journal article·2021-12-08Open access

Polylactic Acid Piezo-Biopolymers: Chemistry, Structural Evolution, Fabrication Methods, and Tissue Engineering Applications

Amirhossein Farahani, Abbas Zarei-Hanzaki, Hamid Reza Abedi, Lobat Tayebi, Ebrahim Mostafavi

Abstract

Polylactide acid (PLA), as an FDA-approved biomaterial, has been widely applied due to its unique merits, such as its biocompatibility, biodegradability, and piezoelectricity. Numerous utilizations, including sensors, actuators, and bio-application—its most exciting application to promote cell migration, differentiation, growth, and protein–surface interaction—originate from the piezoelectricity effect. Since PLA exhibits piezoelectricity in both crystalline structure and an amorphous state, it is crucial to study it closely to understand the source of such a phenomenon. In this respect, in the current study, we first reviewed the methods promoting piezoelectricity. The present work is a comprehensive review that was conducted to promote the low piezoelectric constant of PLA in numerous procedures. In this respect, its chemistry and structural origins have been explored in detail. Combining any other variables to induce a specific application or to improve any PLA barriers, namely, its hydrophobicity, poor electrical conductivity, or the tuning of its mechanical properties, especially in the application of cardiovascular tissue engineering, is also discussed wherever relevant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hot Deformation & Thermomechanical Processing Laboratory of High Performance Engineering Materials, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran 11155-4563, Iran

School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST), Tehran 16846-13114, Iran

School of Dentistry, Marquette University, Milwaukee, WI 53233, USA

Stanford Cardiovascular Institute, Stanford University School of Medicine, Stanford, CA 94305, USA

Department of Medicine, Stanford University School of Medicine, Stanford, CA 94305, USA

References (100+)

