journal article·2022-11-30Open access

Performance of PEO/Polymer Coatings on the Biodegradability, Antibacterial Effect and Biocompatibility of Mg-Based Materials

Arash Fattah-alhosseini, Razieh Chaharmahali, Armin Rajabi, Kazem Babaei, Mosab Kaseem

Abstract

Magnesium (Mg) alloys have recently attracted attention in biomedicine as biodegradable materials with non-toxic degradable products. Such compounds have become a frontier in the study of biodegradable materials because of their remarkable biomechanical compatibility and superior biocompatibility. The use of Mg-based implants reduces the negative consequences of permanent biological implants by eliminating the necessity for biomaterial surgery following the healing process. However, the quick deterioration, formation of considerable gas of hydrogen volumes and a rise in the body environment pH are obstacles in the application of Mg as an implant material. Hence, compelling advances for erosion resistance and biocompatibility of magnesium and its alloys are noteworthy. Surface modification may be a practical approach because it improves the erosion resistance compared with extensive preparation of a treated surface for progressed bone recovery and cell attachment. Coating produced by plasma electrolytic oxidation (PEO) seems a compelling method in order to enhance magnesium and the properties of its alloys. PEO-formed coatings cannot provide long-term protection in the physiological environment due to their porous nature. Thus, a polymer coating is applied on the porous PEO-formed coating, which is steadily applied on the surface. Polymer coatings improve the biocompatibility properties of Mg and its alloys and increase corrosion resistance. In this article, the most recent advancements in PEO/polymer composite coatings are reviewed, and the biocompatibility of such coatings is examined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering, Bu-Ali Sina University, Hamedan 65178-38695, Iran

Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Malaysia

Department of Nanotechnology and Advanced Materials Engineering, Sejong University, Seoul 05006, Republic of Korea

Funding

National Research Foundation of Korea (NRF)

References (100+)

