journal article·2023-02-24Open access

Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review

Fabio Distefano, Salvatore Pasta, Gabriella Epasto

Abstract

The progress in additive manufacturing has remarkably increased the application of lattice materials in the biomedical field for the fabrication of scaffolds used as bone substitutes. Ti6Al4V alloy is widely adopted for bone implant application as it combines both biological and mechanical properties. Recent breakthroughs in biomaterials and tissue engineering have allowed the regeneration of massive bone defects, which require external intervention to be bridged. However, the repair of such critical bone defects remains a challenge. The present review collected the most significant findings in the literature of the last ten years on Ti6Al4V porous scaffolds to provide a comprehensive summary of the mechanical and morphological requirements for the osteointegration process. Particular attention was given on the effects of pore size, surface roughness and the elastic modulus on bone scaffold performances. The application of the Gibson–Ashby model allowed for a comparison of the mechanical performance of the lattice materials with that of human bone. This allows for an evaluation of the suitability of different lattice materials for biomedical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy

Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy

Department of Research, IRCCS ISMETT, Via Tricomi n.5, 90127 Palermo, Italy

References (100+)

Show source-provided references
1. Mechanical Performance of Additively Manufactured Meta-Biomaterials10.1016/j.actbio.2018.12.038 ↗
2. Gibson, L.J., and Ashby, M.F. (1997). Cellular Solids—Structure and Properties, Cambridge University Press.10.1017/CBO9781139878326 ↗
3. Topology-Mechanical Property Relationship of 3D Printed Strut, Skeletal, and Sheet Based Periodic Metallic Cellular Materials
4. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges10.1016/j.compositesb.2018.02.012 ↗
5. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations10.1115/1.4028725 ↗
6. Bhushan, S., Singh, S., Maiti, T.K., Sharma, C., Dutt, D., Sharma, S., Li, C., and Tag Eldin, E.M. (2022). Scaffold Fabrication Techniques of Biomaterials for Bone Tissue Engineering: A Critical Review. Bioengineering, 9.10.3390/bioengineering9120728 ↗
7. Selective Laser Melting of Aluminium Components10.1016/j.jmatprotec.2010.09.019 ↗
8. Selective Laser Sintering in Biomedical Engineering10.1007/s11517-012-1001-x ↗
9. On the Development of Direct Metal Laser Sintering for Rapid Tooling10.1016/S0924-0136(03)00283-8 ↗
10. Additive Manufacturing of Metallic Components by Selective Electron Beam Melting—A Review10.1080/09506608.2016.1176289 ↗
11. The Effect of Topology on the Quasi-Static and Dynamic Behaviour of SLM AlSi10Mg Lattice Structures10.1007/s00170-021-08203-y ↗
12. Convective Heat Dissipation with Lattice-Frame Materials10.1016/j.mechmat.2003.07.001 ↗
13. Numerical Comparison of Lattice Unit Cell Designs for Medical Implants by Additive Manufacturing10.1080/17452759.2018.1491713 ↗
14. Topology Optimization and Characterization of Ti6Al4V ELI Cellular Lattice Structures by Laser Powder Bed Fusion for Biomedical Applications10.1016/j.msea.2019.138330 ↗
15. Ti-6Al-4V Triply Periodic Minimal Surface Structures for Bone Implants Fabricated via Selective Laser Melting10.1016/j.jmbbm.2015.06.024 ↗
16. Additive Manufacturing of Biomorphic Scaffolds for Bone Tissue Engineering10.1007/s00170-021-06773-5 ↗
17. Surface Modification of Titanium, Titanium Alloys, and Related Materials for Biomedical Applications10.1016/j.mser.2004.11.001 ↗
18. Biocompatibility of Ti-Alloys for Long-Term Implantation10.1016/j.jmbbm.2012.11.014 ↗
19. Titanium Alloys in Total Joint Replacement—A Materials Science Perspective10.1016/S0142-9612(97)00146-4 ↗
20. The Impact of Substrate Stiffness and Mechanical Loading on Fibroblast-Induced Scaffold Remodeling10.1089/ten.tea.2011.0514 ↗