Show source-provided references
1. Electrospinning polyl-lactic acid piezoelectric ordered porous nanofibers for strain sensing and energy harvesting10.1007/s10854-017-7020-5 ↗
2. Comparison of electroactive polymers for energy scavenging applications10.1088/0964-1726/19/8/085012 ↗
3. Recent advances in kartogenin for cartilage regeneration10.1080/1061186X.2018.1464011 ↗
4. Microfracture for Treatment of Knee Cartilage Defects in Children and Adolescents10.4081/pr.2012.e21 ↗
5. Cryogenic 3D printing of heterogeneous scaffolds with gradient mechanical strengths and spatial delivery of osteogenic peptide/{TGF}-β1 for osteochondral tissue regeneration10.1088/1758-5090/ab7ab5 ↗
6. Three-Dimensional Porous Scaffolds with Biomimetic Microarchitecture and Bioactivity for Cartilage Tissue Engineering10.1021/acsami.9b12206 ↗
7. Solution viscosity regulates chondrocyte proliferation and phenotype during 3D culture10.1039/C9TB02204J ↗
8. Polylactic-co-glycolic acid-based composite bone-substitute materials
9. Cell-based tissue engineering strategies used in the clinical repair of articular cartilage10.1016/j.biomaterials.2016.04.018 ↗
10. Preparation of PLGA-collagen hybrid scaffolds with controlled pore structures for cartilage tissue engineering10.1016/j.pnsc.2020.07.003 ↗
11. Progress and problems in the application of focused ultrasound for blood–brain barrier disruption10.1016/j.ultras.2008.04.004 ↗
12. Glycated hemoglobin-detection methods based on electrochemical biosensors10.1016/j.trac.2015.03.019 ↗
13. Comparative analysis of fiber alignment methods in electrospinning10.1016/j.matt.2020.12.022 ↗
14. Chitosan-BaTiO3 nanostructured piezopolymer for tissue engineering10.1016/j.colsurfb.2020.111296 ↗
15. Ionic-Liquid-Based Electroactive Polymer Composites for Muscle Tissue Engineering10.1021/acsapm.9b00566 ↗
16. Cells, Materials, and Fabrication Processes for Cardiac Tissue Engineering10.3389/fbioe.2020.00955 ↗
17. Biodegradable polymers as biomaterials10.1016/j.progpolymsci.2007.05.017 ↗
18. Adding MgO nanoparticles to hydroxyapatite–PLLA nanocomposites for improved bone tissue engineering applications10.1016/j.actbio.2014.12.004 ↗
19. Développement par compression de l’électricité polaire dans les cristaux hémièdres à faces inclinées10.3406/bulmi.1880.1564 ↗
20. Review: Environmental friendly lead-free piezoelectric materials10.1007/s10853-009-3643-0 ↗
21. Learning, L., and Hill, L. (2019). Chapter 2: The Big Picture, Oklahoma State University.
22. Mason, W.P., Thurston, R.N., Arnold, W., and Eisenmenger, W. (1976). Physical Acoustics, Academic Press.
23. Influence of biaxial stretching mode on the crystalline texture in polylactic acid films10.1016/j.polymer.2008.09.053 ↗
24. Biodegradable Polymeric Materials in Degradable Electronic Devices10.1021/acscentsci.7b00595 ↗
25. Piezoelectricity of biopolymers
26. Sadasivuni, K.K., Ponnamma, D., Kim, J., Cabibihan, J.-J., and AlMaadeed, M.A. (2019). 12- Piezo- and Thermoelectric Materials from Biopolymer Composites. Biopolymer Composites in Electronics, Elsevier.
27. Electrospinning highly oriented and crystalline polylactic acid fiber mats10.1007/s10853-013-7899-z ↗
28. Dincer, I. (2018). 3.9 Piezoelectric Energy Production. Comprehensive Energy Systems, Elsevier.10.1016/B978-0-12-809597-3.00336-9 ↗
29. Novel polymer ferroelectric behavior via crystal isomorphism and the nanoconfinement effect10.1016/j.polymer.2013.01.035 ↗
30. Ferroelectricity in polyvinylidene fluoride10.1063/1.325011 ↗
31. Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering10.1002/jbm.b.33101 ↗
32. Growth factor delivery-based tissue engineering: General approaches and a review of recent developments10.1098/rsif.2010.0223 ↗
33. Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configuration10.1038/srep37960 ↗
34. Taherkhani, S., and Moztarzadeh, F. (2016). Fabrication of a polyε-caprolactone/starch nanocomposite scaffold with a solvent-casting/salt-leaching technique for bone tissue engineering applications. J. Appl. Polym. Sci., 133.10.1002/app.43523 ↗
35. Cardiac tissue engineering, biomaterial scaffolds, and their fabrication techniques10.1002/pat.5273 ↗
36. Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures10.1007/s12598-019-01231-4 ↗
37. Additive manufacturing 3D printing: A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
38. Design and Development of Three-Dimensional Scaffolds for Tissue Engineering10.1205/cherd06196 ↗
39. Review scaffold design and stem cells for tooth regeneration10.1016/j.jdsr.2012.09.001 ↗
40. Electrospun nanofibers in cancer research: From engineering of: From vitro 3D cancer models to therapy10.1039/D0BM00390E ↗
41. Chi, H., Xue, J., Zhang, C., Chen, H., Li, L., and Qin, Y. (2018). High Pressure Treatment for Improving Water Vapour Barrier Properties of Polylactic acid/Ag Nanocomposite Films. Polymers, 10.10.3390/polym10091011 ↗
42. Mohan, D., Arris, F.A., Sajab, M.S., and Mansor, N.N. (2021). Facile Synthesis of 3D Printed Tailor-Shape Electrode PLA-GnP for Electrochemical Sensing. Eng. Proc., 4.10.3390/Micromachines2021-09571 ↗
43. Polylactic-co-glycolic acid: Carbon nanofiber composites for myocardial tissue engineering applications10.1016/j.actbio.2011.04.028 ↗
44. Wet spinning of cellulose nanowhiskers; fiber yarns obtained only from colloidal cellulose crystals10.1016/j.polymer.2019.122116 ↗
45. Electrospun thymosin Beta-4 loaded PLGA/PLA nanofiber/ microfiber hybrid yarns for tendon tissue engineering application10.1016/j.msec.2019.110268 ↗
46. High-efficiency preparation of polypropylene nanofiber by melt differential centrifugal electrospinning10.1002/app.48299 ↗
47. Use of melt blown polypropylene nanofiber templates to obtain homogenous pore channels in glycidyl methacrylate/ethyl dimethacrylate-based monoliths10.1080/00986445.2020.1715958 ↗
48. Solution Blow Spinning SBS Nanofibers for Composite Air Filter Masks10.1021/acsanm.9b00207 ↗