Show source-provided references
1. Ghosh, S., Sanghavi, S., and Sancheti, P. (2018). Metallic biomaterial for bone support and replacement. Fundamental Biomaterials: Metals, Elsevier.10.1016/B978-0-08-102205-4.00006-4 ↗
2. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
3. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗
4. Peterson, D.R., and Bronzino, J.D. (2007). Biomechanics, CRC Press.10.1201/9781420008197 ↗
5. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives
6. A review of effective strides in amelioration of the biocompatibility of PEO coatings on Mg alloys10.1016/j.jma.2022.09.002 ↗
7. Lane, J.M., Mait, J.E., Unnanuntana, A., Hirsch, B.P., Shaffer, A.D., and Shonuga, O.A. (2011). Materials in Fracture Fixation. Comprehensive Biomaterials, Elsevier.10.1016/B978-0-08-055294-1.00251-8 ↗
8. Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications10.1016/j.msec.2016.06.020 ↗
9. Mg bone implant: Features, developments and perspectives10.1016/j.matdes.2019.108259 ↗
10. Magnesium-based biomaterials as emerging agents for bone repair and regeneration: From mechanism to application10.1016/j.jma.2021.03.004 ↗
11. Magnesium and its alloys as orthopedic biomaterials: A review10.1016/j.biomaterials.2005.10.003 ↗
12. In vitro and in vivo comparison of binary Mg alloys and pure Mg10.1016/j.msec.2015.12.064 ↗
13. Biodegradable Mg corrosion and osteoblast cell culture studies10.1016/j.msec.2009.02.008 ↗
14. Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., and Berzina-Cimdina, L. (2017). Biodegradable materials and metallic implants-A review. J. Funct. Biomater., 8.10.3390/jfb8040044 ↗
15. Implant biomaterials: A comprehensive review10.12998/wjcc.v3.i1.52 ↗
16. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
17. The in vivo degradation and bone-implant interface of Mg-Nd-Zn-Zr alloy screws: 18 months post-operation results
18. Matsushita, T., and Takahashi, H. (2019). Orthopedic Applications of Metallic Biomaterials. Elsevier Ltd.. [2nd ed.].10.1016/B978-0-08-102666-3.00017-1 ↗
19. Improving the electrochemical stability of AZ31 Mg alloy in a 3.5wt.% NaCl solution via the surface functionalization of plasma electrolytic oxidation coating10.1016/j.jma.2021.08.028 ↗
20. Morphological modification and corrosion response of MgO and Mg3(PO4)2 composite formed on magnesium alloy10.1016/j.compositesb.2019.107225 ↗
21. Surface & Coatings Technology Bioactive plasma electrolytic oxidation coatings on Mg-Ca alloy to control degradation behaviour10.1016/j.surfcoat.2017.02.050 ↗
22. Acta Biomaterialia Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates ? A review10.1016/j.actbio.2014.11.048 ↗
23. Corrosion performance of MAO coatings on AZ31 Mg alloy in simulated body fluid vs. Earle’s Balance Salt Solution10.1016/j.apsusc.2015.12.026 ↗
24. Enhancing corrosion and wear performance of PEO coatings on Mg alloys using graphene and graphene oxide additions: A review10.1016/j.flatc.2021.100241 ↗
25. Review of the atmospheric corrosion of magnesium alloys10.1016/j.jmst.2019.05.001 ↗
26. Recent progress in corrosion protection of magnesium alloys by organic coatings10.1016/j.porgcoat.2011.10.011 ↗
27. Biodegradable magnesium–hydroxyapatite metal matrix composites10.1016/j.biomaterials.2006.12.027 ↗
28. Chen, X.-B., Easton, M.A., Birbilis, N., Yang, H.-Y., and Abbott, T.B. (2013). Corrosion-resistant electrochemical plating of magnesium (Mg) alloys. Corrosion Prevention of Magnesium Alloys, Elsevier.10.1533/9780857098962.3.315 ↗
29. Protective coatings on magnesium and its alloys—A critical review10.1016/S0925-8388(01)01899-0 ↗
30. Surface modification of biodegradable magnesium and its alloys for biomedical applications10.1093/rb/rbu013 ↗
31. Electroless nickel fabrication on surface modified magnesium substrates10.1016/j.dt.2019.04.006 ↗
32. Electroless nickel-plating on AZ91D magnesium alloy: Effect of substrate microstructure and plating parameters10.1016/S0257-8972(03)00866-1 ↗
33. Progress of electroplating and electroless plating on magnesium alloy10.1016/S1003-6326(10)60552-3 ↗
34. Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys10.1016/j.corsci.2004.06.016 ↗
35. Organic conversion coatings for magnesium and its alloys10.1016/j.jiec.2019.03.018 ↗
36. Optimization of PVD process parameter for coating AZ91D magnesium alloy by Taguchi grey approach10.1016/j.jma.2018.02.004 ↗
37. Low temperature thermal oxidation towards hafnium-coated magnesium alloy for biomedical application10.1016/j.matlet.2017.01.009 ↗