21. Scaffold Stiffness Influences Cell Behavior: Opportunities for Skeletal Tissue Engineering10.2174/1874325000802010103 ↗
22. Titanium Alloys for Biomedical Applications10.1016/j.msec.2005.08.032 ↗
23. Fabrication, Pore Structure and Compressive Behavior of Anisotropic Porous Titanium for Human Trabecular Bone Implant Applications10.1016/j.jmbbm.2015.02.023 ↗
24. Influence of Pore Size of Porous Titanium Fabricated by Vacuum Diffusion Bonding of Titanium Meshes on Cell Penetration and Bone Ingrowth10.1016/j.actbio.2016.01.022 ↗
25. Tailoring the Porosity and Pore Size of Electrospun Synthetic Human Elastin Scaffolds for Dermal Tissue Engineering10.1016/j.biomaterials.2011.05.065 ↗
26. Implant Surface Roughness and Bone Healing: A Systematic Review10.1177/154405910608500603 ↗
27. Surface Roughness of Implants: A Review
28. Mechanics of Three-Dimensional Cellular Materials10.1098/rspa.1982.0088 ↗
29. SLM Lattice Structures: Properties, Performance, Applications and Challenges10.1016/j.matdes.2019.108137 ↗
30. Effective Properties of the Octet-Truss Lattice Material10.1016/S0022-5096(01)00010-2 ↗
31. Mechanical Performance and Fatigue Life Prediction of Lattice Structures: Parametric Computational Approach10.1016/j.compstruct.2019.111821 ↗
32. Compressive Fatigue Properties of Additive-Manufactured Ti-6Al-4V Cellular Material with Different Porosities10.1016/j.msea.2020.139695 ↗
33. Continuous Compression Behaviors of Selective Laser Melting Ti-6Al-4V Alloy with Cuboctahedron Cellular Structures10.1016/j.msec.2019.03.054 ↗
34. Mechanical Properties of Regular Porous Biomaterials Made from Truncated Cube Repeating Unit Cells: Analytical Solutions and Computational Models10.1016/j.msec.2015.11.001 ↗
35. Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties10.3390/ma8041871 ↗
36. Assessment of Analytical Relationships for Mechanical Properties of Truncated Octahedron and Diamond Lattice Structures10.1016/j.mtcomm.2021.102756 ↗
37. Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams10.1016/j.ijmecsci.2019.105091 ↗
38. Mechanics of Additively Manufactured Porous Biomaterials Based on the Rhombicuboctahedron Unit Cell10.1016/j.jmbbm.2015.07.013 ↗
39. Mechanical Behavior of Additively Manufactured Porous Biomaterials Made from Truncated Cuboctahedron Unit Cells10.1016/j.ijmecsci.2015.11.033 ↗
40. Additively-Manufactured Functionally Graded Ti-6Al-4V Lattice Structures with High Strength under Static and Dynamic Loading: Experiments10.1016/j.ijimpeng.2017.09.018 ↗
41. Biological and Mechanical Property Analysis for Designed Heterogeneous Porous Scaffolds Based on the Refined TPMS10.1016/j.jmbbm.2020.103727 ↗
42. Photonic Band Gaps in Materials with Triply Periodic Surfaces and Related Tubular Structures10.1103/PhysRevB.68.115107 ↗
43. On the Directional Elastic Modulus of the TPMS Structures and a Novel Hybridization Method to Control Anisotropy10.1016/j.matdes.2021.110074 ↗
44. Effect of Geometry on the Mechanical Properties of Ti-6Al-4V Gyroid Structures Fabricated via SLM: A Numerical Study10.1016/j.matdes.2019.108165 ↗
45. Anisotropic Ti-6Al-4V Gyroid Scaffolds Manufactured by Electron Beam Melting (EBM) for Bone Implant Applications10.1016/j.matdes.2017.10.040 ↗
46. The Manufacturability and Compression Properties of the Schwarz Diamond Type Ti6Al4V Cellular Lattice Fabricated by Selective Laser Melting10.1007/s00170-019-04422-6 ↗
47. The Relationships between Deformation Mechanisms and Mechanical Properties of Additively Manufactured Porous Biomaterials10.1016/j.jmbbm.2016.09.018 ↗
48. Effect of Unit Configurations and Parameters on the Properties of Ti–6Al–4V Unit-Stacked Scaffolds: A Trade-off between Mechanical and Permeable Performance10.1016/j.jmbbm.2021.104332 ↗
49. Enhancement in the Mechanical Behaviour of a Schwarz Primitive Periodic Minimal Surface Lattice Structure Design10.1016/j.ijmecsci.2021.106977 ↗
