journal article·2022-06-01Open access

Biodegradable Iron and Porous Iron: Mechanical Properties, Degradation Behaviour, Manufacturing Routes and Biomedical Applications

Mariana Salama, Maria Fátima Vaz, Rogério Colaço, Catarina Santos, Maria Carmezim

Abstract

Biodegradable metals have been extensively studied due to their potential use as temporary biomedical devices, on non-load bearing applications. These types of implants are requested to function for the healing period, and should degrade after the tissue heals. A balance between mechanical properties requested at the initial stage of implantation and the degradation rate is required. The use of temporary biodegradable implants avoids a second surgery for the removal of the device, which brings high benefits to the patients and avoids high societal costs. Among the biodegradable metals, iron as a biodegradable metal has increased attention over the last few years, especially with the incorporation of additive manufacturing processes to obtain tailored geometries of porous structures, which give rise to higher corrosion rates. Withal by mimic natural bone hierarchical porosity, the mechanical properties of obtained structures tend to equalize that of human bone. This review article presents some of the most important works in the field of iron and porous iron. Fabrication techniques for porous iron are tackled, including conventional and new methods highlighting the unparalleled opportunities given by additive manufacturing. A comparison among the several methods is taken. The effects of the design and the alloying elements on the mechanical properties are also revised. Iron alloys with antibacterial properties are analyzed, as well as the biodegradation behavior and biocompatibility of iron. Although is necessary for further in vivo research, iron is presenting satisfactory results for upcoming biomedical applications, as orthopaedic temporary scaffolds and coronary stents.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

IDMEC, Instituto Superior Técnico, Departamento de Engenharia Mecânica, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

ESTSetúbal, CDP2T, Instituto Politécnico de Setúbal, Campos IPS, 2910-761 Setúbal, Portugal

Centro Química Estrutural, IST, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

Funding

FCT · LAETA

References (72)