38. Prediction and optimization of process variables to maximize the Young’s modulus of plasma sprayed alumina coatings on AZ31B magnesium alloy10.1016/j.jma.2017.02.002 ↗
39. Formation mechanism and corrosion resistance of the hydrophobic coating on anodized magnesium10.1016/j.corsci.2016.05.023 ↗
40. Characterization of interfacial layers grown between magnesium substrates and SiO films deposited by plasma-enhanced CVD10.1016/j.surfcoat.2017.07.088 ↗
41. Investigation of Anti-Corrosive Performance of a Si-Doped DLC-Coated Magnesium Alloy Stent Deposited by RF-Plasma CVD10.2494/photopolymer.32.511 ↗
42. Active protection of Mg alloy by composite PEO coating loaded with corrosion inhibitors10.1016/j.apsusc.2019.144462 ↗
43. Increasing the in-vitro corrosion resistance of AZ31B-Mg alloy via coating with hydroxyapatite using plasma electrolytic oxidation10.1080/21870764.2019.1698143 ↗
44. Enhanced mechanical properties and increased corrosion resistance of a biodegradable magnesium alloy by plasma electrolytic oxidation (PEO)10.1016/j.mseb.2016.02.005 ↗
45. Corrosion and wettability of PEO coatings on magnesium by addition of potassium stearate10.1016/j.jma.2017.06.002 ↗
46. The effect of in-situ reactive incorporation of MoOx on the corrosion behavior of Ti-6Al-4 V alloy coated via micro-arc oxidation coating10.1016/j.corsci.2021.109764 ↗
47. Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties10.1016/j.jallcom.2019.04.080 ↗
48. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.jma.2020.07.004 ↗
49. Anionic assisted incorporation of WO3 nanoparticles for enhanced electrochemical properties of AZ31 Mg alloy coated via plasma electrolytic oxidation10.1016/j.jallcom.2022.165445 ↗
50. Superior corrosion protection and adhesion strength of epoxy coating applied on AZ31 magnesium alloy pre-treated by PEO/Silane with inorganic and organic corrosion inhibitors10.1016/j.corsci.2020.109065 ↗
51. Improving surface characteristics of PEO coatings of Mg and its alloys with zirconia nanoparticles: A review10.1016/j.apsadv.2021.100131 ↗
52. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges10.1016/j.pmatsci.2013.08.002 ↗
53. Corrosion behavior of HA containing ceramic coated magnesium alloy in Hank ’ s solution10.1016/j.jallcom.2016.12.168 ↗
54. Magnesium Properties-applications-potential10.1016/S0921-5093(00)01351-4 ↗
55. Acta Biomaterialia Biomedical coatings on magnesium alloys—A review10.1016/j.actbio.2012.04.012 ↗
56. A novel hybrid composite composed of albumin, WO3, and LDHs film for smart corrosion protection of Mg alloy10.1016/j.compositesb.2020.108490 ↗
57. Plasma anodized ZE41 magnesium alloy sealed with hybrid epoxy-silane coating10.1016/j.corsci.2013.04.019 ↗
58. Effect of different post-treatments on the corrosion resistance and tribological properties of AZ91D magnesium alloy coated PEO10.1016/j.surfcoat.2015.07.017 ↗
59. Assessment of duplex coating combining plasma electrolytic oxidation and polymer layer on AZ31 magnesium alloy10.1016/j.surfcoat.2012.05.091 ↗
60. Improvement of corrosion resistance of pure magnesium in Hanks’ solution by microarc oxidation with sol–gel TiO2 sealing10.1016/j.jallcom.2008.01.102 ↗
61. Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys10.1016/j.surfcoat.2010.08.022 ↗
62. Complex anticorrosion coating for ZK30 magnesium alloy10.1016/j.electacta.2009.08.018 ↗
63. Composite coatings on a Mg–Li alloy prepared by combined plasma electrolytic oxidation and sol–gel techniques10.1016/j.corsci.2012.06.018 ↗
64. Impressive strides in amelioration of corrosion and wear behaviors of Mg alloys using applied polymer coatings on PEO porous coatings: A review10.1016/j.jma.2022.01.015 ↗
65. Organo-silane coatings for AZ31 magnesium alloy corrosion protection10.1016/j.matchemphys.2008.02.015 ↗
66. Selecting medium for corrosion testing of bioabsorbable magnesium and other metals—A critical review10.1016/j.corsci.2020.108722 ↗
67. In vitro and in vivo studies on biodegradable magnesium alloy10.1016/j.pnsc.2014.09.002 ↗
68. Microstructural, mechanical and corrosion characterization of an as-cast Mg–3Zn–0.4Ca alloy for biomedical applications10.1016/j.jma.2020.02.007 ↗
69. HA coating on Mg alloys for biomedical applications: A review10.1016/j.jma.2020.05.003 ↗
70. Surface modification and cytotoxicity of Mg-based bio-alloys: An overview of recent advances10.1016/j.jallcom.2020.154140 ↗
