journal article·2011-08-04Open access

Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing

Silke Wüst, Ralph Müller, Sandra Hofmann

Abstract

Current tissue engineering techniques have various drawbacks: they often incorporate uncontrolled and imprecise scaffold geometries, whereas the current conventional cell seeding techniques result mostly in random cell placement rather than uniform cell distribution. For the successful reconstruction of deficient tissue, new material engineering approaches have to be considered to overcome current limitations. An emerging method to produce complex biological products including cells or extracellular matrices in a controlled manner is a process called bioprinting or biofabrication, which effectively uses principles of rapid prototyping combined with cell-loaded biomaterials, typically hydrogels. 3D tissue printing is an approach to manufacture functional tissue layer-by-layer that could be transplanted in vivo after production. This method is especially advantageous for stem cells since a controlled environment can be created to influence cell growth and differentiation. Using printed tissue for biotechnological and pharmacological needs like in vitro drug-testing may lead to a revolution in the pharmaceutical industry since animal models could be partially replaced by biofabricated tissues mimicking human physiology and pathology. This would not only be a major advancement concerning rising ethical issues but would also have a measureable impact on economical aspects in this industry of today, where animal studies are very labor-intensive and therefore costly. In this review, current controlled material and cell positioning techniques are introduced highlighting approaches towards 3D tissue printing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Pluripotent Stem Cells Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Biomechanics, ETH Zurich, 8093 Zurich, Switzerland

References (100+)