Show source-provided references
1. Santos, C., Alves, M., Montemor, M., and Carmezim, M. (2017). Bioresorbable metallic implants: Surface functionalization with nanoparticles and nanostructures. Adv. Mater. Appl. Micro Nano Scale, 219–242.
2. Corrosion behavior of biodegradable metals in two different simulated physiological solutions: Comparison of Mg, Zn and Fe10.1016/j.corsci.2021.109278 ↗
3. Updates on the research and development of absorbable metals for biomedical applications10.1007/s40204-018-0091-4 ↗
4. Gibson, L.J., and Ashby, M.F. (1999). Cellular Solids: Structure & Properties, Cambridge University Press.
5. Metals for bone implants. Part 1. Powder metallurgy and implant rendering10.1016/j.actbio.2014.06.025 ↗
6. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review10.1016/j.biomaterials.2016.01.012 ↗
7. Microstructural and mechanical properties of biodegradable iron foam prepared by powder metallurgy10.1016/j.matdes.2015.06.022 ↗
8. Developments in metallic biodegradable stents10.1016/j.actbio.2009.10.006 ↗
9. Long-term in vitro degradation behaviour of Fe and Fe/Mg 2 Si composites for biodegradable implant applications10.1039/C8RA00404H ↗
10. Novel antibacterial biodegradable Fe-Mn-Ag alloys produced by mechanical alloying10.1016/j.msec.2018.03.005 ↗
11. Fe–Mn–Cu alloy as biodegradable material with enhanced antimicrobial properties10.1016/j.matlet.2018.11.117 ↗
12. Fe-Au and Fe-Ag composites as candidates for biodegradable stent materials10.1002/jbm.b.33389 ↗
13. Gorejová, R., Oriňaková, R., Orságová Králová, Z., Baláž, M., Kupková, M., Hrubovčáková, M., Haverová, L., Džupon, M., Oriňak, A., and Kaľavský, F. (2020). In vitro corrosion behavior of biodegradable iron foams with polymeric coating. Materials, 13.10.3390/ma13010184 ↗
14. Additive manufacturing of biodegradable metals: Current research status and future perspectives10.1016/j.actbio.2019.04.046 ↗
15. Design and properties of 3D scaffolds for bone tissue engineering10.1016/j.actbio.2016.06.032 ↗
16. Modifications on porous absorbable Fe-based scaffolds for bone applications: A review from corrosion and biocompatibility viewpoints10.1002/jbm.b.34893 ↗
17. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
18. Additive manufacturing of metallic components—Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
19. Additively manufactured porous metallic biomaterials10.1039/C9TB00420C ↗
20. Zadpoor, A. (2018). Frontiers of Additively Manufactured Metallic Materials. Materials, 11.10.3390/ma11091566 ↗
21. Additively manufactured biodegradable porous iron10.1016/j.actbio.2018.07.011 ↗
22. Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs10.1002/jor.23075 ↗
23. 3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration10.1021/acsbiomaterials.7b00885 ↗
24. Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing10.1016/j.actbio.2013.04.016 ↗
25. Morphological and mechanical characterization of topologically ordered open cell porous iron foam fabricated using 3D printing and pressureless microwave sintering10.1016/j.matdes.2018.09.029 ↗
26. Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes10.1002/adem.201900049 ↗
27. Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications10.1016/j.actbio.2019.12.018 ↗
28. Three-dimensional printing of metals for biomedical applications10.1016/j.mtbio.2019.100024 ↗
29. Additively manufactured functionally graded biodegradable porous iron10.1016/j.actbio.2019.07.013 ↗
30. In vitro degradation and biocompatibility of Fe–Pd and Fe–Pt composites fabricated by spark plasma sintering10.1016/j.msec.2013.10.023 ↗
31. Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies10.1016/j.actbio.2009.11.025 ↗
32. Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys10.1016/j.actbio.2016.08.032 ↗
33. Cambridge Engineering Selector (CES) (2022, May 27). GrantaDesign. Available online: https://www.grantadesign.com/?__wpdm_view_count=9457316beb&id=3407.
34. Tesinova, P. (2011). Bone: A composite natural material. Advances in Composite Materials: Analysis of Natural and Man-Made Materials, InTechOpen.10.5772/728 ↗
35. Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
36. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
37. Fundamental theory of biodegradable metals—Definition, criteria, and design10.1002/adfm.201805402 ↗
38. Degradation behaviour of metallic biomaterials for degradable stents10.4028/www.scientific.net/AMR.15-17.113 ↗
39. In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material10.1016/j.matlet.2010.10.068 ↗
40. Electroformed iron as new biomaterial for degradable stents: Development process and structure–properties relationship10.1016/j.actbio.2010.01.010 ↗
41. Corrosion fatigue behavior of additively manufactured biodegradable porous iron10.1016/j.corsci.2019.05.003 ↗
42. Corrosion rate modelling of biodegradable porous iron scaffold considering the effect of porosity and pore morphology10.1016/j.msec.2019.109776 ↗
43. Gąsior, G., Szczepański, J., and Radtke, A. (2021). Biodegradable Iron-Based Materials—What Was Done and What More Can Be Done?. Materials, 14.10.3390/ma14123381 ↗
44. Roman, A.M., Geantă, V., Cimpoeșu, R., Munteanu, C., Lohan, N.M., Zegan, G., Cernei, E.R., Ioniță, I., Cimpoeșu, N., and Ioanid, N. (2022). In-vitro analysis of FeMn-Si smart biodegradable alloy. Materials, 15.10.3390/ma15020568 ↗
45. Cimpoeşu, N., Săndulache, F., Istrate, B., Cimpoeşu, R., and Zegan, G. (2018). Electrochemical Behavior of Biodegradable FeMnSi–MgCa Alloy. Metals, 8.10.3390/met8070541 ↗
46. Development of a novel biodegradable porous iron-based implant for bone replacement10.1038/s41598-020-66289-y ↗
47. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
48. Uniform and accelerated degradation of pure iron patterned by Pt disc arrays10.1038/srep23627 ↗
49. In vitro study on newly designed biodegradable Fe-X composites (X = W, CNT) prepared by spark plasma sintering10.1002/jbm.b.32783 ↗
50. Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron10.1016/j.actbio.2010.11.001 ↗
51. Eliaz, N. (2019). Corrosion of Metallic Biomaterials: A Review. Materials, 12.10.3390/ma12030407 ↗
52. In vitro studies on silver implanted pure iron by metal vapor vacuum arc technique10.1016/j.colsurfb.2016.01.065 ↗
53. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
54. Corrosion behaviour of the porous iron scaffold in simulated body fluid for biodegradable implant application10.1016/j.msec.2019.01.114 ↗
55. Effect of Grain Size on Corrosion: A Review10.5006/1.3462912 ↗
56. Recent advancements in Fe-based biodegradable materials for bone repair10.1007/s10853-018-3011-z ↗
57. Kruger, J. (1979). Fundamental aspects of the corrosion of metallic implants. Corrosion and Degradation of Implant Materials, ASTM International.10.1520/STP35940S ↗
58. Electrochemical corrosion of metallic biomaterials10.1016/0142-9612(84)90046-2 ↗
59. In vivo metallic biomaterials and surface modification10.1016/S0921-5093(99)00101-X ↗
60. In vitro degradation behaviour, cytocompatibility and hemocompatibility of topologically ordered porous iron scaffold prepared using 3D printing and pressureless microwave sintering10.1016/j.msec.2019.110247 ↗
61. Current status and outlook on the clinical translation of biodegradable metals10.1016/j.mattod.2018.05.018 ↗
62. Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial10.1007/s10856-010-4070-0 ↗
63. A review on in vitro corrosion performance test of biodegradable metallic materials10.1016/S1003-6326(13)62730-2 ↗
64. The use of multiple pseudo-physiological solutions to simulate the degradation behavior of pure iron as a metallic resorbable implant: A surface-characterization study10.1039/C6CP02451C ↗
65. Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta10.1016/j.biomaterials.2006.05.029 ↗
66. Biocompatibility of pure iron: In vitro assessment of degradation kinetics and cytotoxicity on endothelial cells10.1016/j.msec.2008.12.019 ↗
67. Understanding the impact of grain structure in austenitic stainless steel from a nanograined regime to a coarse-grained regime on osteoblast functions using a novel metal deformation–annealing sequence10.1016/j.actbio.2012.12.003 ↗
68. Short-Term Effects of Biocorrodible Iron Stents in Porcine Coronary Arteries10.1111/j.1540-8183.2007.00319.x ↗
69. Long-term in vivo corrosion behavior, biocompatibility and bioresorption mechanism of a bioresorbable nitrided iron scaffold10.1016/j.actbio.2017.03.020 ↗
70. How to accelerate the endothelialization of stents
71. Electrochemical behavior, biocompatibility and mechanical performance of biodegradable iron with PEI coating10.1002/jbm.a.37318 ↗
72. Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus10.1016/j.biomaterials.2017.02.030 ↗