71. Mechanical aspects of dental implants and osseointegration: A narrative review10.1016/j.jmbbm.2019.103574 ↗
72. Investigation of the mechanical and degradation properties of Mg–Sr and Mg–Zn–Sr alloys for use as potential biodegradable implant materials10.1016/j.jmbbm.2011.07.018 ↗
73. Liu, L., Yu, H., Yang, W., and Wang, Z. (2019). Inhibition of grain growth by a Ce-rich precipitate during the annealing of spray-casted magnesium alloy. Materials, 12.10.3390/ma12050742 ↗
74. Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process10.1016/j.matchemphys.2019.01.007 ↗
75. Biodegradable magnesium-based biomaterials: An overview of challenges and opportunities10.1002/mco2.59 ↗
76. Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy10.1016/S0257-8972(01)01671-1 ↗
77. Effects of electrical parameters and their interactions on plasma electrolytic oxidation coatings on aluminum substrates10.1016/S1003-6326(20)65262-1 ↗
78. Effect of Graphene on Micro-Structure and Properties of MAO Coating Prepared on Mg-Li Alloy10.20964/2017.07.59 ↗
79. Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface10.1016/j.actbio.2016.09.005 ↗
80. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: A review10.1016/j.jma.2020.05.001 ↗
81. Duty cycle influence on the corrosion behavior of coatings created by plasma electrolytic oxidation on AZ31B magnesium alloy in simulated body fluid10.1016/j.corcom.2021.09.005 ↗
82. Attarzadeh, N., and Ramana, C.V. (2021). Plasma Electrolytic Oxidation Ceramic Coatings on Zirconium (Zr) and ZrAlloys: Part I—Growth Mechanisms, Microstructure, and Chemical Composition. Coatings, 11.10.3390/coatings11060634 ↗
83. Attarzadeh, N., and Ramana, C.V. (2021). Plasma Electrolytic Oxidation Ceramic Coatings on Zirconium (Zr) and Zr-Alloys: Part-II: Properties and Applications. Coatings, 11.10.3390/coatings11060620 ↗
84. Surface characterization of bioceramic coatings on Zr and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.surfin.2021.101283 ↗
85. Plasma electrolytic oxidation ( PEO ) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys10.1179/174591908X372482 ↗
86. Sodium Aluminate Concentration Effects on Microstructure and Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on Pure Titanium10.1007/s11661-017-4405-2 ↗
87. Zehra, T., Kaseem, M., Hossain, S., and Ko, Y.-G. (2021). Fabrication of a Protective Hybrid Coating Composed of TiO2, MoO2, and SiO2 by Plasma Electrolytic Oxidation of Titanium. Metals, 11.10.3390/met11081182 ↗
88. Impressive strides in antibacterial performance amelioration of Ti-based implants via plasma electrolytic oxidation (PEO): A review of the recent advancements10.1016/j.cej.2022.136003 ↗
89. A review on plasma electrolytic oxidation (PEO) of niobium: Mechanism, properties and applications10.1016/j.surfin.2020.100719 ↗
90. Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
91. Corrosion properties of plasma electrolytic oxidation coatings on an aluminium alloy—The effect of the PEO process stage10.1016/j.matchemphys.2015.04.058 ↗
92. Triggering the hydroxyapatite deposition on the surface of PEO-coated Ti–6Al–4V alloy via the dual incorporation of Zn and Mg ions10.1016/j.jallcom.2019.153038 ↗
93. Effect of current density on the microstructure and corrosion properties of plasma electrolytic oxidation (PEO) coatings on AM50 Mg alloy produced in an electrolyte containing clay additives10.1016/j.surfcoat.2016.01.033 ↗
94. Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior10.1016/j.surfcoat.2013.03.041 ↗
95. Effects of Duty Cycle, Current Frequency, and Current Density on Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy in Artificial Seawater10.1007/s11661-017-4205-8 ↗
96. Effect of KOH concentration on the electrochemical behavior of coatings formed by pulsed DC micro-arc oxidation (MAO) on AZ31B Mg alloy10.1016/j.jallcom.2015.11.169 ↗
97. Corrosion resistance of plasma-anodized AZ91D magnesium alloy by electrochemical methods10.1016/j.electacta.2007.04.030 ↗
98. Corrosion behavior of Al-1wt% Mg-0.85wt%Si alloy coated by micro-arc-oxidation using TiO2 and Na2MoO4 additives: Role of current density10.1016/j.jallcom.2017.06.275 ↗
99. Microarc oxidation of light constructional alloys: Part 1. Main notions on the microarc oxidation of light constructional alloys10.3103/S1067821213040135 ↗
100. Micro and nano-enabled approaches to improve the performance of plasma electrolytic oxidation coated magnesium alloys10.1016/j.jma.2020.11.004 ↗