Show source-provided references
1. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
2. Cell and organ printing 2: Fusion of cell aggregates in three-dimensional gels10.1002/ar.a.10059 ↗
3. Tissue engineering10.1126/science.8493529 ↗
4. Biofabrication: A 21st century manufacturing paradigm10.1088/1758-5082/1/2/022001 ↗
5. Mechanosensitivity of bone cells to oscillating fluid flow induced shear stress may be modulated by chemotransport10.1016/S0021-9290(03)00118-0 ↗
6. Intrinsic extracellular matrix properties regulate stem cell differentiation10.1016/j.jbiomech.2009.09.009 ↗
7. Extracellular matrix elasticity directs stem cell differentiation
8. The effect of geometry on three-dimensional tissue growth10.1098/rsif.2008.0064 ↗
9. Effect of scaffold design on bone morphology in vitro10.1089/ten.2006.12.3417 ↗
10. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition10.1089/107632701753213183 ↗
11. Performance of degradable composite bone repair products made via three-dimensional fabrication techniques10.1002/jbm.a.10582 ↗
12. Microarchitectural and mechanical characterization of oriented porous polymer scaffolds10.1016/S0142-9612(02)00361-7 ↗
13. Human osteoprogenitor growth and differentiation on synthetic biodegradable structures after surface modification10.1016/S8756-3282(01)00617-2 ↗
14. Porous 3-D scaffolds from regenerated silk fibroin10.1021/bm034327e ↗
15. Mechanics of oriented electrospun nanofibrous scaffolds for annulus fibrosus tissue engineering10.1002/jor.20384 ↗
16. Biological efficacy of silk fibroin nanofiber membranes for guided bone regeneration10.1016/j.jbiotec.2005.06.033 ↗
17. Bone graft in the shape of human mandibular condyle reconstruction via seeding marrow-derived osteoblasts into porous coral in a nude mice model10.1053/joms.2002.34991 ↗
18. Preparation and histological evaluation of biomimetic three-dimensional hydroxyapatite/chitosan-gelatin network composite scaffolds10.1016/S0142-9612(02)00077-7 ↗
19. Engineering custom-designed osteochondral tissue grafts10.1016/j.tibtech.2007.12.009 ↗
20. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
21. Initial cell pre-cultivation can maximize ECM mineralization by human mesenchymal stem cells on silk fibroin scaffolds10.1016/j.actbio.2011.02.004 ↗
22. Control of in vitro tissue-engineered bone-like structures using human mesenchymal stem cells and porous silk scaffolds10.1016/j.biomaterials.2006.10.019 ↗
23. Biomatrices and biomaterials for future developments of bioprinting and biofabrication10.1088/1758-5082/2/1/014110 ↗
24. A review of rapid prototyping techniques for tissue engineering purposes10.1080/07853890701881788 ↗
25. Tissue engineering with the aid of inkjet printers10.1517/14712598.7.8.1123 ↗
26. Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications10.1002/adfm.200800040 ↗
27. Making tissue engineering scaffolds work. Review: The application of solid freeform fabrication technology to the production of tissue engineering scaffolds10.22203/eCM.v005a03 ↗
28. Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system10.1089/ten.2006.12.83 ↗
29. Consequences of seeded cell type on vascularization of tissue engineering constructs in vivo10.1016/j.mvr.2009.06.003 ↗
30. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing10.1089/ten.a.2007.0158 ↗
31. Tissue engineering by self-assembly of cells printed into topologically defined structures10.1089/tea.2007.0173 ↗
32. Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography10.1089/ten.2004.10.1316 ↗
33. Three-dimensional bioassembly tool for generating viable tissue-engineered constructs10.1089/ten.2004.10.1566 ↗
34. Evaluation of photocrosslinked lutrol hydrogel for tissue printing applications10.1021/bm801463q ↗
35. Hydrogels as extracellular matrices for skeletal tissue engineering: State-of-the-art and novel application in organ printing10.1089/ten.2006.0175 ↗
36. Printing technology to produce living tissue10.1517/14712598.3.5.701 ↗
37. Microengineering of cellular interactions10.1146/annurev.bioeng.2.1.227 ↗
38. Laser-guided direct writing for applications in biotechnology10.1016/S0167-7799(99)01355-4 ↗
39. Microstamp patterns of biomolecules for high-resolution neuronal networks10.1007/BF02522871 ↗
40. Cellular Micropatterns on Biocompatible Materials10.1021/bp980037b ↗
41. Photo- and electropatterning of hydrogel-encapsulated living cell arrays10.1039/b406953f ↗
42. Geometric control of cell life and death10.1126/science.276.5317.1425 ↗
43. Laser-guided direct writing of living cells10.1002/(SICI)1097-0290(20000205)67:3<312::AID-BIT7>3.0.CO;2-F ↗
44. Cell and organ printing 1: Protein and cell printers10.1002/ar.a.10057 ↗
45. Ringeisen, B.R., Chrisey, D.B., Krizman, D.B., Kim, H., Young, H.D., Wu, P.K., and Spargo, B. (2002, January 2–4). Cell-by-cell construction of living tissue by ambient laser transfer. Madison, WI, USA.
46. Laser printing of pluripotent embryonal carcinoma cells10.1089/107632704323061843 ↗
47. Biological laser printing: A novel technique for creating heterogeneous 3-dimensional cell patterns10.1023/B:BMMD.0000031751.67267.9f ↗
48. Laser printing of single cells: Statistical analysis, cell viability, and stress10.1007/s10439-005-8971-x ↗
49. Biological laser printing of three dimensional cellular structures10.1007/s00339-004-2620-3 ↗
50. High-throughput laser printing of cells and biomaterials for tissue engineering10.1016/j.actbio.2009.09.029 ↗
51. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization10.1016/j.biomaterials.2010.05.055 ↗
