical Applications in Prosthodontics and Restorative Dentis-Try
65. Effects of Novel Polyetheretherketone (PEEK) Clasp Design on Retentive Force at Different Tooth Undercuts
66. Finite Element Analysis and Optimization of the Mechanical Properties of Polyetheretherketone (PEEK) Clasps for Removable Partial Dentures10.1016/j.jpor.2019.07.012 ↗
67. Virtual Evaluation of the Accuracy of Fit and Trueness in Maxillary Poly (Etheretherketone) Removable Partial Denture Frame-Works Fabricated by Direct and Indirect CAD/CAM Techniques10.1111/jopr.13075 ↗
68. Applications of Polyetheretherketone (PEEK) in Oral Implantology and Prosthodontics10.1016/j.jpor.2015.10.001 ↗
69. Polyetheretherketone versus Titanium CAD-CAM Framework for Implant-Supported Fixed Complete Dentures: A Retrospective Study with Up to 5-Year Follow-Up10.2186/jpr.JPR_D_20_00142 ↗
70. Accuracy of CAD-CAM-Fabricated Removable Partial Dentures10.1016/j.prosdent.2017.04.017 ↗
71. Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties10.1155/2018/4893143 ↗
72. Long-Term Hydrolytic Stability of CAD/CAM Composite Blocks10.1111/eos.12834 ↗
73. Effect of Monomer Type on the CC Degree of Conversion, Water Sorption and Solubility, and Color Stability of Model Dental Composites10.1016/j.dental.2017.01.010 ↗
74. Marchesi, G., Camurri Piloni, A., Nicolin, V., Turco, G., and Di Lenarda, R. (2021). Chairside CAD/CAM Materials: Current Trends of Clinical Uses. Biology, 10.10.3390/biology10111170 ↗
75. Physico Mechanical Characterization of Polyetheretherketone and Current Esthetic Dental CAD/CAM Polymers after Aging in Different Storage Media10.1016/j.prosdent.2015.09.004 ↗
76. How Can Different Polishing Timing Influence Methacrylate and Dimethacrylate Bulk Fill Composites? Evaluation of Chemical and Physical Properties10.1155/2020/1965818 ↗
77. Stain Susceptibility of Composite and Ceramic CAD/CAM Blocks versus Direct Resin Composites with Different Resinous Matrices10.1007/s10266-016-0258-1 ↗
78. Influence of Different Luting Systems on Microleakage of CAD/CAM Composite Crowns: A Pilot Study10.11607/ijp.6210 ↗
79. Flexural Resistance of CAD-CAM Blocks. Part 3: Polymer-Based Restorative Materials for Permanent Restorations
80. Mechanical Degradation of Contemporary CAD/CAM Resin Composite Materials after Water Ageing
81. Paolone, G., Mandurino, M., De Palma, F., Mazzitelli, C., Scotti, N., Breschi, L., Gherlone, E., Cantatore, G., and Vichi, A. (2023). Color Stability of Polymer-Based Composite CAD/CAM Blocks: A Systematic Review. Polymers, 15.10.3390/polym15020464 ↗
82. Vichi, A., Balestra, D., Scotti, N., Louca, C., and Paolone, G. (2023). Translucency of CAD/CAM, and 3D Printable Composite Materials for Permanent Dental Restorations. Polymers, 15.10.3390/polym15061443 ↗