journal article·2019-04-01Open access

3D Printing Custom Bioactive and Absorbable Surgical Screws, Pins, and Bone Plates for Localized Drug Delivery

Karthik Tappa, Udayabhanu Jammalamadaka, Jeffery A. Weisman, David H. Ballard, Dallas D. Wolford, Cecilia Pascual-Garrido, Larry M. Wolford, Pamela K. Woodard, David K. Mills

Abstract

Additive manufacturing has great potential for personalized medicine in osseous fixation surgery, including maxillofacial and orthopedic applications. The purpose of this study was to demonstrate 3D printing methods for the fabrication of patient-specific fixation implants that allow for localized drug delivery. 3D printing was used to fabricate gentamicin (GS) and methotrexate (MTX)-loaded fixation devices, including screws, pins, and bone plates. Scaffolds with different infill ratios of polylactic acid (PLA), both without drugs and impregnated with GS and MTX, were printed into cylindrical and rectangular-shaped constructs for compressive and flexural strength mechanical testing, respectively. Bland PLA constructs showed significantly higher flexural strength when printed in a Y axis at 100% infill compared to other axes and infill ratios; however, there was no significant difference in flexural strength between other axes and infill ratios. GS and MTX-impregnated constructs had significantly lower flexural and compressive strength as compared to the bland PLA constructs. GS-impregnated implants demonstrated bacterial inhibition in plate cultures. Similarly, MTX-impregnated implants demonstrated a cytotoxic effect in osteosarcoma assays. This proof of concept work shows the potential of developing 3D printed screws and plating materials with the requisite mechanical properties and orientations. Drug-impregnated implants were technically successful and had an anti-bacterial and chemotherapeutic effect, but drug addition significantly decreased the flexural and compressive strengths of the custom implants.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mallinckrodt Institute of Radiology, Washington University School of Medicine, St. Louis, MO 63110, USA

University of Illinois at Chicago Occupational Medicine, Chicago, IL 60612, USA

Department of Surgery, UT Southwestern Medical Center; University of Texas Southwestern, Dallas, TX 75390, USA

Adult Reconstruction-Adolescent and Young Adult Hip Service, Washington University Orthopedics, St Louis, MO 63110, USA

Department of Oral and Maxillofacial Surgery, Texas A&M University College of Dentistry and Baylor University Medical Center, Dallas, TX 75246, USA

Department of Biomedical Engineering, Louisiana Tech University, 305 Wisteria Street, Ruston, LA 71272, USA

References (26)

Show source-provided references
1. Implant biomaterials: A comprehensive review10.12998/wjcc.v3.i1.52 ↗
2. Insights into the effects of tensile and compressive loadings on human femur bone10.4103/2277-9175.129375 ↗
3. Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning and surgical placement10.1016/S0278-2391(99)90437-8 ↗
4. Smeltzer, M.S., Nelson, C.L., and Evans, R.P. (2008). Biofilms and Aseptic Loosening. The Role of Biofilms in Device-Related Infections, Springer.10.1007/7142_2008_1 ↗
5. [Depot effects of various antibiotics mixed with Palacos resins]
6. Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: State of the art and recent developments10.1016/j.compscitech.2003.09.001 ↗
7. Park, H., Temenoff, J.S., and Mikos, A.G. (2007). Biodegradable Orthopedic Implants. Engineering of Functional Skeletal Tissues, Springer.10.1007/978-1-84628-366-6_4 ↗
8. Tappa, K., Jammalamadaka, U., Ballard, D.H., Bruno, T., Israel, M.R., Vemula, H., Meacham, J.M., Mills, D.K., Woodard, P.K., and Weisman, J.A. (2017). Medication eluting devices for the field of OBGYN (MEDOBGYN): 3D printed biodegradable hormone eluting constructs, a proof of concept study. PLoS ONE, 12.10.1371/journal.pone.0182929 ↗
9. Three-dimensional printing of bioactive hernia meshes: In vitro proof of principle10.1016/j.surg.2016.08.033 ↗
10. Medical Applications for 3D Printing: Current and Projected Uses
11. Antibiotic and chemotherapeutic enhanced three-dimensional printer filaments and constructs for biomedical applications
12. Mechanical Properties and Porosity of Acrylic Cement Bone Loaded with Alendronate Powder10.7150/ijms.27759 ↗
13. Nadernezhad, A., Unal, S., Khani, N., and Koc, B. (2019). Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites. Int. J. Adv. Manuf. Technol., 1–14.10.1007/s00170-018-03283-9 ↗
14. Biodegradable Materials for Bone Repair and Tissue Engineering applications10.3390/ma8095273 ↗
15. 3D Printed Antibiotic and Chemotherapeutic Eluting Catheters for Potential Use in Interventional Radiology10.1016/j.acra.2018.03.022 ↗
16. 3D printing of surgical hernia meshes impregnated with contrast agents: In vitro proof of concept with imaging characteristics on computed tomography10.1186/s41205-018-0037-4 ↗
17. Boyer, C.J., Ballard, D.H., Weisman, J.A., Hurst, S., McGee, D.J., Mills, D.K., Woerner, J.E., Jammalamadaka, U., Tappa, K., and Alexander, J.S. (2018). Three-Dimensional Printing Antimicrobial and Radiopaque Constructs. 3D Print. Addit. Manuf., 5.10.1089/3dp.2017.0099 ↗
18. Boyer, C.J., Boktor, M., Samant, H., White, L.A., Wang, Y., Ballard, D.H., Huebert, R.C., Woerner, J.E., Ghali, G.E., and Alexander, J.S. (2019). 3D Printing for Bio-Synthetic Biliary Stents. Bioengineering, 6.10.3390/bioengineering6010016 ↗
19. Clinical Applications of 3D Printing: Primer for Radiologists10.1016/j.acra.2017.08.004 ↗
20. Mesoporous bioactive glasses: Promising platforms for antibacterial strategies10.1016/j.actbio.2018.09.052 ↗
21. Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., and Cao, A. (2017). Metallic Biomaterials: Current Challenges and Opportunities. Materials, 10.10.3390/ma10080884 ↗
22. Antibiotic beads in the management of surgical infections10.1016/0002-9610(89)90597-7 ↗
23. Additively manufactured medical products—The FDA perspective10.1186/s41205-016-0005-9 ↗
24. Regulating 3D-printed medical products10.1126/scitranslmed.aan6521 ↗
25. Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): Guidelines for medical 3D printing and appropriateness for clinical scenarios10.1186/s41205-018-0030-y ↗
26. (2019, February 14). New ACR-Sponsored CPT Codes Approved by the AMA | American College of Radiology. Available online: https://www.acr.org/Advocacy-and-Economics/Advocacy-News/Advocacy-News-Issues/In-the-November-2-2018-Issue/New-ACR-Sponsored-CPT-Codes-Approved-by-the-AMA.