52. Human microvasculature fabrication using thermal inkjet printing technology10.1016/j.biomaterials.2009.07.056 ↗
53. Design and implementation of a two-dimensional inkjet bioprinter
54. Development of a three-dimensional bioprinter: Construction of cell supporting structures using hydrogel and state-of-the-art inkjet technology10.1115/1.3002759 ↗
55. Biocompatible inkjet printing technique for designed seeding of individual living cells10.1089/ten.2005.11.1658 ↗
56. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing10.1016/j.biomaterials.2007.09.032 ↗
57. Synthetic multicellular cell-to-cell communication in inkjet printed bacterial cell systems10.1016/j.biomaterials.2010.12.014 ↗
58. Jet-based methods to print living cells10.1002/biot.200600058 ↗
59. Bioprinting by laser-induced forward transfer for tissue engineering applications: Jet formation modeling
60. Laser printing of stem cells for biofabrication of scaffold-free autologous grafts10.1089/ten.tec.2010.0359 ↗
61. Inkjet printing of viable mammalian cells10.1016/j.biomaterials.2004.04.011 ↗
62. Viability and electrophysiology of neural cell structures generated by the inkjet printing method
63. Selective cell delivery for 3D tissue culture and engineering
64. Ink jet printing of mammalian primary cells for tissue engineering applications
65. Integration column: Microwell arrays for mammalian cell culture10.1039/b918172p ↗
66. Cell-cell signaling by direct contact increases cell proliferation via a PI3K-dependent signal10.1016/S0014-5793(02)02370-0 ↗
67. Surface engineering with poly(ethylene glycol) photolithography to create high-density cell arrays on glass10.1021/la035129b ↗
68. An inverted microcontact printing method on topographically structured polystyrene chips for arrayed micro-3-D culturing of single cells10.1016/j.biomaterials.2005.02.032 ↗
69. Microfabricated three-dimensional environments for single cell studies10.1116/1.2190698 ↗
70. Micro-well arrays for 3D shape control and high resolution analysis of single cells10.1039/b704449f ↗
71. The application of 3D micropatterning of agarose substrate for cell culture and in situ comet assays10.1016/j.biomaterials.2010.01.020 ↗
72. Application of inkjet printing to tissue engineering10.1002/biot.200600081 ↗
73. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques10.1089/107632702753503009 ↗
74. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering10.1002/jbm.b.30291 ↗
75. Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing10.1016/j.actbio.2010.09.039 ↗
76. Scaffold-based tissue engineering: Rationale for computer-aided design and solid free-form fabrication systems10.1016/j.tibtech.2004.05.005 ↗
77. Rapid prototyping and manufacturing for tissue engineering scaffolds10.1504/IJCAT.2009.026664 ↗
78. Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system10.1016/S0928-4931(02)00010-3 ↗
79. Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques10.1023/A:1016189724389 ↗
80. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering10.1016/S0142-9612(02)00139-4 ↗
81. Characterization of the flow behavior of alginate/hydroxyapatite mixtures for tissue scaffold fabrication10.1088/1758-5082/1/4/045005 ↗
82. Modeling of the flow rate in the dispensing-based process for fabricating tissue scaffolds10.1115/1.2789725 ↗
83. Modeling of flow rate, pore size, and porosity for the dispensing-based tissue scaffolds fabrication10.1115/1.3123331 ↗
84. Mookerjee, A., Cohen, D.L., Peng, D.H., Bonassar, L.J., and Lipson, H. (2009, January 3–5). A study of variable stiffness alginate printing for medical applications. Austin, TX, USA.
85. Additive manufacturing for in situ repair of osteochondral defects10.1088/1758-5082/2/3/035004 ↗
86. The role of printing parameters and scaffold biopolymer properties in the efficacy of a new hybrid nano-bioprinting system10.1088/1758-5082/1/3/035003 ↗
87. A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds10.1088/1758-5082/1/4/045002 ↗
88. Direct-write assembly of 3D hydrogel scaffolds for guided cell growth10.1002/adma.200803702 ↗
89. Ink jet three-dimensional digital fabrication for biological tissue manufacturing: Analysis of alginate microgel beads produced by ink jet droplets for three dimensional tissue fabrication10.2352/J.ImagingSci.Technol.(2008)52:6(060201) ↗
90. Nakamura, M., Nishiyama, Y., and Henmi, C. (2008, January 6–9). 3D Micro-fabrication by inkjet 3D biofabrication for 3D tissue engineering. Nagoya, Japan.10.1109/MHS.2008.4752495 ↗
91. Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications10.1016/j.actbio.2010.10.023 ↗
92. Laser fabrication of three-dimensional CAD scaffolds from photosensitive gelatin for applications in tissue engineering10.1021/bm1015305 ↗
93. Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer-assisted design combined with computer-guided 3D plotting of polymers and reactive oligomers10.1002/1439-2054(20001001)282:1<17::AID-MAME17>3.0.CO;2-8 ↗
94. Properties of porous structures prepared by stereolithography using a polylactide resin10.1016/j.jconrel.2008.09.066 ↗
95. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth10.1002/jbm.b.10485 ↗
96. Direct construction of a three-dimensional structure with cells and hydrogel10.1177/0883911505053658 ↗
97. Porous scaffold design for tissue engineering10.1038/nmat1421 ↗
98. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity10.1016/j.jbiomech.2003.09.029 ↗
99. Development of an effective three dimensional fabrication technique using inkjet technology for tissue model samples
100. Three-dimensional tissue fabrication10.1016/j.addr.2004.05.001 ↗