50. Stiffness and Yield Strength of Architectured Foams Based on the Schwarz Primitive Triply Periodic Minimal Surface10.1016/j.ijplas.2017.03.005 ↗
51. Elastic Mechanical Property Hybridization of Configuration-Varying TPMS with Geometric Continuity10.1016/j.matdes.2022.110995 ↗
52. Time Dependent Response of Architectured Neovius Foams10.1016/j.ijmecsci.2017.03.017 ↗
53. Finite Element Prediction of Effective Elastic Properties of Interpenetrating Phase Composites with Architectured 3D Sheet Reinforcements10.1016/j.ijsolstr.2016.01.011 ↗
54. Numerical and Experimental Investigation of the Joint Stiffness in Lattice Structures Fabricated by Additive Manufacturing10.1016/j.ijmecsci.2018.09.014 ↗
55. Design, Optimization, and Validation of Mechanical Properties of Different Cellular Structures for Biomedical Application10.1007/s00170-019-04671-5 ↗
56. Abate, K.M., Nazir, A., Chen, J.E., and Jeng, J.Y. (2020). Design, Optimization, and Evaluation of Additively Manufactured Vintiles Cellular Structure for Acetabular Cup Implant. Processes, 8.10.3390/pr8010025 ↗
57. Compressive Behavior Assessment of a Newly Developed Circular Cell-Based Lattice Structure10.1016/j.matdes.2021.109716 ↗
58. Mechanical Behaviour of a Novel Biomimetic Lattice Structure for Bone Scaffold10.1016/j.jmbbm.2023.105656 ↗
59. Mechanoregulation Modelling of Stretching versus Bending Dominated Periodic Cellular Solids10.1016/j.mtcomm.2022.104315 ↗
60. The Influence of Laser Parameters and Scanning Strategies on the Mechanical Properties of a Stochastic Porous Material10.1016/j.matdes.2017.06.041 ↗
61. The Status, Challenges, and Future of Additive Manufacturing in Engineering10.1016/j.cad.2015.04.001 ↗
62. Influence of Laser Parameters and Complex Structural Features on the Bio-Inspired Complex Thin-Wall Structures Fabricated by Selective Laser Melting10.1016/j.jmatprotec.2018.12.004 ↗
63. Sachs, E.M. (2000). Powder Dispensing Apparatus Using Vibration. (No. 6,036,777), U.S. Patent, Washington, DC: U.S. Patent and Trademark Office.
64. Horizontal Dimensional Accuracy Prediction of Selective Laser Melting10.1016/j.matdes.2018.08.059 ↗
65. Dispersion Behavior of 3D-Printed Columns with Homogeneous Microstructures Comprising Differing Element Shapes10.1016/j.ces.2017.02.012 ↗
66. Abdulhameed, O., Al-Ahmari, A., Ameen, W., and Mian, S.H. (2019). Additive Manufacturing: Challenges, Trends, and Applications. Adv. Mech. Eng., 11.10.1177/1687814018822880 ↗
67. Topological Design and Additive Manufacturing of Porous Metals for Bone Scaffolds and Orthopaedic Implants: A Review10.1016/j.biomaterials.2016.01.012 ↗
68. Porous Scaffolds for Bone Regeneration10.1016/j.jsamd.2020.01.007 ↗
69. Bone Tissue Engineering Using 3D Printing10.1016/j.mattod.2013.11.017 ↗
70. Mayfield, C.K., Ayad, M., Lechtholz-Zey, E., Chen, Y., and Lieberman, J.R. (2022). 3D-Printing for Critical Sized Bone Defects: Current Concepts and Future Directions. Bioengineering, 9.10.3390/bioengineering9110680 ↗
71. Abdulmaged, A.I., Soon, C.F., Talip, B.A., Zamhuri, S.A.A., Mostafa, S.A., and Zhou, W. (2022). Characterization of Alginate–Gelatin–Cholesteryl Ester Liquid Crystals Bioinks for Extrusion Bioprinting of Tissue Engineering Scaffolds. Polymers, 14.10.3390/polym14051021 ↗
72. Direct Metal Fabrication of Titanium Implants with Tailored Materials and Mechanical Properties Using Electron Beam Melting Technology10.1016/j.msec.2007.04.022 ↗
73. Additively Manufactured Space-Filling Meta-Implants10.1016/j.actbio.2021.02.020 ↗
74. Mechanical Interaction between Additive-Manufactured Metal Lattice Structures and Bone in Compression: Implications for Stress Shielding of Orthopaedic Implants10.1016/j.jmbbm.2021.104608 ↗
75. Fabrication of Customized Ti6AI4V Heterogeneous Scaffolds with Selective Laser Melting: Optimization of the Architecture for Orthopedic Implant Applications10.1016/j.actbio.2021.03.040 ↗