49. The effect of different process parameters on polyamide 66 nano fiber by force spinning method10.1063/1.5142923 ↗
50. Electrospinning of Fe/SiC Hybrid Fibers for Highly Efficient Microwave Absorption10.1021/acsami.6b15721 ↗
51. Electrospinning jets and polymer nanofibers10.1016/j.polymer.2008.02.002 ↗
52. Simple methods influencing on properties of electrospun fibrous mats10.1002/app.36569 ↗
53. Hyaluronic acid electrospinning: Challenges, applications in wound dressings and new perspectives10.1016/j.ijbiomac.2021.01.100 ↗
54. Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile properties10.1016/j.compscitech.2010.01.010 ↗
55. Tailoring Crystallinity of Electrospun Plla Fibres by Control of Electrospinning Parameters10.3390/polym4031331 ↗
56. Preparation of Aligned Polymer Micro/Nanofibres by Electrospinning10.1088/0256-307X/25/8/089 ↗
57. Polylactic acid: Synthesis and biomedical applications10.1111/jam.14290 ↗
58. Sensing Using Piezoelectric Chiral Polymer Fiber10.1143/JJAP.51.09LD16 ↗
59. Highly piezoelectric biocompatible and soft composite fibers10.1063/1.3683482 ↗
60. Morvan, J. (2012). Highly Piezoelectric Soft Composite Fibers, Kent State University.
61. A novel method of selecting solvents for polymer electrospinning10.1016/j.polymer.2010.01.031 ↗
62. Effects of solvents on electrospun polymeric fibers: Preliminary study on polystyrene10.1002/pi.1599 ↗
63. Electrospun Polyl-Lactic Acid Nanofibers for Nanogenerator and Diagnostic Sensor Applications. Macromol
64. Piezoelectric properties of electrospun polyl-lactic acid nanofiber web10.1016/j.matlet.2015.02.038 ↗
65. Preparation and cytocompatibility of polylactic acid/hydroxyapatite/graphene oxide nanocomposite fibrous membrane10.1007/s11434-012-5336-3 ↗
66. An overview of the recent developments in polylactide PLA research10.1016/j.biortech.2010.05.092 ↗
67. Properties of lactic acid based polymers and their correlation with composition10.1016/S0079-6700(02)00012-6 ↗
68. Processing technologies for polylactic acid10.1016/j.progpolymsci.2008.05.004 ↗
69. Polylactide Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications10.1002/mabi.200500062 ↗
70. Tailoring Crystallization: Towards High-Performance Polylactic acid10.1002/adma.201305413 ↗
71. Triangular Polymer Single Crystals: Stereocomplexes, Twins, and Frustrated Structures10.1021/ma9707998 ↗
72. Stereocomplex formation between enantiomeric polylactic acids
73. Park, H.-S., and Hong, C.-K. (2021). Relationship between the stereocomplex crystallization behavior and mechanical properties of PLLA/PDLA blends. Polymers, 13.10.3390/polym13111851 ↗
74. Stereocomplex formation between enantiomeric polylactic acids. 3. Calorimetric studies on blend films cast from dilute solution10.1021/ma00020a026 ↗
75. Investigation of Phase Transitional Behavior of Polyl-lactide/Polyd-lactide Blend Used to Prepare the Highly-Oriented Stereocomplex10.1021/ma061693s ↗
76. Stereocomplex Formation through Reorganization of Polyl-lactic acid and Polyd-lactic acid Crystals10.1021/ma7024489 ↗
77. Temperature dependence of crystalline transition of highly-oriented polyl-lactide/polyd-lactide blend: In-situ synchrotron X-ray scattering study10.1016/j.polymer.2012.11.076 ↗
78. Stereocomplex Formation in Enantiomeric Polylactides by Melting Recrystallization of Homocrystals: Crystallization Kinetics and Crystal Morphology10.1021/ma402405c ↗
79. Auras, R.A., Lim, L.-T., Selke, S.E.M., and Tsuji, H. (2010). Wiley Series on Polymer Engineering and Technology. Poly Lactic Acid: Synthesis, Structures, Properties, Processing, and Applications, Wiley.10.1002/9780470649848 ↗
80. Polylactic acid fiber: An overview10.1016/j.progpolymsci.2007.01.005 ↗
81. Stereocomplex formation between enantiomeric polylactic acids. XI. Mechanical properties and morphology of solution-cast films10.1016/S0032-3861(99)00004-X ↗
82. An efficient solid-state polycondensation method for synthesizing stereocomplexed polylactic acids with high molecular weight10.1002/pola.22712 ↗
83. A Literature Review of PolyLactic Acid10.1023/A:1020200822435 ↗
84. Polylactic acid modifications10.1016/j.progpolymsci.2009.12.003 ↗
85. Synthetic biodegradable polymers as orthopedic devices10.1016/S0142-9612(00)00101-0 ↗
86. Fundamental Study on Vibration in Edge Face of Piezoelectric Chiral Polymer Film10.7567/JJAP.52.09KE01 ↗
87. Porous magnesium-based scaffolds for tissue engineering10.1016/j.msec.2016.11.027 ↗
88. Lee, K., and Kaplan, D. (2006). Polymers as Biomaterials for Tissue Engineering and Controlled Drug Delivery. Tissue Engineering I, Springer.
89. Tungsten disulfide nanotubes reinforced biodegradable polymers for bone tissue engineering10.1016/j.actbio.2013.05.018 ↗
90. Biopolymers: Overview of several properties and consequences on their applications10.1016/S0142-9418(01)00107-6 ↗
91. Local piezoelectric activity of single polyL-lactic acid PLLA microfibers10.1007/s00339-012-7095-z ↗
92. Polymeric scaffolds for dental pulp tissue engineering: A review10.1016/j.dental.2019.11.005 ↗
93. Improvements of thermal property and crystallization behavior of PLLA based multiblock copolymer by forming stereocomplex with PDLA oligomer10.1016/j.polymer.2006.03.090 ↗
94. Decoupling the effects of crystallinity and orientation on the shear piezoelectricity of polylactic acid10.1002/polb.22345 ↗
95. Piezoelectric antibacterial fabric comprised of polyl-lactic acid yarn10.7567/JJAP.56.10PG01 ↗
96. Tailoring the morphology and crystallinity of polyL-lactide acid electrospun membranes10.1088/1468-6996/12/1/015001 ↗
97. Evaluation of polyL-lactic acid as a material for intravascular polymeric stents10.1016/0142-9612(92)90068-Y ↗
98. Biodegradable nanofiber-based piezoelectric transducer10.1073/pnas.1910343117 ↗
99. Structure and process relationship of electrospun bioabsorbable nanofiber membranes10.1016/S0032-3861(02)00275-6 ↗
100. Precision injection molding10.1295/kobunshi.39.430 ↗