76. Subject-Specific Finite Element Analysis of a Lumbar Cage Produced by Electron Beam Melting10.1007/s11517-019-02078-8 ↗
77. Design Procedure for Triply Periodic Minimal Surface Based Biomimetic Scaffolds10.1016/j.jmbbm.2021.104871 ↗
78. Customized Implant of Cervical Prostheses Exploiting a Predictive Analysis of Range of Motion
79. Subsidence of a Partially Porous Titanium Lumbar Cage Produced by Electron Beam Melting Technology10.1002/jbm.b.35176 ↗
80. New Developments of Ti-Based Alloys for Biomedical Applications10.3390/ma7031709 ↗
81. Bifunctionalized Hydrogels Promote Angiogenesis and Osseointegration at the Interface of Three-Dimensionally Printed Porous Titanium Scaffolds10.1016/j.matdes.2022.111118 ↗
82. Zhao, H., Shen, S., Zhao, L., Xu, Y., Li, Y., and Zhuo, N. (2021). 3D Printing of Dual-Cell Delivery Titanium Alloy Scaffolds for Improving Osseointegration through Enhancing Angiogenesis and Osteogenesis. BMC Musculoskelet. Disord., 22.10.1186/s12891-021-04617-7 ↗
83. Biofunctional Magnesium Coated Ti6Al4V Scaffold Enhances Osteogenesis and Angiogenesis in Vitro and in Vivo for Orthopedic Application10.1016/j.bioactmat.2020.04.019 ↗
84. Copper-Modified Ti6Al4V Alloy Fabricated by Selective Laser Melting with pro-Angiogenic and Anti-Inflammatory Properties for Potential Guided Bone Regeneration Applications10.1016/j.msec.2018.04.046 ↗
85. Enhanced Angiogenesis and Osteogenesis in Critical Bone Defects by the Controlled Release of BMP-2 and VEGF: Implantation of Electron Beam Melting-Fabricated Porous Ti6Al4V Scaffolds Incorporating Growth Factor-Doped Fibrin Glue10.1088/1748-6041/10/3/035013 ↗
86. 3D Structure and Processing Methods Direct the Biological Attributes of ECM-Based Cardiac Scaffolds10.1038/s41598-019-41831-9 ↗
87. The Effect of Pore Geometry on the in Vitro Biological Behavior of Human Periosteum-Derived Cells Seeded on Selective Laser-Melted Ti6Al4V Bone Scaffolds10.1016/j.actbio.2012.04.001 ↗
88. Additively Manufactured 3D Porous Ti-6Al-4V Constructs Mimic Trabecular Bone Structure and Regulate Osteoblast Proliferation, Differentiation and Local Factor Production in a Porosity and Surface Roughness Dependent Manner10.1088/1758-5082/6/4/045007 ↗
89. Bone Ingrowth of Various Porous Titanium Scaffolds Produced by a Moldless and Space Holder Technique: An in Vivo Study in Rabbits10.1088/1748-6041/11/1/015012 ↗
90. In Vitro and In Vivo Study of Additive Manufactured Porous Ti6Al4V Scaffolds for Repairing Bone Defects10.1038/srep34072 ↗
91. Effect of Pore Size on Bone Ingrowth into Porous Titanium Implants Fabricated by Additive Manufacturing: An in Vivo Experiment10.1016/j.msec.2015.10.069 ↗
92. Influence of Porosity and Pore-Size Distribution in Ti6Al4 v Foam on Physicomechanical Properties, Osteogenesis, and Quantitative Validation of Bone Ingrowth by Micro-Computed Tomography10.1021/acsami.7b13960 ↗
93. Osteogenesis of 3D Printed Porous Ti6Al4V Implants with Different Pore Sizes10.1016/j.jmbbm.2018.04.010 ↗
94. The Effect of Pore Size and Porosity of Ti6Al4V Scaffolds on MC3T3-E1 Cells and Tissue in Rabbits10.1007/s11431-018-9352-8 ↗
95. Hydromechanical Mechanism behind the Effect of Pore Size of Porous Titanium Scaffolds on Osteoblast Response and Bone Ingrowth10.1016/j.matdes.2019.108151 ↗
96. Influence of the Pore Size and Porosity of Selective Laser Melted Ti6Al4V ELI Porous Scaffold on Cell Proliferation, Osteogenesis and Bone Ingrowth10.1016/j.msec.2019.110289 ↗
97. Large-Pore-Size Ti6Al4V Scaffolds with Different Pore Structures for Vascularized Bone Regeneration10.1016/j.msec.2021.112499 ↗
98. Biocompatibility of Advanced Manufactured Titanium Implants-A Review10.3390/ma7128168 ↗
99. Hierarchical Tailoring of Strut Architecture to Control Permeability of Additive Manufactured Titanium Implants10.1016/j.msec.2013.05.050 ↗
100. 3D Printed Porous Ti6Al4V Cage: Effects of Additive Angle on Surface Properties and Biocompatibility; Bone Ingrowth in Beagle Tibia Model10.1016/j.matdes.2019.107824 ↗